From the Sector

• The “Newcomer Award” will still be presented at the 8th Convention & Fair for Hightech Textiles
• Chemnitz organisers considering forward-looking forums using the “mtex+” brand

The 8th mtex+ Convention & Fair for Hightech Textiles, which was scheduled to be held on 9-10 June 2020, will not take place because of the corona crisis. “We’ve made this decision following in-depth consultations with the members of the advisory board who are working in the textile sector; they were also opposed to moving the date to the autumn because of the unforeseeable consequences arising from the crisis,” says  André Rehn, Head of Sales for Trade Fairs & Congresses at the organiser, C³ GmbH, Chemnitz.

“Cancelling the event is a particularly severe blow for us, as the “mtex+” was supposed to be held with a modernised concept and a very attractive programme at our new Carlowitz Congresscenter at the heart of Chemnitz for the first time. The considerable economic loss associated with this is naturally painful for us too. However, we will be presenting our “mtex+” “Newcomer Award” to the prize-winners at the next possible, suitable opportunity. 15 students and graduates from all over Germany have taken part in the young people’s competition with creative ideas for recycling, upcycling and downcycling textiles. We’re also now considering special events, which could operate using our well-known “mtex+” brand in future. Sustainability in the textile value-added chain as well as health and protective textiles made by the domestic market are obvious, forward-looking topics in this field.”

Focus on Sustainability and Climate Change

Passion for Cotton: The 35th International Cotton Conference Bremen starts on 25 March in the Hanseatic city’s historic Town Hall. But before subject-specific questions are discussed in depth in the individual sessions, the concise and inspiring keynotes by leading business experts from science and industry will draw attention to the current trends and challenges in the industry at the start of the conference. A large part of the presentations is shaped by the current discussion on environmental and sustainability issues and the resulting consequences for the global economy.

Climate Change and Sustainability

“Climate change - a storm in a teacup?” asks Kai Hughes, Executive Director of the International Cotton Advisory Committee, Washington D.C., USA, in a provocative speech. The aim of his presentation is to work out the challenges of climate change especially for agriculture and cotton production. This should form the basis for later discussion on concrete approaches and solutions within the cotton community.

With his lecture “The HUGO BOSS sustainability programme ... and what our customer has to do with it” Andreas Streubig, Director of Global Sustainability at Hugo Boss AG, Metzingen, Germany, rolls up the textile value chain from a different angle, starting at the consumer level. As a representative of a premium brand for women's and men's clothing, Streubig discusses sustainability as a strategic element of the corporate strategy and provides information on how elements of the strategy are being implemented at Hugo Boss.

Rüdiger Senft, Head of Sustainability at Commerzbank, Frankfurt am Main, Germany, looks at the changing role of banks in financing the cotton market. In addition to a general introduction to the topic of sustainability and banking regulation, Senft's presentation deals with the financing of the cotton trade from a social and ecological point of view.
The opening session on 25 March is hosted by Bill Ballenden, founder and owner of Dragontree, Swindon, UK, an online auction platform for the cotton trade. As a former cotton manager for Louis Dreyfus in Europe and Asia, Bill Ballenden has many years of experience in the industry.

Cross-Cutting Issues: Digitalisation, Gender, Value Chains

The subsequent session in the conference programme with the headline “A Wider View” is devoted to currently defining trends and important cross-cutting issues in the industry. This goes far beyond classic cotton themes.

A lecture by Mark Messura, Senior Vice President, Global Supply Chain Marketing for Cotton Incorporated, Cary, North Carolina, deals with the role of cotton in an increasingly digitally controlled supply chain. Significant keywords here are faster delivery times, vertical integration, transparency and traceability.

The presentation by Roger Gilmartin, Managing Director of Tri-Blend Consulting, Charlotte, USA, entitled “The secret recipe for timely, cost-optimised and high-quality cotton clothing” promises exciting and enlightening insights. Tri-Blend Consulting conducts studies on the performance of different cotton varieties during the entire consumption process to the finished yarn and evaluates them from an economic point of view.

Amy Jackson, from the Better Cotton Initiative, London, UK, presents ICA Liverpool's “Women in Cotton” initiative. With this commitment, the initiative aims to increase the influence of women in the cotton industry and give them a stronger voice, for example by building networks in cooperation.

Navdeep Singh Sodhi, International Strategic Management Consultant at the Gherzi Textile Organisation, Switzerland, gives an insight into the current development of the value chain for cotton, textiles and clothing in Africa. Looking ahead to the coming decades, also in view of population growth, Africa is seen as having a high potential for building economic structures to improve income and prosperity.

Thomas Schneider, Professor at the University of Applied Sciences in Berlin and active in the field of production planning and control, textile materials and materials testing will host the session. A leading light in his field, Thomas Schneider has more than 30 years of experience in scientific and application-oriented research in the textile and fibre sector, including at the Fibre Institute Bremen e.V.

“Being a pioneer in sustainability gave us the advantage to be the first to reach the end consumer’s wardrobe.” Says Shinohe Hiroaki, ROICA™ Chief Marketing Officer based in Germany. “In Paris, through partners innovations, we will present some of our ultimate achievements in terms of responsible innovation.”

ROICA™ partners using ROICA Eco-Smart™ family in Paris show are:

• Dresdner (DE) (booth D30)
• Feinjersey (AU) (booth C11)
• Iluna Group S.p.A. (IT) (booth D43)
• Innova Fabrics S.R.L. (IT) (booth B08)
• Lauma Fabrics (LV) (booth A15)
• Maglificio Alto Milanese (IT) (booth A11)
• Maglificio Ripa (IT) (booth C8)
• Piave Maitex S.R.L. (IT) (booth C14)
• TAUBERT Textil GMBH (DE) (booth B11)
• Tessitura Colombo Antonio S.R.L. (IT) (booth A43)
• MG2 CREATION (FR) (booth A17)
• TVB (DE) (booth B11)

ROICA™ smart innovations are The Sustainable fil rouge at Performance Days, the influential fair for innovations, trends, safety & durability and sourcing of fabrics and accessories in functional sportswear & athleisure. Leading fabrics manufacturers and nearly all the well-known sportswear and active clothing brands have chosen the company’s premium stretch fibers of the ROICA Eco-Smart™ family to create their ultimate collections combining comfort, movement and responsibility.

“We are excited to see such a brilliant response from both manufacturers and brands which have decided to use our premium stretch sustainable fibers. We are excited because it really shows that sustainability is not only a marketing hype, but more and more literally interwoven into garments.” Says Shinohe Hiroaki, ROICA™ Chief Marketing Officer based in Germany.

The company’s partners empowering their ultimate collections with ROICA™ are CIFRA S.p.A. (IT), Maglificio Ripa S.p.A. (IT), M.I.T.I. S.p.A. (IT), Payen group ESF (FR), Piave Maitex S.r.l. (IT), SITIP S.p.A. (IT), Sofileta S.A.S (FR), Sportswear Argentona S.A. (ES), TINTEX Textiles S.A. (PT) and TVB GmbH (DE).

Experts from the tire industry will meet again in 2020 for the annual Tire Technology Expo in Hanover, Germany. Saurer Twisting Solutions is looking forward to welcoming customers and visitors at Booth 4006 in Hall 6 from 25 to 27 February 2020 and to presenting the innovative CableCorder CC5. With a complete package of numerous innovations, the CC5 once again demonstrates its technological leadership and the associated customer benefits.

The Saurer CableCorder for the production of high-quality tire cord is a permanent fixture in the tire industry. The fifth generation of the CableCorder will appeal to customers with its numerous innovations. It provides Saurer's customers with decisive competitive advantages: they benefit from lower energy consumption, a smart spindle concept, modern quality monitoring, improved ergonomics, flexible automation solutions and the integration of the CableCorder into Senses, the Saurer mill management system.

• Bangladesh’s biggest denim expo takes place 5-6 November
• The show runs concurrently with the Sustainable Apparel Forum Bangladesh
• From 4-6 November, Bangladesh becomes the perfect meeting point for stakeholders in the global apparel industry

DHAKA - Responsibility is the theme of the 11th Bangladesh Denim Expo which takes place on 5th and 6th November at International Convention City in Bashundhara, Dhaka. The event, now firmly established as one of the world’s leading denim trade shows, runs alongside the Bangladesh Sustainable Apparel Forum.

Bangladesh Denim Expo

Around 100 exhibitors from 11 countries, including host Bangladesh, will participate in this year’s denim expo. Other participating countries are china, Japan, Italy, India, Singapore, Brazil, Spain, Pakistan, Turkey and Germany.

H&M Group is collaborating with Bangladesh Denim Expo for the forthcoming 11th edition of the event and a number of guest speakers will be present from the company, including Pierre Borjesson, head of sustainability, global production. Other guest speakers include Andrew Olah, the founder of Kingpins Denim show, Alice Tonello, R&D director with the Tonello Group, world renowned denim designer, Piero Turk and Jordi Juani, Asia regional director with Jeanologia.

Through a series of product displays, presentations, seminar sessions & panel discussions, the Expo will encourage healthy debate and interaction among exhibitors and visitors to champion a more responsible denim industry. One of these, of course, is sustainability and within this sits the issue of responsibility – an overriding theme of this year’s event. Denim manufacture faces huge challenges with regards its social and environmental responsibility, with production techniques having potentially far-reaching ramifications for the environment as well as people involved in the production process.

However, the industry and its supply chain are making impressive progress on these issues with Bangladesh – now the world’s largest producer of denim – leading the way in terms of addressing some of the sustainability challenges relating to denim production, including excessive use of water and chemicals. Mostafiz Uddin is the organiser of Bangladesh Denim Expo. Uddin has watched with interest the evolution of the denim industry, with each Expo marking continued and gradual progress being made by the more progressive players in the industry.

Uddin says: “The way that business and product development is conducted can have far reaching consequences on the environment, on the people that make the product and the product’s end use & life-span. “It is the duty of all stakeholders in the apparel industry to acknowledge this responsibility and to analyse our business practices, for the benefit of all.” Emphasising the theme of responsibility within Denim Expo is the fact that revenues from the expo support the running and presentation of the Sustainable Apparel Forum.

Sustainable Apparel Forum

The Sustainable Apparel Forum (SAF) is the biggest annual sustainable apparel event in Bangladesh. Bangladesh Apparel Exchange (BAE) along with Bangladesh Garment Manufacturers and Exporters Association (BGMEA) as co-organiser will jointly carry out the 2nd edition of the SAF on 5th Nov 2019.

This is the second edition of the Sustainable Apparel Forum, with the first-ever forum held in 2017 in Dhaka. The objective of this year’s forum is accelerating the momentum of sustainability in Bangladesh apparel industry.

The forum will see more than 50 speakers gathered from Bangladesh and overseas sharing expert opinions across five panel discussions covering current issues in the country’s apparel industry. These include human resources, transparency in business, water conservation, purchasing practices, sustainable chemical management, waste management, circular economy in textiles and climate change to name a few.

Additionally, the conference will host several knowledge building technical presentations from renowned organisations which will cover different issues relating to sustainability, including waste management, protection of the environment and better working conditions.

Speakers at the show include Md. Shahriar Alam, MP, Honourable State Minister, Ministry of Foreign Affairs, Bangladesh, H. E. Benoit Préfonatine High Commissioner, High Commission of Canada, Bangladesh, and Dr. Rubana Huq President, Bangladesh Garment Manufacturers’ and Exporters’ Association, Sheikh Fazle Fahim, President, Federation of Bangladesh Chamber of Commerce & Industries, Pierre Börjesson, Head of Sustainability – Global Production, H&M Group, Tuomo Poutiainen, Country Director, International Labor Organization, Peter McCallister, Executive Director, Ethical Trading Initiative and H.E. Winnie Estrup Petersen Ambassador, Embassy of Denmark, Bangladesh.

Prior to this year’s conference, the Embassy of the Kingdom of the Netherlands in Bangladesh and the Sweden Embassy in Bangladesh will also co-host two roundtable discussion in collaboration with BAE and in association with BGMEA on 4 November, 2019, while H&M, Better Work Bangladesh and C&A Foundation are partners in the event.
The conference will be followed by showcasing different innovative, sustainable & best work practices in RMG manufacturing factories in Bangladesh. Following the discussions, a series of recommendations will be made, and a Sustainability Roadmap for the Bangladesh apparel industry will be formulated.

This year’s SAF promises to be the biggest yet. Added by Mr Mostafiz Uddin in the recent press briefing for the event: “The title for this year’s Sustainable Apparel Forum is enabling sustainability through policy and leadership. The time for talking on sustainability issues is over. It is now time for actions. That’s why the focus of this year’s show is on practical, pragmatic actions the textile industry can adopt to improve its environmental footprint.”

• Comprehensive 3D printing expertise in the automotive, aerospace, consumer goods and medical application sectors
• Hands-on application presentation with a leading RV and trailer manufacturer
• Content-rich Live Talks with industry-leading business partners
• Live demonstration of pigmented plastic filaments with BASF Colors & Effects

BASF 3D Printing Solutions (B3DPS) exhibited for the second time at K 2019 in Düsseldorf, Germany. At the world’s biggest trade show for plastics and rubber industry, B3DPS welcomed visitors from October 16 through 23 at the BASF SE stand C21/D21 in Hall 5 and presented its extensive portfolio of 3D printing materials and service solutions aiming at enabling industrial additive manufacturing at scale. What’s more, the company’s 3D printing experts did offer insights into the latest technological innovations and application developments in the “competencies” section.

Customized 3D printing highly attractive to RV and trailer market
The Concept Caravan at the BASF stand gave visitors hands-on experience of the impressive spectrum of applications offered by B3DPS. Alongside complex samples of printed modular construction elements, over one hundred individual parts have been 3D-printed using advanced photopolymer, filament and powder-based ready-to-print material formulations. The RV and trailer market is exceptionally attractive as it can greatly benefit from unique advantages offered by additive-based manufacturing, namely the high customizability of parts with complex geometries as well as the rapid availability of production parts without incurring tool costs. The very diverse material characteristics of the construction elements meet the production requirements for both vehicle exteriors and interior fittings. In addition, the final coating of manufactured parts plays a decisive role in many application areas, and this is also covered by the comprehensive BASF technology portfolio.

Keynote by Wilson Zhu (COO at Li & Fung) on digitizing global supply chains and interview with Jason Prescott (CEO JP Communications) on ATSG's concept, goals and program

From 11 to 13 September, the textile trade fair Apparel Textile Sourcing Germany (ATSG) will take place for the first time in Berlin. 200 manufacturers from all over the world will present the latest developments and trends in the global apparel and textile market. Manufacturers for the mass market as well as producers supplying brands or retailers with smaller retail ranges will present themselves. A large number of
international experts from the textile industry will be giving lectures and discussing the future of the market. Admission is free.

The ATSG is organized by JP Communications Inc. (JPC). With trade fairs under the umbrella brand ATS (Apparel Textile Sourcing), the company is already a well-known player in the North American textile and clothing industry. JP Communications operates the most extensive network of B2B sourcing platforms in the USA. TopTenWholesale.com and Manufacturer.com are used by millions of international members to find suitable wholesalers and manufacturers. The ATSG is supported by a large number of local and European organisations from industry, trade and commerce as well as international consulates.

First showing of game-changing technology at a European tradeshow includes the recently launched Kornit Atlas, Kornit Avalanche Poly Pro and Kornit Presto
Kornit Digital (Nasdaq: KRNT), a worldwide market leader in digital textile printing technology, has announced details of its corporate presence at Fespa 2019 which will take place in Munich, Germany, May 14-17.

Kornit’s exhibit will focus on the game-changing technology that was unveiled in the beginning of the year and will now be on display for the first time in a tradeshow in Europe: the Kornit Atlas and the Kornit Avalanche Poly Pro. The presence will be complemented by a Kornit Storm HD6, a direct-to-fabric sample area featuring prints from Kornit’s upcoming Presto system and an installation of Colorgate’s Textile Production Server for Kornit.

The Kornit Atlas is a heavy-duty system created for super-industrial garment decoration businesses. It is designed to deliver a typical annual production capacity of up to 350,000 impressions, optimizing production efficiency and cost of ownership. The Kornit Atlas is aimed at highly productive garment decorators, mid to large size screen printers and innovative businesses looking to combine state-of-the art technology with lowest cost of ownership, making it easier than ever to address the requirements of leading and mid-sized brands, as well as new generation digital brands. The Kornit Atlas uses water-based Kornit NeoPigmentTM Eco-Rapid Inks which are eco-friendly, GOTS approved and OEKOTX certified, and serve as the main driver of the retail quality prints.

FONG’S EUROPE, based in Schwäbisch Hall, Germany, will celebrate the 100th anniversary of its flagship THEN brand for advanced dyeing technology with a special reception for customers and agents at ITMA 2019 in Barcelona.

The company, which has been a member of the CHTC FONG’S group since 2004, has its origins in the German city of Chemnitz, where back in 1919 Rudolf Then founded a barrel-making business which soon branched out into piece dyeing machines.

The company’s reputation for innovation began early, with the introduction of ceramic linings for dye baths, which were then made of wood, in order to avoid staining and allow easy cleaning. At the end of the 1920s, Rudolf Then was also quick to recognise the acid-resistant advantages of stainless steel for dyeing vessels.

Relocating to West Germany after World War 2, Rudolf Then ran a number of businesses in Schwäbisch Hall, eventually founding THEN in 1955 with partner Karl Kurz, who later took over the business specialising in dye vats and other textile equipment.

Throughout the 1960s and 70s, the company continued to further improve its technologies, but it was the introduction of the first THEN AIRFLOW system at ITMA 1983 in Milan which significantly boosted the company’s fortunes, representing a milestone in the development of dyeing machines.

Prior to this, the dyeing of just one kilo of fabric required around 150 litres of water and THEN’s AIRFLOW system, invented by engineer Wilhelm Christ and colleagues, drastically reduced the requirement to between just 35-40 litres. Instead of the traditional dye liquor used for hydraulic fabric transport it efficiently distributed much smaller amounts of dye liquor via aerosol. This technology has subsequently been further developed in successive machine models and has made an enormous impact on sustainable dyeing operations.

Now, as FONG’S EUROPE, the company continues to innovate, and at ITMA 2019 is showcasing the THEN SMARTFLOW TSF hydraulic high temperature dyeing machine, designed to achieve the lowest possible energy and water consumption rates available on the market for jet dyeing.

The company has a number of patents pending on the innovative new features of this machine, including the SMARTFLOW’s fabric transport design. This is based on a smart, winchless fabric transport system which eliminates the need for a loading rope, and a circular plaiter with programmable rotation speeds which provides full filling of the drop zone.

Its newly-developed nozzles and reel-less transport, in combination with smart controlled circular plaiting and variable chamber adjustment, provide even fabric treatment without entanglements and the highest loading capacity with the lowest kier volume

“Further developments, including the new THEN AIRFLOW PLUS system with a round design are in the development pipeline and will once again result in further reductions in power consumption without sacrificing performance,” says FONG’s Europe Sales Director Richard Fander. “Similar innovations are being made to our hydraulic long shape machine, the THEN SUPRATEC LTM. The ability to transport fabrics with reduced tension and without the need for a transport winch which is being introduced on all of our recent machines will allow new fabrics to be created and further increase the efficiency of textile finishing.

Fong’s Europe will be at stand D101 in Hall 2 at ITMA 2019.