From the Sector

Reset
8 results
 Sustainability Takes Centre-stage At Leading Bangladesh Shows (c) Bangladesh Apparel Exchange
15.10.2019

Sustainability Takes Centre-stage At Leading Bangladesh Shows

  • Bangladesh’s biggest denim expo takes place 5-6 November
  • The show runs concurrently with the Sustainable Apparel Forum Bangladesh
  • From 4-6 November, Bangladesh becomes the perfect meeting point for stakeholders in the global apparel industry

DHAKA - Responsibility is the theme of the 11th Bangladesh Denim Expo which takes place on 5th and 6th November at International Convention City in Bashundhara, Dhaka. The event, now firmly established as one of the world’s leading denim trade shows, runs alongside the Bangladesh Sustainable Apparel Forum.

Bangladesh Denim Expo

Around 100 exhibitors from 11 countries, including host Bangladesh, will participate in this year’s denim expo. Other participating countries are china, Japan, Italy, India, Singapore, Brazil, Spain, Pakistan, Turkey and Germany.

  • Bangladesh’s biggest denim expo takes place 5-6 November
  • The show runs concurrently with the Sustainable Apparel Forum Bangladesh
  • From 4-6 November, Bangladesh becomes the perfect meeting point for stakeholders in the global apparel industry

DHAKA - Responsibility is the theme of the 11th Bangladesh Denim Expo which takes place on 5th and 6th November at International Convention City in Bashundhara, Dhaka. The event, now firmly established as one of the world’s leading denim trade shows, runs alongside the Bangladesh Sustainable Apparel Forum.

Bangladesh Denim Expo

Around 100 exhibitors from 11 countries, including host Bangladesh, will participate in this year’s denim expo. Other participating countries are china, Japan, Italy, India, Singapore, Brazil, Spain, Pakistan, Turkey and Germany.

H&M Group is collaborating with Bangladesh Denim Expo for the forthcoming 11th edition of the event and a number of guest speakers will be present from the company, including Pierre Borjesson, head of sustainability, global production. Other guest speakers include Andrew Olah, the founder of Kingpins Denim show, Alice Tonello, R&D director with the Tonello Group, world renowned denim designer, Piero Turk and Jordi Juani, Asia regional director with Jeanologia.

Through a series of product displays, presentations, seminar sessions & panel discussions, the Expo will encourage healthy debate and interaction among exhibitors and visitors to champion a more responsible denim industry. One of these, of course, is sustainability and within this sits the issue of responsibility – an overriding theme of this year’s event. Denim manufacture faces huge challenges with regards its social and environmental responsibility, with production techniques having potentially far-reaching ramifications for the environment as well as people involved in the production process.

However, the industry and its supply chain are making impressive progress on these issues with Bangladesh – now the world’s largest producer of denim – leading the way in terms of addressing some of the sustainability challenges relating to denim production, including excessive use of water and chemicals. Mostafiz Uddin is the organiser of Bangladesh Denim Expo. Uddin has watched with interest the evolution of the denim industry, with each Expo marking continued and gradual progress being made by the more progressive players in the industry.

Uddin says: “The way that business and product development is conducted can have far reaching consequences on the environment, on the people that make the product and the product’s end use & life-span. “It is the duty of all stakeholders in the apparel industry to acknowledge this responsibility and to analyse our business practices, for the benefit of all.” Emphasising the theme of responsibility within Denim Expo is the fact that revenues from the expo support the running and presentation of the Sustainable Apparel Forum.

Sustainable Apparel Forum

The Sustainable Apparel Forum (SAF) is the biggest annual sustainable apparel event in Bangladesh. Bangladesh Apparel Exchange (BAE) along with Bangladesh Garment Manufacturers and Exporters Association (BGMEA) as co-organiser will jointly carry out the 2nd edition of the SAF on 5th Nov 2019.

This is the second edition of the Sustainable Apparel Forum, with the first-ever forum held in 2017 in Dhaka. The objective of this year’s forum is accelerating the momentum of sustainability in Bangladesh apparel industry.

The forum will see more than 50 speakers gathered from Bangladesh and overseas sharing expert opinions across five panel discussions covering current issues in the country’s apparel industry. These include human resources, transparency in business, water conservation, purchasing practices, sustainable chemical management, waste management, circular economy in textiles and climate change to name a few.

Additionally, the conference will host several knowledge building technical presentations from renowned organisations which will cover different issues relating to sustainability, including waste management, protection of the environment and better working conditions.

Speakers at the show include Md. Shahriar Alam, MP, Honourable State Minister, Ministry of Foreign Affairs, Bangladesh, H. E. Benoit Préfonatine High Commissioner, High Commission of Canada, Bangladesh, and Dr. Rubana Huq President, Bangladesh Garment Manufacturers’ and Exporters’ Association, Sheikh Fazle Fahim, President, Federation of Bangladesh Chamber of Commerce & Industries, Pierre Börjesson, Head of Sustainability – Global Production, H&M Group, Tuomo Poutiainen, Country Director, International Labor Organization, Peter McCallister, Executive Director, Ethical Trading Initiative and H.E. Winnie Estrup Petersen Ambassador, Embassy of Denmark, Bangladesh.

Prior to this year’s conference, the Embassy of the Kingdom of the Netherlands in Bangladesh and the Sweden Embassy in Bangladesh will also co-host two roundtable discussion in collaboration with BAE and in association with BGMEA on 4 November, 2019, while H&M, Better Work Bangladesh and C&A Foundation are partners in the event.
The conference will be followed by showcasing different innovative, sustainable & best work practices in RMG manufacturing factories in Bangladesh. Following the discussions, a series of recommendations will be made, and a Sustainability Roadmap for the Bangladesh apparel industry will be formulated.

This year’s SAF promises to be the biggest yet. Added by Mr Mostafiz Uddin in the recent press briefing for the event: “The title for this year’s Sustainable Apparel Forum is enabling sustainability through policy and leadership. The time for talking on sustainability issues is over. It is now time for actions. That’s why the focus of this year’s show is on practical, pragmatic actions the textile industry can adopt to improve its environmental footprint.”

23.09.2019

Tape inserts offer big potential for injection molding parts

Market and technology analysis confirms big potential for tape inserts in the injection molding process. Following the finalization of a major consortial project led by the Aachen Center for Integrative Lightweight Production (AZL) and the Institute for Plastics Processing at RWTH Aachen University (IKV), the result is clear: tape inserts offer enormous potential for injection molding parts. For suitable components, product costs and component properties can be positively influenced.

In cooperation with 20 industrial partners, the two renowned Aachen research institutes AZL and IKV carried out a detailed analysis of tape inserts in injection molded components over a period of eight months. The tapes, which are a few tenths of a millimeter thick, are continuous fibers, typically made of glass or carbon, completely impregnated and embedded in a thermoplastic matrix. The tapes can be precisely aligned to the loads in a component and are used primarily in high-performance applications with the aim of weight reduction. The aim of the conducted analysis was the identification of potential applications and the estimation of a wider range of applications.

Market and technology analysis confirms big potential for tape inserts in the injection molding process. Following the finalization of a major consortial project led by the Aachen Center for Integrative Lightweight Production (AZL) and the Institute for Plastics Processing at RWTH Aachen University (IKV), the result is clear: tape inserts offer enormous potential for injection molding parts. For suitable components, product costs and component properties can be positively influenced.

In cooperation with 20 industrial partners, the two renowned Aachen research institutes AZL and IKV carried out a detailed analysis of tape inserts in injection molded components over a period of eight months. The tapes, which are a few tenths of a millimeter thick, are continuous fibers, typically made of glass or carbon, completely impregnated and embedded in a thermoplastic matrix. The tapes can be precisely aligned to the loads in a component and are used primarily in high-performance applications with the aim of weight reduction. The aim of the conducted analysis was the identification of potential applications and the estimation of a wider range of applications.

The project was divided into several phases: Phase I was used to identify the current status. In 20 interviews with representative companies of the injection molding industry, the researchers gathered why tape inserts have rarely been taken into account so far, when defining the material concepts to be analyzed. The lack of information about the material class, the procedure and tools for the development process and the necessary production technologies were cited as major challenges. This is where the consortium will take action and provide comprehensive information during the “Technology Information Day” on the extensively prepared state of the art and the high degree of maturity of the supply chain. Based on the status quo, they developed a methodology for analyzing the technological and economic potential of tape inserts in injection molding applications.

Both the previous results and the planned follow-up projects are the subject of the “Technology Information Day" at K 2019, to which the companies involved in the study, the AZL and IKV, invite all companies along the value chain, from raw material manufacturers to injection molders to OEMs. (Date: 18th October 2019, 10:00 am to 1:30 pm, Trade Fair Düsseldorf CCD South, Room 002).

The consortium, amongst others consisting of Asahi Kasei Europe GmbH, BASF SE, Borealis AG, BÜFA Thermoplastic Composites GmbH & Co. KG, ENGEL AUSTRIA GmbH, Huesker Synthetic GmbH, LG Hausys R&D Center, Mitsui Chemicals, Nippon Electric Glass, Polyscope Polymers BV, POLYTEC GROUP, Simcon kunststofftechnische Software GmbH, SABIC and Toray International Europe GmbH, is inviting to the “Technology Information Day” at K 2019. The goal is to inform about the technology and to identify topics for future collaboration.

Source:

AZL Aachen GmbH

(c) AZL Aachen GmbH
29.03.2019

AZL, Winner of the JEC Innovation Award 2019, Category: “Industry & Equipment”

This year, AZL won the JEC AWARD 2019 for the development of the new machine system “Ultra-Fast Consolidator Machine”. This innovative machine system is a result of an 18-months AZL Joint Partner Project, conducted in 2017-2018 by the research partners AZL Aachen and Fraunhofer IPT Aachen, in cooperation with industrial partner companies including Conbility, Covestro, Engel, Evonik, Fagor Arrasate, Faurecia SE, Laserline, Mitsui Chemicals, Mubea Carbo Tech, Philips Photonics, SSDT and Toyota (in alphabetical order).

This year, AZL won the JEC AWARD 2019 for the development of the new machine system “Ultra-Fast Consolidator Machine”. This innovative machine system is a result of an 18-months AZL Joint Partner Project, conducted in 2017-2018 by the research partners AZL Aachen and Fraunhofer IPT Aachen, in cooperation with industrial partner companies including Conbility, Covestro, Engel, Evonik, Fagor Arrasate, Faurecia SE, Laserline, Mitsui Chemicals, Mubea Carbo Tech, Philips Photonics, SSDT and Toyota (in alphabetical order).

The new UItra-Fast Consolidator Machine offers both high flexibility and mass production of tailored thermoplastic laminates with reduced scrap. Fully consolidated multi-layer laminates with different fiber directions and minimized scrap (tailored blanks) can be produced in cycle times below 5 seconds with this new scalable machine setup. This individualized mass production is accomplished by a combination of laser-assisted tape placement with in-situ consolidation and a piece-flow principle, which is state of the art in the printing industry but has not been used in such a way within composite production. The achievable productivity is enhanced to more than 500 kg/hour by this piece-flow principle with carriers moved through multiple application stations which are equipped with multiple tape placement applicators. The new machine is scalable: multiple application stations can be added, e.g. for each layer one station for mass production or for each fiber direction one station with a carrier-conveyor carousel: here the carriers are moved multiple times through the application stations.

The system will be commercialized by some of the industrial partners in 2019. The real machine setup has been presented at the AZL booth during the JEC Exhibition in Paris 2019.

The follow-up project has just started and is still open to join for industrial partners. This follow-up project comprises a further upscale of the machine system as well as a preparation of the commercialization by long-term durability tests and further process optimizations using different tape materials.

More information:
AZL SMC, AZL, RWTH Aachen
Source:

AZL Aachen GmbH

JEC AWARD Gewinner AZL zusammen mit einigen Projektpartnern bei der Preisverleihung auf der JEC in Paris (c) AZL Aachen GmbH
29.03.2019

AZL gewinnt JEC Innovation Award 2019, Kategorie: „Industry & Equipment“

Das AZL ist Gewinner des JEC AWARD 2019 in der Kategorie „Industry & Equipment“ für die neue Maschinen-Entwicklung "Ultra-Fast Consolidator Machine“. Dieses innovative Maschinensystem ist das Ergebnis eines 18-monatigen AZL Joint Partner Projektes, das 2017-2018 von den Forschungspartnern AZL Aachen und Fraunhofer IPT Aachen in Zusammenarbeit mit industriellen Partnerunternehmen wie Conbility, Covestro, Engel, Evonik, Fagor Arrasate, Faurecia SE, Laserline, Mitsui Chemicals, Mubea Carbo Tech, Philips Photonics, SSDT und Toyota (in alphabetischer Reihenfolge) durchgeführt wurde.

Das AZL ist Gewinner des JEC AWARD 2019 in der Kategorie „Industry & Equipment“ für die neue Maschinen-Entwicklung "Ultra-Fast Consolidator Machine“. Dieses innovative Maschinensystem ist das Ergebnis eines 18-monatigen AZL Joint Partner Projektes, das 2017-2018 von den Forschungspartnern AZL Aachen und Fraunhofer IPT Aachen in Zusammenarbeit mit industriellen Partnerunternehmen wie Conbility, Covestro, Engel, Evonik, Fagor Arrasate, Faurecia SE, Laserline, Mitsui Chemicals, Mubea Carbo Tech, Philips Photonics, SSDT und Toyota (in alphabetischer Reihenfolge) durchgeführt wurde.

Die neue UItra-Fast Consolidator Maschine ermöglicht sowohl hohe Flexibilität als auch die Massenproduktion von maßgeschneiderten thermoplastischen Laminaten mit reduziertem Ausschuss. Vollständig konsolidierte Mehrschichtlaminate mit unterschiedlichen Faserrichtungen und minimiertem Ausschuss (Tailored Blanks) können in Zykluszeiten unter 5 Sekunden hergestellt werden mit diesem einfach hoch skalierbaren Maschinenkonzept. Diese individualisierte Massenproduktion wird durch eine Kombination aus laserunterstütztem Tape Placement mit In-situ-Konsolidierung und einem Piece-Flow Prinzip erreicht, das in der Druckindustrie Stand der Technik ist, aber innerhalb der Composite Produktion noch nicht eingesetzt wurde.

Die erreichbare Produktivität ist durch dieses Prinzip auf über 500 kg/Stunde skalierbar, indem einzelne „Carrier“ durch mehrere Applikationsstationen bewegt werden, die wiederum mit mehreren Tapelege-Applikatoren ausgestattet sind. Die neue Maschine ist skalierbar: Mehrere Applikationsstationen können hinzugefügt werden, z.B. für jede Laminat-Schicht eine Station für die Massenproduktion oder für jede Faserrichtung eine Station mit einem Förder-Karussell: Hier werden die Carrier mehrfach durch die Applikationsstationen bewegt.

Die Kommerzialisierung des Systems durch einige der Industriepartner wird 2019 erfolgen. Der reale Maschinenaufbau wurde auf dem AZL-Stand der JEC Messe in Paris präsentiert.

Das „Follow-up“-Projekt hat begonnen und ist noch offen für die Aufnahme weiterer Industrie-Projektpartner. Im Rahmen dieses Follow-up Projektes werden insbesondere die Kommerzialisierung des Systems vorbereitet durch Langzeit-Tests sowie durch weitere Prozessoptimierungen mit unterschiedlichen Tape-Materialien.

More information:
AZL SMC, AZL, RWTH Aachen
Source:

AZL Aachen GmbH

(c) AZL Aachen GmbH
04.03.2019

AZL demonstrates new Ultra-Fast Consolidator Machine at JEC World in Paris

After many years of successful cooperation on JEC World since 2015, the Aachen Center for Integrative Lightweight Production (AZL) renewed the cooperation with the JEC Group for 2019:

At the dedicated exhibition area called “Composites in Action - JEC Group in partnership with AZL” (Hall 5A, D17), AZL and its 9 Partner Institutes of RWTH Aachen University present their latest research and development results. The innovations covering the whole composite value chain including research results of AZL, Fraunhofer Institute for Production Technology IPT and Fraunhofer Institute for Laser Technology ILT, the Institute of Plastics Processing (IKV) in Industry and the Skilled Crafts as well as RWTH Aachen University institutes including the Laboratory for Machine Tools and Production Engineering (WZL), the Welding and Joining Institute (ISF), the “Institut für Textiltechnik” (ITA), the Institute for Automotive Engineering (IKA), the Institute of Structural Mechanics and Lightweight Design (SLA). Following companies are sponsoring partners of this booth and will present their latest products and services: Hille Engineering, Maru Hachi, TELENE and Textechno.

After many years of successful cooperation on JEC World since 2015, the Aachen Center for Integrative Lightweight Production (AZL) renewed the cooperation with the JEC Group for 2019:

At the dedicated exhibition area called “Composites in Action - JEC Group in partnership with AZL” (Hall 5A, D17), AZL and its 9 Partner Institutes of RWTH Aachen University present their latest research and development results. The innovations covering the whole composite value chain including research results of AZL, Fraunhofer Institute for Production Technology IPT and Fraunhofer Institute for Laser Technology ILT, the Institute of Plastics Processing (IKV) in Industry and the Skilled Crafts as well as RWTH Aachen University institutes including the Laboratory for Machine Tools and Production Engineering (WZL), the Welding and Joining Institute (ISF), the “Institut für Textiltechnik” (ITA), the Institute for Automotive Engineering (IKA), the Institute of Structural Mechanics and Lightweight Design (SLA). Following companies are sponsoring partners of this booth and will present their latest products and services: Hille Engineering, Maru Hachi, TELENE and Textechno.

This year, AZL is very proud to present a new machine system development at their booth:
The real machine setup of the “Ultra-Fast Consolidator Machine” will be shown at the AZL booth (Hall 5A, D17) which is one of three finalists for the JEC AWARD 2019 in the category “Industry and Equipment”.

More information:
SMC, AZL, RWTH Aachen AZL
Source:

AZL Aachen GmbH

Bushing heated via induction of the novel glass fibre production line (c) ITA
Bushing heated via induction of the novel glass fibre production line
21.02.2019

ITA at JEC World 2019: newly constructed induction heated glass fibre production line among other exhibits

At the joint stand of the Aachen Centre for Integrative Lightweight Construction (AZL) in Hall 5A, booth D17, the Institut für Textiltechnik of RWTH Aachen University (ITA) will demonstrate its expertise in the field of glass fibres, preforms and textile concrete 12-14 March 2019 in Paris.
The exhibits come from various fields of application and address the automotive, aerospace and mechanical engineering sectors.

At the joint stand of the Aachen Centre for Integrative Lightweight Construction (AZL) in Hall 5A, booth D17, the Institut für Textiltechnik of RWTH Aachen University (ITA) will demonstrate its expertise in the field of glass fibres, preforms and textile concrete 12-14 March 2019 in Paris.
The exhibits come from various fields of application and address the automotive, aerospace and mechanical engineering sectors.

  1. Innovative glass fibre research at ITA
    The newly constructed induction heated glass fibre production line enables increased flexibility in research. For the first time, glass fibres will be produced live at the ITA booth at JEC World. One of the innovations of the system is the inductively heated bushing. It features a flexible design and consists of a platinum/rhodium alloy (Pt/Rh20) for use in high-temperature glasses.
    The glass fibre production line was designed in such a way that new concepts and ideas can be tested quickly. The modular design allows a high flexibility, the induction system a significantly faster operability.
    Research and development projects can therefore be carried out faster and more cost-effectively.
     
  2. DrapeCube - Forming of textile semi-finished products
    The DrapeCube offers a cost-effective design for the production of fibre preforms from textile semi-finished products. It is used in the production of preforms for prototypes and in small series and is suit-able for companies active in the production of fibre-reinforced plas-tics (FRP).
    In the production of FRP components, the preforming process de-fines a large part of the subsequent component costs. In small- and medium-sized enterprises, this process step is often still carried out manually. This results in high quality fluctuations and component prices. Especially in the case of highly stressed structural components, the fluctuation in quality leads to oversizing of the components.
    Thus, the lightweight construction potential of fiber-reinforced plastics is underused. One solution is offered by the stamp forming process adapted from the sheet metal forming industry for shaping rein-forcing textiles. The textile is inserted between two mould halves (male and female) and automatically formed. Due to high plant and tooling costs, this process is used almost exclusively in large-scale production.
    The ITA has developed the DrapeCube forming station which offers a cost-effective alternative and is able to completely reproduce the current state of the art for forming textile half branches. The process steps will be demonstrated in a video at the booth.
     
  3. Carbon fibre reinforced plastic (CFRP) preform
    The CFRP preform consists of carbon multiaxial fabrics formed by expanded polystyrene (EPS) to optimise draping quality. Preforms of increased quality can be produced by gentle, textile-compatible forming with foam expansion. For the first time, foam expansion was used to form preforms in such a way that the draping quality is improved compared to classic stamp forming.
    The advantages of the CFRP preform lie in the savings in plant costs, as the investment is much lower. In addition, the proportion of waste is reduced because near-net-shape production is possible. In addition, rejects are reduced, as fewer faults occur in the textile.
     
  4. Embroidered preform with integrated metal insert
    The 12k carbon fibre rovings are shaped into a preform using Tai-lored Fibre Placement (TFP) which is a technical embroidery pro-cess. For the further layer build-up, a fastener is not only integrated under the roving layers but also fixed by additional loops. The highly integrative preforming approach offers the possibility of reducing weight and process steps as well as increasing mechanical perfor-mance.
    Until now, inserts were glued or holes had to be drilled in the com-ponent. Bonded fasteners are limited by the adhesive surface. The bonding of fasteners into drilled holes results in high drill abrasion and thus high tool wear.
    The advantages of the embroidered preform with integrated metal fasteners are the reduction of scrap due to TFP preforming and the increase in the specific pull-out force. In addition, it is possible to automatize the production of integrative preforms. This makes the preform with integrated metal fasteners interesting for the automotive and aerospace industries.
Source:

Institut für Textiltechnik of RWTH Aachen University

Concrete bar stool with hybrid carbon reinforcement for fast, cost-efficient part production (c) Institut für Textiltechnik of RWTH Aachen University
29.10.2018

ITA at the Composites Europe 2018 in Stuttgart

At the Composites Europe in Stuttgart /06 - 08 November 2018), the Institut für Textiltechnik of RWTH Aachen University, short ITA, will be showing products, components and machines along the fibre composite process chain. The ITA will present itself at the booth of the Aachen Center for Integrative Lightweight Construction (AZL) in hall 9, booth E70. Various demonstrators will be used to present selected innovative processes and products over the individual steps. The exhibits come from different fields of application: From mobility applications to the construction sector. Here is an example from the field of "construction composites":

With the concrete bar stool with hybrid carbon reinforcement, the ITA demonstrates that textiles as reinforcement structures for concrete elements allow a enormous geometrical freedom of Design. So far, manual positioning of the textile reinforcement used to be time-consuming and complex, as permitted tolerances are in the millimetre range. Thus the production mainly contributed to the high costs of textile concrete.

At the Composites Europe in Stuttgart /06 - 08 November 2018), the Institut für Textiltechnik of RWTH Aachen University, short ITA, will be showing products, components and machines along the fibre composite process chain. The ITA will present itself at the booth of the Aachen Center for Integrative Lightweight Construction (AZL) in hall 9, booth E70. Various demonstrators will be used to present selected innovative processes and products over the individual steps. The exhibits come from different fields of application: From mobility applications to the construction sector. Here is an example from the field of "construction composites":

With the concrete bar stool with hybrid carbon reinforcement, the ITA demonstrates that textiles as reinforcement structures for concrete elements allow a enormous geometrical freedom of Design. So far, manual positioning of the textile reinforcement used to be time-consuming and complex, as permitted tolerances are in the millimetre range. Thus the production mainly contributed to the high costs of textile concrete.

At the ITA, the two industrial partners Albani Group GmbH & Co. KG and DuraPact 2.0 Kompetenzzentrum Faserbeton GmbH developed a new hybrid reinforcement with integrated spacer. This hybrid reinforcement reduces the time required to position the reinforcement by up to 60 percent and thus makes the material significantly more

The new, cost-effective hybrid reinforcement contains an integrated spacer and thus faciliates the positioning of dry and coated reinforcements. The integrated spacer allows several layers of reinforcement to be stacked quickly, allowing the desired degree of reinforcement to be set. The hybrid reinforcement consists of a carbon or glass fibre grid joined with a permeable polyamide mat and will be available in roll form from industrial partners in the near future.

More information:
Composites AZL
Source:

Institut für Textiltechnik of RWTH Aachen University

Barhocker aus Beton mit hybrider Carbon-Bewehrung zur schnellen, kosteneffizienten Positionierung der Textilbewehrung (c) Institut für Textiltechnik of RWTH Aachen University
29.10.2018

ITA auf der Composites Europe 2018 in Stuttgart

Das Institut für Textiltechnik der RWTH Aachen University, kurz ITA, zeigt auf der Composites Europe in Stuttgart vom 06.-08. November Produkte, Bauteile und Maschinen entlang der Faserverbundprozesskette. Das ITA präsentiert sich auf dem Stand des Aachener Zentrums für integrativen Leichtbau (AZL) in Halle 9, Stand E70. Anhand verschiedener Demonstratoren werden ausgewählte innovative Prozesse und Produkte über die einzelnen Schritte hin dargestellt. Die Exponate stammen aus unterschiedlichen Anwendungsfeldern: Von Mobilitätsanwendungen bis hin zur Baubranche. Anbei ein Beispiel aus dem Baubereich:

Durch den Barhocker aus Beton mit hybrider Carbon-Textilbewehrung beweist das ITA, dass Textilbetonelemente eine enorme geometrische Gestaltungsfreiheit ermöglichen und gleichzeitig einfach herstellbar sind. Bislang war die manuelle Positionierung der Textilbewehrung zeitaufwändig und komplex, da zulässige Toleranzen im Millimeterbereich liegen. So trug die Fertigung hauptsächlich zu den hohen Kosten von Textilbeton bei.

Das Institut für Textiltechnik der RWTH Aachen University, kurz ITA, zeigt auf der Composites Europe in Stuttgart vom 06.-08. November Produkte, Bauteile und Maschinen entlang der Faserverbundprozesskette. Das ITA präsentiert sich auf dem Stand des Aachener Zentrums für integrativen Leichtbau (AZL) in Halle 9, Stand E70. Anhand verschiedener Demonstratoren werden ausgewählte innovative Prozesse und Produkte über die einzelnen Schritte hin dargestellt. Die Exponate stammen aus unterschiedlichen Anwendungsfeldern: Von Mobilitätsanwendungen bis hin zur Baubranche. Anbei ein Beispiel aus dem Baubereich:

Durch den Barhocker aus Beton mit hybrider Carbon-Textilbewehrung beweist das ITA, dass Textilbetonelemente eine enorme geometrische Gestaltungsfreiheit ermöglichen und gleichzeitig einfach herstellbar sind. Bislang war die manuelle Positionierung der Textilbewehrung zeitaufwändig und komplex, da zulässige Toleranzen im Millimeterbereich liegen. So trug die Fertigung hauptsächlich zu den hohen Kosten von Textilbeton bei.

Am ITA wurde gemeinsam mit den beiden Industriepartnern Albani Group GmbH & Co. KG und DuraPact 2.0 Kompetenzzentrum Faserbeton GmbH eine neue Hybridbewehrung mit integriertem Ab-standshalter entwickelt. Diese Hybridbewehrung senkt die erforderliche Zeit zur Positionierung der Bewehrung um bis zu 60 Prozent und macht den Werkstoff damit deutlich wettbewerbsfähiger.

Die kostengünstige, hybride Bewehrung enthält einen integrierten Abstandshalter und ermöglicht damit die einfache Positionierung von trockenen und beschichteten Bewehrungen. Durch den integrierten Abstandhalter lassen sich schnell mehrere Bewehrungslagen stapeln, wodurch der gewünschte Bewehrungsgrad einstellbar ist. Die Hybridbewehrung besteht aus einem Carbon- oder Glasfasergitter, das mit einer durchlässigen Matte aus Polyamid gefügt ist und in naher Zukunft bei den Industriepartnern als Rollenware erhältlich ist.

More information:
Composites AZL
Source:

Institut für Textiltechnik of RWTH Aachen University