From the Sector

Reset
127 results
26.10.2021

We aRe SpinDye with its resource-saving dyeing technology in new collaboration

With its resource-saving dyeing technology, We aRe SpinDye takes place in H&M's latest Innovation Stories collection called Co-exist.

The use of We aRe SpinDye's technology contributes to reducing both water consumption and CO2 emissions, which in turn leads to a lower impact on the world's ecosystem and creates conditions for our co-existence with nature.

Up to 24% of a garment's entire climate footprint occurs during dyeing. We aRe SpinDye's technology can reduce the consumption of the earth's resources in textile production. On average, the reduction of water is -75%, chemicals -90% and energy consumption and CO2 emissions -30%.

In just one year, the clothing industry uses 9 billion cubic meters of water (which is in line with the annual need for drinkingwater for the entire population of our planet) and 168 million tons of process chemicals to dye fabrics. We aRe SpinDye now hopes that more players in the industry will pay attention to the ways that are available when it comes to resource-efficient dyeing process and quickly implement this technology in their production.

With its resource-saving dyeing technology, We aRe SpinDye takes place in H&M's latest Innovation Stories collection called Co-exist.

The use of We aRe SpinDye's technology contributes to reducing both water consumption and CO2 emissions, which in turn leads to a lower impact on the world's ecosystem and creates conditions for our co-existence with nature.

Up to 24% of a garment's entire climate footprint occurs during dyeing. We aRe SpinDye's technology can reduce the consumption of the earth's resources in textile production. On average, the reduction of water is -75%, chemicals -90% and energy consumption and CO2 emissions -30%.

In just one year, the clothing industry uses 9 billion cubic meters of water (which is in line with the annual need for drinkingwater for the entire population of our planet) and 168 million tons of process chemicals to dye fabrics. We aRe SpinDye now hopes that more players in the industry will pay attention to the ways that are available when it comes to resource-efficient dyeing process and quickly implement this technology in their production.

"The enormous resource consumption in the dyeing process is a global problem that must be addressed on a broad front. It is therefore inspiring to work with major brands with an organization that is sensitive to cutting-edge expertise and at the same time shows a willingness to work together to achieve common goals", says Andreas Andrén, CEO of We aRe SpinDye.

Source:

We aRe SpinDye

18.10.2021

SABIC presents new Portfolio for Nonwovens at INDEX

SABIC has announced that the newly formed Hygiene & Healthcare segment of its Petrochemicals business will showcase its extensive portfolio of SABIC PURECARES™ polypropylene (PP) and polyethylene (PE) polymers for high-purity nonwovens and hygiene films at the upcoming INDEX™ Expo in Geneva, Switzerland, from October 19 through 22, 2021. The company will also present enabling solutions developed with partners to address the issue of plastic waste and support the transformation of the industry towards a circular economy with closed-loop initiatives and certified circular polymers under its TRUCIRCLE™ portfolio and services.

SABIC has announced that the newly formed Hygiene & Healthcare segment of its Petrochemicals business will showcase its extensive portfolio of SABIC PURECARES™ polypropylene (PP) and polyethylene (PE) polymers for high-purity nonwovens and hygiene films at the upcoming INDEX™ Expo in Geneva, Switzerland, from October 19 through 22, 2021. The company will also present enabling solutions developed with partners to address the issue of plastic waste and support the transformation of the industry towards a circular economy with closed-loop initiatives and certified circular polymers under its TRUCIRCLE™ portfolio and services.

During INDEX, SABIC will exhibit a wide range of PP polymers targeted at these needs. Highlights on display will include dedicated PP and PE grades for lightweight nonwoven fabrics using the latest spunbond and meltblown processes, and a new ultra-high melt flow PP product engineered for meltblown fibers in nonwoven fabrics. The nonwoven focus will be complemented by industry proven polyolefins for cast and blown film applications in hygiene webs and laminates, providing desirable back and top sheet properties such as water tightness, breathability and elasticity.

In addition, SABIC will also present ISCC Plus certified fiber and film polymers based on circular and renewable PP and PE polymer technology as part of the company’s TRUCIRCLE portfolio for advancing the transformation of the plastics industry from a linear to a truly circular economy. Examples of this comprehensive initiative include collaborations with various market leaders in the field. Together with Fibertex Personal Care, one of the world’s largest manufacturers of spunbond nonwovens for the hygiene industry, SABIC is creating a range of high-purity nonwovens for the hygiene market using ISCC PLUS certified circular PP polymer derived from post-consumer plastic waste. In another project, Fraunhofer Institute, SABIC and Procter & Gamble (P&G) joined forces to develop and demonstrate the feasibility of an advanced close-loop recycling process for used nonwoven facemasks.

Source:

SABIC / Marketing Solutions NV

13.10.2021

Ralph Lauren and Dow release manual for dyeing processes

Dow and Ralph Lauren Corporation released a detailed manual on how to dye cotton more sustainably and more effectively than ever before using ECOFAST™ Pure Sustainable Textile Treatment. With this manual, Ralph Lauren and Dow are open-sourcing this improved dyeing process to encourage adoption in the textile industry and help standardize a more sustainable and efficient cotton dyeing system for positive environmental impact.  

The co-developed, step-by-step manual details how to use ECOFAST™ Pure, a cationic cotton treatment developed by Dow, with existing dyeing equipment. Ralph Lauren, the first brand to use ECOFAST™ Pure, partnered with Dow to optimize and implement the technology in its cotton dyeing operations as part of its new Color on Demand platform.

Dow and Ralph Lauren Corporation released a detailed manual on how to dye cotton more sustainably and more effectively than ever before using ECOFAST™ Pure Sustainable Textile Treatment. With this manual, Ralph Lauren and Dow are open-sourcing this improved dyeing process to encourage adoption in the textile industry and help standardize a more sustainable and efficient cotton dyeing system for positive environmental impact.  

The co-developed, step-by-step manual details how to use ECOFAST™ Pure, a cationic cotton treatment developed by Dow, with existing dyeing equipment. Ralph Lauren, the first brand to use ECOFAST™ Pure, partnered with Dow to optimize and implement the technology in its cotton dyeing operations as part of its new Color on Demand platform.

Conventional fabric dyeing processes require trillions of liters of water each year, generating roughly 20% of the world’s wastewater.1, 2 Pretreating fabric with ECOFAST™ Pure helps significantly reduce the amount of water, chemicals and energy needed to color cotton, by enabling up to 90% less process chemicals, 50% less water, 50% less dyes and 40% less energy without sacrificing color or quality.3

Ralph Lauren began integrating Color on Demand into its supply chain earlier this year and first launched product utilizing ECOFAST™ Pure as part of the Company’s Team USA collection for the Olympic & Paralympic Games Tokyo 2020. Designed to help address water scarcity and pollution caused by cotton dyeing, Color on Demand is a multi-phased system with a clear ambition to deliver over time the world’s first scalable zero wastewater cotton dyeing system. By 2025, the brand aims to use the Color on Demand platform to dye more than 80% of its solid cotton products.

 

1 Drew, Deborah and Genevieve Yehounme. “The Apparel Industry’s Environmental Impact in 6 Graphics.” World Resources Institute, July 5, 2017. https://www.wri.org/blog/2017/07/apparel-industrys-environmental-impact-6-graphics
2 Rep. A New Textiles Economy: Redesigning Fashion’s Future. Ellen MacArthur Foundation, Circular Fibres Initiative, 2017. https://ellenmacarthurfoundation.org/a-new-textiles-economy
3 A full third-party reviewed and validated life cycle assessment is available by request at www.dow.com/ecofast.

 

Source:

Dow / G&S Business Communications

12.10.2021

Elleti and Itema at Première Vision in Milan

Elleti Group, an Italian manufacturer specialized in denim treatments and garment making, will present an innovative approach: how we experience denim and its transformation processes.

Elleti Group, an Italian manufacturer specialized in denim treatments and garment making, will present an innovative approach: how we experience denim and its transformation processes.

Elleti Group will display its “Green Replicants” project in a new and improved “Lighter. Better. Wiser.” edition.  This project, inaugurated a few years ago, recreates some of the iconic pieces from the Elleti Group Museum of Denim (dating back to the 19th century) with today’s most advanced environmentally sustainable technologies. This special edition replicas are fully developed using the latest addition to the sustainable tools of the company: the “Wiser Wash” technology, a patented washing method that eliminates the use of all potentially harmful chemicals and pumice stone, while drastically reducing the water consumption throughout the process.
 
Moreover, at the Immaterial M.O.D.E. booth, a special project designed by Denim Première Vision and realized in collaboration with Elleti Group and Sense – Immaterial Reality will take visitors through an Augmented Reality installation to explore a selection of legendary pieces from M.O.D.E., Museum of Denim by Elleti Group. By downloading the app, available on every digital store, on your phone or tablet and looking out for the signage on site, unique denim masterpieces will be at everyone’s fingertips.

Itema, a worldwide manufacturer of weaving solutions, will be for the first time at the Denim Première Vision fair. The company is renowned in the industry to be one of the only manufacturers to produce all the top three weft insertion technologies – rapier, air-jet and projectile.

The company will highlight the iSAVER® technology: designed by Itemalab®, the Itema advanced innovation company. Thanks to iSAVER®, one thousand kilos of cotton per loom a year will be saved – i.e. 3% of total raw materials – which will prevent wasting 20 million litres of water, while saving costs for about €2.000 a year on each loom. iSAVER® significantly contributes in making the denim production greener.

Source:

Menabò Group srl

01.10.2021

Archroma celebrates 8 Years of creating positive impact

Archroma celebrates 8 years of leading the way to a sustainable world, with innovations and solutions aimed at creating added value sustainable for its partners, consumers and the planet.

Archroma came to life on 1st October 2013 from textile, paper and emulsions businesses acquired from Clariant by SK Capital Partners.
Building on decades of commitment to developing safer eco-friendlier chemistry, Archroma has become in the past 8 years a prominent name for more sustainable colors and performance, collaborating with leading brands such as Primark, G-Star, Patagonia, Esprit and more.

Archroma has introduced innovations, such as the EarthColors® made from non-edible plant waste from the food and herbal industry, Denisol® Pure, an indigo for aniline-free* denim, aniline being a category 2 carcinogen substance, and Smartrepel®, a PFC-free* water repellent solution. The company is also about to launch a new plant-based softener.

Archroma celebrates 8 years of leading the way to a sustainable world, with innovations and solutions aimed at creating added value sustainable for its partners, consumers and the planet.

Archroma came to life on 1st October 2013 from textile, paper and emulsions businesses acquired from Clariant by SK Capital Partners.
Building on decades of commitment to developing safer eco-friendlier chemistry, Archroma has become in the past 8 years a prominent name for more sustainable colors and performance, collaborating with leading brands such as Primark, G-Star, Patagonia, Esprit and more.

Archroma has introduced innovations, such as the EarthColors® made from non-edible plant waste from the food and herbal industry, Denisol® Pure, an indigo for aniline-free* denim, aniline being a category 2 carcinogen substance, and Smartrepel®, a PFC-free* water repellent solution. The company is also about to launch a new plant-based softener.

The company started to develop holistic solutions designed to bring innovation and performance, whilst reducing the impacts on water, energy and other natural resources. The savings generated by these 70+ system solutions are demonstrated by Archroma's proprietary ONE WAY Impact Calculator, a tool launched in 2012 and continuously upgraded to simulate and optimize the footprint of application processes.

Archroma also recently launched CASUAL X SMART, a sulfur dyeing system for trendy wash-down effects to make clothes that look smart at home and at work. The colors won't fade in the washing cycle, and the application process allows resource savings of up to 33% water, 21% energy and 35% chemical usage compared to a benchmark reactive & pigment garment dyeing.

With ONE WAY, a brand can calculate how much impact their current production and the Archroma Way collection will have on water, energy, chemical, raw material or CO2 footprint.

nova-Institute and YNCORIS are presenting the innovation award 2022: "Best CO2 Utilisation" (c) nova-Institut GmbH
30.09.2021

nova-Institute and YNCORIS are presenting the innovation award 2022: "Best CO2 Utilisation"

nova-Institute and YNCORIS together with CO2 Value Europe are looking forward to applications for the innovation award “Best CO2 Utilisation 2022”. The award will be granted at the well-established “Conference on CO2-based Fuels and Chemicals”, 23–24 March 2022 in Cologne.

With the innovation award “Best CO2 Utilisation 2022” together with YNCORIS and CO2 Value Europe, the nova-Institute offers innovators in the CCU field the unique opportunity to present and market their carbon capture or carbon utilisation (Power-to-X) technology, CO2-based fuel or chemical at one of the leading conferences on CO2 as a raw material. The only requirement for participation in the competition is that the product is already on the market or about to be launched in near future.

nova-Institute and YNCORIS together with CO2 Value Europe are looking forward to applications for the innovation award “Best CO2 Utilisation 2022”. The award will be granted at the well-established “Conference on CO2-based Fuels and Chemicals”, 23–24 March 2022 in Cologne.

With the innovation award “Best CO2 Utilisation 2022” together with YNCORIS and CO2 Value Europe, the nova-Institute offers innovators in the CCU field the unique opportunity to present and market their carbon capture or carbon utilisation (Power-to-X) technology, CO2-based fuel or chemical at one of the leading conferences on CO2 as a raw material. The only requirement for participation in the competition is that the product is already on the market or about to be launched in near future.

29.09.2021

Lenzing presented its sustainable processes at FILO

Lenzing presented at FILO its sustainable approach and on a selection of key innovations such as TENCEL™-branded specialty fibers.

As part of the space dedicated to Cittadellarte – Fondazione Pistoletto and Fashion B.E.S.T., the first Italian collective of responsible fashion designers, a selection of TENCEL™’s key technologies were under the spotlight:

Lenzing presented at FILO its sustainable approach and on a selection of key innovations such as TENCEL™-branded specialty fibers.

As part of the space dedicated to Cittadellarte – Fondazione Pistoletto and Fashion B.E.S.T., the first Italian collective of responsible fashion designers, a selection of TENCEL™’s key technologies were under the spotlight:

  • TENCEL™ x REFIBRA™, using cotton textile waste and wood pulp as the feedstock for cellulosic fibers, creating a circular solution;
  • TENCEL™ x Indigo Color, infusing pigment into fibers directly during the spinning process;
  • TENCEL™ Luxe, providing superior aesthetics, performance and comfort to be the perfect partner of other noble fibers such as silk, cashmere or wool;
  • TENCEL™ Carbon Zero, offering carbon-zero CarbonNeutral®-certified products by Natural Capital Partners;
  • TENCEL™ x Eco Clean, bringing totally chlorine-free-bleached TENCEL™ Modal fibers to the textile industry.

Lenzing's priority has been to produce fibers for many sectors (fashion, beauty care, cleaning, hygiene and home textiles) in a sustainable way. Each Lenzing product is made of cellulose from wood, a renewable natural resource, coming only from certified sustainable sources.
The Lenzing Group operates two commercial-scale biorefineries with 100% wood utilization, which ensure that the totality of wood constituents are used to produce fibers, biobased chemicals, and bioenergy, thus maximizing value creation from an economic and environmental perspective. This concept was illustrated by Carlo Covini, Lenzing Business Development Manager Italy & Switzerland, in his presentation “Lenzing’s biorefinery concept”.

Source:

Menabò Group

29.09.2021

The Renewable Materials Conference 2022

  • 10–12 May 2022, Cologne, Germany (hybrid)
  • The unique concept of presenting all renewable material solutions at one event hits the mark: bio-based, CO2-based and recycled are the only alternatives to fossil-based chemicals and materials

Ready-to-use fossil-free sustainable material solutions with a low carbon footprint are in fast-growing demand. Innovative brand owners are keeping an eye out for such solutions, in particular those that will soon reach the mainstream.

  • 10–12 May 2022, Cologne, Germany (hybrid)
  • The unique concept of presenting all renewable material solutions at one event hits the mark: bio-based, CO2-based and recycled are the only alternatives to fossil-based chemicals and materials

Ready-to-use fossil-free sustainable material solutions with a low carbon footprint are in fast-growing demand. Innovative brand owners are keeping an eye out for such solutions, in particular those that will soon reach the mainstream.

For the second time, nova-Institute presents numerous market highlights from bio- and CO2-based chemicals and materials as well as from chemical recycling: All material solutions based on renewable carbon. Together, there is sufficient potential to completely replace petrochemicals by 2050. To tackle climate change at its roots, all additional fossil carbon from the ground must be substituted with renewable alternatives. Over the course of three days, participants will get a comprehensive overview of the latest developments in the renewable material sector, with a focus on industry-ready solutions from a wide spectrum of sustainable raw materials and technologies.

In 2021, the new concept of the Renewable Materials Conference generated an outstanding response, which exceeded all expectations: 420 online participants witnessed a firework of innovations of non-fossil material. 60 speakers, 11 panel discussions, 500 public posts and 1,500 networking activities were proof of the lively exchange during the three conference days.

In 2022, nova-Institute plans to host the conference physically in the heart of Germany's fourth largest city, Cologne, just a few hours away from France, Belgium and the Netherlands. Expected are 400 participants on-site and many more online. On-site, the conference will be accompanied by a large exhibition where companies and institutes can showcase their recent developments. The supporting program, networking activities and many secluded spots at the location offers excellent opportunities to make new business contacts and refresh old ones.

The focus of the conference: All material solutions based on renewable carbon – avoiding the use of additional fossil carbon. The entire spectrum of renewable materials is covered: bio-based, CO2- based and recycled.

The program includes a diverse range of bio-based materials such as bio-based polymers, plastics and biocomposites (first and second generation, biowaste), CO2-based materials (from fossil and biogenic point sources, atmosphere) as well as mechanically and chemically recycled materials.

Source:

nova-Institut GmbH

24.09.2021

50 companies have joined ChemSec’s PFAS Movement

More and more brands are actively speaking up against the use of PFAS chemicals in products and supply chains. ChemSec’s corporate initiative the PFAS Movement was started in 2020, with the aim of creating a network of companies that would like to see PFAS chemicals regulated more efficiently. As of September 2021, 50 companies have joined the movement.

PFAS, short for per- and polyfluoroalkyl substances, is a chemical family consisting of almost 5,000 industrially produced chemicals. In manufacturing, PFAS are favored for their durability and well-functioning properties. They provide features such as non-stick, water repellency and anti-grease to many types of everyday products, including cosmetics, food packaging, frying pans and clothes, just to name a few.

Lately, more and more reports have been suggesting that PFAS are a serious problem. Human epidemiological studies have found associations between PFAS exposure and a number of health disorders.

More and more brands are actively speaking up against the use of PFAS chemicals in products and supply chains. ChemSec’s corporate initiative the PFAS Movement was started in 2020, with the aim of creating a network of companies that would like to see PFAS chemicals regulated more efficiently. As of September 2021, 50 companies have joined the movement.

PFAS, short for per- and polyfluoroalkyl substances, is a chemical family consisting of almost 5,000 industrially produced chemicals. In manufacturing, PFAS are favored for their durability and well-functioning properties. They provide features such as non-stick, water repellency and anti-grease to many types of everyday products, including cosmetics, food packaging, frying pans and clothes, just to name a few.

Lately, more and more reports have been suggesting that PFAS are a serious problem. Human epidemiological studies have found associations between PFAS exposure and a number of health disorders.

One of the biggest challenges connected to PFAS is that, with very few exceptions, they are perfectly legal to use. This means that the brands and retailers who want to stop them from being used as ingredients in their products have very limited ways of communicating this in the global supply chain. As long as there is not a restriction in place, suppliers will continue to use these very effective chemicals in manufacturing. That’s why companies act together with a unified voice, like in the case of ChemSec’s PFAS Movement.

Source:

ChemSec

(c) Archroma
23.09.2021

Archroma: Online regulatory & compliance platform

  • Instant access to ecotoxicological and regulatory information and certificates for Archroma specialty chemical products
  • Faster decision-making and time-to-market for manufacturers, brands and retailers in the textile, paper, packaging, paint, and construction industries

Archroma, a global leader in specialty chemicals towards sustainable solutions, announced the launch of The Safe Edge, an online platform for instant access to product related regulatory & compliance certificates and information.

With continuously growing public awareness around the social, health and ecological impacts of human and business activities, the need for transparency and traceability in supply chains has become essential.

Time to market is equally critical, and manufacturers, brands and retailers need access to reliable information in real time.

  • Instant access to ecotoxicological and regulatory information and certificates for Archroma specialty chemical products
  • Faster decision-making and time-to-market for manufacturers, brands and retailers in the textile, paper, packaging, paint, and construction industries

Archroma, a global leader in specialty chemicals towards sustainable solutions, announced the launch of The Safe Edge, an online platform for instant access to product related regulatory & compliance certificates and information.

With continuously growing public awareness around the social, health and ecological impacts of human and business activities, the need for transparency and traceability in supply chains has become essential.

Time to market is equally critical, and manufacturers, brands and retailers need access to reliable information in real time.

The Safe Edge platform has been designed with that in mind: It allows brands, retailers and manufacturers of textile, fashion, packaging, paper, paints, to verify with just a few clicks the regulatory & compliance status of Archroma products, including regulations, ecotoxicological information & certifications, and brand requirements.

The Safe Edge covers standards, regulations and information such as air emission factors, animal origin, halal, kosher, plant origin, food contact, Blue Angel, bluesign®, Cradle-to-Cradle, chemical inventories, Composability EN 13432, conflict minerals, EU Flower/Ecolabel, GOTS, CONEG, ISEGA, Nordic Swan, Oekotex® Standard 100, California Prop 65, REACH, RoHS (Restriction of Hazardous Substance), Screened Chemistry, SDS, SVHC (Substance of Very High Concern), VOC (US), ZDHC (Zero Discharge Hazardous Chemicals), and brand standards (like Coats A&F MRSL, Decathlon RSL 2020, Jack Wolfskin RSL and The List IV by Inditex.

With the launch of The Safe Edge, Archroma continues to assert its leading role in driving sustainability in its industries, in line with its commitment to the principles of “The Archroma Way to a Sustainable World: safe, efficient, enhanced, it’s our nature”. The “Safe” principle in particular is at the core of the Archroma approach to sustainability, with the deeply rooted goal to protect people and the planet with products that are safe to use, and safe to wear.

The Safe Edge is already accessible for manufacturers, brands and retailers in Europe and Asia, and will be launched in North America in September 2021, and in Latin America by the end of the year.

More information:
Archroma online platform
Source:

Archroma

15.09.2021

REACH4Textiles: Better market surveillance for textile products

The REACH4texiles project just kicked off. Funded by the European Commission, it aims at exploring solutions for fair and effective market surveillance on textile products.

Every year, about 28 billion of garments circulate across Europe, 80% of which are imported from outside the EU and its jurisdiction.
 
Inevitably, such huge volumes pose enormous challenges for market surveillance authorities which are called to ensure that uncompliant dangerous products are kept away from the EU citizens.

The European Union has the world most comprehensive chemical legislation which is set to protect consumers, the environment and, theoretically, even the competitiveness  of the business.

Such EU chemical legislation evolves constantly, increasing scope and ambition. New restrictions impact authorities and sectors like the European textile value chain and generate new costs for all actors.

Evidence suggests that such advanced regulatory framework is not completed with an equally advanced or effective EU-wide control system capable of ensuring compliance, especially in the case of imported products.

The REACH4texiles project just kicked off. Funded by the European Commission, it aims at exploring solutions for fair and effective market surveillance on textile products.

Every year, about 28 billion of garments circulate across Europe, 80% of which are imported from outside the EU and its jurisdiction.
 
Inevitably, such huge volumes pose enormous challenges for market surveillance authorities which are called to ensure that uncompliant dangerous products are kept away from the EU citizens.

The European Union has the world most comprehensive chemical legislation which is set to protect consumers, the environment and, theoretically, even the competitiveness  of the business.

Such EU chemical legislation evolves constantly, increasing scope and ambition. New restrictions impact authorities and sectors like the European textile value chain and generate new costs for all actors.

Evidence suggests that such advanced regulatory framework is not completed with an equally advanced or effective EU-wide control system capable of ensuring compliance, especially in the case of imported products.

The REACH4texiles project aims at exploring solutions for fair and effective market surveillance on textile products; it pools together the key actors to address three objectives:

  • Keep non-compliant products away from the single market.
  • Increase skills and knowledge.
  • Support a Network addressing chemicals in textiles and applying the EU regulation 2019/1020

The 2 years project will share best practices, identify efficient approaches against non-compliant products, offer training and support for a more effective surveillance and for level playing field.

The project welcomes collaboration with concerned authorities across the EU Member States.

Details:

A well-functioning EU market surveillance system is an essential prerequisite to protect citizen, the environment and competitiveness of responsible business. When it comes to textiles, the broad range of products, the large set of REACH subjected chemicals used in textiles as well as industrial strategies like fast fashion make this a challenging task.

Challenges may include lack of resources, difficulties in identifying higher risk products, cost and management of chemical tests, lack of test methods and knowledge of best practices. These challenges are yet likely to increase with the upcoming REACH restrictions and the growth of e-commerce.

Because of this, products that do not comply with REACH regulations encounter today little or no barriers to enter the market. This creates not only a health risk for Europeans but also undermines the competitivity of responsible businesses that take all necessary measures to comply with these regulations.

Addressing the challenges requires more knowledge at market surveillance and stronger collaboration between these authorities, the textile and clothing industry and testing laboratories. More knowledge about the identification of risk baring textile products and REACH chemicals likely to be used in these products, suitable test methods and strategies such as fast screening on REACH chemicals, trustworthiness of labels, etc can increase the effectiveness of market surveillance considerably.

The REACH4Textiles first objective (keep non-compliant products away from the EU Market) will be pursued by increasing knowledge on market surveillance functioning by and working on a risk-based approach to identify products at higher risk.

The second objective supports a network to address the specificities of chemicals in textiles with market surveillance authorities and involving other relevant stakeholders. The third objective focuses on sharing knowledge with market surveillance actors on textile products and suitable test methodologies.

Supported by the European Commission DG Growth, the project team is coordinated by the Belgian test and research center Centexbel and include the European Textiles and Apparel industry confederation, EURATEX, the German national textile and fashion association Textile und Mode, t+m, the Italian association Tessile e Salute. Several other European industry associations and national authorities are welcomed to become involved through the project activities.   

More information:
Euratex market surveillance Import
Source:

Euratex

(c) Officina+39
31.08.2021

Officina+39 presents Better Seasons collection at Munich Fabric Start

The Italian company Officina+39 will be at Bluezone’s KEYHOUSE area to present its latest sustainable achievements in the field of research and chemical application for the textile sector as well as The Circle Book 2, a special project with circularity as main focus.  
 
For the first time since Covid-19 pandemic hit the world, Munich Fabric Start returns to host some of the most renowned international players in the textile and fashion industry, showcasing their latest innovations. From August 31 to September 1, Officina+39 will step into the Bluezone’s KEYHOUSE area, the interactive hub featuring futuristic solutions with a high level of innovation for the textile supply chain, to present its Better Seasons collection as well as its most recent developments.
 

The Italian company Officina+39 will be at Bluezone’s KEYHOUSE area to present its latest sustainable achievements in the field of research and chemical application for the textile sector as well as The Circle Book 2, a special project with circularity as main focus.  
 
For the first time since Covid-19 pandemic hit the world, Munich Fabric Start returns to host some of the most renowned international players in the textile and fashion industry, showcasing their latest innovations. From August 31 to September 1, Officina+39 will step into the Bluezone’s KEYHOUSE area, the interactive hub featuring futuristic solutions with a high level of innovation for the textile supply chain, to present its Better Seasons collection as well as its most recent developments.
 
The new collection embodies the company’s pillars of Trustainable approach – innovation, sustainable practices, clean information, transparency and social responsibility –, delivering a selection of bold, colorful and conscious solutions for the textile industry. These explore better ways to produce and use less through cuttingedge technologies, specifically developed to reduce the use of energy and hazardous chemicals while increasing waste recycling and water conservation.

More information:
Officina+39 munich fabric start
Source:

Menabò Group srl for Officina+39

30.08.2021

The Renewable Carbon Initiative RCI is joining forces

  • From fossil to renewable materials: Members advocate policy analysis and focused implementation of the renewable carbon strategy

The members of the Renewable Carbon Initiative (RCI) (www.renewable-carbon-initiative.com), founded in September 2020, have joined forces to shape the transition from the fossil to the renewable age for the chemical and materials industry. This means spreading the concept of renewable carbon and developing new value chains based on renewable carbon as a feedstock.

In the meantime, several activities have started from which future members can benefit as well. First and foremost is the kick-off to comprehensive policy analysis. What influence will forthcoming regulation have on chemicals, plastics, and other materials? When and where should the renewable carbon idea be emphasized and referred to?

The policy analysis will examine pending policies in the European Union – and a later expansion to America and Asia is planned as well.

  • From fossil to renewable materials: Members advocate policy analysis and focused implementation of the renewable carbon strategy

The members of the Renewable Carbon Initiative (RCI) (www.renewable-carbon-initiative.com), founded in September 2020, have joined forces to shape the transition from the fossil to the renewable age for the chemical and materials industry. This means spreading the concept of renewable carbon and developing new value chains based on renewable carbon as a feedstock.

In the meantime, several activities have started from which future members can benefit as well. First and foremost is the kick-off to comprehensive policy analysis. What influence will forthcoming regulation have on chemicals, plastics, and other materials? When and where should the renewable carbon idea be emphasized and referred to?

The policy analysis will examine pending policies in the European Union – and a later expansion to America and Asia is planned as well.

A particular focus will be placed on upcoming policies and regulations and how they impact renewable carbon. The members are currently deciding on where to start specifically, but questions that may be considered are: What does the new climate law and the “Fit for 55-Package” mean for chemicals and materials? What can be expected from REACH and microplastics restrictions? How relevant is the “Sustainable Products Initiative” and the coming restrictions for Green Claims? Circular Economy, Zero Pollution and Sustainable Financing are keywords of the future European landscapes, which might become very concrete for chemistry and materials in the next few years. To what extent the concept of renewable carbon for materials is considered in policy already and how it could be further introduced in future legislation are two of the main questions investigated in the working group “Policy”.

This working group is open to all members of RCI. Policy experts provide the respective analysis as a foundation, organising discussions between members of the policy group and plan meetings with policymakers to introduce the Renewable Carbon concept.

Additional working groups have been created, one with a focus on communication, the other looking at the development of a renewable carbon label. In early September, a renewable carbon community will be launched as a starting point for even more interaction between the members, to discuss strategies, create new value chains and start project consortia.

The Renewable Carbon Initiative (RCI) is a dynamic and ambitious group of interested parties. Membership numbers have now more than doubled since the launch almost a year ago, with RCI now boasting 25 members, 6 partners and over 200 supporters. It welcomes all companies that are on the way to transform their resource base from fossil to renewable.

More information:
Renewable Carbon Initiative
Source:

nova-Institut für politische und ökologische Innovation GmbH für RCI

26.08.2021

Conference on CO2-based Fuels and Chemicals 2022

  • Call for Papers and Posters

More than 200 leading international experts in Carbon Capture and Carbon Utilisation (Power-to-X) together with 20 exhibitors are expected to attend the hybrid event on 23–24 March 2022, in Cologne, Germany

Main topics of the conference are strategy & policy in CCU, renewable energy and green hydrogen production, carbon capture technologies, CO2-based fuels for transport and aviation, CO2-based building blocks, bulk and fine chemicals as well as advanced CCU technologies.

Carbon Capture and Utilisation (CCU) is one essential pillar for the supply of renewable carbon besides biomass utilisation and recycling. The transition to the direct use of CO2 as one alternative carbon source is needed as a key element to substitute fossil sources, to fight climate change and to shift towards sustainable and climate-friendly production and consumption. For providing the full benefits of CCU technologies the use of renewable energy is indispensable.

  • Call for Papers and Posters

More than 200 leading international experts in Carbon Capture and Carbon Utilisation (Power-to-X) together with 20 exhibitors are expected to attend the hybrid event on 23–24 March 2022, in Cologne, Germany

Main topics of the conference are strategy & policy in CCU, renewable energy and green hydrogen production, carbon capture technologies, CO2-based fuels for transport and aviation, CO2-based building blocks, bulk and fine chemicals as well as advanced CCU technologies.

Carbon Capture and Utilisation (CCU) is one essential pillar for the supply of renewable carbon besides biomass utilisation and recycling. The transition to the direct use of CO2 as one alternative carbon source is needed as a key element to substitute fossil sources, to fight climate change and to shift towards sustainable and climate-friendly production and consumption. For providing the full benefits of CCU technologies the use of renewable energy is indispensable.

Especially the supply of green hydrogen is crucial for the production of CO2-based fuels for transportation and aviation as well as for bulk and fine chemicals.

The “Conference on CO2-based Fuels and Chemicals 2022”, 23–24 March 2022, Cologne, Germany. As a hybrid conference it combines a “live” in-person event with a “virtual” online component, www.co2-chemistry.eu.

More information:
CO2
Source:

nova-Institut GmbH

Cinte Techtextil China 2022 confirmed for September (c) Messe Frankfurt (HK) Ltd
17.08.2021

Cinte Techtextil China 2022 confirmed for September

The 2022 edition of Cinte Techtextil China has been confirmed to take place from 6 – 8 September at the Shanghai New International Expo Centre. 2021 saw 366 exhibitors and 14,868 visits recorded at the June hybrid event, which offered in-person and digital options for suppliers and buyers.

This year’s edition of Cinte Techtextil China marked the first time the fair was held annually, and the second year physical and online participation options were available, with both aspects well received by exhibitors and visitors.

The 2022 edition of Cinte Techtextil China has been confirmed to take place from 6 – 8 September at the Shanghai New International Expo Centre. 2021 saw 366 exhibitors and 14,868 visits recorded at the June hybrid event, which offered in-person and digital options for suppliers and buyers.

This year’s edition of Cinte Techtextil China marked the first time the fair was held annually, and the second year physical and online participation options were available, with both aspects well received by exhibitors and visitors.

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd elaborated: “The response from our exhibitors this year was the Chinese market is still growing strongly, and having an annual edition allows them to benefit from these opportunities on a more regular basis. The domestic economy has shown strong resilience over 2020 and so far in 2021, and this has allowed the technical textiles and nonwovens sector to maintain the growth momentum it has experienced over the past years. As more economies return to normal in 2022, we expect export orders for the sector to receive a further boost which will benefit those overseas companies with business in the Chinese market.”

Cinte Techtextil China’s product categories cover 12 application areas, which comprehensively span the full range of potential uses of modern technical textiles and nonwovens. These categories also span the entire industry, from upstream technology and raw materials providers to finished fabrics, chemicals and other solutions.

Officina+39 becomes a BLUESIGN partner (c) Officina+39
04.08.2021

Officina+39 becomes a BLUESIGN partner

Officina+39, an Italian company specialized in research and chemical application in the textile and fashion sector, has joined the BLUESIGN's network of chemical excellences.

This landmark confirms a longstanding pledge to minimize environmental impacts by envisioning and developing forefront solutions and technologies that reduce the use of energy and hazardous chemicals, while increasing waste recycling and water conservation. Together with the high-profile players involved who share BLUESIGN’s purposes, the company will work to ensure a responsible use of resources and to guarantee the highest possible degree of consumer protection.

Eager to constantly grow and improve, Officina+39 has recently extended its commitment to innovation to its own Headquarters too, by moving to a brand new facility in Biella (Italy).

Officina+39, an Italian company specialized in research and chemical application in the textile and fashion sector, has joined the BLUESIGN's network of chemical excellences.

This landmark confirms a longstanding pledge to minimize environmental impacts by envisioning and developing forefront solutions and technologies that reduce the use of energy and hazardous chemicals, while increasing waste recycling and water conservation. Together with the high-profile players involved who share BLUESIGN’s purposes, the company will work to ensure a responsible use of resources and to guarantee the highest possible degree of consumer protection.

Eager to constantly grow and improve, Officina+39 has recently extended its commitment to innovation to its own Headquarters too, by moving to a brand new facility in Biella (Italy).

Source:

Officina+39 / Menabò Group srl

Azgard 9’s innovative fabric absorbs carbon dioxide while simultaneously producing oxygen. (c) Azgard 9
23.07.2021

Monforts customers at Première Vision Digital Denim Week

Denim manufacturers employing Monforts technologies showcased their latest activities, including sustainable fabric manufacturing, new advances in fibres, dyes and chemicals, as well as process and supply improvements and recycling options, at Première Vision’s Digital Denim Week, held from July 5-9.

The users of Monforts equipment included AGI Denim (Pakistan), Azgard 9 (Pakistan), Berto (Italy), Bossa (Turkey), DNM (Turkey), Kilim (Turkey) and Orta (Turkey).

The new Naveena Denim Mills (Pakistan) Holistic collection, for example, employs a suite of sustainable materials such as organic cotton and post-consumer and post-industrial waste cotton that has been shredded and recycled at its in-house unit in Pakistan.

Supply chain transparency is also becoming increasingly important, and Turkey’s Bossa is now sharing information on its dyes, energy sources and recycled content use with its customers. For organic cotton in particular, Bossa provides QR codes with which brands can identify the names of individual farms and their locations, as well as details such as the origins of specific seeds and the use of irrigation by growers.

Denim manufacturers employing Monforts technologies showcased their latest activities, including sustainable fabric manufacturing, new advances in fibres, dyes and chemicals, as well as process and supply improvements and recycling options, at Première Vision’s Digital Denim Week, held from July 5-9.

The users of Monforts equipment included AGI Denim (Pakistan), Azgard 9 (Pakistan), Berto (Italy), Bossa (Turkey), DNM (Turkey), Kilim (Turkey) and Orta (Turkey).

The new Naveena Denim Mills (Pakistan) Holistic collection, for example, employs a suite of sustainable materials such as organic cotton and post-consumer and post-industrial waste cotton that has been shredded and recycled at its in-house unit in Pakistan.

Supply chain transparency is also becoming increasingly important, and Turkey’s Bossa is now sharing information on its dyes, energy sources and recycled content use with its customers. For organic cotton in particular, Bossa provides QR codes with which brands can identify the names of individual farms and their locations, as well as details such as the origins of specific seeds and the use of irrigation by growers.

Turkey’s Orta’s new Denim Route – inspired by the historical Silk Road for trade between the East and West – is an interactive supplier map detailing the regions from which it sources cotton, dyestuff, chemicals and various fibres to complement its other transparency initiatives.

Meanwhile, a living and breathing piece of clothing that absorbs carbon dioxide while simultaneously producing oxygen was introduced at Digital Denim Week 2021 by Azgard 9 (Pakistan) .

21.07.2021

Devan: Supporting elite sport with ‘cool comfort technology’ Moov&Cool.

Devan Chemicals has been supporting high performance sport in the UK and Belgium with its ‘cool comfort technology’ Moov&Cool.

Worldwide, hot temperatures are a new reality that brings extra challenges for athletes. Thermoregulation technology is becoming more and more important in order for athletes to perform at their best on the pinnacle of sports.

Working alongside the English Institute for Sport (EIS) and Sally Cowan Ltd, the technology is being applied to garments with the aim of improving the thermal comfort of elite athletes.

Moov&Cool consists of a multi-functional polymer technology that proposes to absorb heat during performance and improve the moisture management properties of the fabric. The treatment has been designed to simultaneously react to sweat build up and heat emission.

Devan Chemicals has been supporting high performance sport in the UK and Belgium with its ‘cool comfort technology’ Moov&Cool.

Worldwide, hot temperatures are a new reality that brings extra challenges for athletes. Thermoregulation technology is becoming more and more important in order for athletes to perform at their best on the pinnacle of sports.

Working alongside the English Institute for Sport (EIS) and Sally Cowan Ltd, the technology is being applied to garments with the aim of improving the thermal comfort of elite athletes.

Moov&Cool consists of a multi-functional polymer technology that proposes to absorb heat during performance and improve the moisture management properties of the fabric. The treatment has been designed to simultaneously react to sweat build up and heat emission.

In Belgium, Devan has been involved in the Gold2Gold project carried out by Sport Vlaanderen. Gold2Gold is a unique collaboration between sports, government and the industry to prepare Belgian athletes to perform better in hot environments during world-level championships. Thermoregulating technology is increasingly becoming a key aspect of endurance performance for elite athletes. At that top level, small differences in body core temperature can make the difference between being on the podium or sometimes not even finishing the race.

Source:

Devan Chemicals NV / Marketing Solutions NV

20.07.2021

DyStar’s Commitment to the Protection of its Global Intellectual Property Portfolio

DyStar, a specialty chemical company with a heritage of more than a century in product development and innovation, is pleased to announce their continued commitment to the protection of their global intellectual property portfolio.

As an innovative global chemical organisation, DyStar’s intellectual property portfolio is an important part of their DNA. To date, their innovation encompasses more than 1,000 patents, trademarks and patent applications worldwide.

Eric Hopmann, Chief Executive Officer of DyStar Group explains: “As DyStar continues to focus on managing challenges of the rapid global business recovery and exploring exciting growth opportunities across the emerging markets, our team needs to stay vigilant and vigorously protect our global intellectual property portfolio. This has again been demonstrated in a recent incident, where DyStar had to charge three former employees who had neglected to protect DyStar’s intellectual property, and were also under suspicion of having shared DyStar’s proprietary information with the competition.”

DyStar, a specialty chemical company with a heritage of more than a century in product development and innovation, is pleased to announce their continued commitment to the protection of their global intellectual property portfolio.

As an innovative global chemical organisation, DyStar’s intellectual property portfolio is an important part of their DNA. To date, their innovation encompasses more than 1,000 patents, trademarks and patent applications worldwide.

Eric Hopmann, Chief Executive Officer of DyStar Group explains: “As DyStar continues to focus on managing challenges of the rapid global business recovery and exploring exciting growth opportunities across the emerging markets, our team needs to stay vigilant and vigorously protect our global intellectual property portfolio. This has again been demonstrated in a recent incident, where DyStar had to charge three former employees who had neglected to protect DyStar’s intellectual property, and were also under suspicion of having shared DyStar’s proprietary information with the competition.”

Source:

DyStar Singapore Pte Ltd

08.07.2021

ECHA: Candidate List updated with eight hazardous chemicals

Some of the newly added substances are used in consumer products such as cosmetics, scented articles, rubber and textiles. Others are used as solvents, flame retardants or to manufacture plastics products. Most have been added to the Candidate List because they are hazardous to human health as they are toxic for reproduction, carcinogenic, respiratory sensitisers or endocrine disruptors.

Companies must follow their legal obligations and ensure the safe use of these chemicals. They also have to notify ECHA under the Waste Framework Directive if their products contain substances of very high concern. This notification is submitted to ECHA’s SCIP database and the information will later be published on the Agency’s website.

Some of the newly added substances are used in consumer products such as cosmetics, scented articles, rubber and textiles. Others are used as solvents, flame retardants or to manufacture plastics products. Most have been added to the Candidate List because they are hazardous to human health as they are toxic for reproduction, carcinogenic, respiratory sensitisers or endocrine disruptors.

Companies must follow their legal obligations and ensure the safe use of these chemicals. They also have to notify ECHA under the Waste Framework Directive if their products contain substances of very high concern. This notification is submitted to ECHA’s SCIP database and the information will later be published on the Agency’s website.

Background
The Candidate List includes substances of very high concern that may have serious effects on our health or the environment. These substances may be placed on the Authorisation List in the future, which means that companies would need to apply for permission to continue using them. The Candidate List has now 219 entries – some of these cover groups of chemicals so the overall number of impacted chemicals is higher.
 
Under the REACH Regulation, companies may have legal obligations when their substance is included – either on its own, in mixtures or in articles – in the Candidate List. Any supplier of articles containing a Candidate List substance above a concentration of 0.1 % weight by weight has to give sufficient information to their customers and consumers to allow safe use.
 
Importers and producers of articles containing a Candidate List substance have six months from the date of its inclusion in the list (8 July 2021) to notify ECHA. Suppliers of substances on the Candidate List (supplied either on their own or in mixtures) have to provide their customers with a safety data sheet.
 
As of 5 January 2021, suppliers of articles on the EU market containing Candidate List substances in a concentration above 0.1% weight by weight must notify these articles to ECHA’s SCIP database. This duty comes from the Waste Framework Directive.
 
More information on these obligations and related tools are available here.

Source:

European Chemicals Agency