From the Sector

Reset
169 results
The Oerlikon Nonwoven meltblown technology (c) Oerlikon
The Oerlikon Nonwoven meltblown technology
14.05.2020

Oerlikon Nonwoven deliveringmeltblown technology to FleeceforEurope

Protective masks for Europe
With FleeceforEurope and Lindenpartner, Düsseldorf-based Kloepfel Group purchasing consultancy and Berlin-based industrial consultancy Bechinger & Heymann Holding plan to manufacture and distribute up to 50 million protection class FFP1 through FFP3 respiratory masks a month exclusively for the European market from the beginning of fall. And the primary focus will be on quality.
With protective masks – including those used in operating rooms – this quality is provided above all by  virus-absorbing nonwovens. And these will be manufactured by ‘FleeceforEurope’ using an Oerlikon Nonwoven meltblown system.
But masks effectively protecting against infections can only be guaranteed with the right quality. A crucial factor in this is the inside of the mask. Because the nonwoven used in protection class FFP1 through FFP3 respiratory masks plays a decisive role.

Protective masks for Europe
With FleeceforEurope and Lindenpartner, Düsseldorf-based Kloepfel Group purchasing consultancy and Berlin-based industrial consultancy Bechinger & Heymann Holding plan to manufacture and distribute up to 50 million protection class FFP1 through FFP3 respiratory masks a month exclusively for the European market from the beginning of fall. And the primary focus will be on quality.
With protective masks – including those used in operating rooms – this quality is provided above all by  virus-absorbing nonwovens. And these will be manufactured by ‘FleeceforEurope’ using an Oerlikon Nonwoven meltblown system.
But masks effectively protecting against infections can only be guaranteed with the right quality. A crucial factor in this is the inside of the mask. Because the nonwoven used in protection class FFP1 through FFP3 respiratory masks plays a decisive role.
Here, the meltblown technology from Oerlikon Nonwoven will be deployed. In a special, patented process, the fibers laid into a nonwoven fabric during manufacture are subsequently electrostatically-charged, before the material is further processed downstream.

European market for protective masks with a promising future
Those responsible at Oerlikon Nonwoven and FleeceforEurope, which will primarily focus on producing high-end nonwovens, and Lindenpartner, which will manufacture and distribute the protective masks, are certain of one thing: the market for protective masks has a very promising long-term future in Europe.
What has been commonplace in Asia for many years now will also become normal in Europe. People will be increasingly wearing face masks when venturing out, in order to better protect themselves against health risks such as the current pandemic and also against increasing environmental pollution in the form of  fine particles and exhaust fumes in the future. A

Medical face masks from a vending machine
Mask producer Lindenpartner has already secured supplies of nonwovens and will be producing face masks for the European healthcare sector over the coming weeks. To fight the coronavirus pandemic, Lindenpartner is planning to install 100 self-service face mask vending machines in Germany over the next four weeks, positioning them in publicly-accessible places such as shopping centers and airports, for example.

Source:

Marketing, Corporate Communications & Public Affairs

Start of 3-years Interreg cross-border project AACOMA  is kicked-off (c) AMAC GmbH
AMAC-Standortkarte
13.05.2020

Start of 3-years Interreg cross-border project AACOMA is kicked-off

  • AACOMA - Accelerate advanced composite manufacturing
  • EMR Region Belgium, the Netherlands & Germany area hot spot for the future of lightweight materials and technologies

The Euregio Meuse-Rhine provides a huge potential with its many highly innovative, leading companies and especially SMEs which are active in the area of advanced material manufacturing in many industrial sectors, such as Automotive, Aerospace, Electronics, Building and Infrastructure, etc. The advanced material sector is growing, with a consolidated offer, ranging from raw material producers over technology development to production, research and development as well as industrial OEMs.

Interreg Euregio Meuse-Rhine invests EUR 96 million from the European Regional Development Fund (ERDF) in the period 2014-2020. Through the investments in cross-border projects, the European Union invests in the economic development, innovation, territorial development and social inclusion and education of this region.

Project

  • AACOMA - Accelerate advanced composite manufacturing
  • EMR Region Belgium, the Netherlands & Germany area hot spot for the future of lightweight materials and technologies

The Euregio Meuse-Rhine provides a huge potential with its many highly innovative, leading companies and especially SMEs which are active in the area of advanced material manufacturing in many industrial sectors, such as Automotive, Aerospace, Electronics, Building and Infrastructure, etc. The advanced material sector is growing, with a consolidated offer, ranging from raw material producers over technology development to production, research and development as well as industrial OEMs.

Interreg Euregio Meuse-Rhine invests EUR 96 million from the European Regional Development Fund (ERDF) in the period 2014-2020. Through the investments in cross-border projects, the European Union invests in the economic development, innovation, territorial development and social inclusion and education of this region.

Project

The Euregio Meuse-Rhine is a potential hot-spot for the further development of advanced material and process technologies. Technical Centers and Institutes around Aachen/Germany, Liège/Belgium and Eindhoven/The Netherlands were awarded with this new project AACOMA.

Innovative material design and advanced manufacturing provide large opportunities for SMEs. The AACOMA project kick-off took place in Aachen at the Campus of the RWTH University of technology in 1 Q 2020. The aim of the project, which is running for 3 years until 2023 with a budget of €3 Mio, is to connect SMEs with innovation hot-spots like institutes and technical centers.
Seven partners from all three regions will carry the project out: Centexbel is the project leader and gets support by University of Liège, Sirris and Flanders Make from Belgium, as well as Fontys University of Applied Science and AMIBM of Maastricht University in the Netherlands and AMAC in Germany.

Statements

Bernard Paquet, Project Coordinator from Centexbel/ Belgium stated:
“Centexbel, with a strong experience in textile and composites, will identify with its Interreg partners and an advisory board of international experts several demonstrators which will enable an accelerated advanced manufacturing of composite parts. This could include new materials and intermediates, high performance additives, bio-based products and new composites by additive manufacturing”.

Michael Effing, Managing Director of AMAC/ Germany said:
“The major goal of the project is to connect around 200 innovative SMEs with each other and establish the links to the world-class institutes in the EMR region. We will facilitate 6 roadshow events, addressing key topics like automated manufacturing, additive manufacturing or bio-based material systems combined with match making and training events. The first roadshow will be held on September 24, 2020 at the Aachen Campus of the RWTH University of Technology.”

Prof. Gunnar Seide from the AMIBM/The Netherlands continued:  
“Our AMIBM offers already an international master program on bio-based materials. The AACOMA project will be an important element for transborder research and will identify new players in the value chain coming from the EMR region. Innovative companies find markets for their new bio-based building blocks, chemicals and polymers. Their success stories and upcoming technological breakthroughs are needed for a sustainable future.”

 

02.05.2020

NCTO: Buy American Policy for Personal Protective Equipment

National Council of Textile Organizations (NCTO) President and CEO Kim Glas issued a statement, urging the government to institute Buy American policy changes to help bolster U.S. manufacturers producing personal protective equipment (PPE) for frontline workers battling the COVID-19 pandemic.

“If the government is sincere about reconstituting a U.S. production chain for medical personal protective equipment (PPE) to resolve the drastic shortages we are experiencing during the current pandemic, it is going to have to make key policy changes to help incentivize domestic production. A strong Buy American mandate for these vital healthcare materials needs to be instituted for all federal agencies, coupled with other reasonable production incentives, to help ensure a strong U.S.  manufacturing base for these essential products.

National Council of Textile Organizations (NCTO) President and CEO Kim Glas issued a statement, urging the government to institute Buy American policy changes to help bolster U.S. manufacturers producing personal protective equipment (PPE) for frontline workers battling the COVID-19 pandemic.

“If the government is sincere about reconstituting a U.S. production chain for medical personal protective equipment (PPE) to resolve the drastic shortages we are experiencing during the current pandemic, it is going to have to make key policy changes to help incentivize domestic production. A strong Buy American mandate for these vital healthcare materials needs to be instituted for all federal agencies, coupled with other reasonable production incentives, to help ensure a strong U.S.  manufacturing base for these essential products.

Our government already has an existing example of such a mandate that serves as an excellent model. The U.S. Department of Defense operates under a fiber-to-finished product Buy American rule for military textiles. This rule ensures that the vital textile materials our U.S. warfighters depend upon, come from a secure domestic production chain that cannot be severed during a military emergency by offshore entities.

There is a bipartisan call for action as members of Congress on both sides of the aisle have begun to acknowledge the need for these types of reasonable and essential policy changes.

Anything short of fully instituting domestic purchase requirements through Executive Order and other legislative initiatives will ensure that PPE production through U.S. supply chains that have been created overnight don’t evaporate as soon as this crisis is over.  

In the midst of the crisis, our failure to confront this challenge will allow for a repeat of the sins of the past that allowed sourcing agents to offshore the entire production of medical PPE in search of lucrative profits. While chasing the lowest cost import may have seemed cost effective at the time, these past few months have demonstrated that we paid a deadly price through this approach by jeopardizing the very lives of frontline medical personnel that are fighting the pandemic.   

This is a national security issue. It’s also a vital healthcare issue and it is decision time for U.S. policymakers. If our country is to be prepared for future deadly pandemics such as the one it is now facing, reasonable policy changes need to be implemented to ensure that we strengthen our domestic supply chain to address America’s security, safety and healthcare requirements.”


NCTO is a Washington, DC-based trade association that represents domestic textile manufacturers, including artificial and synthetic filament and fiber producers. 

Source:

NCTO

ndré Rehn, Head of Sales for Trade Fairs & Congresses at C³ GmbH (c) C³ GmbH
ndré Rehn, Head of Sales for Trade Fairs & Congresses at C³ GmbH
30.04.2020

2020 “mtex+” cancelled because of the corona crisis

  • The “Newcomer Award” will still be presented at the 8th Convention & Fair for Hightech Textiles
  • Chemnitz organisers considering forward-looking forums using the “mtex+” brand

The 8th mtex+ Convention & Fair for Hightech Textiles, which was scheduled to be held on 9-10 June 2020, will not take place because of the corona crisis. “We’ve made this decision following in-depth consultations with the members of the advisory board who are working in the textile sector; they were also opposed to moving the date to the autumn because of the unforeseeable consequences arising from the crisis,” says  André Rehn, Head of Sales for Trade Fairs & Congresses at the organiser, C³ GmbH, Chemnitz.

  • The “Newcomer Award” will still be presented at the 8th Convention & Fair for Hightech Textiles
  • Chemnitz organisers considering forward-looking forums using the “mtex+” brand

The 8th mtex+ Convention & Fair for Hightech Textiles, which was scheduled to be held on 9-10 June 2020, will not take place because of the corona crisis. “We’ve made this decision following in-depth consultations with the members of the advisory board who are working in the textile sector; they were also opposed to moving the date to the autumn because of the unforeseeable consequences arising from the crisis,” says  André Rehn, Head of Sales for Trade Fairs & Congresses at the organiser, C³ GmbH, Chemnitz.

“Cancelling the event is a particularly severe blow for us, as the “mtex+” was supposed to be held with a modernised concept and a very attractive programme at our new Carlowitz Congresscenter at the heart of Chemnitz for the first time. The considerable economic loss associated with this is naturally painful for us too. However, we will be presenting our “mtex+” “Newcomer Award” to the prize-winners at the next possible, suitable opportunity. 15 students and graduates from all over Germany have taken part in the young people’s competition with creative ideas for recycling, upcycling and downcycling textiles. We’re also now considering special events, which could operate using our well-known “mtex+” brand in future. Sustainability in the textile value-added chain as well as health and protective textiles made by the domestic market are obvious, forward-looking topics in this field.”

More information:
mtex+
Source:

C³ GmbH

24.04.2020

Lenzing AG and Palmers Textil AG found Hygiene Austria LP GmbH

Center of competence for hygiene established in Wiener Neudorf to support Austria and the EU in the Covid-19 crisis for the industrial production of high-quality protective masks with a monthly capacity of 12 million pieces.

Lenzing AG and Palmers Textil AG found “Hygiene Austria LP GmbH”, in which Lenzing AG holds 50.1% and Palmers Textil AG 49.9%. The newly founded company will start producing and selling protective masks for the domestic and European markets from May 2020.

Over the past few weeks, Lenzing AG and Palmers Textil AG have invested several million euros in a modern production infrastructure at the Wiener Neudorf location and secured the corresponding raw materials for protective masks production. In a first step, the company produces so-called mouth-nose protective masks (MNS) and surgical protective masks of class EN14683. Hygiene Austria LP GmbH plans to increase its capacities to over 25 million masks per month over the next few weeks and to expand this business geographically as well.

Center of competence for hygiene established in Wiener Neudorf to support Austria and the EU in the Covid-19 crisis for the industrial production of high-quality protective masks with a monthly capacity of 12 million pieces.

Lenzing AG and Palmers Textil AG found “Hygiene Austria LP GmbH”, in which Lenzing AG holds 50.1% and Palmers Textil AG 49.9%. The newly founded company will start producing and selling protective masks for the domestic and European markets from May 2020.

Over the past few weeks, Lenzing AG and Palmers Textil AG have invested several million euros in a modern production infrastructure at the Wiener Neudorf location and secured the corresponding raw materials for protective masks production. In a first step, the company produces so-called mouth-nose protective masks (MNS) and surgical protective masks of class EN14683. Hygiene Austria LP GmbH plans to increase its capacities to over 25 million masks per month over the next few weeks and to expand this business geographically as well.

The demand for high-quality MNS and respiratory masks for medical personnel is increasing rapidly, and there is real competition on the international market for these products. In order to sustainably secure domestic supply now and in the future and to strengthen the business location, the two companies Lenzing AG and Palmers Textil AG have now set a milestone with their own competence center for hygiene based in Austria.

Hygiene Austria LP GmbH thus makes a significant contribution to combating the Covid-19 pandemic and ensures the long-term supply of these critical goods in Austria in high quality.

Source:

Lenzing AG

Logo oerlikon
Oerlikon blickt positiv in die Zukunft
23.04.2020

Oerlikon Manmade Fibers segment looking positively towards the future during the coronavirus pandemic

Staggered in terms of timing and with varying magnitude, the global spread of coronavirus is impacting the development of the regional economies in the core markets of the Manmade Fibers segment of the Swiss Oerlikon Group.
The sales markets for manmade fiber systems and equipment have been primarily located in China, India and Turkey for many years now. Together, these markets – above all China – make up the lion’s share of the project landscape at Oerlikon Manmade Fibers. And this is paying positive dividends at the moment. Because the production facilities of the major manmade fiber manufacturers in
China have been systematically fired up again over the past few weeks, with capacity utilization increasing consistently.

Staggered in terms of timing and with varying magnitude, the global spread of coronavirus is impacting the development of the regional economies in the core markets of the Manmade Fibers segment of the Swiss Oerlikon Group.
The sales markets for manmade fiber systems and equipment have been primarily located in China, India and Turkey for many years now. Together, these markets – above all China – make up the lion’s share of the project landscape at Oerlikon Manmade Fibers. And this is paying positive dividends at the moment. Because the production facilities of the major manmade fiber manufacturers in
China have been systematically fired up again over the past few weeks, with capacity utilization increasing consistently.

Going against the flow
The Segment CEO, Georg Stausberg explains the reason: “Long before the coronavirus situation developed, the major manmade fiber manufacturers in China had decided to reverse-integrate their production chains to include petrochemicals in order to expand their portfolios with targeted investments, to reduce their dependence on a ,single product’, to optimize their costs and ultimately to acquire greater control over margins in a global volume business”.
Similar processes and decisions – albeit not on the same scale as in China – have also
been detected at the large manmade fiber manufacturers in India and Turkey. Even though businesses in India and Turkey are presently still temporarily severely impacted by the coronavirus situation, their long-term commitment cannot however be questioned, as the company-internally-agreed plans will be systematically implemented moving forward.

Long-term investments of global market players
All this has recently resulted in increased demand for spinning and texturing systems – just like those supplied by total solutions provider Oerlikon Manmade Fibers with its
Oerlikon Barmag, Oerlikon Neumag and Oerlikon Nonwoven product brands.
“The investments in petrochemical systems are based on long-term strategic considerations and are resulting – even during the coronavirus pandemic – neither in short- and medium-term economic dips, nor in changed customer behavior. (...)”, states Segment-CEO Georg Stausberg.
As a result of Oerlikon Manmade Fibers delving into the digital age years ago, the segment has experienced the intensive and short-term benefit from all the measures, in part also in its processing of customer projects.

Source:

Marketing, Corporate Communications
& Public Affairs

(c) BMW Group
21.04.2020

SGL Carbon receives contract for battery enclosure from BMW Group

  • New composite e-Mobility application
  • Multi-year substantial contract

After prototypes for a Chinese automotive manufacturer, a major order from a North American automaker, and yet another order for a European sports car manufacturer, SGL Carbon has now been nominated by BMW Group to produce a cover component for battery enclosures in series. This substantial multi-year order will include the production of an innovative glass-fiber-based cover plate for the battery housing for usage in a future plug-in hybrid model of BMW Group.

  • New composite e-Mobility application
  • Multi-year substantial contract

After prototypes for a Chinese automotive manufacturer, a major order from a North American automaker, and yet another order for a European sports car manufacturer, SGL Carbon has now been nominated by BMW Group to produce a cover component for battery enclosures in series. This substantial multi-year order will include the production of an innovative glass-fiber-based cover plate for the battery housing for usage in a future plug-in hybrid model of BMW Group.

Materials made of composites are suited for battery enclosures for different reasons: Besides their light weight, which enhances the electric vehicle’s range, fiber-reinforced plastics offer high stiffness. In addition, they meet high requirements for water and gas tightness and feature excellent fire protection properties. Composite materials can also help to achieve improved structural stiffness of the underbody, e.g. to protect against penetration, as well as an optimized thermal management. Carbon fibers are ideal for especially stressed structures or load-bearing elements, such as the underbody panels and side frames. For components subjected to less stress, such as battery box covers, glass fibers or a fiber mix may suffice.

In addition to the new application for the hybrid model battery enclosure, SGL Carbon will continue producing the usual components made of carbon-fiber-reinforced plastic for the BMW i3 and delivering materials for the Carbon Core body of the BMW 7 series, and has been nominated as the supplier for all carbon materials - fibers, textiles, stacks - for the BMW iNEXT, set to be launched in 2021.

Source:

SGL CARBON SE

Domo logo (c) Domo
Domo logo
14.03.2020

DOMO Chemicals to invest €12 million in new nylon plant in China

  • Move is in line with global growth strategy with a strong focus in the Asia Pacific region
  • Zhejiang plant will be able to produce 50,000 tons of nylon compounds annually in the longer term
  • Plant will be located in the convenient transportation port area of DuShan Pinghu city

DOMO Chemicals, a leading producer of high - quality engineering materials for a diverse range of markets, has announced plans for a new state - of - the - art plant in Zhejiang, China. The new plant will be capable of producing 50,000 tons of sustainable and innovative engineered nylon compounds each year. The company signed a new factory project through “cloud contract” with PingHu DuShan port Economic Development District on February 20, 2020. Production is expected to commence in the fourth quarter of this year.

  • Move is in line with global growth strategy with a strong focus in the Asia Pacific region
  • Zhejiang plant will be able to produce 50,000 tons of nylon compounds annually in the longer term
  • Plant will be located in the convenient transportation port area of DuShan Pinghu city

DOMO Chemicals, a leading producer of high - quality engineering materials for a diverse range of markets, has announced plans for a new state - of - the - art plant in Zhejiang, China. The new plant will be capable of producing 50,000 tons of sustainable and innovative engineered nylon compounds each year. The company signed a new factory project through “cloud contract” with PingHu DuShan port Economic Development District on February 20, 2020. Production is expected to commence in the fourth quarter of this year.

DOMO Chemicals will invest €12 million in the new plant, which will have more than 11,500 m 2-floor space. The company plans to install multiple production lines at the first stage of development, which would offer an estimated capacity of 25,000 tons/year. There will be enough additional space available to cope with future demand requirements. The move is in line with the company’s global growth strategy with a strong focus on the Asia Pacific (APAC) region.

Source:

Domo 

(c) JEC group
13.03.2020

JEC group to bring composite solutions for mobility to the 2020 Detroit Auto Show

After Mondial. Tech, NAIAS 2019, and eMove 360°, JEC Group will hold the 4th Composites Pavilion at the North American International Auto Show (NAIAS) in Detroit from June 9 to 11, 2020 in a spirit of innovation, business, and networking.

At NAIAS 2020, JEC Group will highlight the latest technologies and solutions allowing the automotive industry to innovate in product design, reduce the environmental impact of emissions and improve production rates thanks to composite materials. For the first time in 2020, the Composites Mobility Summit will simultaneously include the pavilion with a showcase of innovative parts, an extensive conference program, and a composites tour. Composite materials are a key part of the future of the Mobility industry and this Summit will both demonstrate the exciting variety of their applications, and aim to push forward their use in an even more global scope.

After Mondial. Tech, NAIAS 2019, and eMove 360°, JEC Group will hold the 4th Composites Pavilion at the North American International Auto Show (NAIAS) in Detroit from June 9 to 11, 2020 in a spirit of innovation, business, and networking.

At NAIAS 2020, JEC Group will highlight the latest technologies and solutions allowing the automotive industry to innovate in product design, reduce the environmental impact of emissions and improve production rates thanks to composite materials. For the first time in 2020, the Composites Mobility Summit will simultaneously include the pavilion with a showcase of innovative parts, an extensive conference program, and a composites tour. Composite materials are a key part of the future of the Mobility industry and this Summit will both demonstrate the exciting variety of their applications, and aim to push forward their use in an even more global scope.

Within the Composite Solutions for Mobility pavilion, the displayed parts will highlight the different applications of composites for mobility such as lightweight, design freedom, aesthetics and flexibility, resistance, strength and stiffness, function integration, hybridization, fuel storage, connectivity integration and battery housing.

 

More information:
Detroit Auto Show JEC
Source:

JEC group

(c) ISKO
12.03.2020

ISKO shared R-TWOTM, its 100% responsible platform, at Drapers Sustainable Fashion Forum

Supporting the industry through innovation and creativity.

The leading denim ingredient brand hosted a special panel to discuss some of the pioneering advancements in technology that are making the fashion industry more responsible: from R-TWOTM to automated laser technology.

With the fashion industry being considered one of the world’s most polluting businesses-sectors, collaborating and knowledge sharing are key in finding solutions for a better future. Fully aware of this scenario, for the second year running, ISKO was the headline sponsor at Drapers Sustainable Fashion Forum, the authoritative event bringing together the most responsible players to discuss what can be done to tackle the industry’s environmental and social issues through innovation and creativity.

Sharing knowledge, collaborating for change.

As evidence of its pioneering Responsible InnovationTM approach, ISKO shared its founding values of creativity, competence and citizenship by showcasing the R-TWOTM program, its latest responsible achievement, in a dedicated stand.

Supporting the industry through innovation and creativity.

The leading denim ingredient brand hosted a special panel to discuss some of the pioneering advancements in technology that are making the fashion industry more responsible: from R-TWOTM to automated laser technology.

With the fashion industry being considered one of the world’s most polluting businesses-sectors, collaborating and knowledge sharing are key in finding solutions for a better future. Fully aware of this scenario, for the second year running, ISKO was the headline sponsor at Drapers Sustainable Fashion Forum, the authoritative event bringing together the most responsible players to discuss what can be done to tackle the industry’s environmental and social issues through innovation and creativity.

Sharing knowledge, collaborating for change.

As evidence of its pioneering Responsible InnovationTM approach, ISKO shared its founding values of creativity, competence and citizenship by showcasing the R-TWOTM program, its latest responsible achievement, in a dedicated stand.

Stemming from the mill’s holistic vision, R-TWOTM represents a great example of how reducing, reusing, and recycling strategies can be implemented in a textile business to improve its environmental performance. With the goal to create fabrics that can provide both quality and responsibility, ISKO has developed this platform, which deals with the most critical issue that apparel supply chains are currently faced with: using more than what actually needed.

Source:

ISKO

ISKO logo
ISKOs shared its R-TWO Platform
11.03.2020

ISKO shared R-TWO™ at Drapers Sustainable Fashion Forum

ISKO presented its 100% responsible platform, R-TWO™.

The denim ingredient brand hosted a special panel to discuss some of the advancements in technology that are making the fashion industry more responsible: from R-TWO™ to automated laser technology.

With the fashion industry being considered one of the world’s most polluting businesses-sectors, collaborating and knowledge sharing are key in finding solutions for a better future. Fully aware of this scenario, ISKO was the headline sponsor at The Drapers Sustainable Fashion Forum brings together responsible players to discuss what can be done to tackle the industry’s environmental and social issues through innovation and creativity.

ISKO presented its 100% responsible platform, R-TWO™.

The denim ingredient brand hosted a special panel to discuss some of the advancements in technology that are making the fashion industry more responsible: from R-TWO™ to automated laser technology.

With the fashion industry being considered one of the world’s most polluting businesses-sectors, collaborating and knowledge sharing are key in finding solutions for a better future. Fully aware of this scenario, ISKO was the headline sponsor at The Drapers Sustainable Fashion Forum brings together responsible players to discuss what can be done to tackle the industry’s environmental and social issues through innovation and creativity.

Sharing knowledge, collaborating for change.
As evidence of its Responsible Innovation™ approach, ISKO presented the R-TWO™ program, its latest
responsible achievement. Stemming from the mill’s holistic vision, R-TWO™ represents a great example of how reducing, reusing, and recycling strategies can be implemented in a textile business to improve its  environmental performance.
The R-TWO™ reduces the amount of raw material sourced by using a blend of reused cotton and recycled polyester – both certified –, improving sourcing efficiency throughout the entire field-to-fabric production.
Reused cotton is certified with the Content Claim Standard – or CCS – from the Textile Exchange. As for recycled polyester, it can be either Recycled Claim Standard (RCS) or Global Recycled Standard (GRS) certified, depending on the content percentages. Together with this cutting-edge and fully responsible program, ISKO also uses automated laser
technology developed in partnership with Jeanologia.

“How technology can help make the fashion industry more sustainable”:
On March 11th, ISKO hosted a discussion about ways, to make the fashion industry more responsible
The panel was moderated by David Shah, consultant on design and marketing development, Publisher and CEO at Metropolitan Publishing BV and Associate Professor at ARTez (Arnhem, the Netherlands) and Associate Professor at Renmin University, (Beijing, China). The talk involved Keith O’Brien, ISKO Marketing & Business Development Manager, Victoria Soto, Jeanologia Custom Technology Consultant and Filippo Ricci, Fashion Open Studio Program & Partnership Manager.

 

Source:

Menabò Group, Global Press and PR Support

Trevira CS sample wall in the special exhibition "Textile Future by Trevira CS“ (c) Trevira
Trevira CS sample wall in the special exhibition "Textile Future by Trevira CS“
28.02.2020

Trevira at BCFA Open Berlin

Trevira will be joining the first BCFA Open Berlin pop-up exhibition, which will be held at the British Embassy on 6 May at the same time of Berlin Design Week (4 – 10 May 2020). The one-day fair is being organised by the British Contract Furnishing Association (BCFA), and members of the association will have the opportunity to display their products in the atrium of the post-modern embassy building.  

At the exhibition, specially invited interior designers and furnishers, along with purchasers from the contract market, will be able to find out more about the collections and products of high-end British manufacturers and textile houses, and attend interesting talks by two top specialists of the sector.

Trevira will be joining the first BCFA Open Berlin pop-up exhibition, which will be held at the British Embassy on 6 May at the same time of Berlin Design Week (4 – 10 May 2020). The one-day fair is being organised by the British Contract Furnishing Association (BCFA), and members of the association will have the opportunity to display their products in the atrium of the post-modern embassy building.  

At the exhibition, specially invited interior designers and furnishers, along with purchasers from the contract market, will be able to find out more about the collections and products of high-end British manufacturers and textile houses, and attend interesting talks by two top specialists of the sector.

Trevira will be showing a selection of Trevira CS fabrics which were on display earlier this year at the Heimtextil 2020, where they featured in the special exhibition ‘Textile Future by Trevira CS’. These fabrics are permanently flame retardant and can be deployed in a wide range of applications, as Berlin design company studio aisslinger impressively showed in the exhibition at the Trevira stand. For the Heimtextil fair, the prestigious studio aisslinger design team worked together with Trevira, creating a concept that revealed just how attractive and playful Trevira CS fabrics can be in a variety of settings on the contract market, including hospitality, healthcare, workspaces, public spaces and transport.

Designers and architects who are interested in taking part in the event are welcome to register their details with Trevira.

 

More information:
Trevira BCFA
Source:

Trevira

Michael Roellke, Volker Schmid, Jochen Adler und André Wissenberg (von links nach rechts) bei der Podiumsdiskussion zusammen mit Sudipto Mandal aus der indischen Niederlassung. (c) Oerlikon Manmade Fibers
Michael Roellke, Volker Schmid, Jochen Adler und André Wissenberg (von links nach rechts) bei der Podiumsdiskussion zusammen mit Sudipto Mandal aus der indischen Niederlassung.
27.02.2020

Oerlikon Manmade Fibers segment sets a trend with three Customer Days in India

Technology transfer that is creating waves

For more than a decade now, the Manmade Fibers segment of the Swiss Oerlikon Group has been hosting a comprehensive technology symposium at the beginning of each year in the Indian region around Silvassa/Daman. Numerous Indian manmade fiber producers have settled in this area, around a four-hour drive north of Mumbai. Fed from Oerlikon polycondensation and extrusion systems, these companies manufacture polyester, nylon and polypropylene on large-scale installations with Oerlikon Barmag WINGS POY, WINGS FDY, IDY and DTY product lines and using Oerlikon Neumag’s staple fiber and BCF technologies. Reason enough for the Manmade Fibers segment’s experts to regularly provide their clientèle with detailed specialist presentations in India on the latest developments of the product and service portfolio.

Technology transfer that is creating waves

For more than a decade now, the Manmade Fibers segment of the Swiss Oerlikon Group has been hosting a comprehensive technology symposium at the beginning of each year in the Indian region around Silvassa/Daman. Numerous Indian manmade fiber producers have settled in this area, around a four-hour drive north of Mumbai. Fed from Oerlikon polycondensation and extrusion systems, these companies manufacture polyester, nylon and polypropylene on large-scale installations with Oerlikon Barmag WINGS POY, WINGS FDY, IDY and DTY product lines and using Oerlikon Neumag’s staple fiber and BCF technologies. Reason enough for the Manmade Fibers segment’s experts to regularly provide their clientèle with detailed specialist presentations in India on the latest developments of the product and service portfolio.

And this was once again the case at the event held at the beginning of 2020, where around 450 managers and employees from local businesses took the opportunity to exchange ideas and information. For the third time in succession, Oerlikon also entered into dialog with the next generation of managers at major Indian polyester and nylon manufacturers in a separate event hosted in Mumbai beforehand. The technology symposium was again held – for the very first time – just a few days later and in a slightly modified form at a second venue: in Kolkata in West Bengal, a potential second future key location for manufacturing manmade fibers in India according to plans revealed by the Indian government. Here, the discussions held by the Oerlikon experts focused above all on the transfer of technologies for manufacturing polyester, nylon and polypropylene. Oerlikon is able to offer the entire process chain – from the melt to the textured yarn or the fibers and including the necessary semi- and fullyautomated logistics process – from a single source. This is of interest above all for potential new customers and investors in West Bengal and neighboring Bangladesh, as some do not have decades of expertise in manufacturing manmade fibers, as is the case for most companies in the region around Silvassa/Daman.

 

Source:

Oerlikon Manmade Fibers

SUSTAIN 2020 in the Run-Up to the International Cotton Conference Photo: Weser-Kurier
SUSTAIN 2020 in the Run-Up to the International Cotton Conference
25.02.2020

SUSTAIN 2020 in the Run-Up to the International Cotton Conference

The conference on sustainability in production, trade and consumption will take a second round: On March 24, 2020, the Weser-Kurier’s conference SUSTAIN will take place in the run-up to the International Cotton Conference once more. The Bremen Cotton Exchange is again cooperating partner of this event. The theme “City and Change – the Future of the Textile Retail Trade” is on focus this year.

Shirt and trpousers or blouse and skirt – clothing is an instrument of expression, a social must and a major factor of consumption. Internet and debates on climate change have changed the indicators. On the one hand, textile online trade is booming, while local stores have come under pressure to an increasing degree and cities are on the search for new ideas. On the other hand, consumers increasingly ask for products considering aspects of fairness and ecology during production. Manufacturers and stores have to react. These subjects are on focus during the Sustain that takes place on Tuesday, March 24, 2020 in Bremen in the Glocke.

The conference on sustainability in production, trade and consumption will take a second round: On March 24, 2020, the Weser-Kurier’s conference SUSTAIN will take place in the run-up to the International Cotton Conference once more. The Bremen Cotton Exchange is again cooperating partner of this event. The theme “City and Change – the Future of the Textile Retail Trade” is on focus this year.

Shirt and trpousers or blouse and skirt – clothing is an instrument of expression, a social must and a major factor of consumption. Internet and debates on climate change have changed the indicators. On the one hand, textile online trade is booming, while local stores have come under pressure to an increasing degree and cities are on the search for new ideas. On the other hand, consumers increasingly ask for products considering aspects of fairness and ecology during production. Manufacturers and stores have to react. These subjects are on focus during the Sustain that takes place on Tuesday, March 24, 2020 in Bremen in the Glocke.

Exciting keynote speakers and panel guest from fashion, science and the textile industry
Sustain will feature outstanding speakers from the economy, politics and society discussing for instance the possibilities of new techniques in stationary retail trade, the compatibility of fair production with business interests of manufacturers as well as the question whether consumers are willing to pay the additional costs of sustainability. These are themes that influence the vitality of the cities just as the purchase decisions of the consumers.

Prof. Dr Niko Paech, Professor of Economics, Wolfgang Krogmann, Advisory Director Primark, Urs-Stefan Kinting, Managing Partner of the Zero Group, Model & TV Presenter Alena Gerber, Rolf Heimann, CEO Hessnatur Stiftung, Kai Falk, Managing Director Communication of the German retail association Handelsverband Deutschland and many others confirmed their participation.

Source:

Bremer Baumwollbörse

Asahi Kasei Adavnce at ISPO 2020 in Munich (c) AKA
Asahi Kasei Adavnce at ISPO 2020 in Munich
18.02.2020

Asahi Kasei Advance presents ECOSENSOR™ at ISPO 2020

At ISPO, AKA – Asahi Kasei Advance keeps the planet fit and healthy at the same time. The cutting edge department of global material innovator Asahi Kasei, unveils ECOSENSOR™, the cutting-edge fabric collection boosting responsible innovation with a “New Eco High-tech Force of Nature” new generation of performance.

Harnessing AKA expertise in yarning a smarter future, the new range focuses on sportwear, urban and athleisure fabrics. “At ISPO we launch the energetic protein fitting perfectly in textiles for clothes with an active imprint, comfort touch and smooth style. From-yarn-to-dyeing and along the whole supply chain, the collection is 100% traceable.” Says Nishizawa Akira, President & Representative Director Asahi Kasei Advance corporation.

Such goals were scored thanks to the renown expertise of Research & Development and energized by constantly and strictly controlled processes that aim to save energy, water and Green House gases emissions. The result is a high-performative collection combining maximum comfort with durability and stretch-ability.

At ISPO, AKA – Asahi Kasei Advance keeps the planet fit and healthy at the same time. The cutting edge department of global material innovator Asahi Kasei, unveils ECOSENSOR™, the cutting-edge fabric collection boosting responsible innovation with a “New Eco High-tech Force of Nature” new generation of performance.

Harnessing AKA expertise in yarning a smarter future, the new range focuses on sportwear, urban and athleisure fabrics. “At ISPO we launch the energetic protein fitting perfectly in textiles for clothes with an active imprint, comfort touch and smooth style. From-yarn-to-dyeing and along the whole supply chain, the collection is 100% traceable.” Says Nishizawa Akira, President & Representative Director Asahi Kasei Advance corporation.

Such goals were scored thanks to the renown expertise of Research & Development and energized by constantly and strictly controlled processes that aim to save energy, water and Green House gases emissions. The result is a high-performative collection combining maximum comfort with durability and stretch-ability.

With ECOSENSOR™, Asahi Kasei Advance truly innovates at ISPO as the very first producers choosing the high-performance path with sustainable values. “Like a truly complete athlete, ECOSENSOR™ wins both during the sprint and all along its performance. It’s outstanding light & stretch features match durability.”

Indeed, the flexible and multitasking range is the high-tech solution for sportwear, outerwear and beyond. The collection embraces the casual and sporty mood of active urban surfers as well as that easy-to-wear attitude for a relaxing free-time at home.

Excellent stretch and high-performative features match the adventurous temperament of extreme explorers, while durability and resistance are the key features to weave fabrics for outdoor activities. The target of ECOSENSOR™ by Asahi Kasei is to push at maximum the choice towards bluesign® approved and Standard 100 by OEKO-TEX® certified ingredients and production processes, and GRS (Global Recycled Standard) for recycled ingredients, showing the path to sustainability.

Working with the best like-minded apparel partners, AKA has achieved unsurpassed active climate control materials. The unique high-tech and low-impact functionality has been designed to make a real, sustainable difference a better future.

More information:
Asahi Kasei ISPO Munich 2020
Source:

GB Network

Ecosensor Logo (c) GB Network
Ecosensor Logo
11.02.2020

Asahi Kasei Advance champions sustainability at ISPO 2020 with ECOSENSOR ™

A true New Eco High-Tech Force of Nature

At ISPO, AKA – Asahi Kasei Advance keept the planet fit and healthy at the same time. The cutting edge department of global material innovator Asahi Kasei, unveils ECOSENSOR™, the cutting-edge fabric collection boosting responsible innovation with a “New Eco High-tech Force of Nature” new generation of performance.

Harnessing AKA expertise in yarning a smarter future, the new range focuses on sportwear, urban and athleisure fabrics. “At ISPO we launch the energetic protein fitting perfectly in textiles for clothes with an active imprint, comfort touch and smooth style. From-yarn-to-dyeing and along the whole supply chain, the collection is 100% traceable.” Says Nishizawa Akira, President & Representative Director Asahi Kasei Advance corporation.

With ECOSENSOR™, Asahi Kasei Advance truly innovates at ISPO as the very first producers choosing the high-performance path with sustainable values.

A true New Eco High-Tech Force of Nature

At ISPO, AKA – Asahi Kasei Advance keept the planet fit and healthy at the same time. The cutting edge department of global material innovator Asahi Kasei, unveils ECOSENSOR™, the cutting-edge fabric collection boosting responsible innovation with a “New Eco High-tech Force of Nature” new generation of performance.

Harnessing AKA expertise in yarning a smarter future, the new range focuses on sportwear, urban and athleisure fabrics. “At ISPO we launch the energetic protein fitting perfectly in textiles for clothes with an active imprint, comfort touch and smooth style. From-yarn-to-dyeing and along the whole supply chain, the collection is 100% traceable.” Says Nishizawa Akira, President & Representative Director Asahi Kasei Advance corporation.

With ECOSENSOR™, Asahi Kasei Advance truly innovates at ISPO as the very first producers choosing the high-performance path with sustainable values.

Indeed, the flexible and multitasking range is the high-tech solution for sportwear, outerwear and beyond. The collection embraces the casual and sporty mood of active urban surfers as well as that easy-to-wear attitude for a relaxing free-time at home.

 

More information:
ISPO Munich ECOSENSOR
Source:

GB Network

 The BCF S8 sets new standards with regards to color separation. (c) Oerlikon Manmade Fibers
The BCF S8 sets new standards with regards to color separation.
30.01.2020

Egy Stitch & Tex 2020: Oerlikon Manmade Fibers Focuses on Carpet yarns

The Oerlikon Manmade Fibers segment will be presenting itself at the Egy Stitch & Tex 2020 between March 5 and 8, 2020 in Cairo – with a clear focus on the needs of the African market. In Hall 1, Stand B2 The Oerlikon Barmag and Oerlikon Neumag experts will also be showcasing the comprehensive product and service portfolio of the world market leader for manmade fiber systems at the stand of Oerlikon’s representative ATAG Export & Import.

The spotlight of the Oerlikon Manmade Fibers segment’s trade fair attendance will be on two core technologies: the new generation of Oerlikon Barmag eAFK Evo texturing machines is to be unveiled within the African market for the very first time. It promises higher speeds and productivity with consistently high product quality, along with lower energy consumption and simpler operation vis-à-vis comparable market solutions. In particular, the numerous value-added features include two that convince with cutting-edge technology: the optimized, innovative EvoHeater and the EvoCooler, a completely newly-developed active cooling unit.

The Oerlikon Manmade Fibers segment will be presenting itself at the Egy Stitch & Tex 2020 between March 5 and 8, 2020 in Cairo – with a clear focus on the needs of the African market. In Hall 1, Stand B2 The Oerlikon Barmag and Oerlikon Neumag experts will also be showcasing the comprehensive product and service portfolio of the world market leader for manmade fiber systems at the stand of Oerlikon’s representative ATAG Export & Import.

The spotlight of the Oerlikon Manmade Fibers segment’s trade fair attendance will be on two core technologies: the new generation of Oerlikon Barmag eAFK Evo texturing machines is to be unveiled within the African market for the very first time. It promises higher speeds and productivity with consistently high product quality, along with lower energy consumption and simpler operation vis-à-vis comparable market solutions. In particular, the numerous value-added features include two that convince with cutting-edge technology: the optimized, innovative EvoHeater and the EvoCooler, a completely newly-developed active cooling unit.

The second technology focus offers new opportunities for the Egyptian market and the Middle Eastern markets in particular: with Oerlikon Neumag’s BCF S8 monocolor and tricolor system, the segment will be unveiling its new carpet yarn production flagship. Superlative spinning speeds, up to 700 individual filaments, finer titers of up to 2.5 dpf – the performance data and technological finesse of the new system have already made a huge impression at numerous trade fairs and roadshows over the past year. The tricolor’s core component is the new, patent-pending Color Pop Compacting unit (CPC-T) for even more flexible and more even color separation. With the CPC-T, individually-controllable air pressures for each color provide pre-tangling, which accentuates the colors and hence makes more than 200,000 different shades possible. Whereas it has been very difficult to manufacture strongly color-separated or color-accentuated BCF yarns from polyamide 6 to date, this will in future be possible thanks to the CPC-T system. As a result of the new design, the CPC-T is now also suitable for processes with low yarn tensions.
 
Expanded product offering for manufacturing carpet yarns
Know-how covering all relevant technologies deployed in manmade fiber spinning plants enables Oerlikon – as the world’s only manufacturer – to expand its range of products and services for making carpet yarns. The POY- and texturing-based system concept is designed for a carpet and home textiles segment that demands particularly soft and bulky polyester yarns with BCF-like properties. Here, the aim is to produce yarns with titers of max. 1300dtex and typically more than 1,000 filaments, with typical products including, for example, 1300dtex f1152, 660dtex f1152 and 990dtex f768. The machine concept comprises the well-known WINGS HD POY winder, along with the eAFK Big-V texturing machine.

 

Source:

Oerlikon Manmade Fibers

MANTECO Logo NEW GENERATION RECYCLED WOOL by MANTECO
MANTECO Logo
29.01.2020

Manteco presents The Manteco System

The integrated sustainable network making fashion circular, Made in Italy and 100% traceable

World leading textile manufacturer Manteco presents its sustainable path for a better future: The Manteco System. A strategy and a vision shaping the company’s sustainable imprint since 1943. The system consists in the development and engineering of a production network involving 100 partner-companies from the whole supply chain “We all team up responsibly to create premium collection based on transparent , traceable  circular economy practices,” comments Matteo Mantellassi, co-CEO of Manteco.
 
To achieve meeting the demand for fair and sustainable fashion that consumers believe in, and is expected  from our clients, the company and its partners have created and accomplished to a Protocol of Sustainable Values and Commitments in line with the highest standards of the global market.

The integrated sustainable network making fashion circular, Made in Italy and 100% traceable

World leading textile manufacturer Manteco presents its sustainable path for a better future: The Manteco System. A strategy and a vision shaping the company’s sustainable imprint since 1943. The system consists in the development and engineering of a production network involving 100 partner-companies from the whole supply chain “We all team up responsibly to create premium collection based on transparent , traceable  circular economy practices,” comments Matteo Mantellassi, co-CEO of Manteco.
 
To achieve meeting the demand for fair and sustainable fashion that consumers believe in, and is expected  from our clients, the company and its partners have created and accomplished to a Protocol of Sustainable Values and Commitments in line with the highest standards of the global market.

“On a hand, the protocol preserves the unique ‘genius loci’ of our territory – it respects the heritage of all our partners, from the smaller businesses to the more structured ones - on the other hand, it works like a shared compass of sustainable values, allowing the whole supply chain behind Manteco products to stand out and be competitive on the global stage” adds Mantellassi.
 
The protocol and its monitored and traceable system cover virtuous management of resources – e.g. Water, energy and chemical products - waste management and low production impact on the environment but also responsible standards in terms of employment, quality of the working environment, equal rights and anti-discrimination policies.

One of the key  results of such commitment and sustainable development is the creation of an upgraded version of the recycled wool  MWool™: a top ingredient made from premium recycled wool process guaranteed by the Manteco System.The System works like a symphony where management, measurement and controls  are not there just to test  the quality of each single phase of processes or  products , but to make sure and offer the complete traceability of Manteco production.  From raw material, to yarn, spinning, finishing, testing and final fabric.

Some productions tips about Manteco:

  •  5.3 million kg of raw materials processed annually.
  •  6.860 tests on raw material per year.
  •  34.400 tests on finished products.
  •  100% made in Italy system completely based in the Prato district since 1943.
  •  Total transparency and traceability thanks to a highly skilled management system.

With a turnover of over 91m Euro in 2019 and an annual growth of 17,80% since 2012, Manteco SpA is the 4th textile company in Italy, listed in the TOP30 companies of the Italian fashion system. “The unique Manteco system adds value to our products while highlighting the sustainable path we share with all our partners both upstream and downstream”.

More information:
Manteco
Source:

(c) GB Network

Oerlikon (c) Oerlikon
Oerlikon
20.12.2019

Oerlikon: BCF S8 with CPC-T - color separation has never been so easy

Oerlikon Neumag promises more flexibility in the color pattern design of carpets with the latest carpet yarn system BCF S8 at DOMOTEX 2020 in Hanover. All trade fair visitors can convince themselves of the possibilities for product differentiation in Hall 11, Stand A36.

Multi-colored carpets are becoming increasingly popular and the desire for significantly more flexible color mixing variants for product differentiation is increasing. Oerlikon Neumag has focused on this and developed the BCF S8, a platform that leaves nothing to be desired when it comes to the color separation of tricolor yarns - from mélange to strongly separated.

Over 200,000 different shades out of three colors
The core component in this process is the new, patent-pending Color Pop Compacting Unit (CPC-T) for an even more flexible and even color separation. Individually controllable air pressures per color in the CPC-T provide a pre-tangling, which results in an accentuation of the colors and thus enables over 200,000 different shades.

Oerlikon Neumag promises more flexibility in the color pattern design of carpets with the latest carpet yarn system BCF S8 at DOMOTEX 2020 in Hanover. All trade fair visitors can convince themselves of the possibilities for product differentiation in Hall 11, Stand A36.

Multi-colored carpets are becoming increasingly popular and the desire for significantly more flexible color mixing variants for product differentiation is increasing. Oerlikon Neumag has focused on this and developed the BCF S8, a platform that leaves nothing to be desired when it comes to the color separation of tricolor yarns - from mélange to strongly separated.

Over 200,000 different shades out of three colors
The core component in this process is the new, patent-pending Color Pop Compacting Unit (CPC-T) for an even more flexible and even color separation. Individually controllable air pressures per color in the CPC-T provide a pre-tangling, which results in an accentuation of the colors and thus enables over 200,000 different shades.

Color Pop Compacting also for PA6 yarns
Until now, it was difficult to produce highly color-separated or accentuated BCF yarns from polyamide 6, but in the future, this will be possible thanks to the CPC-T. Thanks to the new design, the CPC-T is now also suitable for processes with low thread tensions.

Source:

Oerlikon

(c) Genesis:M&J
06.12.2019

GENESIS:M&J Group targets high fashion denim market in EU

The Bangladesh international player presents its unique eco-innovation path and a specialhigh-end capsule collection in collaboration with PG DENIM.

GENESIS:M&J Group comes back at the Denim Première Vison London (3-4 December) marking a positive end of the 2019, with new objectives for the future. The leading facility of the Group has affirmed itself as one of the most reliable international garment manufacturer, especially in denim market, and now it is time for another leap forward. The aim is to target more in depth the high fashion denim market in Europe with renowned proposals towards a more authentic, comfortable and sustainable denim offer.

The Bangladesh international player presents its unique eco-innovation path and a specialhigh-end capsule collection in collaboration with PG DENIM.

GENESIS:M&J Group comes back at the Denim Première Vison London (3-4 December) marking a positive end of the 2019, with new objectives for the future. The leading facility of the Group has affirmed itself as one of the most reliable international garment manufacturer, especially in denim market, and now it is time for another leap forward. The aim is to target more in depth the high fashion denim market in Europe with renowned proposals towards a more authentic, comfortable and sustainable denim offer.

The first output to underline the new approach is the high-end capsule collection realized in collaboration with PG DENIM, that premiered at the show
A collection where the great industrial experience and quality in garment manufacturing of GENESIS meets, in a perfect and inspiring contamination, the 100% Italian artisanal craft and unique interpretation of PG DENIM fabrics. A complete co-branding that has given life to unique garments with dedicated tags and hangtags, to show a fashionable, sustainable and high-quality final output, entirely produced in Bangladesh. The perfect meeting to provide a great example of how this collaborative path with European top-quality player could lead to a new positioning for the company.

The improvements achieved by GENESIS are enhanced also in the s/s 2021 collection with new trends involving eco-conscious fabrics such as organic cotton, recycled fabric and polymer, realizing blends with natural fibers like hemp & linen while working also with a wide variety of biodegradable materials. Technical fibers are also on the spotlight with an increasing importance gained by proofed lightweights such as waterproof. Moods like hyper blue, natural cotton colors, flat bright indigo mid shades or urban grey and reactive layers dominates the feeling of the new collection. In terms of looks and treatments the collection has developed several unique interpretations such as engineered garments, digital laser patterns, wester silhouettes, workwear, soft dyes, contemporary stripes, dirty green cast and eco-acid wash. A kaleidoscopic collection where technology and tradition meet one unique big trend: more sustainable than ever.

More information:
Genesis M&J Group
Source:

Menabò Group