From the Sector

Reset
166 results
24.03.2023

RadiciGroup: Zeta Polimeri becomes Radici EcoMaterials Srl

A little over three years have passed since RadiciGroup announced the acquisition of Zeta Polimeri, an Italian company headquartered in Buronzo (VC) with over 30 years' experience in the recovery of pre- and post-consumer synthetic fibres and thermoplastic materials. Today, the company has become a full member of the Group with its new name Radici EcoMaterials Srl.

The new company’s long-standing know-how, combined with RadiciGroup’s as a whole, will create a virtuous production system that recovers worn-out materials (fabric, yarn and granules), or otherwise unusable materials, and processes them into raw materials available for other production cycles by taking advantage of industrial synergy.

A little over three years have passed since RadiciGroup announced the acquisition of Zeta Polimeri, an Italian company headquartered in Buronzo (VC) with over 30 years' experience in the recovery of pre- and post-consumer synthetic fibres and thermoplastic materials. Today, the company has become a full member of the Group with its new name Radici EcoMaterials Srl.

The new company’s long-standing know-how, combined with RadiciGroup’s as a whole, will create a virtuous production system that recovers worn-out materials (fabric, yarn and granules), or otherwise unusable materials, and processes them into raw materials available for other production cycles by taking advantage of industrial synergy.

Radici EcoMaterials is a strategic production site because it handles all the preliminary recovery stages: the sorting, processing and pre-treatment of materials, including those used for the production of post-consumer yarns and engineering polymers. In this sense, Radici EcoMaterials is in line with the most recent European policies on sustainable textiles, which address minimizing the share of materials destined for disposal sites, favouring instead more structured recycling solutions.

Radici EcoMaterials is also GRS certified. GRS certification ensures the complete traceability of its materials, which are made in a safe plant that meets the highest environmental and social certification standards.

The company is also equipped with a photovoltaic system and, for the portion of its energy needs not covered by the photovoltaic source, it partially relies on renewable energy. The goal is to use 100% green energy in the next few years, in accord with RadiciGroup's goals.

Source:

RadiciGroup

15.03.2023

Indorama Ventures and Polymateria sign partnership for biodegradable hygiene products

Indorama Ventures Public Company Limited (IVL) and technology specialist Polymateria Limited have signed an exclusive 10-year partnership to help household brands bring biodegradable nonwoven hygiene products to the market through biotransformation technology.

This collaboration provides a new solution for dealing with essential items like facemasks and wipes once they have been used, ensuring they can return safely to nature without leaving behind any microplastics or toxic residue. It is specifically designed to tackle plastic leaking into the environment as unmanaged waste, meaning it is neither collected for landfill nor recycled. Given that most of the plastic in our oceans originates as unmanaged waste on land, addressing the unmanaged waste challenge is key.

Indorama Ventures Public Company Limited (IVL) and technology specialist Polymateria Limited have signed an exclusive 10-year partnership to help household brands bring biodegradable nonwoven hygiene products to the market through biotransformation technology.

This collaboration provides a new solution for dealing with essential items like facemasks and wipes once they have been used, ensuring they can return safely to nature without leaving behind any microplastics or toxic residue. It is specifically designed to tackle plastic leaking into the environment as unmanaged waste, meaning it is neither collected for landfill nor recycled. Given that most of the plastic in our oceans originates as unmanaged waste on land, addressing the unmanaged waste challenge is key.

IVL’s right to use Polymateria’s unique biotransformation technology for nonwovens supports application in non-virgin resin recycling while providing a solution for ‘fugitive’ used articles, especially those items that end up in the natural environment. This biotransformation process involves the plastic transforming into a bioavailable wax in the open terrestrial environment, whereupon the wax is fully consumed by bacteria, microbes and fungi, leaving just carbon dioxide, water, and biomass. The pulp component is inherently biodegradable under similar conditions.

Nonwovens made by IVL using Polymateria’s technology have been independently tested against, and meet the criteria in, the BSI PAS 9017 standard for the biodegradation of polyolefins in an open-air terrestrial environment published by the British Standards Institution in October 2020. This standard and/or its criteria – the first in the world to ensure plastic can biotransform in the open terrestrial environment without creating any microplastics – is being adopted around the world including in India, Malaysia, the Philippines and Hungary.

Source:

Indorama Ventures Public Company Limited

10.03.2023

Indorama Ventures: FY22 financial performance

Indorama Ventures Public Company Limited (IVL) reported a record FY22 financial performance from the company’s global manufacturing footprint serving end-consumers’ resilient need for daily necessities. The unusually high level of customer destocking that weighed on the fourth quarter result is expected to have leveled out and business should return to normal operating conditions, with China’s reopening to further spur demand.

Indorama Ventures Public Company Limited (IVL) reported a record FY22 financial performance from the company’s global manufacturing footprint serving end-consumers’ resilient need for daily necessities. The unusually high level of customer destocking that weighed on the fourth quarter result is expected to have leveled out and business should return to normal operating conditions, with China’s reopening to further spur demand.

Full-year Core EBITDA climbed 31% YoY to $2.3 billion as revenue rose 28% to a record $18.8 billion. The company recorded strong cash flows of $2.2 billion, up 111% YoY. Indorama Ventures’ geographically diversified, integrated platform, backed by management’s agility, withstood unprecedented global events to generate earnings through the business cycle. During the year, the company continued to focus on its growth plan, successfully integrating its strategic surfactants business in Latin America and Vietnamese packaging acquisition. A dedicated senior team is working tirelessly and is committed to the company’s ‘Vision 2030’ sustainability goals including recycling technologies and introducing biomass feedstock to the company’s product portfolio. The ongoing ‘Project Olympus’ cost transformation program delivered an annual run rate of $449 million in efficiencies.

The annual result was impacted by an unusually challenging final quarter as fears of a recession and reduced transit times led to widespread destocking by customers. 4Q22 Core EBITDA declined 43% YoY to $264 million on a 1% drop in revenue to $3.9 billion. The pandemic lockdown in China also continued into the final quarter, reducing factory demand across Indorama Ventures’ portfolio and resulting in narrower margins from lower prices and higher costs. Higher energy and utility costs impacted European operations as the war in Ukraine continued into the winter.

To improve competitiveness and build resilience, Indorama Ventures rationalized underperforming assets in the Fibers business in Europe and a PTA site in Asia, resulting in a $7 million cash impairment in 4Q22 and a $253 million non-cash impact. As a result, the company looks forward to a $38 million uplift in EBITDA in 2023, reaching up to $65 million by 2025.

Source:

Indorama Ventures Public Company Limited

02.03.2023

Recycling Atelier Augsburg and Kelheim Fibres cooperate

Kelheim Fibres, a leading manufacturer of viscose speciality fibres, has joined Recycling Atelier Augsburg. Recycling Atelier Augsburg is a unique centre for research and development in the field of textile recycling. It is located at the Institut für Textiltechnik Augsburg an affiliated institute of Augsburg University of Applied Sciences. The two institutions founded the Recycling Atelier in June 2022 together with twelve partners from the German textile industry.

In the Recycling Atelier, the focus is on the triad of technical and ecological sense as well as economic benefit. In this way, the partners of the Recycling Atelier are standing up against fast fashion, outsourced corporate responsibility and a general decline in raw material quality, which often fuels downcycling - the low-quality reuse - of materials.

Kelheim Fibres, a leading manufacturer of viscose speciality fibres, has joined Recycling Atelier Augsburg. Recycling Atelier Augsburg is a unique centre for research and development in the field of textile recycling. It is located at the Institut für Textiltechnik Augsburg an affiliated institute of Augsburg University of Applied Sciences. The two institutions founded the Recycling Atelier in June 2022 together with twelve partners from the German textile industry.

In the Recycling Atelier, the focus is on the triad of technical and ecological sense as well as economic benefit. In this way, the partners of the Recycling Atelier are standing up against fast fashion, outsourced corporate responsibility and a general decline in raw material quality, which often fuels downcycling - the low-quality reuse - of materials.

As a model factory, the Recycling Atelier Augsburg combines the most important processes of textile recycling and offers holistic and comprehensive research along the value chain," explains Georg Stegschuster, head of the Recycling Atelier Augsburg. The scientists research on all process steps of textile recycling: from material analysis to sorting, preparation and textile processing to sustainable product design. Comprehensive data collection and the use of artificial intelligence as well as innovative materials play a central role.

Kelheim Fibres is a producer of high-quality viscose fibres, which consist of cellulose, the main component of the renewable raw material wood, and are used worldwide for products in areas such as hygiene, textiles, and technical applications.

"In New Business Development as well as Fibre and Application Development, we follow the Open Innovation concept - the cooperation with the Recycling Atelier offers us an ideal platform for this. Here we work with partners to advance sustainability and performance," explains Maik Thiel, project manager at Kelheim Fibres.

Recycled cotton fibres are often very short or of uneven length, which makes further processing of 100 % recycled material a challenge. Adding speciality fibres from Kelheim Fibres should enable the production of high-quality new products, such as nonwovens. In the future, the fibres provided by Kelheim Fibres will also be made from recycled pulp.

Source:

Kelheim Fibres GmbH

Texaid
02.03.2023

New project “Transform Textile Waste into Feedstock”

Textile waste is a problem in Europe. Out of 7-7.5 million tonnes of textiles discarded every year, 30-35 % are collected separately – and of that quantity, 15-20 % are sorted by medium and larger sorting facilities within the EU. After sorting, 60 % still qualify as wearable clothes, however after a second or third collection-loop, all of the textiles become non-wearable sooner or later. Therefore, fibre-to-fibre recycling is becoming increasingly important to preserve the valuable resources.
 
The textile recycling value chain is not yet mature, but we are on the verge of a turning point, as different fibre-recycling technologies are deployed on a large scale. If successful, the textile recycling industry could reach a recycling rate of 18 to 26 percent of gross textile waste in 2030. This would create economic, social and environmental value that could total 3.5 to 4.5 billion euros in 2030.

Textile waste is a problem in Europe. Out of 7-7.5 million tonnes of textiles discarded every year, 30-35 % are collected separately – and of that quantity, 15-20 % are sorted by medium and larger sorting facilities within the EU. After sorting, 60 % still qualify as wearable clothes, however after a second or third collection-loop, all of the textiles become non-wearable sooner or later. Therefore, fibre-to-fibre recycling is becoming increasingly important to preserve the valuable resources.
 
The textile recycling value chain is not yet mature, but we are on the verge of a turning point, as different fibre-recycling technologies are deployed on a large scale. If successful, the textile recycling industry could reach a recycling rate of 18 to 26 percent of gross textile waste in 2030. This would create economic, social and environmental value that could total 3.5 to 4.5 billion euros in 2030.

Today, there is a sorting gap to achieve a circular economy for textiles in Europe. To feed this new circular value chain, a significant sorting-capacity increase is needed with 150 to 250 sorting and recycling facilities nearby, as the McKinsey-study “turning waste into value” assessed.

There is also a technology and capacity gap in sorting for reuse and recycling to ensure that high quality raw materials from non-wearable textile waste can be made available on a large scale. This is why the “Transform Textile Waste into Feedstock” project was initiated by TEXAID, within the ReHubs initiative together with well-known stakeholders of the textile value chain.

The major outcome of this project will be a sorting-factory blueprint fulfilling the requirements to the future needs of fibre-to-fibre recycling, enabling the future of more sustainable textiles by using recycled fibres. TEXAID, who is leading the project, is committed to build and operate scalable sorting facilities across Europe, the first with a capacity of 50,000 tonnes by the end of 2024.

Companies like Concordia, CuRe Technology, Decathlon, Inditex, Indorama Ventures, L’Atelier des Matières, Lenzing, Marchi & Fildi, PurFi, Södra, Worn Again and others are taking part in the project to jointly evaluate technologies and the business case for scaled sorting for reuse and recycling. ITA Academy GmbH (in cooperation with RWTH Aachen) together with CETIA has been commissioned for the assessment of technologies. The outcome will be an innovative sorting system 4.0, building on cross-functional technologies with digitalization and automation are at the heart.

(c) Euratex
RegioGreenTex - Kickoff meeting
21.02.2023

New European initiative for SMEs: Transform textile waste into value

43 partners of the RegioGreenTex project met in Brussels to kick start a three-year project that should change the way we manage textile recycling.

Regions for Green Textiles – known as RegioGreenTex – is a quadruple-helix partnership initiative aiming at mapping and reducing the difficulties, which currently exist in the implementation of a circular economy model within the textile ecosystem across the EU.

RegioGreenTex will  support tangible solutions at SME level, where textile waste becomes a value. The project will contribute to maintain and develop jobs in the EU textile sector, reshoring the production in Europe and making the EU textile value chain more competitive and resilient. It will contribute to the EU Green Deal objectives of reducing carbon footprint, energy and water consumption.

More information:
Euratex SMEs textile waste EISMEA
Source:

Euratex

17.02.2023

I:CO: Instore-Take-Back-System in Tally Weijl Filialen

I:CO baut seine Kooperation aus und sammelt zusammen mit dem Modeunternehmen Tally Weijl künftig in ganz Europa getragene Kleidung. Kunden können ab Anfang 2023 im Rahmen des Instore-Take-Back-Systems aussortierte Kleidung und Schuhe von jeder Brand in allen Tally Weijl Filialen nicht nur in der Schweiz, sondern auch in Frankreich abgeben. Im Laufe des Jahres 2023 sollen weitere Filialen in anderen EU-Ländern hinzukommen. Außerdem installierte Tally Weijl in ihrem Basler Hauptsitz ebenfalls I:CO-Boxen, um Textilreste und alte Muster zu sammeln. Gemeinsam wollen I:CO und Tally Weijl so gebrauchte Textilien durch umfangreiche Sortier- und Recyclingprozesse zu 100 Prozent im Produktkreislauf halten – und damit Ressourcen schonen und Abfall vermeiden.

Die gesammelten und sortierten Kleidungsstücke bekommen entweder als Secondhand Kleidung oder durch das Recycling ein zweites Leben, um somit wertvolle Ressourcen zu schonen. Gemeinsam mit seinen Partnern baut I:CO anhand des Take-Back-Systems nach und nach ein nahezu flächendeckendes Netz aus Sammelstellen auf, um  die Kreislaufwirtschaft in der Branche zu fördern.

I:CO baut seine Kooperation aus und sammelt zusammen mit dem Modeunternehmen Tally Weijl künftig in ganz Europa getragene Kleidung. Kunden können ab Anfang 2023 im Rahmen des Instore-Take-Back-Systems aussortierte Kleidung und Schuhe von jeder Brand in allen Tally Weijl Filialen nicht nur in der Schweiz, sondern auch in Frankreich abgeben. Im Laufe des Jahres 2023 sollen weitere Filialen in anderen EU-Ländern hinzukommen. Außerdem installierte Tally Weijl in ihrem Basler Hauptsitz ebenfalls I:CO-Boxen, um Textilreste und alte Muster zu sammeln. Gemeinsam wollen I:CO und Tally Weijl so gebrauchte Textilien durch umfangreiche Sortier- und Recyclingprozesse zu 100 Prozent im Produktkreislauf halten – und damit Ressourcen schonen und Abfall vermeiden.

Die gesammelten und sortierten Kleidungsstücke bekommen entweder als Secondhand Kleidung oder durch das Recycling ein zweites Leben, um somit wertvolle Ressourcen zu schonen. Gemeinsam mit seinen Partnern baut I:CO anhand des Take-Back-Systems nach und nach ein nahezu flächendeckendes Netz aus Sammelstellen auf, um  die Kreislaufwirtschaft in der Branche zu fördern.

Source:

SOEX

03.02.2023

Cellulose Fibres Conference 2023 publishes program

International experts will discuss topics along the entire cellulose fibre value chain at the upcoming Cellulose Fibres Conference, 8–9 March 2023 in Cologne and online.

How can the cellulose fibre industry contribute to the sustainability and circularity of the textile sector? How can fibre markets achieve a circular economy for their materials? What are the most sustainable technologies on the market? And, are there innovative, interesting raw materials and technologies worth exploring to meet the challenges of the coming years?

These and other questions in the field of cellulose fibres will be discussed within the program of the Cellulose Fibres Conference 2023. The two-day event will provide insights into the latest developments of the cellulose fibre sector and introduce innovative start-ups, technologies as well as novel fibre applications. A special focus will be set on the textile sector and its awaited paradigm shift towards circular economy in the following years.

Seven sessions will provide in depth views from fibre production to recycling, policy and market trends:

International experts will discuss topics along the entire cellulose fibre value chain at the upcoming Cellulose Fibres Conference, 8–9 March 2023 in Cologne and online.

How can the cellulose fibre industry contribute to the sustainability and circularity of the textile sector? How can fibre markets achieve a circular economy for their materials? What are the most sustainable technologies on the market? And, are there innovative, interesting raw materials and technologies worth exploring to meet the challenges of the coming years?

These and other questions in the field of cellulose fibres will be discussed within the program of the Cellulose Fibres Conference 2023. The two-day event will provide insights into the latest developments of the cellulose fibre sector and introduce innovative start-ups, technologies as well as novel fibre applications. A special focus will be set on the textile sector and its awaited paradigm shift towards circular economy in the following years.

Seven sessions will provide in depth views from fibre production to recycling, policy and market trends:

  • Strategies, Policy Framework of Textiles and Market Trends,
  • Circular Economy and Recyclability of Fibres,
  • Alternative Feedstocks and Supply Chains,
  • Innovation Award “Cellulose Fibre Innovation of the Year 2023″,
  • Sustainability and Environmental Impacts,
  • Ionic Liquids and New Technologies for Pulps, Fibres and Yarns,
  • New Technologies and Applications beyond Textiles.

The full conference program is available here.

Source:

nova-Institut für politische und ökologische Innovation GmbH

(c) nova-Institut GmbH
24.01.2023

Six nominees for„Cellulose Fibre Innovation of the Year 2023“

For the third time, nova-Institute awards the “Cellulose Fibre Innovation of the Year” award in the frame of the “Cellulose Fibres Conference 2023” (8-9 March 2023). The conference advisory board nominated six remarkable products, including cellulose fibres from textile waste, banana production waste and bacterial pulp, a novel technology for producing lyocell yarns and a hygiene product. The innovations will be put to the vote of the conference audience on the first day of the event, with the awards ceremony taking place in the evening. The innovation award “Cellulose Fibre Innovation of the Year 2023” is sponsored by GIG Karasek (AT).

For the third time, nova-Institute awards the “Cellulose Fibre Innovation of the Year” award in the frame of the “Cellulose Fibres Conference 2023” (8-9 March 2023). The conference advisory board nominated six remarkable products, including cellulose fibres from textile waste, banana production waste and bacterial pulp, a novel technology for producing lyocell yarns and a hygiene product. The innovations will be put to the vote of the conference audience on the first day of the event, with the awards ceremony taking place in the evening. The innovation award “Cellulose Fibre Innovation of the Year 2023” is sponsored by GIG Karasek (AT).

Here are the six nominees
Vybrana – The new generation banana fibre – GenCrest Bioproducts (India)

Vybrana is a Gencrest’s Sustainable Cellulosic Fibre upcycled from agrowaste. Raw fibres are extracted from the Banana Pseudo stem at the end of the plant lifecycle. The biomass waste is then treated by the Gencrest patented Fiberzyme technology. Here, cocktail enzyme formulations remove the high lignin content and other impurities and help fibre fibrillation. The company's proprietary cottonisation process provides fine, spinnable cellulose staple fibres suitable for blending with other staple fibres and can be spun on any conventional spinning systems giving yarns sustainable apparel. Vybrana is produced without the use of heavy chemicals and minimized water consumption and in a waste-free process where balance biomass is converted to bio stimulants Agrosatva and Bio Fertilizers & organic manure.

HeiQ AeoniQ™ – technology for more sustainability of textiles – HeiQ (Austria)
HeiQ AeoniQ™ is the disruptive technology and key initiative from HeiQ with the potential to change the sustainability of textiles. It is the first climate-positive continuous cellulose filament yarn, made in a proprietary manufacturing process and the first to reproduce the properties of polyester and nylon yarns in a cellulosic, biodegradable, and endlessly recyclable fibre.
HeiQ AeoniQ™ can be manufactured from different cellulosic raw materials such as pre- and post-consumer textile waste, biotech cellulose, and non-valorized agricultural waste, such as ground coffee waste or banana peels. It naturally degrades after only 12 weeks in the soil. Each ton of HeiQ AeoniQ™ saves 5 tons of CO2 emissions. The first garments made with this innovative cellulosic filament fiber were commercially launched in January 2023.

TENCEL™ LUXE – lyocell filament yarn – Lenzing (Austria)
TENCEL™ LUXE is LENZING’s new versatile lyocell yarn that offers an urgently needed sustainable filament solution for the textile and fashion industry. A possible botanical alternative for silk, long-staple cotton, and petrol-based synthetic filaments, is derived from wood grown in renewable, sustainably managed forests, and produced in an environmentally sound, closed-loop process that recycles water and reuses more than 99 % of organic solvent. Certified by The Vegan Society, it is suitable for a wide range of applications and fabric developments, from finer high fashion propositions to denim constructions, seamless and activewear innovations, and even agricultural and technical solutions.

Nullarbor™ – Nanollose & Birla Cellulose (Australia/India)
In 2020, Nanollose & Birla Cellulose started a journey to develop and commercialize tree-free lyocell from bacterial cellulose, called Nullarbor™. The name derives from the Latin “nulla arbor” which means “no trees”. Initial lab research at both ends led to a joint patent application with the patent “production of high-tenacity lyocell fibres made from bacterial cellulose”.
Nullarbor is significantly stronger than lyocell made from wood-based pulp; even adding small amounts of bacterial cellulose to wood pulp increases the fibre toughness. In 2022, the first pilot batch of 260kg was produced with 20 % bacterial pulp share. Several high-quality fabrics and garments were produced with this fibre. The collaboration between Nanollose & Birla Cellulose now focuses on increasing the production scale and amount of bacterial pulp in the fibre.

Circulose® – makes fashion circular – Renewcell (Sweden)
Circulose® made by Renewcell is a branded dissolving pulp made from 100 % textile waste, like worn-out clothes and production scraps. It provides a unique material for fashion that is 100 % recycled, recyclable, biodegradable, and of virgin-equivalent quality. It is used by fibre producers to make staple fibre or filaments like viscose, lyocell, modal, acetate or other types of man-made cellulosic fibres. In 2022, Renewcell, opened the world’s first textile-to-textile chemical recycling plant in Sundsvall, Sweden – Renewcell 1. The plant will eventually reach 120,000 tons of annual capacity.

Sparkle sustainable sanitary pads – Sparkle Innovations (United States)
Globally, around 300 billion period products are discarded every year, resulting in millions of tons of non-biodegradable waste. Since most conventional sanitary pads contain up to 90 % plastics, they do not biodegrade for around 600 years. Sparkle has designed sustainable, plastic-free, biodegradable and compostable Sparkle sanitary pads. From product to packaging, they are made up of around 90 % cellulose-based materials with top sheet, absorbent core, release paper, wrapping paper and packaging made of cellulose-based fibres. Whether Sparkle pads end up in a compost pit, are incinerated or end up in a landfill, they are a more sustainable alternative compared to conventional pads that contain large amounts of plastics, complex petro-chemical based ingredients and artificial fragrances. When tested according to ISO 14855-1 by a leading independent lab in Europe, Sparkle pads reached over 90 % absolute biodegradation within 90 days in commercial composting conditions.

Grafik: econAN international GmbH
11.01.2023

Geförderte Geschäftsanbahnungsreise nach Finnland: Textilrecycling und neue textile Fasern

Die AHK Finnland führt in Kooperation mit der econAN international GmbH, dem bvse-Fachverband Textilrecycling e.V. und German RETech Partnership e.V. im Auftrag des Bundesministeriums für Wirtschaft und Klimaschutz, eine Geschäftsanbahnungsreise nach Finnland durch. Es handelt sich dabei um eine projektbezogene Fördermaßnahme. Sie ist Bestandteil der Exportinitiative Umwelttechnologien und wird im Rahmen des Markterschließungsprogramms für KMU durchgeführt. Zielgruppe sind vorwiegend kleine und mittlere deutsche Unternehmen (KMU).

Die AHK Finnland führt in Kooperation mit der econAN international GmbH, dem bvse-Fachverband Textilrecycling e.V. und German RETech Partnership e.V. im Auftrag des Bundesministeriums für Wirtschaft und Klimaschutz, eine Geschäftsanbahnungsreise nach Finnland durch. Es handelt sich dabei um eine projektbezogene Fördermaßnahme. Sie ist Bestandteil der Exportinitiative Umwelttechnologien und wird im Rahmen des Markterschließungsprogramms für KMU durchgeführt. Zielgruppe sind vorwiegend kleine und mittlere deutsche Unternehmen (KMU).

Für die Projektteilnehmer*innen werden individuell auf ihre Anforderungen zugeschnittene Geschäftsgespräche mit potenziellen Kooperationspartnern, Kunden und Branchenexperten organisiert. In Vorbereitung auf die Geschäftsanbahnungsreise erhalten sie eine Zielmarktanalyse, die auf die relevante Branche, deren Marktentwicklung, Vertriebsinformationen sowie die rechtlichen und steuerlichen Rahmenbedingungen auf dem finnischen Markt eingeht. Im Rahmen einer fachbezogenen Präsentationsveranstaltung werden die deutschen Teilnehmer*innen die Möglichkeit haben, dem finnischen Fachpublikum bestehend aus Vertreter*innen der Wirtschaft, Verbänden, Verwaltung und Presse ihre Leistungen, Produkte und Technologien vorzustellen.

Für etablierte Unternehmen und Start-ups aus den Bereichen Textilrecycling und neue Textilfasern bieten sich viele Geschäfts- und Kooperationsmöglichkeiten auf dem finnischen Markt. Ebenfalls ist der finnische Markt interessant für deutsche Unternehmen, die Textilien in ihren Produkten nutzen und diese nachhaltiger gestalten möchten. Nachgefragt sind u.a. Lösungen für eine effiziente Sortierung von Textilien und für die Identifizierung von Textilarten, Innovationen für die Verwendung von recycelten Fasern, Recyclingtechniken sowie Maschinenhersteller. Deutsche Unternehmen dürfen mit einem großen Interesse an Kooperationen rechnen, denn die finnische Textilindustrie benötigt Partner in allen Phasen der Wertschöpfungskette.

Zielgruppe: Unternehmen aus den Bereichen Textilrecycling sowie neue textile Fasern. Die gesamte Wertschöpfungskette ist angesprochen – von Zulieferern von Maschinen und Rohstoffen bis zu Anbieter von Produkten aus recyceltem Material.

Inhalt: Die TeilnehmerInnen erhalten Unterstützung bei Markteintritt bzw. -bearbeitung in Finnland:

  • Während einer Fachkonferenz präsentieren sie ihre Produkte und Dienstleistungen dem regionalen Fachpublikum (aus Wirtschaft, Politik und Verbänden).
  • Zur Vorbereitung erhalten sie eine branchenspezifische Zielmarktanalyse mit Informationen zu den Marktpotenzialen und -entwicklungen, rechtlichen Rahmenbedingungen etc.
  • Das Herzstück des Programms sind individuelle Termine mit Entscheidungsträgern und potenziellen Geschäftspartnern. Diese werden im Vorfeld für jedes Unternehmen durch eine individuelle Geschäftspartnersuche ermittelt.

Der Teilnahmebetrag liegt je nach Firmengröße zwischen 500€ und 1.000€ netto. Es können maximal 12 Unternehmen teilnehmen.

Weitere Informationen und zum Anmeldeformular online unter: https://www.econan.com/textilrecycling-und-neue-textile-fasern-in-finnland/  

Source:

econAN international GmbH

(c) TEXAID
21.12.2022

TEXAID introduces recycled tote bag with a digital product passport

With the aim of increasing the use of post-consumer fibers in textiles, TEXAID launches a white tote bag. The fabric is a mixture of 50% used textile waste collected by TEXAID in Switzerland and Germany. At TEXAID's largest sorting facility in Apolda, Germany, white cotton textiles that can no longer be worn were sorted out and later spun, woven, and manufactured in Italy. Plastic waste makes up the other 50%. Unifi rescued this ocean-bound plastic waste and recycled it into fiber.

The cotton material was transformed into a fiber by Marchi & Fildi in Biella, IT, which was then spun into a yarn using recycled cotton and recycled polyester fibers. This yarn was woven into textile by Tessitura Casoni.T.F.C.. The care label and flag label were produced by the German company Bornemann-Etiketten GmbH, and an NFC chip from circular.fashion was also integrated into the product. All components were then assembled into this bag in Tuscany by benefit company Alisea Srl Società Benefit with their partner Paimex SRL and also screen printed with our design on it.

With the aim of increasing the use of post-consumer fibers in textiles, TEXAID launches a white tote bag. The fabric is a mixture of 50% used textile waste collected by TEXAID in Switzerland and Germany. At TEXAID's largest sorting facility in Apolda, Germany, white cotton textiles that can no longer be worn were sorted out and later spun, woven, and manufactured in Italy. Plastic waste makes up the other 50%. Unifi rescued this ocean-bound plastic waste and recycled it into fiber.

The cotton material was transformed into a fiber by Marchi & Fildi in Biella, IT, which was then spun into a yarn using recycled cotton and recycled polyester fibers. This yarn was woven into textile by Tessitura Casoni.T.F.C.. The care label and flag label were produced by the German company Bornemann-Etiketten GmbH, and an NFC chip from circular.fashion was also integrated into the product. All components were then assembled into this bag in Tuscany by benefit company Alisea Srl Società Benefit with their partner Paimex SRL and also screen printed with our design on it.

This NFC chip is a circularity.IDⓇ digital product passport, developed by the Berlin-based company, circular.fashion. By scanning the NFC chip on the bag with a cell phone, customers are redirected to the circularity.IDⓇ product platform. On this platform, they can find further information on the supply chain as well as instructions on how to refurbish or return the bag for proper recycling. Through this digital product passport, a total transparency over the entire bag production is enabled and for customers it is an easy and quick way to get the information they need.

The chip also allows the manual sorters to getthe product information much faster to make a better sorting decision, e.g. the fiber composition. For this purpose, circular.fashion's intelligent sorting stations are used to scan the chip. Several of these stations have been installed at TEXAID's sorting facility in Apolda, Germany, to facilitate optimized reuse and recycling decisions and ensure another life for the product or fiber.

Source:

TEXAID

20.12.2022

Mey and Hologenix® launch first menswear collection with Celliant® Viscose

Mey GmbH & Co. KG, a global manufacturer of underwear, nightwear and lingerie based in Germany, is launching the world’s first men’s nightwear with CELLIANT® Viscose, which converts body heat into infrared energy.

Called mey Zzzleepwear - THE NEW SLEEP-LIFE BALANCE, the collection follows the successful debut of the similarly named women’s collection in 2021. It consists of four designs in Indigo available in T-shirts, short pants, long-sleeved shirts and long pants. CELLIANT works by recycling the heat emitted by the body into full-spectrum infrared energy and then returns it to the body. As a result, it increases the supply of oxygen to the cells and promotes a restful sleep.

Mey GmbH & Co. KG, a global manufacturer of underwear, nightwear and lingerie based in Germany, is launching the world’s first men’s nightwear with CELLIANT® Viscose, which converts body heat into infrared energy.

Called mey Zzzleepwear - THE NEW SLEEP-LIFE BALANCE, the collection follows the successful debut of the similarly named women’s collection in 2021. It consists of four designs in Indigo available in T-shirts, short pants, long-sleeved shirts and long pants. CELLIANT works by recycling the heat emitted by the body into full-spectrum infrared energy and then returns it to the body. As a result, it increases the supply of oxygen to the cells and promotes a restful sleep.

CELLIANT Viscose was developed by Hologenix®, creators of CELLIANT, a textile-based infrared ingredient brand, and Kelheim Fibres, a leading manufacturer of viscose specialty fibers. CELLIANT Viscose features natural minerals embedded into plant-based fibers and is biodegradable. It provides all the benefits of being a viscose fiber — lightweight, soft, highly breathable, excellent moisture management — as well as the fiber enhancements from CELLIANT infrared technology. In addition, CELLIANT is durable and will not wash out.

Source:

Hologenix, LLC,

(c) FET
Business Secretary Grant Shapps discusses FET’s wet spinning system with Mark Smith, FET R&D Manager
16.12.2022

FET extrusion system features in UK Business Secretary’s visit

The UK’s new Business Secretary, Grant Shapps has visited the Henry Royce Institute’ hub in Manchester to seal the second phase of R&D investment in the institute of £95 million. Fibre Extrusion Technology Limited (FET) of Leeds, England had previously installed its FET-200LAB wet spinning system at the University of Manchester site and this proved to be a focus for the Business Secretary’s interest, as he discussed the project with FET’s Research and Development Manager, Mark Smith.

This wet spinning technology enables fibres to be derived from sustainable wood pulp to produce high quality apparel and trials are now underway to perfect this process. FET is a world leading supplier of laboratory and pilot melt spinning systems, having successfully processed more than 35 different polymer types in multifilament, monofilament and nonwoven formats.

During his visit, Shapps spoke of the investment programme as a means of reinforcing the UK’s standing as a leader in advanced materials research, development and innovation.

The UK’s new Business Secretary, Grant Shapps has visited the Henry Royce Institute’ hub in Manchester to seal the second phase of R&D investment in the institute of £95 million. Fibre Extrusion Technology Limited (FET) of Leeds, England had previously installed its FET-200LAB wet spinning system at the University of Manchester site and this proved to be a focus for the Business Secretary’s interest, as he discussed the project with FET’s Research and Development Manager, Mark Smith.

This wet spinning technology enables fibres to be derived from sustainable wood pulp to produce high quality apparel and trials are now underway to perfect this process. FET is a world leading supplier of laboratory and pilot melt spinning systems, having successfully processed more than 35 different polymer types in multifilament, monofilament and nonwoven formats.

During his visit, Shapps spoke of the investment programme as a means of reinforcing the UK’s standing as a leader in advanced materials research, development and innovation.

“R&D investment is a critical way to turbocharge Britain’s growth. Growing an economy fit for the future means harnessing the full potential of advanced materials, making science fiction a reality by supporting projects from regenerative medicine to robots developing new recycling capabilities, right across the country. Today’s £95 million investment will do just that, bringing together the brightest minds across our businesses and institutions to help future-proof sectors from healthcare to nuclear energy.”

The Henry Royce Institute was established in 2015 with an initial £235 million government investment through the Engineering and Physical Sciences Research Council and the latest £95 million sum represents the second phase of the investment.

Opportunities being investigated by Royce include lightweight materials and structures, biomaterials and materials designed for reuse, recycling and remanufacture. Advanced materials are critical to the UK future in various industries, such as health, transport, energy, electronics and utilities.

(c) Hologenix, LLC
18.11.2022

Hologenix® celebrates 20-year anniversary

Hologenix®, creators of CELLIANT®, began 20 years ago with the idea of improving the quality of people's lives and health with an emphasis on non-invasive, natural, holistic healing. Co-founder and CEO Seth Casden became fascinated with the effect infrared has on the body and worked with a dedicated team to develop and market CELLIANT® infrared technology and thus materials science innovator Hologenix came to be.

CELLIANT, a proprietary blend of IR-generating bioceramics that are ethically sourced, is a unique combination of nature and performance. CELLIANT captures and converts body heat into infrared energy for increased local circulation and cellular oxygenation, resulting in stronger performance, faster recovery and better sleep. It is a key ingredient in textiles, spanning both performance and fashion apparel, sleep and lounge wear, bedding, upholstery, uniforms and medical supplies.

Hologenix®, creators of CELLIANT®, began 20 years ago with the idea of improving the quality of people's lives and health with an emphasis on non-invasive, natural, holistic healing. Co-founder and CEO Seth Casden became fascinated with the effect infrared has on the body and worked with a dedicated team to develop and market CELLIANT® infrared technology and thus materials science innovator Hologenix came to be.

CELLIANT, a proprietary blend of IR-generating bioceramics that are ethically sourced, is a unique combination of nature and performance. CELLIANT captures and converts body heat into infrared energy for increased local circulation and cellular oxygenation, resulting in stronger performance, faster recovery and better sleep. It is a key ingredient in textiles, spanning both performance and fashion apparel, sleep and lounge wear, bedding, upholstery, uniforms and medical supplies.

The first partnership Hologenix secured was with the Ireland-based fiber company Wellman International Limited, a fully owned subsidiary of Indorama Ventures and a pioneer in recycling technologies. Hologenix still works with them today, a tribute to the company’s ability to form long-term partnerships with like-minded organizations, and their joint project of pure white CELLIANT rPET fiber was shortlisted for a prestigious Drapers Sustainable Fashion Award earlier in the year.

On the brand side, many of the first brands to incorporate CELLIANT were in the sportwear industry, including Adidas, Reebok, Saucony, Eastern Mountain Sports, Sierra Designs sleeping bags and Superfeet insoles.

In 20 years, Hologenix has achieved many scientific milestones, and CELLIANT has been and continues to be rigorously tested by a Science Advisory Board composed of experts in photobiology, nanotechnology, sleep medicine, and diabetes and wound care. The Science Advisory Board has overseen nine peer-reviewed published studies that demonstrate CELLIANT’s effectiveness and the benefits of infrared energy.

Looking ahead, Hologenix is continuing to research applications for CELLIANT in the agriculture industry and wound healing and diabetes. Expansion into the FemTech market with both product applications and scientific research about the benefits of infrared for women’s health issues is also on the horizon.

Source:

Hologenix, LLC / Sarah P. Fletcher Communications

(c) Robin Inizan – Lucas Pavy Production
Tearing line by ANDRITZ in operation at the Renaissance Textile plant
11.11.2022

Renaissance Textile starts up the first textile recycling line by ANDRITZ in France

Renaissance Textile in Laval, France has successfully started up a complete textile recycling line, delivered, installed, and commissioned by ANDRITZ Laroche, part of the international technology group ANDRITZ.

The ANDRITZ textile recycling equipment enabled Renaissance Textile to become the first French recycling platform dedicated to industrial end-of-life textiles. The project aims to produce new fibers from the collected post-consumer apparel, which will be used to weave new recycled fabrics in the end.

The new 12,000 m² plant is equipped with a complete tearing line whose design is the result of close collaboration between R&D specialists from ANDRITZ Laroche and Renaissance Textile, as well as customized trials carried out jointly by the two parties at the ANDRITZ technical center in Cours, France.

Renaissance Textile in Laval, France has successfully started up a complete textile recycling line, delivered, installed, and commissioned by ANDRITZ Laroche, part of the international technology group ANDRITZ.

The ANDRITZ textile recycling equipment enabled Renaissance Textile to become the first French recycling platform dedicated to industrial end-of-life textiles. The project aims to produce new fibers from the collected post-consumer apparel, which will be used to weave new recycled fabrics in the end.

The new 12,000 m² plant is equipped with a complete tearing line whose design is the result of close collaboration between R&D specialists from ANDRITZ Laroche and Renaissance Textile, as well as customized trials carried out jointly by the two parties at the ANDRITZ technical center in Cours, France.

The new clothing produced based on this type of circular economy model thus reflects the social and sustainability commitments of Renaissance Textile in terms of decarbonizing the textile industry, the fight against global warming, autonomy in raw material sourcing, and promotion of local staffing, particularly for people who have been unemployed for a long time or are seeking to enter the labor market for the first time. By 2025, for example, Renaissance Textile plans to create no less than 110 direct jobs.

07.11.2022

CIBUTEX begrüßt MEWA als ein neues Mitglied

Die MEWA Textil-Service AG & Co. Management OHG hat sich der Genossenschaft CIBUTEX als Mitglied angeschlossen. MEWA ein Vorreiter in Sachen Nachhaltigkeit in der Textilservice-Branche.

Verantwortung und Umwelt sind zwei der Mewa-Grundwerte, die sie mit der Mitgliedschaft bei CIBUTEX und dem Recycling ihrer B2B-Alttextilien weiter in die Tat umsetzen möchten. „Unser Ziel ist es, Alttextilien im Stoffkreislauf zu halten – ein geeignetes und skalierbares Recyclingverfahren zu identifizieren, was auch mit Blick auf den Energieaufwand sinnvoll ist, ist eine echte Herausforderung“, sagt Nicole Kiefer, Trendscout Future Textile bei Mewa.

„Wir freuen uns sehr, Mewa als ein neues Mitglied unserer Genossenschaft begrüßen zu dürfen“, sagt Ralf Hellmann, CIBUTEX-Ansprechpartner der D-A-CH-Region. „Gemeinsam mit MEWA werden wir uns mit der Erarbeitung zukunftsfähiger Recyclinglösungen für Berufsbekleidung beschäftigen.“

Die MEWA Textil-Service AG & Co. Management OHG hat sich der Genossenschaft CIBUTEX als Mitglied angeschlossen. MEWA ein Vorreiter in Sachen Nachhaltigkeit in der Textilservice-Branche.

Verantwortung und Umwelt sind zwei der Mewa-Grundwerte, die sie mit der Mitgliedschaft bei CIBUTEX und dem Recycling ihrer B2B-Alttextilien weiter in die Tat umsetzen möchten. „Unser Ziel ist es, Alttextilien im Stoffkreislauf zu halten – ein geeignetes und skalierbares Recyclingverfahren zu identifizieren, was auch mit Blick auf den Energieaufwand sinnvoll ist, ist eine echte Herausforderung“, sagt Nicole Kiefer, Trendscout Future Textile bei Mewa.

„Wir freuen uns sehr, Mewa als ein neues Mitglied unserer Genossenschaft begrüßen zu dürfen“, sagt Ralf Hellmann, CIBUTEX-Ansprechpartner der D-A-CH-Region. „Gemeinsam mit MEWA werden wir uns mit der Erarbeitung zukunftsfähiger Recyclinglösungen für Berufsbekleidung beschäftigen.“

Source:

Dibella GmbH / CIBUTEX

Photo: Euratex
26.10.2022

EURATEX & ATP Convention successfully concluded in Porto

  • European textile industry needs to prepare for a paradigm shift, and become global leader in sustainable textiles

Organised by EURATEX in partnership with the Portuguese Textile Association (ATP), the Porto Convention – Sustainability meets Competitiveness: How to Square the Circle? – took place on 13-14 October in Porto, Portugal, with nearly 250 entrepreneurs attending from all over Europe. They discussed the current challenges of the European textile industry and set the grounds for a bright future, based on some strong foundations: innovation, creativity, quality and sustainability.

In his keynote speech, Mr. Pedro Siza Vieira, Former Minister for the Economy and Digital Transition of Portugal, assessed the geopolitical and macroeconomics changes, and how this will impact on the future of the textile industry: nearshoring and friend-shoring, independence from foreign gas through the use of European sustainable energy, as well as circular and automated production lines. While the current turbulence causes uncertainty, he sees a better future for our industry.

  • European textile industry needs to prepare for a paradigm shift, and become global leader in sustainable textiles

Organised by EURATEX in partnership with the Portuguese Textile Association (ATP), the Porto Convention – Sustainability meets Competitiveness: How to Square the Circle? – took place on 13-14 October in Porto, Portugal, with nearly 250 entrepreneurs attending from all over Europe. They discussed the current challenges of the European textile industry and set the grounds for a bright future, based on some strong foundations: innovation, creativity, quality and sustainability.

In his keynote speech, Mr. Pedro Siza Vieira, Former Minister for the Economy and Digital Transition of Portugal, assessed the geopolitical and macroeconomics changes, and how this will impact on the future of the textile industry: nearshoring and friend-shoring, independence from foreign gas through the use of European sustainable energy, as well as circular and automated production lines. While the current turbulence causes uncertainty, he sees a better future for our industry.

The first CEO Panel, addressing the theme of How to Measure and Communicate about Sustainability, focused on the challenges to translate “sustainability” towards the consumers. The panel addressed the issue of greenwashing and the role of brands in communicating about sustainability. It looked at how the new European Commission regulations on eco-label, digital product passport (DPP) and product environmental footprint (PEF) will create a new framework.

The second CEO Panel, discussing Financing Sustainability, looked at the cost of sustainable investments, and how this cost should be managed within the entire supply chain, including the brands and retailers.

Four workshops with industry experts followed in the afternoon, addressing the themes of Extended Producer Responsibility (EPR) in Textiles, Digital Product Passport (DPP), Recycling Textile Waste and Labelling Textiles (Product Environmental Footprint). As these initiatives will roll out in the coming years – as part of the EU Textile Strategy – participants got a better understanding of the future framework for our industry.

Dirk Vantyghem, Director General of EURATEX, commented on this: “to prepare for a brighter future requires a new regulatory framework, where quality and durability become the norm, where transparency and sustainability is rewarded, where free riders – who do not comply with rules and standards – are kept outside the market. The EU Textile Strategy aims at creating such a framework, which must be fair and balanced, and requires a close and constant dialogue between the regulator and the industry.”

During the 2nd day of the convention, participants had the opportunity to visit state of the art textile companies (Têxteis J.F. Almeida, RIOPELE, and TMG Automotive) and the Portuguese textile  research centre CITEVE. They showcased how the Portuguese textile industry is making this transition, while remaining globally competitive.

Alberto Paccanelli, President of EURATEX, concluded: “We need to attract creative people in our companies, we need to produce top class quality products, and we need to become more sustainable. That is the recipe for our success in a globalised and highly competitive industry.” Paccanelli is positive about the future: “While we face very tough times, I am optimistic about the future of our European textile industry. The rest of the world is watching us, as we move forward with our strategy. We should become their benchmark and Europe should become a global leader in sustainable textiles.”

 

Source:

Euratex

Photo: EREMA
21.10.2022

EREMA: Circular economy for PET fibres

The textile industry is the third largest consumer of plastics. While growth rates in the production of fibres and textiles are high, the circular economy has hardly become established in this segment. The EREMA Group is now intensifying development of recycling solutions for this application with their new fibres and textiles business unit. Currently, the focus is on PET fibre materials from fibre production and subsequent processing steps. Technologies for recycling mixed fibre textiles from textile collection sources are to follow in a follow-up project phase.

The textile industry is the third largest consumer of plastics. While growth rates in the production of fibres and textiles are high, the circular economy has hardly become established in this segment. The EREMA Group is now intensifying development of recycling solutions for this application with their new fibres and textiles business unit. Currently, the focus is on PET fibre materials from fibre production and subsequent processing steps. Technologies for recycling mixed fibre textiles from textile collection sources are to follow in a follow-up project phase.

"With EREMA's VACUREMA® and INTAREMA® technology and PURE LOOP's ISEC evo technology, our company group already has an extensive range of machines for fibre and PET recycling applications. For ecologically and economically sound recycling, however, new technological solutions are needed to use the recycled fibres in higher-value end applications and to achieve a functioning circular economy," explains Wolfgang Hermann, Business Development Manager Application Fibres & Textiles, EREMA Group GmbH. The initial focus will be on PET, regarded as a key material for the production of synthetic fibres. The aim is to find recycling solutions that allow PET fibre materials to be prepared for reuse in PET fibre production processes. This is a significant step for the circular economy because PET fibres in textiles account for about two-thirds of the total volume of PET.

In this development work, the EREMA Group can build on existing know-how. Proven recycling technologies have been combined with a new IV optimiser. "This extends the residence time of the PET melt, which is particularly necessary in fibre recycling to efficiently remove spinning oils. Our recycling process also increases the IV value of the PET melt after extrusion back to the specific level that is essential for production of the fibre," explains Hermann. Waste PET fibre from production processes can therefore be further processed into rPET filament fibre, carpet yarn and staple fibre.

Fibre test centre with plant to test customers' materials
In order to accelerate development work, EREMA opened its own fibre test centre a few months ago, where a cross-company team is working on recycling solutions for fibre-to-fibre applications.

Source:

EREMA Gruppe

(c) Carbios
20.10.2022

Carbios publishes results of consumer research study about plastic circularity

  • Carbios’ biorecycling and biodegradation technologies internationally recognized by consumers as promising answers to their top environmental concerns
  • Carbios’ innovations considered one of the best for solving recycling effectively and achieving a real plastic circularity
  • Consumer research including qualitative and quantitative fields was conducted between March and August 2022. The research institute, Strategic Research, conducted 6000 interviews in Europe and USA

Carbios’ biorecycling and biodegradation technologies acclaimed by consumers
During the first research field study, respondents were exposed to Carbios’ biorecycling process; a new enzyme-based biotechnology that enables biological recycling of all types of PET plastic waste (including bottles, packaging and textiles), and pushes the boundaries of recycling in terms of the number of cycles.

  • Carbios’ biorecycling and biodegradation technologies internationally recognized by consumers as promising answers to their top environmental concerns
  • Carbios’ innovations considered one of the best for solving recycling effectively and achieving a real plastic circularity
  • Consumer research including qualitative and quantitative fields was conducted between March and August 2022. The research institute, Strategic Research, conducted 6000 interviews in Europe and USA

Carbios’ biorecycling and biodegradation technologies acclaimed by consumers
During the first research field study, respondents were exposed to Carbios’ biorecycling process; a new enzyme-based biotechnology that enables biological recycling of all types of PET plastic waste (including bottles, packaging and textiles), and pushes the boundaries of recycling in terms of the number of cycles.

The research results demonstrated that European and US respondents find Carbios’ biorecycling technology more unique and innovative than traditional PET recycling (i.e. thermo-mechanical recycling), as well as more relevant in its ability to address their concerns and challenges regarding recycling.

In the second research study, conducted in the US, respondents were also exposed to Carbios’ biodegradation technology: an innovative enzymatic solution by which an enzyme is incorporated into plastics during the production process of bio-sourced PLA plastics (corn, sugar cane). This approach makes the material made from plants 100% compostable at ambient temperatures and degradable like plants with the built-in enzyme biologically breaking the bioplastic down in less than eight weeks without microplastics or toxic residues; creating a fully organic circularity.

Similarly to Carbios’ biorecycling technology, Carbios’ PLA biodegradation innovation caught US respondents’ attention with 64% overall liking it. Additionally, 93% of the respondents sampled described the concept as innovative, unique, easy to understand (49%), and believable (43%). Up to 82% of the most environmentally engaged respondents declared they would definitely buy more products made with Carbios’ fully circular biodegradable bioplastic.

Consumers: No other choice but to make plastic fully circular
The research says 99% of the respondents consider it important to protect the environment, while plastic pollution is now ranked the third most-concerning environmental issues after climate change and ocean pollution.

This awareness brings most of these consumers to be environmentally active when it comes to purchasing goods and sorting. For the US respondents, eco-friendly packaging comes in the fourth place in terms of purchase drivers for packaged goods and 65% of them declare sorting plastic from general waste on a regular basis, which makes plastic the most sorted type of waste.

Nevertheless, for a vast majority of the respondents across geographies, even if they would like to reduce their plastic consumption most of the time there is no suitable alternative that is as convenient, light, and cost-efficient as plastics. Hence in an ideal world, consumers would like all plastic waste in landfills and oceans to be collected, cleaned, reused and recycled.

More information:
Carbios study circularity plastics
Source:

Carbios

(c) JEC Group
13.10.2022

JEC Forum DACH reveals the Startup Booster Finalists

JEC Forum DACH‘s primary goal is to promote the DACH region’s dynamic composites ecosystem. Besides an extensive program of business meetings and conferences, innovation will have a special place in Augsburg from November 29 to 30, 2022 as attendees will have the opportunity to witness the JEC Composites Startup Booster and the AVK Awards. Winners of both competitions will be announced during a dedicated ceremony on November 29th.

The five finalists are:

BioWerkz: Closing the Loops
At BioWerkz a new bio-based, resource-efficient, and CO2-negative material called “NEWood” is developed,  using only wood waste and agricultural waste bound using fungal mycelium; the root network of mushrooms as a natural binder without the need for any synthetic binders.

Bufo Technology – HARDCORK: High-Performance Biobased Composite – Superior by nature
Bufo Technology has developed the high-performance composite material HARDCORK® made from cork, fibers and a thermosetting matrix. HARDCORK® can be manufactured as a core material, sandwich panel or complex molded part.

JEC Forum DACH‘s primary goal is to promote the DACH region’s dynamic composites ecosystem. Besides an extensive program of business meetings and conferences, innovation will have a special place in Augsburg from November 29 to 30, 2022 as attendees will have the opportunity to witness the JEC Composites Startup Booster and the AVK Awards. Winners of both competitions will be announced during a dedicated ceremony on November 29th.

The five finalists are:

BioWerkz: Closing the Loops
At BioWerkz a new bio-based, resource-efficient, and CO2-negative material called “NEWood” is developed,  using only wood waste and agricultural waste bound using fungal mycelium; the root network of mushrooms as a natural binder without the need for any synthetic binders.

Bufo Technology – HARDCORK: High-Performance Biobased Composite – Superior by nature
Bufo Technology has developed the high-performance composite material HARDCORK® made from cork, fibers and a thermosetting matrix. HARDCORK® can be manufactured as a core material, sandwich panel or complex molded part.

Cavicore: Water soluble salt cores for the production of hollow carbon fiber parts
CAVICORE produces ready-to-use water soluble cores for the realization of hollow composite parts. Their “lost cores” have the advantage of being temperature-resistant, stable as well as eco-friendly and recyclable, as they consist of pure salts without binders.

Composite Recycling: Closing the loop on Composite Materials
Composite Recycling has developed a highly energy efficient and sustainable process to separate the resin from the fibres. With the Ecole Polytechnique Fédérale de Lausanne, the team has designed a post-treatment to clean the fibres and make them reusable in new composites, closing the loop.

Microwave Solutions GmbH: Imagineering a sustainable future
Agile and modular microwave plasma and selective depolymerization technology for molecular recycling, fiber recovery and nanomaterial creation.