From the Sector

Reset
67 results
Photo: Mark Stebnicki, pexels
16.08.2022

USDA presents new study of Chinese Cotton Textile Industry

  • Growing geographic separation between cotton production and textile manufacturing since the 1990s

The United States Department of Agriculture (USDA) released a comprehensive study about Chinese cotton in August 2022. The authors, Fred Gale and Eric Davis, concentrate on textiles, imports and Xinjiang.

China is the world’s largest textile manufacturer and the largest cotton consumer, but changes in China’s economy are reshaping the geography of its cotton-textile sector. Nearly all of China’s cotton is produced in the Xinjiang Uyghur Autonomous Region (XUAR), also known more simply as Xinjiang.

  • Growing geographic separation between cotton production and textile manufacturing since the 1990s

The United States Department of Agriculture (USDA) released a comprehensive study about Chinese cotton in August 2022. The authors, Fred Gale and Eric Davis, concentrate on textiles, imports and Xinjiang.

China is the world’s largest textile manufacturer and the largest cotton consumer, but changes in China’s economy are reshaping the geography of its cotton-textile sector. Nearly all of China’s cotton is produced in the Xinjiang Uyghur Autonomous Region (XUAR), also known more simply as Xinjiang.

Their study reviewed the regional patterns of China’s cotton textile industry development and identified growing geographic separation between cotton production and textile manufacturing since the 1990s using data from Chinese sources. The study investigated spatial patterns of demand for imported cotton by analyzing lists of Chinese companies applying for a share of the import quota from 2016 to 2022. Multiple regression analysis was used to control for potentially confounding influences when investigating whether companies in coastal provinces were more likely to use imported cotton than similarly sized companies in other regions.

Textile manufacturers — the main consumers of cotton — are concentrated in coastal and central regions where the share of China’s cotton production fell from over 50 percent to 10 percent during 2011–21. These geographic changes are a factor influencing global trade in cotton and textiles. Additionally, the use of forced labor in Xinjiang attracted more attention to the industry, prompting the United States and other countries to ban products produced in the region.

This study reviews the economic, geographic, and policy factors reshaping the industry and influencing the global trade of cotton and textile products. The study also examines data on Chinese companies applying for a share of China’s cotton import quota to gain insight about the demand for imported cotton.

China became the world’s largest producer, consumer, and importer of cotton soon after joining the World Trade Organization (WTO) in 2001. Despite adopting a tariff-rate quota (TRQ) system for cotton imports and issuing supplemental quotas in most years, the large number of cotton goods manufacturers that request shares of the quota suggests demand for imported cotton exceeds  the quota.

While the TRQ was intended to protect China’s cotton farmers, many farmers abandoned the labor-intensive crop as wages rose rapidly in many other industries and other crops produced higher returns. In response, officials encouraged cotton production in the relatively remote region of Xinjiang to prevent China from becoming reliant on imported cotton. Xinjiang growers receive a subsidy payment for cotton, and subsidies for machinery and seeds. A transportation subsidy induces textile manufacturers in eastern and central regions to purchase cotton from Xinjiang, which is about 2,200 to 2,900 miles from most of the country’s textile manufacturers. Financial support and other incentives encourage manufacturers to shift operations to Xinjiang.

Textile manufacturers in China are highly interested in importing cotton due to its lower price and quality. China imports about 20 percent of its cotton, and the United States is a chief exporter of cotton to China. While imported cotton is used in all provinces, manufacturers near the eastern seaboard show a greater propensity for imports. Nevertheless, in all regions, domestic cotton has the largest share of mill use.

Between 2016 and 2022, 1,581 companies applied for a share of the TRQ, and 265 companies applied in all 7 years. Most of these companies also applied for supplemental quotas issued with slightly higher tariffs. This large number of applicants suggests that imports could be even greater if quotas did not limit them. The operation of the quota application process is not public information, but data submitted by applicants suggests access to imported cotton is uneven. About 14 percent of applicants said imported cotton comprised over half of the cotton they used. Another 20 percent of companies requesting import quota did not use any imported cotton, suggesting that many applicants are unable to import. Textile manufacturers coped with limits on cotton imports by increasing their use of synthetic, chemical-based fibers or by importing cotton yarn. From 2000 to 2020, China’s yarn imports doubled from under 1 million metric tons to around 2 million metric tons with Vietnam supplying about 45 percent of that total in 2020.

The number of textile manufacturers in Xinjiang applying for a share of the cotton import quota rose from 37 to 68 between 2016 and 2022. However, imports constituted less than 2 percent of  the cotton Xinjiang applicants reported using—and 66 percent of them reported using no imported cotton—suggesting that applications from Xinjiang textile companies were often denied.
Analysis found that applicants in coastal provinces used more imported cotton than similarly sized applicants in other regions. Each location of a multi-plant company must apply separately for tariff-rate quotas. Textile manufacturers in Xinjiang that requested a share of the import quota included branches of some of China’s largest textile companies, but the analysis found that Xinjiang applicants used less imported cotton than similar manufacturing plants located in other regions. China’s role as a cotton importer appears to have peaked, while other countries are increasing their share of imports.

USDA baseline projections suggest that by 2030 Vietnam, Pakistan, Indonesia, Bangladesh, and Turkey will together account for 47 percent of the world’s cotton imports while China will only account for 24 percent. The study cam be downloaded from the USDA website.

More information:
cotton Cotton USA China Xinjiang
(c) DNFI
16.08.2022

DNFI: Cotton prices the highest in a decade during 2021/22

The Discover Natural Fibres Initiative DNFI published their statistical World Natural Fibre Update this month. The world production of natural fibres is estimated at 33.7 million tonnes in 2022, a slight increase compared with a preliminary 33.3 million tonnes in 2021 and 31.6 million in 2020.

The DNFI Natural Fibre Composite Price dropped 2% in July 2022 to US 219 cents/kg, compared with US 223 cents the previous month. The DNFI Composite is an average of prices in major markets for cotton, wool, jute, silk, coir fibre, and sisal, converted to US$ per kilogram and weighted by shares of world production.

The Discover Natural Fibres Initiative DNFI published their statistical World Natural Fibre Update this month. The world production of natural fibres is estimated at 33.7 million tonnes in 2022, a slight increase compared with a preliminary 33.3 million tonnes in 2021 and 31.6 million in 2020.

The DNFI Natural Fibre Composite Price dropped 2% in July 2022 to US 219 cents/kg, compared with US 223 cents the previous month. The DNFI Composite is an average of prices in major markets for cotton, wool, jute, silk, coir fibre, and sisal, converted to US$ per kilogram and weighted by shares of world production.

  • The DNFI Composite was pulled downward primarily by a 9% decline in the Eastern Market Indicator of wool prices in Australia, which fell from US$ 10.27 per kilogram in June to US$9.38 in July.
  • October cotton ICE futures (the nearby contract) finished July marginally lower, closing at 228 US cents per kilogram, compared with 229 at the end of June.
  • Prices of jute fibre in India quoted by the Jute Balers Association (JBA) at the end of July were unchanged from a month earlier, but with depreciation of the Rupee versus the dollar, calculated prices fell from 84 cents to 82 cents per kilogram.
  • Prices of silk in China equalled US$29.5 per kilogram in July 2022, coconut coir fibre in India held at US cents 21 per kilogram, and sisal in Brazil finished July at US cents 41 per kilogram.

Cotton prices were the highest in a decade during 2021/22, and world cotton production is estimated by the International Cotton Advisory Committee at 25.8 million tonnes during the 2022/23 season which began August 1, up from 25.4 million in the season just completed. Extreme drought in Texas, the largest producing state in the United States, is limiting the rise in world production that would otherwise be occurring.

World production of jute and allied fibres is estimated unchanged at 3.2 million tonnes in 2022 compared with 2021. High market prices in 2021 motivated farmers to expand planted area in both Bangladesh and India, but dry weather in jute-growing areas during June and July has undermined earlier optimistic hopes for yields. Rainfall was approximately half of normal in the city of Kolkata from early June to mid-July.

Production of coir fibre rose by an average of 18,000 tonnes per year during the past decade, and production was record high at 1.12 million tonnes in 2021. Production is expected to remain high in 2022.

Flax has also been trending upward, rising by an average of 27,000 tonnes per year, and production in 2022 is estimated to remain above one million tonnes.
World wool production is forecast up by 5% in 2022 to 1.09 million tonnes (clean), the highest since 2018. Wetter weather in the Southern Hemisphere, following eight years of drought, is allowing farmers to rebuild herds.

More information:
natural fibers DNFI
Source:

DNFI

10.08.2022

‘MADE IN BANGLADESH WEEK’: 12th -18th November 2022, Dhaka

  • Made in Bangladesh Week is organized by the Bangladesh Garment Manufacturers and Exporters Association (BGMEA) in partnership with Bangladesh Apparel Exchange (BAE)
  • A week-long event in November will showcase sustainability strides being made by Bangladesh garment makers
  • The event will host 17 physical events like - conferences, expositions, photo exhibitions, fashion runway shows, sustainable design and innovation awards, factory tours –and many more.

The Honourable Prime Minister of Bangladesh, Sheikh Hasina, will inaugurate the first ever Made in Bangladesh Week in November. The event represents a major branding exercise for Bangladesh’s burgeoning garment manufacturing industry as it looks to position itself as the first-choice apparel sourcing hub for global fashion retailers.

It is the first branding event of the Bangladesh Apparel Industry dedicated solely to celebrating and showcasing the newest innovations, compliance, and sustainable developments of the RMG sector in the global market.

  • Made in Bangladesh Week is organized by the Bangladesh Garment Manufacturers and Exporters Association (BGMEA) in partnership with Bangladesh Apparel Exchange (BAE)
  • A week-long event in November will showcase sustainability strides being made by Bangladesh garment makers
  • The event will host 17 physical events like - conferences, expositions, photo exhibitions, fashion runway shows, sustainable design and innovation awards, factory tours –and many more.

The Honourable Prime Minister of Bangladesh, Sheikh Hasina, will inaugurate the first ever Made in Bangladesh Week in November. The event represents a major branding exercise for Bangladesh’s burgeoning garment manufacturing industry as it looks to position itself as the first-choice apparel sourcing hub for global fashion retailers.

It is the first branding event of the Bangladesh Apparel Industry dedicated solely to celebrating and showcasing the newest innovations, compliance, and sustainable developments of the RMG sector in the global market.

The event aims to promote the apparel industry of Bangladesh locally and globally by showcasing the compelling stories of the ready-made garments sector, especially its impressive strides in the areas of workplace safety, environmental sustainability and workers’ wellbeing.

The event is expected to draw a gathering of more than a thousand people from home and abroad, including key stakeholders in the local and global fashion industry.

Bangladesh’s garment manufacturing industry has undergone a renaissance in recent times. Significant strides have been made in technological innovation, eco-friendly production, worker welfare and factory safety.

In addition to panels, seminars, awards, fashion shows and exhibitions, the week will also provide an opportunity for factory tours to give journalists and other stakeholders a chance to see for themselves innovative garment production in Bangladesh.

Made in Bangladesh Week will be organised by the Bangladesh Garment Manufacturers and Exporters Association (BGMEA) in partnership with Bangladesh Apparel Exchange (BAE).

More information:
Bangladesh
Source:

Bangladesh Apparel Exchange (BAE)

13.07.2022

Cotton Market Fundamentals & Price Outlook – July 22

SUPPLY, DEMAND, & TRADE
The latest USDA report featured reductions to figures for both world production and mill-use for both the 2021/22 and 2022/23 crop years.  For 2021/22, the global production estimate was lowered -0.7 million bales (to 116.2 million) and global consumption was lowered -1.9 million bales (to 119.8 million).  For 2022/23, the global production forecast was lowered -1.2 million bales (to 120.7 million) and global consumption was lowered -1.6 million bales (to 119.9 million).

With the decreases in use exceeding the declines in production, figures for global ending stocks increased.  For 2021/22, the projection rose +1.1 million bales (to 84.0 million).  For 2022/23, the forecast increased +1.6 million bales (to 84.3 million).

At the country-level, the largest changes to 2021/22 production were for Brazil (-400,000 bales to 12.3 million) and Uzbekistan (-100,00 bales to 2.7 million).  The largest changes for the 2022/23 harvest were for the U.S. (-1.0 million bales to 15.5 million) and Brazil (-200,000 bales to 13.0 million).

SUPPLY, DEMAND, & TRADE
The latest USDA report featured reductions to figures for both world production and mill-use for both the 2021/22 and 2022/23 crop years.  For 2021/22, the global production estimate was lowered -0.7 million bales (to 116.2 million) and global consumption was lowered -1.9 million bales (to 119.8 million).  For 2022/23, the global production forecast was lowered -1.2 million bales (to 120.7 million) and global consumption was lowered -1.6 million bales (to 119.9 million).

With the decreases in use exceeding the declines in production, figures for global ending stocks increased.  For 2021/22, the projection rose +1.1 million bales (to 84.0 million).  For 2022/23, the forecast increased +1.6 million bales (to 84.3 million).

At the country-level, the largest changes to 2021/22 production were for Brazil (-400,000 bales to 12.3 million) and Uzbekistan (-100,00 bales to 2.7 million).  The largest changes for the 2022/23 harvest were for the U.S. (-1.0 million bales to 15.5 million) and Brazil (-200,000 bales to 13.0 million).

It may be notable that there were no upward country-level revisions for mill-use in either 2021/22 or 2022/23.  The largest revisions for 2021/22 included those for China (-1.0 million to 37.0 million), Vietnam (-400,000 bales to 6.9 million), Bangladesh (-300,000 to 8.0 million), Pakistan (-100,000 bales to 10.9 million), and Uzbekistan (-100,000 bales to 2.7 million).  For 2022/23, consumption estimates were lowered for China (-500,000 bales to 37.5 million), India (-500,000 bales to 25.0 million), Bangladesh (-300,000 bales to 8.6 million), and Vietnam (-300,000 bales to 7.1 million).
The global trade forecast for 2022/23 was lowered -1.1 million bales (to 46.4 million).  The most significant changes on the import side included those for China (-500,000 bales to 10.0 million), Bangladesh (-300,000 bales to 8.5 million), and Vietnam (-300,000 bales to 7.2 million).  On the export side, the largest updates included those for the U.S. (-500,000 bales to 14.0 million) and Australia (+300,000 bales to 6.0 million).
 
PRICE OUTLOOK
Recent volatility was not limited to the cotton market.  A wide range of commodities lost significant value in June.  Between June 9th and July 5th (dates chosen unsystematically to describe the magnitude of declines), cotton fell -25% (NY/ICE December futures), corn fell -19% (Chicago Board of Trade, December contract), soybeans fell -17% (Chicago Board of Trade, November contract), wheat fell -25% (Chicago Board of Trade, December contract), copper fell -20% (London Metal Exchange, nearby), and Brent crude oil fell -12% (ICE, nearby).

The breadth of losses throughout the commodity sector suggests a sea change in investor sentiment for the entire category.  The effects of inflation, the withdrawal of stimulus, rising interest rates, and concerns about a possible recession could all be reasons explaining a reversal of speculative bets, and all could be contributors to the losses.  While the macroeconomic environment can be expected to continue to weigh on prices, there are also supportive forces for the market that are specific to cotton.

The current USDA forecast for U.S. cotton production is 15.5 million bales, and it may get smaller over time because of the severe drought in West Texas.  The current harvest figure is two million bales lower than the 2021/22 number and is equal to the five-year average for U.S. cotton exports (2017/18-2021/22).  On top of exports, the U.S. will need to supply domestic mills with 2.5 million bales.  The last time the U.S. had a severely drought-impacted crop (2020/21), the harvest was only 14.6 million bales.  In that crop year, the U.S. was able to export more than it grew because it had accumulated stocks in the previous year.  The U.S. is coming into the 2022/23 crop year with low stocks.  This suggests U.S. shipments may have been rationed.  Since the U.S. is the world’s largest exporter, this may lend some support to prices internationally.

More information:
cotton Cotton USA Cotton Inc.
Source:

Cotton Incorporated

13.06.2022

ITM 2022: Bringing Textile Technology Leaders Together

ITM 2022, the first major international textile machinery exhibition to be held in the world after a 3-year hiatus during the pandemic process, is getting ready to open its doors. Bringing the leading brands of textile technologies together in Istanbul, ITM 2022 will host world launches and numerous collaborations for 5 days.

ITM 2022- International Textile Machinery Exhibition, organized in partnership with Teknik Fairs Inc. and Tüyap Tüm Fuarcılık Yapım Inc, will open its doors at Tüyap Fair and Congress Center between 14-18 June. For ITM 2022, which will be held in 12 halls on an area of 120,000 m2; hums of 1280 participating companies from more than 40 countries continues. Tüyap Fairground, where thousands of people sweat for stand setups, is getting ready for the big meeting. ITM 2022, where all halls have reached 100% occupancy rate and 1280 exhibitor companies are located, will also attract attention with the stand areas and machine parks that the manufacturers have enlarged compared to the previous exhibitions.

ITM 2022, the first major international textile machinery exhibition to be held in the world after a 3-year hiatus during the pandemic process, is getting ready to open its doors. Bringing the leading brands of textile technologies together in Istanbul, ITM 2022 will host world launches and numerous collaborations for 5 days.

ITM 2022- International Textile Machinery Exhibition, organized in partnership with Teknik Fairs Inc. and Tüyap Tüm Fuarcılık Yapım Inc, will open its doors at Tüyap Fair and Congress Center between 14-18 June. For ITM 2022, which will be held in 12 halls on an area of 120,000 m2; hums of 1280 participating companies from more than 40 countries continues. Tüyap Fairground, where thousands of people sweat for stand setups, is getting ready for the big meeting. ITM 2022, where all halls have reached 100% occupancy rate and 1280 exhibitor companies are located, will also attract attention with the stand areas and machine parks that the manufacturers have enlarged compared to the previous exhibitions.

Companies will showcase their state-of-the-art technologies for the first time at ITM 2022
Many companies that focus on product development and new productions under pandemic conditions will have the opportunity to introduce their products to their customers for the first time in 3 years at the ITM 2022 Exhibition. Company owners, managers, employees and sector representatives visiting the exhibition will have the opportunity to see the latest technological innovations for the first time and witness their world launches.

Sector representatives, who will open up new horizons in their minds about textile technologies, will sign new products by transforming the extraordinary and original ideas that they have obtained at the ITM 2022 Exhibition into design. Participating companies will also update their machines in line with the demands and needs from the sector representatives and lead the development of new technologies.

Significant Contribution to Exports Aimed with Machine Sales and New Investment Decisions
The textile industry, which is among the locomotive sectors in Turkey's exports, has made a significant contribution to the Turkish economy, especially with the performance increase it has achieved during the pandemic period. Having achieved an increase of up to 40 percent in its exports of textiles and raw materials, Turkey also managed to increase its exports of medical textiles, technical textiles and home textiles. The industry will further increase this success with the collaborations to be realized at ITM 2022. The textile machinery industry will gain great momentum with the machinery sales and new investment decisions to be made at the exhibition.

ITM 2022, which will be attended by many domestic and foreign companies and visited by thousands of people, will be an organization where both domestic and foreign companies will make sales amounting to millions of Euros and many business connections will be realized.

Intense Interest from Trade Delegations
Trade delegations from dozens of countries are requesting to attend the ITM 2022 Exhibition, which is included in the ‘Domestic Organizations Covered by State Incentives’ list by the Ministry of Commerce. Bangladesh, India, Iran, Serbia, Czech Republic, Pakistan, Indonesia, Ethiopia, Malaysia, Mexico, Egypt and Vietnam are among the countries that requested procurement delegations. The intense application of visitors to consulates and commercial attachés from all over the world clearly reveals that ITM 2020 will host a large number of visitors.

ITM 2022 Exhibition Prepares to Break Both Exhibitor and Visitor Records
Company owners, company representatives and visitors left the 2018 edition of the ITM Exhibition very satisfied. ITM 2018 Exhibition, attended by 1150 companies and company representatives from 64 countries and visited by approximately 60 thousand people from 94 countries made a significant contribution to the export records of the textile industry that year. At the ITM 2022; It is getting ready to break new records with the number of participants and visitors coming from Turkey and abroad.

Technical Textiles and Nonwovens Industry Will Meet at HIGHTEX 2022 Exhibition
On the other hand, HIGHTEX 2022 Exhibition, which will be held simultaneously with the ITM 2022 Exhibition, will be an exhibition where Nonwoven products, raw materials used in their production and the state-of-the-art technologies will be exhibited. HIGHTEX 2022 Exhibition, which is the first and only in its field in Turkey, will host a record number of participants and visitors in parallel with the increase in demand for technical textiles. At the HIGHTEX 2022 Exhibition, companies operating in many sectors, from medical textiles to hygienic textiles, from agricultural textiles to geotextiles, will exhibit their latest products and production technologies. Nonwoven manufacturers will come together with the global players of the sector and have the opportunity to both invest in technology and introduce their newest products.

More information:
ITM
Source:

ITM

Sustainable Apparel Forum (SAF) organized in Dhaka to Accelerate Apparel Sustainability in Post-Covid (c) Bangladesh Apparel Exchange
Hall View Sustainable Apparel Forum
18.05.2022

News from Sustainable Apparel Forum (SAF)

  • Sustainable Apparel Forum (SAF) organized in Dhaka to Accelerate Apparel Sustainability in Post-Covid

Policy makers, industry leaders, brands’ representatives and fashion campaigners from home and abroad gathered in Dhaka yesterday to accelerate momentum of sustainability in Bangladesh apparel industry.

More than 50 speakers as well as 20 green growth exhibitors from over 20 countries participated in the 3rd edition of Sustainable Apparel Forum (SAF) organized by Bangladesh Apparel Exchange (BAE) partnering with Bangladesh Garment Manufacturers & Exporters Association (BGMEA).

Five plenary sessions on ‘Demystifying Climate Action’, ‘Purchasing Practice’, ‘ESG (Environmental, Social & Governance) & Green Finance’, ‘Closing the Loop: Circular Economy in the Fashion Industry’, and ‘Due Diligence and Legislation’ held at the SAF along with an opening plenary and a closing plenary.  

  • Sustainable Apparel Forum (SAF) organized in Dhaka to Accelerate Apparel Sustainability in Post-Covid

Policy makers, industry leaders, brands’ representatives and fashion campaigners from home and abroad gathered in Dhaka yesterday to accelerate momentum of sustainability in Bangladesh apparel industry.

More than 50 speakers as well as 20 green growth exhibitors from over 20 countries participated in the 3rd edition of Sustainable Apparel Forum (SAF) organized by Bangladesh Apparel Exchange (BAE) partnering with Bangladesh Garment Manufacturers & Exporters Association (BGMEA).

Five plenary sessions on ‘Demystifying Climate Action’, ‘Purchasing Practice’, ‘ESG (Environmental, Social & Governance) & Green Finance’, ‘Closing the Loop: Circular Economy in the Fashion Industry’, and ‘Due Diligence and Legislation’ held at the SAF along with an opening plenary and a closing plenary.  

(c) Officina39
10.05.2022

Officina39 returns to Bangladesh Denim Expo with latest sustainable developments

Officina39 will attend the Bangladesh Denim Expo in Dhaka on 10-11 May, a new edition after a two-year break, characterized by a focus on sustainability and the central theme "Beyond Business".

Officina39 has been committed for years to the reconversion of the sector’s technologies to an environmental point of view: this attitude is expressed in its latest Trustainable™ collection FW 23, based on the approach of honesty, transparency and social responsibility that drives the company. Officina39 will present Aqualess Fade, a technology just recently presented at Kingpins that recreates the bleaching effect of chlorine on fabrics, a waterless special compound for the discoloration of denim on indigo/black garments which is reducing resource consumption and environmental impact.

Officina39 will attend the Bangladesh Denim Expo in Dhaka on 10-11 May, a new edition after a two-year break, characterized by a focus on sustainability and the central theme "Beyond Business".

Officina39 has been committed for years to the reconversion of the sector’s technologies to an environmental point of view: this attitude is expressed in its latest Trustainable™ collection FW 23, based on the approach of honesty, transparency and social responsibility that drives the company. Officina39 will present Aqualess Fade, a technology just recently presented at Kingpins that recreates the bleaching effect of chlorine on fabrics, a waterless special compound for the discoloration of denim on indigo/black garments which is reducing resource consumption and environmental impact.

Aqualess Fade completes and integrates Aqualess Mission, a combination of technologies that allows garment laundry processes to reduce 75% of the water use. Until now, the process included three eco-friendly technologies: Novascraper Indigo, a laser finishing technique that adds a natural, vintage look to denim garments; OZ-ONE Powder, an advanced product to give garments a bleached yet eco-friendly treatment, for a worn and distressed look; and Aqualess Aged, a waterless compound to give denim abrasion effects. Specifically, this last revolutionizing product has recently marked an important achievement which adds to the company’s sustainable credentials: Officina39 received, for its Aqualess Aged, the DeniSafe® certification of enzyme product(s) by Novozymes for safe production and safe use through dry application.

Bangladesh Denim Expo is also ideal for presenting the results of The Circle Book 2, the second chapter of a collective project gathering ten high-profile players of the textile supply chain. Officina39’s Recycrom™ technology and the expertise of Meidea, Lenzing, Tejidos Rojo, Calik Denim, Ribbontex, Spring85, Dr. Bock Industries, Crafil and RGT have merged together on the development of CULTURE.IN, a circular capsule collection transparently made from recycled and degradable materials: a practical demonstration of how the fashion industry can improve considering social and environmental impacts and goals.

Source:

Officina39 / Menabò Group srl

(c) ITM, Teknik Fairs INC
06.05.2022

The countdown for ITM 2022 has begun

Organized by the partnership of Tüyap Fairs and Exhibitions Organization Inc. and Teknik Fairs Inc., the ITM 2022 International Textile Machinery Exhibition will be held at Istanbul Tüyap Fair and Congress Center on 14-18 June 2022. Hundreds of domestic and international exhibitors are looking forward to presenting their newest technologies for the first time at the ITM 2O22 Exhibition. Leading textile machinery manufacturers, global sector investors, and professional visitors are planning to come to the ITM 2022 Exhibition to examine the latest technologies closely.

Trade committees from dozens of countries are requesting to attend the ITM 2022 Exhibition, which is included in the ‘Domestic Organizations Covered by State Incentives’ list by the Ministry of Commerce. Bangladesh, India, Iran, Serbia, Czech Republic, Pakistan, Indonesia, Ethiopia, Malaysia, Mexico, Egypt and Vietnam are among the countries that requested procurement delegations.

Organized by the partnership of Tüyap Fairs and Exhibitions Organization Inc. and Teknik Fairs Inc., the ITM 2022 International Textile Machinery Exhibition will be held at Istanbul Tüyap Fair and Congress Center on 14-18 June 2022. Hundreds of domestic and international exhibitors are looking forward to presenting their newest technologies for the first time at the ITM 2O22 Exhibition. Leading textile machinery manufacturers, global sector investors, and professional visitors are planning to come to the ITM 2022 Exhibition to examine the latest technologies closely.

Trade committees from dozens of countries are requesting to attend the ITM 2022 Exhibition, which is included in the ‘Domestic Organizations Covered by State Incentives’ list by the Ministry of Commerce. Bangladesh, India, Iran, Serbia, Czech Republic, Pakistan, Indonesia, Ethiopia, Malaysia, Mexico, Egypt and Vietnam are among the countries that requested procurement delegations.

The ITM 2022 Exhibition is of great importance for Turkish textile machinery and accessories manufacturers to increase their competitiveness in exports and to sign collaborations that will result in worldwide exports. Leading textile technology brands, which focus on product development and new productions during the pandemic conditions, are looking forward to the ITM 2022 Exhibition to present their products to the market and introduce them to their customers face to face. More than 300 manufacturers will make the world launches of their latest technological innovations at the ITM 2022 Exhibition.

Source:

ITM, Teknik Fairs INC

(c) Bangladesh Apparel Exchange (BAE)
25.04.2022

The Sustainable Apparel Forum brings together government representatives and industry leaders

The Sustainable Apparel Forum takes place on 10 May 2022 in Dhaka, Bangladesh, bringing together government ministers and advisors, the European Union, UN bodies, brands, global fashion campaigners, brands, manufacturers and industry leaders.

This year’s SAF, the third such event, aims to establish Bangladesh as one of the world’s most responsible apparel sourcing destinations. That’s why senior government representatives will be speaking and in attendance, listening to the needs of industry and what needs to be done to take Bangladesh garment production to the next level.

Senior representatives from globally renowned recycling and renewable energy companies will also be in attendance as well as exhibit their sustainability and green technologies, products and solutions under the same roof.

The SAF will showcase opportunities for much-needed green financing in the industry.
Issues under the spotlight will include climate action, environmental social & governance (ESG) and green finance, purchasing practices, circular economy, and regulatory reforms.

The Sustainable Apparel Forum takes place on 10 May 2022 in Dhaka, Bangladesh, bringing together government ministers and advisors, the European Union, UN bodies, brands, global fashion campaigners, brands, manufacturers and industry leaders.

This year’s SAF, the third such event, aims to establish Bangladesh as one of the world’s most responsible apparel sourcing destinations. That’s why senior government representatives will be speaking and in attendance, listening to the needs of industry and what needs to be done to take Bangladesh garment production to the next level.

Senior representatives from globally renowned recycling and renewable energy companies will also be in attendance as well as exhibit their sustainability and green technologies, products and solutions under the same roof.

The SAF will showcase opportunities for much-needed green financing in the industry.
Issues under the spotlight will include climate action, environmental social & governance (ESG) and green finance, purchasing practices, circular economy, and regulatory reforms.

Speakers of the SAF include Dr Tawfiq-e-elahi Chowdhury, Bir Bikrom, adviser to the Prime Minister of Bangladesh on power, energy and mineral resources; Salman F Rahman, MP, adviser to the Prime Minister of Bangladesh on private industry & investment; Tipu Munshi, MP, commerce minister of Bangladesh; Begum Monnujan Sufian, MP, state minister for labor and employment of Bangladesh; Saber Hossain Chowdhury, MP, chairman of parliamentary standing committee on ministry of environment, forest and climate change of Bangladesh;  Anna Athanasopoulou, head of unit for social economy & creative industries European Commission;  Barbara Bijelic, financial sector and regulatory engagement lead centre for responsible business conduct, OECD;  Lindita Xhaferi-Salihu, sectors engagement lead, UNFCCC; Gagan Bansal, global material innovation & strategy manager, H&M; Javier Santonja Olcina,  regional head, Bangladesh & Pakistan, Inditex; Faruque Hassan, president, Bangladesh Garment Manufacturers & Exporters Association (BGMEA); Dr Mark Anner, founding director, Center for Global Workers’ Rights and also professor, Penn State University, USA; Ayesha Barenblat, founder and CEO, Remake;  Najet Draper, vice president research, Better Buying; and  Tuomo Poutiainen,  country director, Bangladesh, ILO.

Source:

Bangladesh Apparel Exchange (BAE)

(c) Eton
22.04.2022

More localised and automated textile manufacturing with TMAS technologies

At the forthcoming Texprocess, Techtextil and Heimtextil shows taking place in Frankfurt from June 21-24 – members of the Swedish Textile Machinery Association TMAS will be showcasing a range of solutions aligning with the growing trend for more localised and automated textile manufacturing.

Digitalisation and the push for more sustainable, shorter and less expensive supply chains are currently making manufacturing in high-cost countries within Europe more attractive and there have been many other contributing factors to this over the past two years.

The Covid-19 pandemic exposed the vulnerability of many countries to shortages of essential items like PPE while at the same time making the full exploitation of new digital options essential during national lock-downs and long periods of restricted travel. The escalating cost of global transportation, as well as the growth of online retailing and the associated benefits of on-demand digital manufacturing, are further reinforcing the many benefits of short-run and near-shore new operations.

At the forthcoming Texprocess, Techtextil and Heimtextil shows taking place in Frankfurt from June 21-24 – members of the Swedish Textile Machinery Association TMAS will be showcasing a range of solutions aligning with the growing trend for more localised and automated textile manufacturing.

Digitalisation and the push for more sustainable, shorter and less expensive supply chains are currently making manufacturing in high-cost countries within Europe more attractive and there have been many other contributing factors to this over the past two years.

The Covid-19 pandemic exposed the vulnerability of many countries to shortages of essential items like PPE while at the same time making the full exploitation of new digital options essential during national lock-downs and long periods of restricted travel. The escalating cost of global transportation, as well as the growth of online retailing and the associated benefits of on-demand digital manufacturing, are further reinforcing the many benefits of short-run and near-shore new operations.

Secure supply
At Texprocess, for example, Eton Systems will be unveiling its latest Ingenious software solution which further enhances the company’s Opta Unit Production System (UPS) introduced in 2021.

“Our automated technology has already had a great impact on the productivity of thousands of garment production lines,” says Eton’s Managing Director Jerker Krabbe. “Our systems help producers across the world to reduce repetitive manual tasks and increase efficiency, which evens out some of the differences between production in high and low-cost countries, making reshoring a feasible option. Creating a diversified production portfolio with a mix of production facilities, some closer to home, makes for a more secure product supply.”

Flexibility
Imogo meanwhile recently installed the first industrial scale dyeing system in Sweden for many years. The Dye-Max spray dyeing line has the potential to slash the use of fresh water, wastewater, energy and chemicals by as much as 90% compared to conventional jet dyeing systems. It is capable of carrying out the application of a wide range of fabric pre-treatments and finishing processes, providing users with unbeatable flexibility in production.

“Here in Scandinavia, we are currently seeing an explosion of companies developing sustainable new cellulosic fibres – many from waste clothing – but a problem is that all of the environmental benefits they deliver can potentially be lost in the further processing, and especially in conventional dyeing,” observes the company’s Founding Partner Per Stenflo. “The Dye-Max system positively addresses this, but interest in it has not just been confined to Europe. We are currently seeing a lot of activity in Turkey – largely as a near-shore partner to European brands – but also in Bangladesh.”

Robotics at Heimtextil
ACG Kinna Automatic specialises in automation solutions for filled products such as quilts, pillows and mattresses and its live demonstrations of robotics in action have proved a magnet for visitors to Heimtextil. This year’s show will be no exception.

“The use of robotics is now standard across many industries dealing in solid goods, but the handling of soft materials such as textiles is a little more complex,” says Managing Director Christian Moore. “Nevertheless, it’s something we have successfully mastered, and our robotic systems are proving highly beneficial to their users. There is no ‘one-size-fits-all’ solution when it comes to automation and our approach is always to carefully examine where it will make the difference in each bespoke system. A focus is on identifying and eliminating bottlenecks which will increase product flows.”

During the Covid-19 pandemic, ACG Kinna drew on all of its automation know-how and extensive network of contacts to build a new nonwovens fabric converting and single-use garment making-up plant in a matter of weeks, in order to supply the Swedish authorities with urgently-needed medical gowns.

Instant colour
Localised textile production is also booming in the USA, where Coloreel has recently secured multiple orders for its instant thread colouration technology via its US partner Hirsch.

“Coloreel technology enables the high-quality and instant colouring of a textile thread while it is actually being used in production and can be paired with any existing embroidery machine without modification, while also making it possible to produce gradients in an embroidery for the first time,” explains VP of Sales Sven Öquist.

“Advanced rapid colour formulation software and high-speed drive technology allow a single needle to carry out what it previously required many multiples of them to do – and with much more consistent stitch quality. By instantly colouring a recycled white base thread during production, our system enables complete freedom to create unique embroideries without any limitations. Colour changes along the thread can either be made rapidly from one solid colour to another, or gradually, to make smooth transitions or any colouring effect desired. This provides big benefits when it comes to sustainability and design creativity.”

Milestone
Svegea will be promoting its latest EC 300 collarette cutting machine at Texprocess 2022. This machine is used by garment manufacturers around the world for the production of tubular apparel components such as waistbands, cuff and neck tapes and other seam reinforcements. With its E-Drive 2 system and fully automatic FA500 roll slitter, the EC 300 has an output of around 20,000 metres per hour.

“Advances in automation are only making the specialised, bespoke machines we engineer even more efficient and we are expecting a very busy year,” says Managing Director Håkan Steene. “The garment components our collarette cutters produce make it logical for them to be integrated into the operations of making-up operations, wherever they are.”

Sensors
The advanced yarn tension monitoring technologies of Eltex of Sweden meanwhile play an essential role in rectifying defects in  weaving, tufting and composite reinforcement operations.

“A correct tension of the warp and weft threads ensures proper machine operation,” explains Eltex Global Marketing and Sales Manager Anoop K. Sharma “The constant tension monitoring and automatic control of the tension of the thread help to overcome unnecessary problems.

“We continue to make advances in both the hardware and software of our tension monitoring systems, such as the EyE™ for the warping process. With the EyE™, the yarn tension values from all yarns are continuously updated and displayed on screen. In addition, tension values outside the warning level are indicated both on the sensor’s LEDs and on the screen for complete quality control. No fabric can be woven without the appropriate and correct tension.”

Source:

AWOL Media

(c) Denim Expert Ltd
09.04.2022

Bangladesh Denim Expo re-opens its doors with theme “Beyond Business”

  • Renowned global denim event goes live again after two years
  • Bangladesh Denim Expo brings together the global denim supply chain
  • The show has a sustainability focus, and a central theme of ‘Beyond Business’
  • Bangladesh is the 2nd largest denim exporter to the EU and the third largest to the United States

After a two-year break, Bangladesh Denim Expo will once again open its doors in the international Convention City, Bashundhara (ICCB) in Dhaka on May 10th & 11th 2022. The event is now firmly established as one of the world’s leading denim trade shows, and its live return is a huge boost to the global denim manufacturing sector.

“Beyond Business” is the theme of the 12th edition of the show. Bangladesh Denim Expo addresses the new opportunities for successful & sustainable business, in a world that now demands that industry leaders to go “Beyond Business.”

79 Exhibitors are set to attend the event, consisting of both local and international participants.

  • Renowned global denim event goes live again after two years
  • Bangladesh Denim Expo brings together the global denim supply chain
  • The show has a sustainability focus, and a central theme of ‘Beyond Business’
  • Bangladesh is the 2nd largest denim exporter to the EU and the third largest to the United States

After a two-year break, Bangladesh Denim Expo will once again open its doors in the international Convention City, Bashundhara (ICCB) in Dhaka on May 10th & 11th 2022. The event is now firmly established as one of the world’s leading denim trade shows, and its live return is a huge boost to the global denim manufacturing sector.

“Beyond Business” is the theme of the 12th edition of the show. Bangladesh Denim Expo addresses the new opportunities for successful & sustainable business, in a world that now demands that industry leaders to go “Beyond Business.”

79 Exhibitors are set to attend the event, consisting of both local and international participants.

In this edition exhibitors will display fabrics, garments, threads, machinery, finishing equipment and accessories, positioning the show as a true representation of Bangladesh’s denim industry - the second largest denim exporter to the EU and third largest to the United States.

Through a series of product displays, seminar sessions & panel discussions, the Expo will encourage robust debate and interaction among exhibitors and visitors.

8 seminar sessions conducted by exhibitors at the two days event, and two panel discussions, reflecting the overriding sustainability theme of this edition of the Expo.

Industry experts will gather to discuss how the denim industry can improve, not only from a business perspective, but also considering social and environmental impacts and goals.

Source:

Denim Expert Ltd

(c) OETI
16.03.2022

OETI: Opening of sales offices in India and Bangladesh

OETI - Institute for Ecology, Technology and Innovation’ offers as a worldwide accredited and notified centre of excellence testing and certification services. The company specialises in textiles, leather, personal protective equipment (PPE), floor coverings and interior furnishing materials. It also assesses indoor air quality.  As a founding member of the OEKO-TEX® community (1992) and official OEKO-TEX® testing institute, OETI also comprises the entire OEKO-TEX® product portfolio.

OETI - Institute for Ecology, Technology and Innovation’ offers as a worldwide accredited and notified centre of excellence testing and certification services. The company specialises in textiles, leather, personal protective equipment (PPE), floor coverings and interior furnishing materials. It also assesses indoor air quality.  As a founding member of the OEKO-TEX® community (1992) and official OEKO-TEX® testing institute, OETI also comprises the entire OEKO-TEX® product portfolio.

Between its own international branches and the branches of OETI’s Swiss parent company TESTEX AG, OETI’s network of locations spans several continents. Recently, two more branches have been added in India and Bangladesh: Headquartered in Coimbatore/Tamil Nadu, OETI India is managed by Vignesh Amalraj, who has decades of experience in the textile and apparel industry for testing, inspection, certification, auditing, product safety, training and sustainability management. The second location was recently opened in Dhaka, Bangladesh. The responsible Country Manager, Mohiuddin Sheek, is an expert in the areas of testing, auditing, certification, product safety, training, consulting and business development.

More information:
OETI
Source:

OETI

16.02.2022

"European textile industry needs to grow its role on global markets"

Statement

On the occasion of the EU-Africa Business Summit, EURATEX is re-iterating the ambition of the European textile industry to grow its role on global markets, including the African continent.

The textile ecosystem is considered the 2nd most globalised sector of the European economy ; it is built on globalised supply chains and fierce competition with China, US, Bangladesh, Turkey and many others. Imports are now peaking at €115 billion (ca. 60% garments and 40% textiles), with a dramatic increase of imported medical textiles (face masks) in 2020. Every year, 22 billion pieces of textile and garment products are brought into the EU Single market.

Statement

On the occasion of the EU-Africa Business Summit, EURATEX is re-iterating the ambition of the European textile industry to grow its role on global markets, including the African continent.

The textile ecosystem is considered the 2nd most globalised sector of the European economy ; it is built on globalised supply chains and fierce competition with China, US, Bangladesh, Turkey and many others. Imports are now peaking at €115 billion (ca. 60% garments and 40% textiles), with a dramatic increase of imported medical textiles (face masks) in 2020. Every year, 22 billion pieces of textile and garment products are brought into the EU Single market.

Europe’s answer to this competitive pressure must be to invest even more on quality and innovative products, made in a sustainable manner. As emerging markets evolve, the appetite for better quality, comfort and design will grow. The ability and willingness to purchase technical textiles, which offer solutions to durability and improved performance, will increase. That is where Europe can be successful. To illustrate: the EU’s exports to China have increased by 33% in 2021 (first 11 months).

In its vision paper on the future of European textiles and apparel, EURATEX has confirmed its ambition to increase the global market share of the European textile industry. Strengthening relations with nearby Turkey and North African countries is important in this regard, offering opportunities for nearshoring. The African continent at large offers trade and investment opportunities, provided the business climate is stable and transparent.

Relations with the UK and Switzerland need to be optimised; especially Brexit has caused serious damage to bilateral trade flows (-33% export to the UK during Jan-Nov 2021). The Mercosur FTA offers interesting opportunities for the European textile industry; it should be ratified as soon as possible. We need to work with the US on mutual recognition of standards and setting global environmental and social rules. We call upon India to make an honest proposal for the upcoming free trade negotiations, which will ensure full and fair access to the Indian market.

European textile and apparel companies (mostly SMEs) need to be accompanied to exploit these market opportunities. At the same time, they need to be protected from unfair competition, e.g. products who do not comply with stringent EU standards and procedures. This requires more effective market surveillance.

More information:
Euratex Competition market share
Source:

Euratex

16.11.2021

RGE: Second Annual Update on Textile Fibre Innovation and Technology

Royal Golden Eagle (RGE) has released its 2021 progress report on its commitment to invest USD200 million in next-generation textile fibre innovation and technology over a ten-year period which started in 2019.

The annual report provides an update on the activities undertaken by RGE and its business groups (Sateri, APR, APRIL, Bracell) involved in the fashion value chain to advance its ambition towards closed-loop, circular and climate-positive cellulosic fibre.

In 2021, Sateri achieved full compliance with the emission limits set out in the European Union Best Available Techniques Reference Document (EU-BAT BREF) for all of its five viscose mills in China, two years ahead of schedule. Bracell completed construction of the world’s largest and greenest new generation pulp mill in São Paulo which uses cutting-edge technology for fossil fuel-free generation.

Royal Golden Eagle (RGE) has released its 2021 progress report on its commitment to invest USD200 million in next-generation textile fibre innovation and technology over a ten-year period which started in 2019.

The annual report provides an update on the activities undertaken by RGE and its business groups (Sateri, APR, APRIL, Bracell) involved in the fashion value chain to advance its ambition towards closed-loop, circular and climate-positive cellulosic fibre.

In 2021, Sateri achieved full compliance with the emission limits set out in the European Union Best Available Techniques Reference Document (EU-BAT BREF) for all of its five viscose mills in China, two years ahead of schedule. Bracell completed construction of the world’s largest and greenest new generation pulp mill in São Paulo which uses cutting-edge technology for fossil fuel-free generation.

Amid the COVID-19 pandemic continuing to restrict travel and collaboration, RGE persisted in building upon existing partnerships, while entering into new agreements. Sateri strengthened its strategic collaboration with Infinited Fiber Company, participating in the company’s EUR30 million funding round, which attracted new and existing investors such as H&M Group, Adidas, BESTSELLER and Zalando.

New partnerships formed by RGE included a five-year textile recycling research collaboration with Nanyang Technological University Singapore, and a three-year strategic partnership with the Textile and Fashion Federation Singapore which seeks, among others goals, to advance research and innovation in circular economy approaches to fashion waste in Asia.

RGE’s in-house R&D team has made good progress in advancing its textile-to-textile project, focusing on producing quality viscose using recycled cotton textiles as feedstock. To support plans to build a textile recycling facility in Indonesia, and as part of commercial feasibility analysis, studies examining the availability of textile waste and textile recycling landscapes in China, Indonesia, Sri Lanka and Bangladesh were completed.

Sateri remains on track in developing a product with 50 per cent recycled content by 2023, and to reach 100 per cent by 2030. It also aims for 20 per cent of its feedstock to contain alternative or recycled materials by 2025. In this similar vein, APR will source 20 per cent of its feedstock from alternative or recycled materials by 2030.

Source:

RGE / Omnicom Public Relations Group

04.11.2021

JIAM 2022 OSAKA set to return and open exhibitor application

JIAM 2022 OSAKA, organised by the Japan Sewing Machinery Manufacturers Association (JASMA), will start accepting exhibitor applications for its next edition to be held from 30 November to 3 December, 2022 in the INTEX OSAKA. JIAM 2022 has decided its exhibition theme as “It all connects at JIAM -the forefront of technology and master craftsmanship” and the show will serve as a global platform for the resolution of issues required in this era of change. The 2022 edition will be providing solutions catered to each and every needs by combining existing high-level skillsets that has survived the drastic market change in the past, with the latest technology that has built on knowledge and the history.
 
JIAM, one of the world's leading sewing equipment trade fairs, is an international trade fair that brings together cutting-edge technologies, products, and services from domestic and overseas manufacturers. The previous edition of JIAM 2016 welcomed 258 exhibitors from 15 countries and regions as well as 15,257 visitors from 72 countries and regions, mainly from Bangladesh, China, India, Korea, Taiwan, Sri Lanka, and Vietnam.

JIAM 2022 OSAKA, organised by the Japan Sewing Machinery Manufacturers Association (JASMA), will start accepting exhibitor applications for its next edition to be held from 30 November to 3 December, 2022 in the INTEX OSAKA. JIAM 2022 has decided its exhibition theme as “It all connects at JIAM -the forefront of technology and master craftsmanship” and the show will serve as a global platform for the resolution of issues required in this era of change. The 2022 edition will be providing solutions catered to each and every needs by combining existing high-level skillsets that has survived the drastic market change in the past, with the latest technology that has built on knowledge and the history.
 
JIAM, one of the world's leading sewing equipment trade fairs, is an international trade fair that brings together cutting-edge technologies, products, and services from domestic and overseas manufacturers. The previous edition of JIAM 2016 welcomed 258 exhibitors from 15 countries and regions as well as 15,257 visitors from 72 countries and regions, mainly from Bangladesh, China, India, Korea, Taiwan, Sri Lanka, and Vietnam.

(c) Groz-Beckert KG
07.07.2021

Groz-Beckert at ITMA Asia: “complete success”

In addition to the in-person event, the company invited its visitors to a virtual booth. Groz-Beckert welcomed a total of almost 3,600 visitors during the trade fair – 2,300 of them in person and around 1,300 virtually.

This year, the virtual booth complemented the traditional booth on the trade fair grounds to enable us to reach as many customers as possible despite the coronavirus pandemic and worldwide restrictions. At both booths, the product highlights were explored using 3D models and discussions were held. At the virtual booth, each visitor had their own avatar which they could use to move through the virtual world. An exchange between customers and Groz-Beckert took place either in person or – also in real time – via chat or video cal
 
In Shanghai, most of the visitors came from China due to the pandemic. The ranking in the virtual environment puts India top in terms of visitor numbers, followed by Bangladesh, Germany and Turkey.

In addition to the in-person event, the company invited its visitors to a virtual booth. Groz-Beckert welcomed a total of almost 3,600 visitors during the trade fair – 2,300 of them in person and around 1,300 virtually.

This year, the virtual booth complemented the traditional booth on the trade fair grounds to enable us to reach as many customers as possible despite the coronavirus pandemic and worldwide restrictions. At both booths, the product highlights were explored using 3D models and discussions were held. At the virtual booth, each visitor had their own avatar which they could use to move through the virtual world. An exchange between customers and Groz-Beckert took place either in person or – also in real time – via chat or video cal
 
In Shanghai, most of the visitors came from China due to the pandemic. The ranking in the virtual environment puts India top in terms of visitor numbers, followed by Bangladesh, Germany and Turkey.

More information:
Groz-Beckert ITMA Asia + CITME
Source:

Groz-Beckert KG

Mostafiz Uddin Wins Coveted Drapers Sustainable Fashion Champion Award (c) Denim Expert Limited
Mostafiz Uddin
10.03.2021

Mostafiz Uddin Wins Coveted Drapers Sustainable Fashion Champion Award

  • Mostafiz Uddin, Managing Director of Denim Expert Limited and Founder of Bangladesh Apparel Exchange (BAE) has won Sustainable Fashion Champion at the Drapers Sustainable Fashion Awards 2021, which took place virtually on 10 March.

On receiving the award, Mostafiz said he wants to be a game-changer in the apparel industry, leading by example to inspire others to behave responsibly and ethically.

He also dedicated the award to H&M which, he explained, supported his business, Denim Expert, through the pandemic by continuing to place orders He said the loyal support of the Swedish fashion giant almost certainly helped save the livelihoods of 2000 workers at his factory and their 10000 family members. “That’s true sustainability leadership,” he said.

The Drapers Sustainable Fashion Awards recognise steps being made in reducing the fashion industry’s environmental impact and creating fairer working conditions across the supply chain.
Judged by an independent panel of sustainability and fashion retail experts, the awards shine a spotlight on best practice within the global fashion industry.

  • Mostafiz Uddin, Managing Director of Denim Expert Limited and Founder of Bangladesh Apparel Exchange (BAE) has won Sustainable Fashion Champion at the Drapers Sustainable Fashion Awards 2021, which took place virtually on 10 March.

On receiving the award, Mostafiz said he wants to be a game-changer in the apparel industry, leading by example to inspire others to behave responsibly and ethically.

He also dedicated the award to H&M which, he explained, supported his business, Denim Expert, through the pandemic by continuing to place orders He said the loyal support of the Swedish fashion giant almost certainly helped save the livelihoods of 2000 workers at his factory and their 10000 family members. “That’s true sustainability leadership,” he said.

The Drapers Sustainable Fashion Awards recognise steps being made in reducing the fashion industry’s environmental impact and creating fairer working conditions across the supply chain.
Judged by an independent panel of sustainability and fashion retail experts, the awards shine a spotlight on best practice within the global fashion industry.

Covid-19 has presented unforeseen challenges for fashion retailers and brands, but it has also given us all an opportunity to build back better. Forward-thinking fashion businesses know change is not optional, and are embracing their responsibilities and ability to make a difference.

Mostafiz Uddin has been recognised as the Sustainable Fashion Champion 2021 for setting examples in promoting sustainability during the Covid-19 pandemic which broke out worldwide in March last year.
Jill Geoghegan, Acting Editor of Drapers, said: “Despite the challenges thrown up by the Coronavirus pandemic, fashion brands and retailers increasingly recognise that sustainability is a business imperative.”  
“Many businesses continued to invest in cleaning up their supply chains and introducing new models of working, despite the unprecedented trading conditions.

“The Drapers Sustainable Fashion Awards highlight and celebrate these advancements, paving the way for a more responsible future for the industry.” Managing Director of Denim Expert Limited Mostafiz Uddin said: “In the pandemic, my factory Denim Expert Limited kept true to its commitment towards sustainability, despite an extremely difficult trading landscape.

“During the pandemic, I was vocal about the issue of buyer-supplier relationships and, in speaking out, I wanted to champion the cause of suppliers all over the world. Too often suppliers in garment supply chains do not have a voice because they fear that by speaking out, they will be treated unfavourably by brands.

“This was, of course, a risk on my own part but I like to think I stood up for what I think is right and ultimately, I believe progressive brands understood I was coming from a good place. Like them, all I want to see is a fair, ethical and sustainable industry where brands and retailers work in an environment of collaboration, not conflict.”

Mostafiz also had some special praise for H&M. He said: “It would have not been possible for me to support my workers during the pandemic, had my factory not received help from H&M during the unprecedented time. While Denim Expert suffered from huge orders cancellation and orders hold, H&M supported us by placing orders in the pandemic that saved thousands of lives and livelihoods. Therefore, I would like to dedicate this Award to H&M and its CEO Helena Helmersson.”

The judges of Drapers Sustainable Fashion Champion Award 2021 have been Kerry Bannigan, Founder, Conscious Fashion Campaign; Sarah Ditty, Global Policy Director, Fashion Revolution; Miriam Lahage, Founder, Aequip; Samata Pattinson, CEO, Red Carpet Green Dress; Caroline Rush, Chief Executive Officer, British Fashion Council; Lucy Shea, Group CEO, Futerra; Jane Shepherdson, Chairman, My Wardrobe HQ; and Dilys Williams, Director, Centre for Sustainable Fashion.

25.02.2021

GOTS certifications in 2020 reach five figures for the first time

In 2020, the number of GOTS certified facilities grew by 34% globally, to a new high of 10,388 from 7,765 in 2019. 16 GOTS Approved Certification Bodies report that over 3 million people in over 72 countries were working in GOTS certified facilities.

Significant increases are seen in all regions. Top 10 countries for certified facilities are India (2,994), Bangladesh (1,584), Turkey (1,107), China (961), Germany (684), Italy (585), Portugal (449), Pakistan (391), USA (167) and Sri Lanka (126).
GOTS approved chemical inputs now number 25,913, an increase of 13% in 2020. This confirms that these inputs are increasingly used as a risk management tool by wet processors to satisfy legal and commercial residue requirements.

“The exceptional increase in this unprecedented year shows that decision makers value GOTS as an important tool to drive sustainable transformation in a comprehensive way - from field to fashion. Using organic fibres and processing them under strict GOTS criteria definitely provides a credible and strong base for market players to be successful in the future” says GOTS Managing Director Claudia Kersten.

In 2020, the number of GOTS certified facilities grew by 34% globally, to a new high of 10,388 from 7,765 in 2019. 16 GOTS Approved Certification Bodies report that over 3 million people in over 72 countries were working in GOTS certified facilities.

Significant increases are seen in all regions. Top 10 countries for certified facilities are India (2,994), Bangladesh (1,584), Turkey (1,107), China (961), Germany (684), Italy (585), Portugal (449), Pakistan (391), USA (167) and Sri Lanka (126).
GOTS approved chemical inputs now number 25,913, an increase of 13% in 2020. This confirms that these inputs are increasingly used as a risk management tool by wet processors to satisfy legal and commercial residue requirements.

“The exceptional increase in this unprecedented year shows that decision makers value GOTS as an important tool to drive sustainable transformation in a comprehensive way - from field to fashion. Using organic fibres and processing them under strict GOTS criteria definitely provides a credible and strong base for market players to be successful in the future” says GOTS Managing Director Claudia Kersten.

GOTS version 6.0, to be implemented from 1 March 2021, includes stricter social and environmental criteria. Certified Entities will now have to calculate the gap between wages paid to 'Living Wages'  and will be encouraged to work towards closing this gap. Specific references to OECD Due Diligence Guidance and Good Practice Guidance for Social Criteria and Risk Assessment as well as Ethical Business Practises have been explicitly included.

Source:

Global Standard

Archroma and CleanKore join forces to promote sustainable, cost-effective indigo dyeing process (c) CleanKore
Below limits of detection according to industry standard test methods
02.02.2021

Archroma and Cleankore join forces to promote sustainable, cost-effective indigo dyeing process

Reinach, Switzerland, and Westlake, Ohio, 2 February 2021 - Archroma, a global leader in specialty chemicals towards sustainable solutions, today announced a strategic partnership with technology innovator CleanKore, aiming to advance sustainable dyeing processes throughout the denim supply chain.

The agreement will allow Archroma and CleanKore to promote the benefits of each other’s technologies. This includes Archroma’s robust catalog of dyes and specialty chemicals along with CleanKore’s patented process of dyeing yarns at the denim mill that completely eliminates the need for potassium permanganate (PP) spray and laser booster to achieve the bright white abrasion effect in the garment finishing process. The result is a large and circular bright white core with a small ring of indigo dye. The technology does not just eliminate the chemicals associated in the PP spray and laser process, which is much safer for denim workers, it also allows to save significant amounts of water and energy throughout the manufacturing process from fabric to garmenting.

Reinach, Switzerland, and Westlake, Ohio, 2 February 2021 - Archroma, a global leader in specialty chemicals towards sustainable solutions, today announced a strategic partnership with technology innovator CleanKore, aiming to advance sustainable dyeing processes throughout the denim supply chain.

The agreement will allow Archroma and CleanKore to promote the benefits of each other’s technologies. This includes Archroma’s robust catalog of dyes and specialty chemicals along with CleanKore’s patented process of dyeing yarns at the denim mill that completely eliminates the need for potassium permanganate (PP) spray and laser booster to achieve the bright white abrasion effect in the garment finishing process. The result is a large and circular bright white core with a small ring of indigo dye. The technology does not just eliminate the chemicals associated in the PP spray and laser process, which is much safer for denim workers, it also allows to save significant amounts of water and energy throughout the manufacturing process from fabric to garmenting.

CleanKore initially looked at eliminating potassium permanganate due to its being classified as hazardous if inhaled or ingested, or in case of contact with the skin or the eye. It is also considered very toxic to aquatic life. No new equipment or capital expenses are needed to implement the CleanKore technology, which works on all denim fabric, including dark indigo, sulfur top/bottom and sulfur black.

This is where Archroma comes into the picture. Its global technical team of denim coloration specialists will provide support to denim mills seeking to implement the CleanKore technology and develop the desired looks and effects - with the right colors and chemical systems for their production set-up.

CleanKore estimates that the technology allows to save up to 15 liters of water per garment, or the equivalent to the drinking needs of 5 people per day, and up to 0.51 kWh of energy per garment, or the equivalent of five 100-watt light bulbs on for 1 hour. The CleanKore technology also leads to a 10% to 20% increase in production throughput, as a result of a faster garment wash-down and the elimination of PP spray.

For CleanKore CEO Darryl Costin Jr., the announcement comes at an ideal time for CleanKore: "We have successfully proven the technology with mill partners such as Arvind and other denim mills in Pakistan, Bangladesh, China, Vietnam, Thailand and the United States. The response from the industry has been overwhelmingly positive. Having a partner in Archroma, one that is highly respected for their innovation and emphasis on sustainability throughout the industry, will allow us to take CleanKore to the next level.”

Umberto Devita, Global Indigo Manager at the Archroma Global Competence Center for Denim & Casualwear, adds: "CleanKore is perfectly aligned with the 3 pillars of 'The Archroma Way to a Sustainable World: Safe, efficient, enhanced'. 'Safe' through the elimination of a potentially harmful substance and the protection of the denim workers, 'Efficient' through the reduction of resource consumption, improved productivity and cost-effective profile. And 'Enhanced' through the gorgeous colors and effects allowed with Archroma's innovations and systems, in particular our aniline-free* Denisol® Pure Indigo and Diresul® sulfur dyes. We look forward to help promoting an innovation that will help with many of the challenges facing our denim customers throughout the world. Because it’s our nature."

Source:

Archroma

75 Years Hohenstein - Successful Roots worldwide © Hohenstein
Today, at its headquarters in Bönnigheim, Germany, Hohenstein has expanded as a versatile service provider beyond the castle with modern lab buildings.
04.01.2021

75 Years Hohenstein - Successful Roots worldwide

BÖNNIGHEIM - Textile testing and research partner Hohenstein has reason to celebrate: this year marks the company’s 75th anniversary. Now in its third generation of family ownership, the company will spend this landmark year expanding its foundation for the future. Owner Prof. Dr. Stefan Mecheels is proud: "Our motto, We live textiles, expresses exactly what has made us special for many decades - our collective enthusiasm for textiles and the opportunity to provide solutions that make a difference in the world.”

Successful Roots

BÖNNIGHEIM - Textile testing and research partner Hohenstein has reason to celebrate: this year marks the company’s 75th anniversary. Now in its third generation of family ownership, the company will spend this landmark year expanding its foundation for the future. Owner Prof. Dr. Stefan Mecheels is proud: "Our motto, We live textiles, expresses exactly what has made us special for many decades - our collective enthusiasm for textiles and the opportunity to provide solutions that make a difference in the world.”

Successful Roots

Prof. Dr.-Ing. Otto Mecheels laid the foundation for an internationally-renowned company in 1946 when he founded the Hohenstein Institutes, a textile school in Hohenstein Castle. His son, Prof. Dr. rer. nat. Jürgen Mecheels modernized the Hohenstein Group’s business structures and expanded into new research and service areas such as textile finishing or professional laundries/dry cleaning. He helped to forever change textile safety with the STANDARD 100 by OEKO-TEX® certification system that protects consumers from harmful substances. Under Prof. Dr. Stefan Mecheels’ leadership since 1995, Hohenstein has been at the forefront of microfiber analysis, consistently perfected its created standards for comfort and compression testing and worked to reduce the industry’s ecological impact. Last but not least, the testing laboratory in Hong Kong, which has been in operation since 2011, and the Hohenstein textile testing laboratories in Bangladesh and India, which were opened in 2018, ensure even greater market proximity.

Solutions for the Global Textile Industry

Today, Hohenstein specializes in the testing, certification and research of all kinds of textile-related products. With a total of more than 1,000 employees at its headquarters in Bönnigheim and in more than 40 branches, contact offices and laboratories worldwide, the company faces the current challenges of the global industry.

"Textile sustainability remains a major focus for us and is woven through every decision we make," explains Stefan Mecheels. “Even services that are seemingly focused on innovation contribute somehow to longer lasting products, less waste and more safety. Our Digital Fitting Lab helps brands leap forward with digitized apparel development. Using modern 3D and 4D technologies and our traditional fit and pattern expertise, we help our clients design better fitting clothes with fewer prototypes and less waste.”

When SARS-CoV-2 struck, the company developed a quality label to easily identify non-medical, community masks that meet legal and functional requirements. The Hohenstein Quality Labels are independent proof with a high level of credibility among buyers and consumers.

Anniversary

Among the celebrations, Hohenstein plans to hold a mid-year press conference with regional and industry journalists. "We are celebrating this anniversary because we have succeeded in constantly adapting to the market and use our applied research to anticipate developments. For this I would first like to thank our employees, who, in keeping with the motto We live textiles, put their hearts and souls into their work. A very special thanks also goes to our customers, some of whom have been placing their trust in us for decades," says Stefan Mecheels, adding "I am convinced that we are positioned to continue our contribution in the future.