From the Sector

Reset
19 results
23.02.2024

RISE® 2024: Call for Presentations and Award Nominations

INDA, the Association of the Nonwoven Fabrics Industry, announced a call for presentations and award nominations for the RISE® (Research, Innovation & Science for Engineered Fabrics) Conference. RISE will be held October 1-2, 2024, at the James B. Hunt, Jr. Library, North Carolina State University, Raleigh, North Carolina. RISE is a two-day conference presenting new research and science that drives innovation and product development. The theme for this year’s event is “The Other Sustainability Story: Extended Use and Reduced Consumption.”

Nonwoven professionals are encouraged to submit their technical abstracts by Friday, April 12, 2024. Topics being considered are raw materials, equipment and processing, product-related technologies, and applications.  Abstracts may be submitted via the RISE website. For questions about abstract submissions, contact Deanna Lovell.

INDA, the Association of the Nonwoven Fabrics Industry, announced a call for presentations and award nominations for the RISE® (Research, Innovation & Science for Engineered Fabrics) Conference. RISE will be held October 1-2, 2024, at the James B. Hunt, Jr. Library, North Carolina State University, Raleigh, North Carolina. RISE is a two-day conference presenting new research and science that drives innovation and product development. The theme for this year’s event is “The Other Sustainability Story: Extended Use and Reduced Consumption.”

Nonwoven professionals are encouraged to submit their technical abstracts by Friday, April 12, 2024. Topics being considered are raw materials, equipment and processing, product-related technologies, and applications.  Abstracts may be submitted via the RISE website. For questions about abstract submissions, contact Deanna Lovell.

RISE® Innovation Award
In addition, INDA is requesting nominations for innovative nonwoven products and technologies for the RISE® Innovation Award. INDA will consider categories such as raw materials, roll goods, converting, packaging, active ingredients, binders, additives and end products for nominations. This Award recognizes innovation in areas within and on the periphery of the nonwovens industry, utilizing advanced science and engineering principles to develop solutions to problems and advance the usage of nonwovens.

Three finalists will be chosen to present their innovations to technology scouts, scientists, researchers, and industry professionals on Tuesday, October 1st. Nominations may be submitted via the INDA website. The Award submission deadline is July 29, 2024. For questions about the Award, contact Vickie Smead.

Last year, the RISE® Innovation Award was presented to TiHive for their SAPMonit technology.

Source:

INDA, the Association of the Nonwoven Fabrics Industry

Test kit for textile microfibre shedding Hohenstein
Test kit for textile microfibre shedding
19.12.2023

New test kit for textile microfibre shedding

In cooperation with testing provider Hohenstein, Under Armour is launching a new fiber-shed test kit. It will help textile companies along the supply chain to develop lower shed materials during product development. The companies carry out the test themselves in-house using the test kit or can commission Hohenstein as a testing service provider.

The kit is a one-off purchase, after which users can buy additional materials from project partner James Heal. By using the new kit, Under Armour can reliably assess the quality and shed rate of the materials from suppliers.

For Hohenstein customers, the test kit is a useful addition to their microplastics tests. It is a quick and relatively inexpensive preliminary test that ensures better early-stage results for the end product.

During the production, wear and laundering of synthetic and natural fabrics, fibre shedding occurs in varying degrees. Hohenstein and Under Armour expect that their test method will help the industry better understand and reduce its contribution to the microfibre problem.

In cooperation with testing provider Hohenstein, Under Armour is launching a new fiber-shed test kit. It will help textile companies along the supply chain to develop lower shed materials during product development. The companies carry out the test themselves in-house using the test kit or can commission Hohenstein as a testing service provider.

The kit is a one-off purchase, after which users can buy additional materials from project partner James Heal. By using the new kit, Under Armour can reliably assess the quality and shed rate of the materials from suppliers.

For Hohenstein customers, the test kit is a useful addition to their microplastics tests. It is a quick and relatively inexpensive preliminary test that ensures better early-stage results for the end product.

During the production, wear and laundering of synthetic and natural fabrics, fibre shedding occurs in varying degrees. Hohenstein and Under Armour expect that their test method will help the industry better understand and reduce its contribution to the microfibre problem.

“Until now, integrating fiber-shed testing into industry research and development activities has required a significant time and cost investment,” said Kyle Blakely, Senior Vice President of Innovation for Under Armour. “At Under Armour, we believe intervening early to mitigate shedding is critical, which is why our test method is designed to specifically address these time and cost barriers.”

(c) Global Fashion Agenda
04.11.2022

Highlights of the Global Fashion Summit Singapore Edition

Hosted outside of Copenhagen for the first time in its 13-year history, on 3 November, Global Fashion Summit assembled over 250 stakeholders representing manufacturers, garment workers, retailers, brands, suppliers, NGOs, policy, and innovators in Singapore and online to spur industry action. The Summit was presented by Global Fashion Agenda (GFA), the non-profit organisation that is accelerating the transition to a net positive fashion industry.
 
The latest edition of the Summit was centred around the theme ‘Alliances for a New Era’, building on dialogues from the June edition in Copenhagen and gathering leaders from across the entire value chain to elevate diverse voices and foster alliances within the fashion industry and beyond, to drive sustainable impact.
 

Hosted outside of Copenhagen for the first time in its 13-year history, on 3 November, Global Fashion Summit assembled over 250 stakeholders representing manufacturers, garment workers, retailers, brands, suppliers, NGOs, policy, and innovators in Singapore and online to spur industry action. The Summit was presented by Global Fashion Agenda (GFA), the non-profit organisation that is accelerating the transition to a net positive fashion industry.
 
The latest edition of the Summit was centred around the theme ‘Alliances for a New Era’, building on dialogues from the June edition in Copenhagen and gathering leaders from across the entire value chain to elevate diverse voices and foster alliances within the fashion industry and beyond, to drive sustainable impact.
 
The Summit’s first international edition facilitated more conversations with manufacturer and supply chain voices to discuss crucial challenges and opportunities around working collaboratively with brands on equal terms. The programme featured bold panels, case studies, masterclasses and leadership roundtables reflecting on topics including ‘Data Scarcity: A Crisis of Measurement?’, ‘Disruption for Better Wage Systems’, ’Community and Circularity’, ‘Connecting the EU Textiles Strategy with the Value Chain’ and ‘Our Energy Transformation Moment’.
 
Attendees heard from over 50 speakers including H.E. Sandra Jensen Landi, Ambassador of Denmark to Singapore & Ambassador-Designate of Denmark to Brunei; H.E. Iwona Piórko, Ambassador of the European Union to Singapore; Anne-Laure Descours, Chief Sourcing Officer, PUMA; Baptiste Le Gal, Chief Revenue Officer APAC, Vestiaire Collective; Christian James Smith, Head of Sustainability Stakeholder Engagement, Zalando; Ninh Trinh, Director of Responsible Sourcing & Sustainability, Target; Roger Lee, CEO, TAL Apparel; Wilson Teo, President, Singapore Fashion Council; Edwin Keh, Chief Executive Officer, The Hong Kong Research Institute of Textiles and Apparel, Ashila Dandeniya, Founder, StandUp Lanka; and more.

Key takeaways and highlights from the event include:

  • Global Fashion Agenda announced a new alliance with BBC Storyworks Commercial Productions to launch a film series on BBC.com, which is currently in the early stages of development. The new series will present human-centric stories focusing on both social and environmental sustainability in the fashion industry. It will be released to a wide audience in 2023.
  • Federica Marchionni outlined the crucial need for accurate and robust data to substantiate sustainability claims and credentials but acknowledged that the focus on finding ‘perfect’ data cannot be allowed to stifle progress. Global Fashion Agenda will build upon Summit discussions to reflect on how the industry can accurately measure and communicate sustainability performance and illuminate the data credibility challenges.
  • The session ‘Establishing circular fashion systems in Cambodia & Vietnam’ outlined the first steps taken by the Global Circular Fashion Forum to establish circular fashion systems in Vietnam and Cambodia with regional stakeholders, government, brand and manufacturer representation.
  • Throughout the Summit, the Innovation Forum connected fashion companies with sustainable solution providers. Exhibitors included Better Work , Circular Fashion Partnership, Compreli, Kno Global, Planatones by Noyon Lanka, Redress Design Award and The ID Factory.
  • Through conversations such as ‘Disruption for Better Wage Systems’ and ‘Empowering the Worker Majority’, there was a resounding message for people to consider the real people in the value chain. Ensuring dignified livelihoods for these workers should have the same sense of urgency as emissions reductions. 
Source:

Global Fashion Agenda

(c) BTMA
The James Heal AirPro air permeability tester
11.10.2022

BTMA: Testing equipment manufacturer James Heal celebrates 150th anniversary

Long-standing BTMA member James Heal is celebrating its 150th anniversary this year, the company’s formation dating back to 1872, when it was listed as an oil and tallow merchant and mill furnisher in Yorkshire, UK.

Today, as a testing equipment manufacturer for textiles and nonwovens, James Heal continues to expand its range, with a focus on making testing simple – most notably with the introduction of its Performance Testing collection of instruments, most recently the AirPro and HydroView systems.

AirPro
The new James Heal AirPro air permeability tester is used to test the resistance of the flow of air through woven, knitted and nonwoven textiles. Its software offers flexibility with standards and  comprehensive reporting options and different test head sizes are available, making it suitable for a range of applications and standards

Long-standing BTMA member James Heal is celebrating its 150th anniversary this year, the company’s formation dating back to 1872, when it was listed as an oil and tallow merchant and mill furnisher in Yorkshire, UK.

Today, as a testing equipment manufacturer for textiles and nonwovens, James Heal continues to expand its range, with a focus on making testing simple – most notably with the introduction of its Performance Testing collection of instruments, most recently the AirPro and HydroView systems.

AirPro
The new James Heal AirPro air permeability tester is used to test the resistance of the flow of air through woven, knitted and nonwoven textiles. Its software offers flexibility with standards and  comprehensive reporting options and different test head sizes are available, making it suitable for a range of applications and standards

HydroView
The HydroView hydrostatic head tester is meanwhile designed to measure the penetration of water in materials which have an end use that requires water resistance, such as those in the medical, geotextiles and nonwovens sectors. It is also proving essential in the testing of end-use applications for technical textiles, such as in protective gloves, diving dry suits and winter sports apparel, to fishing waders, roofing, tenting, ground sheets and more.

(c) Willy Bogner GmbH & Co. KGaA
04.10.2022

BOGNER and James Bond celebrate anniversaries and partnership

BOGNER and James Bond – a perfect symbiosis of action, entertainment and athluxury lifestyle. The partnership started over 50 years ago when Willy Bogner Junior filmed the ski scenes for On Her Majesty's Secret Service (1969). Building on the success of the collaboration, Willy went on to work on three more James Bond productions. In 2022, both partners celebrate an anniversary: 90 years of BOGNER and 60 years of the James Bond film franchise. To mark the long-standing partnership as well as the two anniversaries, a limited capsule collection is released, consisting of two complete ski outfits for men and women, ski hardware and accessories.

BOGNER and James Bond – a perfect symbiosis of action, entertainment and athluxury lifestyle. The partnership started over 50 years ago when Willy Bogner Junior filmed the ski scenes for On Her Majesty's Secret Service (1969). Building on the success of the collaboration, Willy went on to work on three more James Bond productions. In 2022, both partners celebrate an anniversary: 90 years of BOGNER and 60 years of the James Bond film franchise. To mark the long-standing partnership as well as the two anniversaries, a limited capsule collection is released, consisting of two complete ski outfits for men and women, ski hardware and accessories.

Source:

Willy Bogner GmbH & Co. KGaA

Wes Fisher INDA Director of Government Affairs (c) INDA
Wes Fisher INDA Director of Government Affairs
22.09.2022

INDA: Wes Fisher new Director of Government Affairs

INDA, the Association of the Nonwoven Fabrics Industry, has named government relations and external affairs strategist and advocate Wes Fisher as its new Director of Government Affairs to raise the association’s profile in Washington, D.C. He brings strong liaising skills advancing industries’ interest to regulatory agencies such as the Centers for Disease Control and Prevention, U.S. Department of Agriculture, Food and Drug Administration, and state-level departments.

Most recently, he was senior director of government affairs at the Pet Advocacy Network where he led government relations and legislative strategy for the pet care industry’s national trade association.  Fisher’s background includes providing testimony on hundreds of bills and regulations for associations and creating policy positions, notably on single-use plastics and sustainability.
He has held positions working at the American Legislative Exchange Council and then the National Automatic Merchandising Association where he led state government relations and external affairs for the 1,000-members representing the vending and retail industry.   

INDA, the Association of the Nonwoven Fabrics Industry, has named government relations and external affairs strategist and advocate Wes Fisher as its new Director of Government Affairs to raise the association’s profile in Washington, D.C. He brings strong liaising skills advancing industries’ interest to regulatory agencies such as the Centers for Disease Control and Prevention, U.S. Department of Agriculture, Food and Drug Administration, and state-level departments.

Most recently, he was senior director of government affairs at the Pet Advocacy Network where he led government relations and legislative strategy for the pet care industry’s national trade association.  Fisher’s background includes providing testimony on hundreds of bills and regulations for associations and creating policy positions, notably on single-use plastics and sustainability.
He has held positions working at the American Legislative Exchange Council and then the National Automatic Merchandising Association where he led state government relations and external affairs for the 1,000-members representing the vending and retail industry.   

At INDA, he will serve as the liaison between the industry and government legislative and regulatory bodies by preparing formal submissions to the federal government articulating industry positions, and representing INDA on the Industry Trade Advisory Committee for Textiles and Apparel (ITAC 12) among other responsibilities in this key position.

Fisher holds a Bachelor’s degree in Political Science from James Madison University in Harrisonburg, VA. He also sits on the board of directors of the Washington Area State Relations Group, and was appointed by the Governor of Virginia to serve on the State Rare Disease Council.

More information:
INDA Wes Fisher Government Affairs
Source:

INDA

Photo: AWOL
20.09.2022

Halley Stevensons: Unique waxed cotton finishing with new Monforts line

Monforts has installed and commissioned a new Montex finishing range at the Baltic Works of Halley Stevensons in Dundee, Scotland, to further boost the weatherproofing specialist’s highly flexible operations.

The range, with a working width of two metres, was built at the Montex assembly plant in Austria and consists of a Montex®Coat coating unit in knife execution for paste and foam coating and a Montex 8500 6F stenter.

Founded in 1864, Halley Stevensons has amassed unique technical know-how and manufacturing experience in the art of waxed cotton for weatherproofed fabrics and is able to provide international orders in custom colours and finishes to very low minimum quantities where required. The company exports worldwide and its premium brand customers include Belstaff, Barbours, Filson and J.Crew.

The range has replaced one of the company’s older stenter/coating lines and has already enabled Halley Stevensons to recreate various products with lower coating applications at higher speeds than was previously possible.

Monforts has installed and commissioned a new Montex finishing range at the Baltic Works of Halley Stevensons in Dundee, Scotland, to further boost the weatherproofing specialist’s highly flexible operations.

The range, with a working width of two metres, was built at the Montex assembly plant in Austria and consists of a Montex®Coat coating unit in knife execution for paste and foam coating and a Montex 8500 6F stenter.

Founded in 1864, Halley Stevensons has amassed unique technical know-how and manufacturing experience in the art of waxed cotton for weatherproofed fabrics and is able to provide international orders in custom colours and finishes to very low minimum quantities where required. The company exports worldwide and its premium brand customers include Belstaff, Barbours, Filson and J.Crew.

The range has replaced one of the company’s older stenter/coating lines and has already enabled Halley Stevensons to recreate various products with lower coating applications at higher speeds than was previously possible.

Waxed cotton was originally developed by sailors in the early 15th century when Scottish North Sea herring fleets began treating flax sailcloth with fish oils and grease in an attempt to waterproof their sails. Remnants of these sails were used by the sailors as capes to withstand the high winds and sea spray.

By the mid 1850s, sailcloth was being treated with linseed oil, but while initially highly effective, it would yellow and stiffen through weathering over time and eventually lose its waterproofing qualities.

In the years that followed, various treatments were applied to cottons in an attempt to find the most effective weatherproofing solution, and the combination of densely-woven cotton impregnated with a paraffin waxed coating proved most successful. For over 150 years, Halley Stevensons created many different variations of both woven constructions and finishing treatments and now supplies thousands of metres of waxed cotton every year, with each roll produced to custom specifications.

“The beauty of waxed cotton is its durability and longevity,” says Managing Director James Campbell. “The fabrics are breathable, with the wax adjusting to ambient temperatures to be softer and more breathable in warm weather and stiffer and more wind proof in cold conditions.”
While traditional waxes are petroleum or paraffin based, Halley Stevensons has always been comfortable about using a waste product from industry and reusing it to make products that last a lifetime.  

“We are always exploring different finishing techniques and one of our most popular finishes is our hybrid aero – an emulsified blend of waxes,” Campbell says. “This fabric is water repellent but has little wax in the mixture so the handle is much drier to touch than the traditional wet waxes.”

The company has also recently launched a new 100% plant-based wax – Ever Wax Olive – consisting of a blend of olive oil, rape seed and castor bean with comparable water repellence to petroleum and a far better rating than other natural waxes which have come before it.

“The high tradition of skills and fabric innovation imposed by our original guildsmen is still our benchmark standard of honest workmanship today,” Managing Director James Campbell concludes “We use responsibly sourced cotton fabrics and processes that are gentle to the product and low impact to the environment. Our dyeing methods use very low levels of water and our waxes are simply heated up for application and cooled down to store when not in use, meaning no waste discharges. Now, with this new Monforts line, we are also achieving running speeds two-to-three times faster than with the older stenter, combined with less gas usage. It’s proved a great partnership.”

(c) adidas AG
27.07.2022

adidas aims at creating a more equitable and inclusive future of sport

To celebrate the 50th year of Title IX, adidas announced a series of brand initiatives and commitments aimed at creating a more equitable and inclusive future of sport . Commencing with the signing of 15 female student-athletes to name, image, and likeness (NIL) deals across seven collegiate sports, the brand is further underscoring its commitment to women and LGBTQI+ athletes in sport through an expanded partnership with Athlete Ally to grow chapter footprints on college campuses.

In addition, adidas is partnering with Candace Parker to create a mentorship program that provides newly signed student-athletes with guidance as they navigate the NIL era.

“As a leading global sports brand, we're focused on creating long-term equity in sport . That means both investing in the next generation of athletes today and also supporting them in the future,” said Rupert Campbell, president of adidas North America. “We welcome this group of powerful student-athletes to the adidas family and look forward to working alongside them to define what is possible for the future of sport.”

To celebrate the 50th year of Title IX, adidas announced a series of brand initiatives and commitments aimed at creating a more equitable and inclusive future of sport . Commencing with the signing of 15 female student-athletes to name, image, and likeness (NIL) deals across seven collegiate sports, the brand is further underscoring its commitment to women and LGBTQI+ athletes in sport through an expanded partnership with Athlete Ally to grow chapter footprints on college campuses.

In addition, adidas is partnering with Candace Parker to create a mentorship program that provides newly signed student-athletes with guidance as they navigate the NIL era.

“As a leading global sports brand, we're focused on creating long-term equity in sport . That means both investing in the next generation of athletes today and also supporting them in the future,” said Rupert Campbell, president of adidas North America. “We welcome this group of powerful student-athletes to the adidas family and look forward to working alongside them to define what is possible for the future of sport.”

The initial group of student-athletes was revealed at the brand’s Title IX celebration in New York City announced by Billie Jean King and Ally Love , attended by Layshia Clarendon, Kristine Lilly, Ifeoma (Ify) Onumonu, Imani Dorsey, Kelsey Robinson, media, family, and friends.

The following student-athletes have been announced as adidas partners:
Maddy Anderson – Mississippi St., soccer
Emily Mason – Rutgers, soccer
Brianna Copeland – Indiana, softball     
Erin Moss – Georgia Tech, volleyball
Lauren Dooley – Kansas, volleyball
Moriah Oliveira – Miami, track & field
Kinsey Fiedler – Washington, softball
Gianna Pielet – Texas A&M, tennis
Jayci “Jay” Goldsmith – Texas A&M, tennis
Izzy Redmond – ASU, gymnastics
Nicklin Hames – Nebraska, volleyball
Jaiden Thomas – NC State, soccer
Jameese Joseph – NC State, soccer
Hailey Van Lith – Louisville, basketbal
India Wells – Grambling State, softball

An Investment in All Athletes
adidas believes long-term equity in sport starts with investment. This initial all-female group of student-athletes builds on the brand’s March announcement of a sweeping, equitable and inclusive NIL Ambassador Network reaching more than 50,000 eligible student-athletes across 23 sports, all genders and 109 D1 universities beginning this fall at Power 5 programs and HBCUs.

Looking towards the next 50 years of Title IX, the Education Amendment prohibiting discrimination against students based on sex, adidas will continue investing in athletes and programs that increase representation and visibility, with this being a commitment to create a more progressive future of equity in sport .

More information:
adidas Sportswear Equality
Source:

adidas AG

(c) Messe Frankfurt (HK) Ltd.
17.05.2022

Cinte Techtextil China to address personal hygiene and sustainability demands

With global consumers becoming more conscious about personal hygiene and environmental protection, exhibitors at Cinte Techtexil China will spotlight materials and technologies for products that respond to these trends. The fair will probe into the associated growth opportunities as the country is one of the leading markets for nonwovens and technical textiles. The event will be held from 6 – 8 September at the Shanghai New International Expo Centre.

The technical textiles and nonwovens industries, the latter notably, are significantly expanding amid the pandemic. A recent forecast[1] predicts that the global polypropylene nonwoven fabric market will continue to rise at a CAGR of 6.7%, reaching USD 39.23 billion by 2028. The anticipated growth is bolstered by demands in end-use industries such as sanitation, medical, automotive and more. In 2020, Asia Pacific was named the largest regional market in the world and is expected to grow significantly over the forecasted period.

With global consumers becoming more conscious about personal hygiene and environmental protection, exhibitors at Cinte Techtexil China will spotlight materials and technologies for products that respond to these trends. The fair will probe into the associated growth opportunities as the country is one of the leading markets for nonwovens and technical textiles. The event will be held from 6 – 8 September at the Shanghai New International Expo Centre.

The technical textiles and nonwovens industries, the latter notably, are significantly expanding amid the pandemic. A recent forecast[1] predicts that the global polypropylene nonwoven fabric market will continue to rise at a CAGR of 6.7%, reaching USD 39.23 billion by 2028. The anticipated growth is bolstered by demands in end-use industries such as sanitation, medical, automotive and more. In 2020, Asia Pacific was named the largest regional market in the world and is expected to grow significantly over the forecasted period.

The prediction reaffirms the growth prospects of nonwovens. In this regard, industry players expressed much optimism about associated future opportunities during Cinte Techtextil China last year. “The field of nonwovens is poised for a positive growth as the awareness of personal hygiene and pandemic prevention sustains in the domestic market,” commented Mr James Gao, Head of Marketing and Textile Technologies, Uster Technologies (China) Co Ltd. He added: “We decided to join the fair and showcase our new launches as we remain confident in the future development of the industry, especially since China is dominating the global scene.”

Going green is the way forward
Turning to yarns and fibres, the sector is shifting to greener and smarter production that echoes the trend towards sustainability that is gaining considerable traction across the globe. Meanwhile in China, this movement was observed by many exhibitors at the 2021 edition, including Mr Roberto Galante, Plant Manager of FMMG Technical Textiles (Suzhou) Co Ltd, the Chinese subsidiary of the Fil Man Made Group. He mentioned: “The market is paying more attention to environmental protection, and we receive enquiries about special yarns for this every day. We focus on technical yarns for filtration as well as anti-bacterial properties, which are very important for the environment. The potential here in China is incredible and this is a big opportunity for everybody.”

Cinte Techtextil China’s product categories cover 12 application areas, which comprehensively span across a full range of potential uses in modern technical textiles and nonwovens. These categories also cover the entire industry, from upstream technology and raw material providers to finished fabrics, chemicals and other solutions. This scope of product groups and application areas ensures that the fair is an effective business platform for the entire industry.

Hexcel Introduces G-Vent Technology into Marine Market (c) Hexcel
New technology for marine composites proven to reduce time and cost in manufacturing through out-of-autoclave processing
30.03.2022

Hexcel Introduces G-Vent Technology into Marine Market

  • New technology for marine composites proven to reduce time and cost in manufacturing through out-of-autoclave processing

Hexcel Corporation (NYSE: HXL) has developed a new technology for out-of-autoclave (OoA) processing that delivers a game-changing reduction in process time and cost for marine manufacturers without compromising mechanical performance. Hexcel has leveraged its experience in aerospace and wind energy to develop its new G-Vent technology for OoA processing of highly loaded, thick section marine structures such as masts, foils, and wind-assisted ship propulsion (WASP) components. Hexcel’s full range of marine prepregs are now available with integrated G-Vent technology, reducing the requirement for debulking steps and ensuring extremely low porosity (<1%) irrespective of the laminate thickness.

  • New technology for marine composites proven to reduce time and cost in manufacturing through out-of-autoclave processing

Hexcel Corporation (NYSE: HXL) has developed a new technology for out-of-autoclave (OoA) processing that delivers a game-changing reduction in process time and cost for marine manufacturers without compromising mechanical performance. Hexcel has leveraged its experience in aerospace and wind energy to develop its new G-Vent technology for OoA processing of highly loaded, thick section marine structures such as masts, foils, and wind-assisted ship propulsion (WASP) components. Hexcel’s full range of marine prepregs are now available with integrated G-Vent technology, reducing the requirement for debulking steps and ensuring extremely low porosity (<1%) irrespective of the laminate thickness.

To evaluate the new technology, Hexcel completed a test program with Q.I. Composites, a world leader in non-destructive testing in performance marine applications. The program evaluated HexPlyÒ 40- layer prepreg samples prepared with G-Vent technology. Carbon fiber panels made with no debulking revealed approximately three times less porosity than those using a typical 10-minute debulk with every second ply. Ultrasonic and CT scan analysis by Q.I. Composites confirmed the void content results with porosity levels in line with state-of-the-art autoclaved carbon prepreg foils. Key tensile, compressive and interlaminar shear strength results were also higher for the G-Vent panels.

“We evaluated the quality of thick laminates produced with G-Vent and found that they are comparable to laminates made in an autoclave as per best practice in the market,” said Stefano Beltrando, CEO, Q.I. Composites. “Even more impressive, they were achieved with no debulking.” Tom James, Business Development Manager at Hexcel, said, “We are absolutely delighted with the feedback from Q.I. that confirms our own test data and positions G-Vent technology as a leading OoA process enabler for high-performance thick laminate structures. G-Vent provides a faster and more cost-effective manufacturing route for large marine structures with absolutely no compromise in mechanical performance.”

Source:

100percentmarketing

28.01.2022

Jamé: A fluid-wear collection made with Bemberg™ by Asahi Kasei

Jamé’s concept.   
Jamé is inspired by the ancient Pay-Jamé: a piece of clothing that a woman or a man used to wear for fluid wellbeing 24/7 regardless of the activity, or the location, or duration time it is needed for. It’s a comfy refined outfit to make people feel free.

Jamè’s values.
Jamé is designed and made in Italy, digitally printed and created to deliver wellness, style, and 24/7 comfort.  
Jamé’s fabric of choice is Bemberg™, a textile that gives Jamé the highest contemporary qualities: Jamé garments are cool in summer, warm in winter, perfect all year round, fashionable, trendy and versatile. The ideal companion for everyday activities, Jamé is perfect for both indoors and outdoors, the perfect outfit for every occasion, day or night.

Jamé’s concept.   
Jamé is inspired by the ancient Pay-Jamé: a piece of clothing that a woman or a man used to wear for fluid wellbeing 24/7 regardless of the activity, or the location, or duration time it is needed for. It’s a comfy refined outfit to make people feel free.

Jamè’s values.
Jamé is designed and made in Italy, digitally printed and created to deliver wellness, style, and 24/7 comfort.  
Jamé’s fabric of choice is Bemberg™, a textile that gives Jamé the highest contemporary qualities: Jamé garments are cool in summer, warm in winter, perfect all year round, fashionable, trendy and versatile. The ideal companion for everyday activities, Jamé is perfect for both indoors and outdoors, the perfect outfit for every occasion, day or night.

Environmental responsibility.
Every Jamé clothing is 100% recyclable and manufactured following a very contemporary and responsible made-to-order business model. The latest and greatest digital print technology assures us to avoid waste and over-production.
This means endless customization possibilities, creating a long lasting, high-quality product.

Styling.
Thanks to the expertise and knowledge of its founders Patrizia Marforio and Niccolò Zucchi Frua, Jamé’s vision is deeply rooted in the Italian design and textile tradition.
Jamé's historic archive - made up of more than 17.000 different textures from the 1920s to present day - seamlessly translating into the widest and deepest pattern choice in this one-of-a-kind collection.

Jamé’s fabric of choice:
Bemberg™ is the name of a technologically advanced fiber produced by Asahi Kasei. Bemberg™ is based on regenerated cellulose fiber made from the smart tech transformation of cotton linters.
As a pre-consumer material obtained from the manufacturing process of cotton seeds oil that is converted into fiber through a traceable and transparent closed loop process, Bemberg™ DNA is deeply based on a circular economy approach.
Bemberg™ is gentle on the skin, with amazing touch and exceptional moisture management properties: it quickly absorbs and releases moisture through very small waterways, keeping the wearer cool, fresh, and comfortable at any time of the year.

Smoking jacket worn by John F. Kennedy in 1963 Photo: Sartoria Litrico
Smoking jacket worn by John F. Kennedy in 1963
04.01.2022

Bemberg™ celebrates 90 years of fashion & heritage @ Pitti Uomo

At Pitti Uomo, Bemberg™ by Asahi Kasei celebrates the new year exploring the company’s 90 years anniversary and journey. In Florence, Bemberg™ past and present are linked by style: on display are key historic garments worn by icons such as J.F. Kennedy belonging to historic Roman Sartoria Litrico together with Bemberg ™ new visionary claim “Crafted Elegance“.

At Pitti Uomo, Bemberg™ by Asahi Kasei celebrates the new year exploring the company’s 90 years anniversary and journey. In Florence, Bemberg™ past and present are linked by style: on display are key historic garments worn by icons such as J.F. Kennedy belonging to historic Roman Sartoria Litrico together with Bemberg ™ new visionary claim “Crafted Elegance“.

On January 11th, Bemberg™ will be at Pitti Uomo 101 featuring an exclusive collaboration with Luca Litrico, head of the Roman historic Sartoria Litrico, founded by his uncle Angelo Litrico in 1951. He became famous for crafting the highest-quality suits for all the most important men of Dolce Vita era, from Richard Burton to Marcello Mastroianni. Its historic relevance has even been recognized by the Ministry of Cultural Heritage, thanks to its archive composed of hundreds of photos and sketches signed by Angelo Litrico himself. For this occasion, Bemberg™ will showcase four historic suits wore by true style arbiters a such as: former US president John F. Kennedy, dolce vita poster-boy Rossano Brazzi, American astronaut James B. Irwin and iconic fashion designer Angelo Litrico. All garments feature stylish linings woven with Bemberg™ fiber disclosing its ductility always in vogue through time. Over the decades, Bemberg™ established heritage in formal lining has expanded into new territories and able to represent also contemporary outerwear styles.
 
“We are so excited to be back in Florence. Pitti Uomo and Italy are the perfect starting point of our journey through style.” says Mr. Koji Hamada, CEO of Asahikasei Fibers Italia, “At our booth visitors can glimpse the link between past and present, our values and chromosomes for the fashion to come.”

Bemberg™ vision is centred around contemporary beauty, and uniqueness – the fibre manufacturing is exclusively taking place in Nobeoka, where its closed-loop circular economy production approach together its transparent and traceable processes are able to guarantee the responsible certified values.
 
Bemberg™ by Asahi Kasei will unveil the second chapter of its journey at Première Vision in Paris with an exhibition where visitors will be able to explore the fashion world, from India to Japan, through fabrics and style of today and tomorrow.

More information:
Bemberg™
Source:

GB Network

Beaulieu Fibres International: Fibresand and Fibre Reinforced Rootzones (c) Nottingham Forest Football Club
Beaulieu Straight Fibres - Nottingham Forest natural grass reinforced rootzones
04.06.2021

Beaulieu Fibres International: Fibresand and Fibre Reinforced Rootzones

Mansfield Sand Limited’s sports sand and rootzones are reinforced with polypropylene straight fibres from Beaulieu Fibres International.

  • PP straight fibres manufactured in Belgium by Beaulieu Fibres International
  • Fibres distributed in the UK by James Robinson Fibres
  • Product developed and manufactured by Mansfield Sand.
  • The technology increases pitch stability and resilience even with frequent and intensive use.

Fibresand and Reinforced Rootzones are manufactured in the UK by Mansfield Sand, one of the the leading suppliers of the product. Fibresand and Reinforced Rootzones are a natural sports product reinforced with Beaulieu’s PP Straight Fibre, distributed in the UK by James Robinson Fibres. Used in the top 100mm within the pitch construction profile, it enhances the natural grass root structure while giving the pitches increased stability and resilience.

Many Premiership, EFL and Scottish clubs are choosing Fibresand and Fibre Reinforced Rootzone.

Mansfield Sand Limited’s sports sand and rootzones are reinforced with polypropylene straight fibres from Beaulieu Fibres International.

  • PP straight fibres manufactured in Belgium by Beaulieu Fibres International
  • Fibres distributed in the UK by James Robinson Fibres
  • Product developed and manufactured by Mansfield Sand.
  • The technology increases pitch stability and resilience even with frequent and intensive use.

Fibresand and Reinforced Rootzones are manufactured in the UK by Mansfield Sand, one of the the leading suppliers of the product. Fibresand and Reinforced Rootzones are a natural sports product reinforced with Beaulieu’s PP Straight Fibre, distributed in the UK by James Robinson Fibres. Used in the top 100mm within the pitch construction profile, it enhances the natural grass root structure while giving the pitches increased stability and resilience.

Many Premiership, EFL and Scottish clubs are choosing Fibresand and Fibre Reinforced Rootzone.

Beyond football, Mansfield Sand Fibresand products are being used in a variety of winter sports pitches, the equine market and are increasingly being specified for urban public green space and landscape projects to reinforce natural grass areas and maintain aesthetics even when suffering from heavy traffic burden.

ITA
04.05.2021

2021 Aachen Reinforced! Symposium free of charge for all attendees

Institut für Textiltechnik of RWTH Aachen University has changed the format of the 2021 Aachen Reinforced! Symposium to an online only format. The programme was shortened to suit the new format, with presentations taking place on Monday 10th May and Tuesday 11th May.

Institut für Textiltechnik of RWTH Aachen University has changed the format of the 2021 Aachen Reinforced! Symposium to an online only format. The programme was shortened to suit the new format, with presentations taking place on Monday 10th May and Tuesday 11th May.

The conference program for Monday, 10th May:
The programme will begin with exciting presentations on glass chemistry and fibres. A talk by Dr Anne Berthereau (Owens Corning Composites) on the race for always higher modulus glass fibres will be followed by a talk from Dr Hong Li (Nippon Electric Glass) on the potential of new high-strength and high-modulus glass fibres.
After two further presentations on high modulus and bioactive glass fibres from Muawia Dafir and Julia Eichhorn (TU Bergakademie Freiberg), we will learn about furnace efficiency as well as process monitoring and digitalisation in glass fibre production from René Meulemann (CelSian), Hans Gedon (Gedonsoft) and Julius Golovatchev (Incotelogy) respectively.
A presentation by Felix Quintero Martínez (Universidade de Vigo) will explore a novel method to produce ultra-flexible glass nanofibers.
The afternoon will continue with two presentations by Dr Christina Scheffler (Leibniz-Institut für Polymerforschung Dresden e.V. (IPF)) and Professor James Thomason (University of Strathclyde) in the field of glass fibre sizings and fibre-matrix interfaces. Finally, a closing presentation by Steve Bassetti (Michelman) will conclude the first day of the Symposium.

The entire conference programme is available on the website https://aachen-fibres.com/aachen-reinforced/general-information.
To register for the Symposium, use the following link: https://aachen-fibres.com/aachen-reinforced/registration

(c) Archroma
06.12.2018

Absolute Denim to become first denim manufacturer to convert 100% of its production to ground-breaking Aniline-free* indigo solution by Archroma

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, today announced that Thailand-based Absolute Denim will be the first denim manufacturer to switch 100% of its production to aniline-free* indigo dyeing.

Absolute Denim is a Thailand-based denim manufacturer producing high quality denim with a focus on eco-friendlier materials and processes. The company can produce up to 2 million meters of denim per month (that's approximately 1.5 million pairs of jeans!), for customers that include some of the biggest brands and retailers in the world.

Archroma’s Denisol® Pure Indigo 30 liquid dye was first launched in May 2018 as a non-toxic way to produce the traditional, iconic indigo blue that consumers associate with denim and jeans.

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, today announced that Thailand-based Absolute Denim will be the first denim manufacturer to switch 100% of its production to aniline-free* indigo dyeing.

Absolute Denim is a Thailand-based denim manufacturer producing high quality denim with a focus on eco-friendlier materials and processes. The company can produce up to 2 million meters of denim per month (that's approximately 1.5 million pairs of jeans!), for customers that include some of the biggest brands and retailers in the world.

Archroma’s Denisol® Pure Indigo 30 liquid dye was first launched in May 2018 as a non-toxic way to produce the traditional, iconic indigo blue that consumers associate with denim and jeans.

During production, some of the aniline stays locked into the indigo pigment and is difficult to wash off the fabric. The remainder of the aniline impurity, approximately 300 metric tons annually, is discharged during dyeing. This can be an issue as aniline is toxic to aquatic life. In addition, exposure levels to factory workers can be high. As a result of its toxicity (more hazardous than alkylphenols) it is now starting to feature on the restricted substance lists (RSL) of some major clothing brands and retailers.

The new Denisol® Pure Indigo 30 liq was therefore developed as an aniline-free* indigo solution for designers, manufacturers and brand owners who long for authentic indigo inspiration.

Archroma tested Denisol® Pure Indigo at Absolute Denim mill in Thailand. Archroma wanted to be sure that the new indigo dye would perform exactly the same as conventional indigo.

James Carnahan, Head of Sustainability at Archroma, comments: “At Archroma we continuously challenge the status quo in the deep belief that we can make our industry sustainable - but we cannot do it alone. Without forward-thinking manufacturers such as Absolute Denim to consciously adopt these eco-advanced innovations in their daily production, like our aniline-free* Denisol® Pure Indigo, we will not be able to move this industry forward on our resource-constrained world we live in. As consumers are increasingly aware of, and concerned about, climate change and ecological threats, this is not only the right thing to do - it is also good for business.”

“Deep down inside most of us want the world to be a better place for our loved ones and for future generations,” insists Vichai Phromvanich, Board Member, Absolute Denim, “starting with how we live, what we eat, what we wear, still trying to be cool, fashionable, still trying to be environmentally conscious. Archroma’s aniline free indigo project is therefore something we as a new generation manufacturer have supported from the beginning, by opening our doors for tests in the project phase, and now by sending out our articles to many of our customers. For us, after all, a nice pair of jeans looks even nicer without aniline!”

* Below limits of detection

C.L.A.S.S. Proudly Supports Textile Exchange’s Sustainability Conference in Milan (c) GB Network Marketing & Communication
16.10.2018

C.L.A.S.S. Proudly Supports Textile Exchange’s Sustainability Conference

  • Textile Exchange’s Sustainability Conference - Milan, October 22-24, 2018
  • The theme of the 2018 conference is United by Action: Accelerating Sustainability in Textiles and Fashion.

The conference offers an opportunity to connect with industry pioneers and learn about cutting edge solutions and innovations in textile and apparel sustainability. As a result, C.L.A.S.S., headquartered in Milan, the global resource for smart material innovation, education, marketing and communication, will be on hand to support this year’s theme.

Many of the materials the C.L.A.S.S. team will showcase speak to circular economy such as Re.VerSo™, Bemberg™ and ROICA™ by Asahi Kasei, Iluna Group and TINTEX Textiles and many others that use technological breakthroughs to offer fashion materials that provide significant reductions in water during the manufacturing process, an important step toward responsible future fashion systems.

  • Textile Exchange’s Sustainability Conference - Milan, October 22-24, 2018
  • The theme of the 2018 conference is United by Action: Accelerating Sustainability in Textiles and Fashion.

The conference offers an opportunity to connect with industry pioneers and learn about cutting edge solutions and innovations in textile and apparel sustainability. As a result, C.L.A.S.S., headquartered in Milan, the global resource for smart material innovation, education, marketing and communication, will be on hand to support this year’s theme.

Many of the materials the C.L.A.S.S. team will showcase speak to circular economy such as Re.VerSo™, Bemberg™ and ROICA™ by Asahi Kasei, Iluna Group and TINTEX Textiles and many others that use technological breakthroughs to offer fashion materials that provide significant reductions in water during the manufacturing process, an important step toward responsible future fashion systems.

During Textile Exchange’s Sustainability Conference, Giusy Bettoni, C.L.A.S.S. CEO and Founder and her team will have a dedicated space to engage attendees in an open discussion regarding the importance of fashion business strategies. The experience in the space, that will reflect an New York event created for C.L.A.S.S. by Ginger Design, will start with the vision of a film by Cristina Picchi that represents harmony between the various phases of the textile process and the cycles of natural elements. Visitors will walk through a three-dimensional installation designed by Cécile Feilchenfeldt to inspire creativity and explore the limitless possibilities using innovative smart materials.

“We are always proud to have a presence at international events including this year’s Textile Exchange’s Sustainability Conference. It is a great way for us to share our expertise regarding responsible innovation and new business model strategies. As C.L.A.S.S. is headquartered in Milan, we are proud that they selected our city for this year’s conference. Being held in Milan provides a chance for us to support Textile Exchange regarding smart material innovation, many of them produced in Italy.” said Bettoni.

Just off their return from Première Vision in Paris, Bettoni who is also the Sustainability Consultant for Smart Creation, recognizes the importance for her company to have a strong international presence to spread C.L.A.S.S.’ message to a global audience regarding responsible creation. 

As C.L.A.S.S. enters their second decade of business, they have expanded their business activities to include e-commerce that provides an opportunity for fashion start-up to purchase up to a maximum of 50, an initiative launched to support fashion start-ups. And a new division, C.L.A.S.S. Education, an initiative Bettoni co-founded with James Mendolia, also a Professor, Fashion Institute of Technology. Mendolia has been visiting universities to speak to fashion design, business, textiles and production students in Europe, Asia and North America to encourage attendees to infuse a new way of design thinking and move from a linear to a circular business model.   

Source:

GB Network Marketing & Communication

27.04.2018

HYGIENICALLY CLEAN HEALTHCARE ADVISORY BOARD ANNOUNCES FULL SLATE OF MEMBERS

TRSA, the global association for the linen, uniform and facility services industry, and the creator and administrator of the Hygienically Clean Certification announced today its 2018 Hygienically Clean Healthcare Advisory Board slate of members.

“The board is responsible for administering, enforcing, and revising TRSA’s Hygienically Clean Healthcare (HCH) Standards. Additional duties include establishing and maintaining criteria and procedures for the certification of healthcare textile processing in commercial, cooperatives, and in-house healthcare laundries and facilities. These subject matter experts will provide guidance regarding best management practices (BMPs), inspections and testing to ensure that the Hygienically Clean Healthcare Certification Program benefits consumers, laundry-processing facilities and textile services customers,” said Joseph Ricci, President and CEO of TRSA.

TRSA, the global association for the linen, uniform and facility services industry, and the creator and administrator of the Hygienically Clean Certification announced today its 2018 Hygienically Clean Healthcare Advisory Board slate of members.

“The board is responsible for administering, enforcing, and revising TRSA’s Hygienically Clean Healthcare (HCH) Standards. Additional duties include establishing and maintaining criteria and procedures for the certification of healthcare textile processing in commercial, cooperatives, and in-house healthcare laundries and facilities. These subject matter experts will provide guidance regarding best management practices (BMPs), inspections and testing to ensure that the Hygienically Clean Healthcare Certification Program benefits consumers, laundry-processing facilities and textile services customers,” said Joseph Ricci, President and CEO of TRSA.

Members of the newly formed board of directors, who represent the entire industry -- linen, uniform and facility service companies, large central laundries, healthcare linen, uniform and facility services customers of TRSA members, suppliers, and experts from related healthcare and other professional organizations -- will serve a three-year term:

Randy Bartsch
CEO, Ecotex Healthcare Linen Service Inc.
Chairman

Rick Kislia
Chief Operating Officer
Crescent Laundry
Vice Chairman

David J. Stern
President & CEO, Paris Companies
Secretary

Greg Anderson
CEO, Campus Laundry

Angela Becker
Senior Program Leader, Textile Care RD&E, Ecolab

Murray L. Cohen, PhD, MPH, CIH
Owner, Consultants in Disease and Injury Control (CDIC)

Dr. Alexis M. Elward, MD
Pediatric Infectious Disease
Washington University School of Medicine in St. Louis

Eoin Flavin
Director, European Operations, WSI

David F. Goldsmith, MSPH, PhD, LLC
George Washington & Georgetown Universities

James Hall
CEO, Northwest Health Care Linen

Tony Long
VP, Risk Management, Angelica
Lynn A. Moreau, RN, BSN
Clinical Liaison Manager
HandCraft Linen Services

Michael Potack
Chairman, Unitex

Robert Raphael
Co-President
Service Linen Supply Inc.

Liz Remillong
Vice President, Strategic Alliance
Crothall Healthcare

Douglas Waldman
President, Superior Linen Service

Charles Rossmiller
Director Laundry Programs
Textile Sales
Medline Industries, Inc.

Thomas Smith
Director, Safety & Training
Foussard Montague Associates, Inc.

 

An Evening of Smart Innovation that Showcased New Standards for Fashion (c) Rodin Banica
Textile installation by Cécile Feilchenfeldt
29.03.2018

An Evening of Smart Innovation that Showcased New Standards for Fashion

On Thursday, March 22nd, C.L.A.S.S., with support from the Council of Fashion  Designers  of  America  (CFDA),  hosted  an  intimate  gathering  of  fashion’s  industry  leaders, educators, designers and members of the press to celebrate An Evening of Smart Innovation.

The event was beautifully orchestrated by Ginger Design, an exceptional team of Italian creatives, filmmakers, food and  textile  designers  as  a  way  to  create  a  unique  immersive  experience  telling  the  story  of  C.L.A.S.S.’ visionary journey. Thus, providing guests with an awareness and chance to embrace knowledge related to four key areas that set new standards for fashion vital to C.L.A.S.S.’ business philosophy:  Heritage, Smart Innovation, Circular Economy and Design Responsibility.

Imagination and responsibility at the forefront of the event, guests entered to view a film by Cristina Picchi that  represented harmony  between the various  phases  of  the  textile  process  and  the  cycles  of  natural elements.

On Thursday, March 22nd, C.L.A.S.S., with support from the Council of Fashion  Designers  of  America  (CFDA),  hosted  an  intimate  gathering  of  fashion’s  industry  leaders, educators, designers and members of the press to celebrate An Evening of Smart Innovation.

The event was beautifully orchestrated by Ginger Design, an exceptional team of Italian creatives, filmmakers, food and  textile  designers  as  a  way  to  create  a  unique  immersive  experience  telling  the  story  of  C.L.A.S.S.’ visionary journey. Thus, providing guests with an awareness and chance to embrace knowledge related to four key areas that set new standards for fashion vital to C.L.A.S.S.’ business philosophy:  Heritage, Smart Innovation, Circular Economy and Design Responsibility.

Imagination and responsibility at the forefront of the event, guests entered to view a film by Cristina Picchi that  represented harmony  between the various  phases  of  the  textile  process  and  the  cycles  of  natural elements.

The piece de resistance was a three-dimensional installation designed by Cécile Feilchenfeldt that  contained  exquisite  knits  allowing  guests  to  walk  through  the area to  inspire creativity and explore the  limitless possibilities using innovative  smart  materials.  So,  with  responsible  design  in  mind  the guests  were  able  to  touch  and  feel  the  luxurious  smart  textiles supported  by  sustainable  credentials  from  Bacx  by  Centro  Seta, Bemberg™ by Asahi Kasei, ECOTEC® by Marchi & Fildi, Organic Cotton  Colours,  Re.VerSo™,  ROICA™  by  Asahi  Kasei,  TINTEX Textiles, and Zignone. The new generation of beautiful cottons, rich silks, lush wools and opulent cashmeres showcased throughout the C.L.A.S.S. event currently available to the market.

Giusy Bettoni and the C.L.A.S.S. team from Milan and New  York, as well as several of their partner representatives from around the globe  were  on  hand  to  engage  designers  and  educators  and answer   questions   related   to   smart   materials   and   processes. Designers  and  educators  were  pleased  to  learn  about  the  new C.L.A.S.S. e-commerce site dedicated to emerging designers and fashion  startups,  as  well as  new  details  regarding  C.L.A.S.S. Education  as  a  university   learning  resource,  co-founded   with James  Mendolia,  FIT  Professor,  MFA  Fashion  Design  and  FIT Sustainability Council Member.

Attendees included: Julien Labat, president of Edun and Marilyn Balkaransingh Director of  Fabric  R&D of  Edun, J.R.  Campbell  and  Young  Kim  Thanos of Kent State’s School of Design and Merchandising, Lisa Smilor and Stephanie  Soto of  CFDA,  Nomi  Dale  Kleinman of  FIT,  Susan Easton, founder   of   From   the   Road,   Nicole   Fischelis,   Heron Preston, Luciana Scrutchen of Parsons School of Design and Kay Unger, chair of the Board of Governors for Parsons, among others.
 

15.03.2018

An Evening of Smart Innovation that Sets New Standards for Fashion

On Thursday, March 22nd, C.L.A.S.S., with support from the Council of Fashion Designers of America (CFDA), will invite fashion’s industry leaders, designers and members of the press to celebrate An Evening of Smart Innovation.  An exceptional team of artists, filmmakers, food and textile designers have created an immersive experience that will engage the guests’ senses highlighting that smart innovation is the new standard for fashion. The experience will examine the four key areas that are vital to C.L.A.S.S.’s business philosophy: Heritage - Smart Innovation - Circular Economy - Design Responsibility. The commitment to those principles and to forward thinking led to C.L.A.S.S. having been nominated as one of the European Business Awards 2017/2018 Ones to Watch for exceptional growth, significant innovation along with an ethical approach to business.

On Thursday, March 22nd, C.L.A.S.S., with support from the Council of Fashion Designers of America (CFDA), will invite fashion’s industry leaders, designers and members of the press to celebrate An Evening of Smart Innovation.  An exceptional team of artists, filmmakers, food and textile designers have created an immersive experience that will engage the guests’ senses highlighting that smart innovation is the new standard for fashion. The experience will examine the four key areas that are vital to C.L.A.S.S.’s business philosophy: Heritage - Smart Innovation - Circular Economy - Design Responsibility. The commitment to those principles and to forward thinking led to C.L.A.S.S. having been nominated as one of the European Business Awards 2017/2018 Ones to Watch for exceptional growth, significant innovation along with an ethical approach to business.

The March 22nd date is a deliberate choice as it marks International Water Day and serves as a way to advocate for sustainable water management, a key issue in textile manufacturing. Many of C.L.A.S.S.’s partners, such as ECOTEC® by Marchi&Fildi, Bemberg™ and ROICA™ by Asahi Kasei and TINTEX Textiles use technological breakthroughs to offer fashion materials that provide significant reductions in water during the manufacturing process, an important step toward responsible future fashion systems.

“In touting significant reductions in water, energy usage and CO2 emissions, C.L.A.S.S.’s  message has always been one of consistency but now with today’s customers becoming increasingly environmentally mindful, the timing has never been better to bring awareness to the ways that responsible sustainability can be incorporated, in an authentic way, into a fashion or lifestyle brand increasing the bottom line without compromising design integrity,” said C.L.A.S.S. founder Giusy Bettoni.

The future is already here; guests can see and feel materials during the event that showcase technological breakthroughs currently available. While C.L.A.S.S. works with leading brands that practice responsible design, the next step is to expand their reach and set a new level of standards that benefit the entire industry. To that end, they have identified C.L.A.S.S. Education, their new division, as an essential learning resource to support fashion schools. The new division was co-founded with James Mendolia, professor in the MFA Fashion Design program at Fashion Institute of Technology. C.L.A.S.S. will also launch C.L.A.S.S. e-commerce platform, which will sell partner materials to support emerging designers and fashion start-ups.

Thank you to all of our partners for making this event and the last ten years possible: Bacx by Centro Seta, Bemberg™ by Asahi Kasei, ECOTEC® by Marchi & Fildi, Organic Cotton Colours, Re.VerSo™, ROICA™ by Asahi Kasei, TINTEX Textiles, Zignone.

More information:
Fashion C.L.A.S.S.
Source:

C.L.A.S.S.