From the Sector

Reset
7 results
(c) Chomarat
14.11.2019

METSTRADE show 2019: Chomarat provides Arcona Yachts with C-PLYTM carbon reinforcement

Chomarat Group, expert in composite reinforcements for the marine market developed a high performing C-PLYTM reinforcement for the hull and deck of Arcona 435 and 465. Both cruiser-racer are a unique combination of comfort onboard and performances, for fast family cruising and high-level races thanks to their specific design, and the use of C-PLY™. The carbon NCF reinforcement allows structural design benefits, premium surface quality and overall parts cost saving.

“With 45 years of expertise, Chomarat is a pioneer in developing solutions to achieve weight reduction, improved surface appearance and stronger structure.

C-PLY™ makes it possible to meet these specifications, while ensuring stable quality and cost-effectiveness” explains Vincent Cholvy, Marine market Manager at Chomarat.

Chomarat Group, expert in composite reinforcements for the marine market developed a high performing C-PLYTM reinforcement for the hull and deck of Arcona 435 and 465. Both cruiser-racer are a unique combination of comfort onboard and performances, for fast family cruising and high-level races thanks to their specific design, and the use of C-PLY™. The carbon NCF reinforcement allows structural design benefits, premium surface quality and overall parts cost saving.

“With 45 years of expertise, Chomarat is a pioneer in developing solutions to achieve weight reduction, improved surface appearance and stronger structure.

C-PLY™ makes it possible to meet these specifications, while ensuring stable quality and cost-effectiveness” explains Vincent Cholvy, Marine market Manager at Chomarat.

THE CUTTING-EDGE TECHNOLOGY FOR SERIAL PRODUCTION OF CARBON BOATS
A study was led to determine the optimal construction to develop a high performing C-PLY™ range for a better permeability in infusion process. The result is a carbon NCF that achieves high mechanical performances, multi resins compatibility and cost efficiency. “Chomarat is the best choice for supplying the product our factory prefers to work with: stable quality and cost effectiveness are the key benefits” explains Nicolas Broberg, Managing Director Arcona Yacht.

Infusion technology for hull and deck with up to 70% level of carbon in the laminate gives the greatest possible strength.

More information:
CHOMARAT
Source:

Media Apoce

(c) Chomarat
09.10.2019

Chomarat fabrics at the KraussMaffei booth during K Messe 2019

Chomarat Group’s composite reinforcements will be featured at the KraussMaffei stand during the next K Messe in Düsseldorf. Chomarat has created a glass reinforcement adapted to the mass production of automotive parts, helping to lighten leaf springs by 60% compared to metal.

Automotive: Producing 60% lighter leaf springs for car's underbody
The new leaf springs made of composites are 60% lighter than their pendants made of steel thanks to KraussMaffei process and the involvement of a network of partners, including Chomarat with G-PLY™ glass reinforcement. Their strength can be deliberately increased in sections where it is required and the corrosion resistance offers further added value.

Chomarat Group’s composite reinforcements will be featured at the KraussMaffei stand during the next K Messe in Düsseldorf. Chomarat has created a glass reinforcement adapted to the mass production of automotive parts, helping to lighten leaf springs by 60% compared to metal.

Automotive: Producing 60% lighter leaf springs for car's underbody
The new leaf springs made of composites are 60% lighter than their pendants made of steel thanks to KraussMaffei process and the involvement of a network of partners, including Chomarat with G-PLY™ glass reinforcement. Their strength can be deliberately increased in sections where it is required and the corrosion resistance offers further added value.

“We created the fabrics, when Engenuity developed the component, Huntsman supplied the matrix system made of epoxy resin, Johns Manville supplied the glass fibers, Schmidt & Heinzmann manufactured the preforms, Alpex designed the RTM mold and Hufschmied (Bobingen, Germany) took charge of post-mold processing of the component by milling. KraussMaffei has taken over the project management for Hengrui and coordinates the project with the partners.” Francisco De Oliveira at Chomarat explains.

More information:
CHOMARAT K 2019
Source:

AGENCE APOCOPE

(c) CHOMARAT
04.03.2019

Chomarat Carbon Reinforcements at JEC WORLD 2019

Composite reinforcement specialist Chomarat will exhibit its latest woven and multiaxial carbon fibre reinforcements at JEC World 2019. "Prepregs are used in the most demanding markets, such as aerospace or the automotive industry. Due to their high performance, Chomarat’s carbon fabrics are highly considered by prepreggers. Compared to standard solutions, the multiaxial reinforcements developed by the group offer Chomarat’s converter customers significant productivity gains. With its production sites in France, Asia and the United States, Chomarat is able to supply its customers and guarantee the same high level of quality in all countries," explains Group Managing Director Michel Cognet.

Composite reinforcement specialist Chomarat will exhibit its latest woven and multiaxial carbon fibre reinforcements at JEC World 2019. "Prepregs are used in the most demanding markets, such as aerospace or the automotive industry. Due to their high performance, Chomarat’s carbon fabrics are highly considered by prepreggers. Compared to standard solutions, the multiaxial reinforcements developed by the group offer Chomarat’s converter customers significant productivity gains. With its production sites in France, Asia and the United States, Chomarat is able to supply its customers and guarantee the same high level of quality in all countries," explains Group Managing Director Michel Cognet.

C-WEAVE™ - THE QUALITY AND RELIABILITY BENCHMARK
In just a few years, prepreggers have come to consider Chomarat's C-WEAVE™ carbon-fibre fabrics as a benchmark for surface-finish quality and processability.
The reinforcement contributes to productivity and reliability during the prepregging process. Helen Doughty, Director at SHD Composites, testifies: “The consistent high quality of C-WEAVE™ has been a key part of SHD Composite Materials continued success and growth.”
"Prepreg users often manufacture Class A surface parts for demanding applications, and they need excellence and reproducibility," explains Chomarat’s Prepreg Market Manager Ulrike Salmon.

C-PLY™: GOING FURTHER WITH CARBON MULTIAXIALS
The advantages of multi-axial reinforcements are now well established - oriented axes, absence of resin-rich areas allowing a high fibre content, and improved mechanical tensile and/or bending performance thanks to the non-crimp fibres.
By developing its C-PLY™ range, Chomarat further demonstrates that multiaxials are a real asset in terms of performance and appearance. "Chomarat strives to minimize marking on parts and to optimize surface quality through fibre spreading and the use of suitable stitches. C-PLY™ can also integrate aesthetic functions by using the assembly seam as a graphic design", continues Ulrike Salmon.
These new advantages are important for the automotive, sports-equipment and consumer-electronics markets, which seek to combine premium quality and productivity.

 

Source:

AGENCE APOCOPE

CHOMARAT Reinforcements, 3 Examples Offered in Live Demos at CAMX 2018 EXPO
Travis IRVIN, in live demos at CAMX 2017
17.10.2018

CHOMARAT Reinforcements, 3 Examples Offered in Live Demos at CAMX 2018 EXPO

  • 16-18 October 2018, Kay Bailey Hutchinson Convention Center, Dallas, TX

A skateboard, architectural panels and a rigid roof for boats – all three products rely on CHOMARAT composite reinforcements. The three designs will be on display at CAMX Expo in the demonstration area of COMPOSITES ONE, partner of CHOMARAT and leader in composites distribution in North America. CHOMARAT’s reinforcements enable to give unique properties to these three applications.

Proof positive: reinforcements offer design flexibility & improved mechanical performance

These three applications give CHOMARAT the opportunity to demonstrate the performance of its uniquely designed reinforcements in real time. “The skateboard combines Rovicore™, the multi-function closed-mold reinforcement developed by CHOMARAT, with C-Weave™, its woven carbon fabric that offers both structural performance and aesthetics to the design. Rovicore™ provides the permeability, while C-Weave™ provides the carbon aspect,” explains Brian Laufenberg, president, CHOMARAT North America.

  • 16-18 October 2018, Kay Bailey Hutchinson Convention Center, Dallas, TX

A skateboard, architectural panels and a rigid roof for boats – all three products rely on CHOMARAT composite reinforcements. The three designs will be on display at CAMX Expo in the demonstration area of COMPOSITES ONE, partner of CHOMARAT and leader in composites distribution in North America. CHOMARAT’s reinforcements enable to give unique properties to these three applications.

Proof positive: reinforcements offer design flexibility & improved mechanical performance

These three applications give CHOMARAT the opportunity to demonstrate the performance of its uniquely designed reinforcements in real time. “The skateboard combines Rovicore™, the multi-function closed-mold reinforcement developed by CHOMARAT, with C-Weave™, its woven carbon fabric that offers both structural performance and aesthetics to the design. Rovicore™ provides the permeability, while C-Weave™ provides the carbon aspect,” explains Brian Laufenberg, president, CHOMARAT North America.

During the live demos, architectural panels using Rovicore™ and a rigid boat roof in RTM will also be made. “With 60 years of expertise in designing composite reinforcements, CHOMARAT demonstrates that its reinforcements offer excellent mechanical performance and design for a large number of projects in sectors as diverse as sport and leisure, marine and building,” adds Travis IRVIN, Sales Manager and Closed Mould Process Expert at CHOMARAT.

Meet CHOMARAT teams at BOOTH V39 and see Live demos in the COMPOSITES ONE demonstration area at CAMX 2018 EXPO

More information:
CHOMARAT Composites CAMX 2018 EXPO
Source:

AGENCE APOCOPE

CHOMARAT extends its C-TAPE™ line with a new carbon tape (c) Gilles Martin-Raget - Beneteau
26.04.2018

CHOMARAT extends its C-TAPE™ line with a new carbon tape

CHOMARAT, the composite reinforcement specialist, has developed a new unidirectional woven tape for its C-TAPETM line of products. Designed to meet the standards of industrial production, the new C-TAPE™ is reinforcing the foils of the “Figaro Beneteau 3”. These appendages improve the monohull’s stability and performance.

“For the series production of the foils, the Beneteau Group chose MULTIPLAST, the well-known builder of racing boats, which engaged the CHOMARAT Group to provide project support and achieve the best cost/performance balance,” explains Vincent CHOLVY, CHOMARAT’s Manager for the boating market.

C-TAPE™, a high-performance carbon reinforcement with great design flexibility
C-TAPETM offers a lot of flexibility in terms of weight, width and construction. It has been optimized to facilitate series production, yet provide the foils with maximum performance.
The weft yarn developed by CHOMARAT makes the tape easy to handle and to work with. It is produced in 50-cm widths in order to adapt better to the mould, thus reducing both scrap and production cost.

CHOMARAT, the composite reinforcement specialist, has developed a new unidirectional woven tape for its C-TAPETM line of products. Designed to meet the standards of industrial production, the new C-TAPE™ is reinforcing the foils of the “Figaro Beneteau 3”. These appendages improve the monohull’s stability and performance.

“For the series production of the foils, the Beneteau Group chose MULTIPLAST, the well-known builder of racing boats, which engaged the CHOMARAT Group to provide project support and achieve the best cost/performance balance,” explains Vincent CHOLVY, CHOMARAT’s Manager for the boating market.

C-TAPE™, a high-performance carbon reinforcement with great design flexibility
C-TAPETM offers a lot of flexibility in terms of weight, width and construction. It has been optimized to facilitate series production, yet provide the foils with maximum performance.
The weft yarn developed by CHOMARAT makes the tape easy to handle and to work with. It is produced in 50-cm widths in order to adapt better to the mould, thus reducing both scrap and production cost.

“The project was an ambitious one,” says MULTIPLAST General Manager Yann PENFORNIS. “We had to reach a lower target cost, achieve a perfect foil shape, guarantee identical weight for all parts, and produce a set of foils per week over a period of one year.”

A reinforcement that facilitates flow in multi-ply carbon structures
Fifty plies of tape are used to make the foil so that it can resist high levels of stress and achieve optimal performance.
The specific structure of C-TAPETM facilitates resin flow throughout the thickness. The reinforcement provides the desired mechanical performance and also cuts down on production time.
The result is an ultra-innovative foil, both for its geometry and for the fabrication process (infu-jection) used.

“This new C-TAPE™ is the fruit of close co-operation between the MULTIPLAST and CHOMARAT development teams, and it rounds out our broad range of tapes. We are working on different fibres and adapting the widths to our customers’ processes in order to reduce costs,” concludes Vincent CHOLVY.

By the end of summer 2018, some one hundred foils will have been produced for assembly on the first 50 “Figaro Beneteau 3” monohulls.

More information:
CHOMARAT C-TAPE™
Source:

Agence APOCOPE

Logo CHOMARAT (C) CHROMARAT
26.02.2018

CHOMARAT presents its latest innovations at the 2018 JEC World

CHOMARAT, the composite reinforcement specialist group, is launching its multiaxial glass NCF for thermoplastic composites. The unique patented stitching yarn used can withstand processing temperatures to 400°C, making it an innovative industrial solution for thermoplastic composites and an alternative to the woven reinforcements used especially in the automotive sector. For the first time, CHOMARAT is also exhibiting a unidirectional carbon NCF reinforcement that is adapted to the productivity and performance requirements in the wind energy sector.

CHOMARAT, the composite reinforcement specialist group, is launching its multiaxial glass NCF for thermoplastic composites. The unique patented stitching yarn used can withstand processing temperatures to 400°C, making it an innovative industrial solution for thermoplastic composites and an alternative to the woven reinforcements used especially in the automotive sector. For the first time, CHOMARAT is also exhibiting a unidirectional carbon NCF reinforcement that is adapted to the productivity and performance requirements in the wind energy sector.

AN INNOVATIVE INDUSTRIAL SOLUTION TO REINFORCE AUTOMOTIVE THERMOPLASTICS
Thanks to a unique patented stitching yarn, the glass NCF reinforcement (G-PLY™) developed by CHOMARAT offers new possibilities in thermoplastic RTM and organosheet processes. “This is an especially innovative solution, utilizing stitching yarns that are compatible with processing temperatures to 400°C. These multiaxials improve the performance and provide a lot of construction freedom in terms of fibre orientation. These new design possibilities contribute to structural optimization. The quest for more lightweight vehicles, shorter cycle times and lower cost is a major issue for all builders,” explains CHOMARAT Automotive Market Manager Francisco De Oliveira.
This new heat-stable G-PLY™ reinforcement can withstand very high processing temperatures without deformation and provides optimal mechanical performance.

A CARBON UD TO REINFORCE EXTRA-THICK WIND TURBINE STRUCTURES
For the first time, CHOMARAT is exhibiting an infusion-moulded laminate made with 150 plies of its new unidirectional carbon C-PLY™. This 600g/m², high-permeability NCF can be used to create extra-thick structures, in particular the wind-turbine blade stiffeners, or spar caps. “Cost reduction is the challenge in the wind energy industry. Increasing the blade length by incorporating carbon stiffeners increases power, and so it also lowers the cost of the energy,” says CHOMARAT Wind Energy Market Manager Raphaël PLEYNET. The carbon UD developed by CHOMARAT provides a solution to achieve the goal to optimize the weight/power ratio. The UD’s high permeability reduces cycle times and lowers the blade production costs.

Professor Sung Ha from the University of Hanyang will give a conference on composite challenges in the wind energy sector at 11:30 am on Wednesday, 7 March 2018 at JEC World.
Established in 1898, CHOMARAT is an international industrial textile group, involved in three businesses: Composites Reinforcements, Construction Reinforcements, Coatings & Films–Textiles. The privately held company operates in France, Tunisia, the United States and China to service its global customers.
CHOMARAT leads a strong innovation strategy, rising to challenges, developing materials for the future. Hence, the Group invests in new technologies and enters into collaborative research programs with universities and technical centers worldwide.
CHOMARAT offers strong technical know-how and mastery of complex technologies in fields ranging from automotive, aerospace, sports, energy, marine, construction, and also in markets requiring creativity and expertise, like luxury goods.

More information:
CHOMARAT JEC World 2018
Source:

Dorothée DAVID & Marion RISCH, AGENCE APOCOPE

CHOMARAT SIGNS A NEW DISTRIBUTION AGREEMENT WITH VELOX FOR ITS RANGE OF CARBON REINFORCEMENTS © CHOMARAT
CHOMARAT’s glass and carbon reinforcements
04.10.2017

CHOMARAT signs a new agreement with VELOX

  • CHOMARAT signs a new distribution agreement with VELOX for its range of carbon reinforcements

The international textile group CHOMARAT announced the signing of a distribution agreement with VELOX, a European distributor in the market for composite materials. The partnership agreement covers the distribution of CHOMARAT reinforcements for high-performance (carbon) composites, in France, Italy, and the United Kingdom, as well as the distribution of CHOMARAT’s complete range of carbon and glass reinforcements in Turkey.

Stepping up the distribution of CHOMARAT´s carbion ranges in Europe

This new partnership will enable CHOMARAT to extend its network in France, Italy and the United Kingdom for its carbon fabric and multiaxial ranges, by offering its customers optimum, locally based services in line with the Group’s development strategy for high-performance composites in Europe.

CHOMARAT’s compete glass and carbon range is now distributed in Turkey

  • CHOMARAT signs a new distribution agreement with VELOX for its range of carbon reinforcements

The international textile group CHOMARAT announced the signing of a distribution agreement with VELOX, a European distributor in the market for composite materials. The partnership agreement covers the distribution of CHOMARAT reinforcements for high-performance (carbon) composites, in France, Italy, and the United Kingdom, as well as the distribution of CHOMARAT’s complete range of carbon and glass reinforcements in Turkey.

Stepping up the distribution of CHOMARAT´s carbion ranges in Europe

This new partnership will enable CHOMARAT to extend its network in France, Italy and the United Kingdom for its carbon fabric and multiaxial ranges, by offering its customers optimum, locally based services in line with the Group’s development strategy for high-performance composites in Europe.

CHOMARAT’s compete glass and carbon range is now distributed in Turkey

One component of the agreement deals with the distribution of CHOMARAT’s complete range of glass and carbon reinforcements in Turkey, where the composite market is booming, in particular in the transportation sector. Relying on VELOX’s strong foothold in the Turkish market, CHOMARAT will build up its flagship ROVICORE™ line, the first glass-fibre-reinforced sandwich reinforcement, which was designed and developed by CHOMARAT for closed-mould processes. “The idea is to step up our glass activities and still offer our customers more flexibility over the entire range of our reinforcements,” explains Vincent CHOLVY, in charge of the Turkish market at CHOMARAT.

VELOX secures its position as an “innovation distributor”

By distributing CHOMARAT’s high-performance composites, Velox will develop its offering in the transportation, sports & leisure and boating sectors. According to Serge GRADYS, Manager of the VELOX Composites Business, “in Europe, the distribution of the CHOMARAT range of carbon multiaxial range with C-WeaveTM and C-PlyTM, gives us a real competitive advantage and enables us to maintain our position as an innovation distributor. The same is true for the carbon and glass ranges distributed in Turkey!”