From the Sector

Reset
64 results
26.03.2024

CARBIOS joins Paris Good Fashion

CARBIOS, a pioneer in the development and industrialization of biological technologies to reinvent the life cycle of plastic and textiles, announces its membership to Paris Good Fashion, the association that unites over 100 French players in the sector - brands, designers and experts - around their commitment to sustainable fashion. CARBIOS is the first recycling technology supplier to join, demonstrating the importance given to recycling to achieve textile circularity. By contributing its solution for the biorecycling of polyester, the world's most widely used and fastest-growing textile fiber, CARBIOS aims to contribute Paris Good Fashion’s mission, which focuses on concrete actions, best practice sharing and collective intelligence to accelerate change in the fashion industry.

CARBIOS, a pioneer in the development and industrialization of biological technologies to reinvent the life cycle of plastic and textiles, announces its membership to Paris Good Fashion, the association that unites over 100 French players in the sector - brands, designers and experts - around their commitment to sustainable fashion. CARBIOS is the first recycling technology supplier to join, demonstrating the importance given to recycling to achieve textile circularity. By contributing its solution for the biorecycling of polyester, the world's most widely used and fastest-growing textile fiber, CARBIOS aims to contribute Paris Good Fashion’s mission, which focuses on concrete actions, best practice sharing and collective intelligence to accelerate change in the fashion industry.

CARBIOS will be particularly involved in the association's project to set up a working group dedicated to the development of a "fiber-to-fiber" industry, one of Paris Good Fashion's top priorities over the next five years. While only 1% of textiles are currently recycled fiber-to-fiber (circular), this working group will identify levers for significantly increasing the share of recycled fibers in the industry.  Polyester currently follows a linear model from which we need to break out: virgin polyester is made from petroleum, and recycled polyester from PET bottles. After use, most of these products end their lives in landfill or incineration. A circular, "fiber-to-fiber" industry will give new life to textiles and reduce the environmental impact associated to their end-of-life management.

Source:

Carbios

RegioGreenTex Annual Consortium Meeting Photo Euratex
13.03.2024

RegioGreenTex Annual Consortium Meeting in Portugal

Representatives from all 43 European partners of RegioGreenTex met for the Annual Consortium Meeting, hosted by CITEVE – the Portuguese Centre for textile innovation.

Co-funded by the European Union I3 Instrument Programme, RegioGreenTex is a €13 million project to promote investments in textile circularity. Research centres, regional clusters, regional development agencies and 26 SMEs collaborate to realise unique pilot projects to transform the textile industry business model from linear to circular.
 
The annual consortium meeting is a pivotal point to assess the project’s progress and impact. Presentations and workshops have been an essential part of the meeting, along with  networking opportunities where partners created synergies and discussed common challenges. Furthermore, all SME partners showcased their results through an exhibition with samples of garments, yarns, fabrics and products: the outcome of the project’s innovation so far. New collaborations and partners are expected to flourish as another outcome and the meeting.

Representatives from all 43 European partners of RegioGreenTex met for the Annual Consortium Meeting, hosted by CITEVE – the Portuguese Centre for textile innovation.

Co-funded by the European Union I3 Instrument Programme, RegioGreenTex is a €13 million project to promote investments in textile circularity. Research centres, regional clusters, regional development agencies and 26 SMEs collaborate to realise unique pilot projects to transform the textile industry business model from linear to circular.
 
The annual consortium meeting is a pivotal point to assess the project’s progress and impact. Presentations and workshops have been an essential part of the meeting, along with  networking opportunities where partners created synergies and discussed common challenges. Furthermore, all SME partners showcased their results through an exhibition with samples of garments, yarns, fabrics and products: the outcome of the project’s innovation so far. New collaborations and partners are expected to flourish as another outcome and the meeting.

EURATEX, as project coordinator, ensures the successful implementation of this ambitious initiative. Dirk Vantyghem, EURATEX Director General, commented: “RegioGreenTex is an essential piece of our wider plan to implement the EU Sustainable Textile Strategy. Offering investment support to our SMEs is critical to make this green transition a success.”

Source:

Euratex

28.12.2023

ITMA ASIA + CITME: A success for VDMA member companies

This year’s edition of ITMA ASIA + CITME proved to be a success for the exhibiting VDMA member companies. Measured by booked square metres, Germany had the largest contingent, among the foreign exhibitors. More than 40 VDMA member companies were exhibiting their innovative products in Shanghai.

Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association noted: “Although facing a difficult market situation, this year’s edition of ITMA ASIA + CITME has exceeded the expectations, both in terms of the number of visitors and the quality of the talks. The significant number of foreign visitors to the fair was particularly pleasing.”

Solutions were demonstrated for more sustainable textile productions by most of the exhibitors, and here the VDMA members presented their technologies for saving water, energy and raw materials under the heading “Smart technologies for green textile production.”  

This year’s edition of ITMA ASIA + CITME proved to be a success for the exhibiting VDMA member companies. Measured by booked square metres, Germany had the largest contingent, among the foreign exhibitors. More than 40 VDMA member companies were exhibiting their innovative products in Shanghai.

Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association noted: “Although facing a difficult market situation, this year’s edition of ITMA ASIA + CITME has exceeded the expectations, both in terms of the number of visitors and the quality of the talks. The significant number of foreign visitors to the fair was particularly pleasing.”

Solutions were demonstrated for more sustainable textile productions by most of the exhibitors, and here the VDMA members presented their technologies for saving water, energy and raw materials under the heading “Smart technologies for green textile production.”  

Dr. Uwe Rondé, CEO, Saurer Intelligent Technology AG explained: “Saurer is satisfied with both the number of visitors and the quality of the discussions. Our booth was full from morning to evening with customers focused on latest technologies within the three mega trends: recycling, automation and digitalisation. Although machine utilisation in the spinning mills is still well below average, people are already gathering information and thinking about what to invest in once the market recovers.”

Benjamin Reiners, owner of Reiners + Fürst stated: „This year’s ITMA ASIA + CITME has exceeded our expectations by far. Especially the first day - a Sunday - has brought many high-quality customers and exclusively decision makers to our booth. We estimate about 20% international customers mainly from Bangladesh, Egypt, India, Iran, Pakistan, Uzbekistan and Vietnam. All customers agreed that the market situation at the moment is difficult, capacity usage is between 50-75% in the ring spinning sector and improvement is expected not before the 2nd half of 2024. Nevertheless the general spirit is very positive.“

“This ITMA ASIA was a great success for Trützschler. We welcomed a large number of Chinese visitors to our booth, as well as a significant number of interested international visitors”, said Dr. Bettina Temath, Head of Global Marketing Trützschler Group SE.

Georg Stausberg, CEO of the polymer processing solutions division and chief sustainability officer of the Oerlikon Group stated: „We can look back on a successful show where we were able to meet many of our customers not only from China, but also from Pakistan, India and Indonesia, for example.”

“A very well-attended trade fair, with interesting discussions, great innovative topics, in line with the modern and rapidly developing China" noted Wolfgang Schöffl, head of product line weaving machines and member of the extended management, Lindauer Dornier.

The VDMA Textile Machinery Association and VDMA China were present at the fair, to support the members e.g. with regard to IPR. With the help of a VDMA expert and a contracted law firm, the member company Sahm submitted a complaint application for patent infringement disputes during the exhibition to the onsite IPR office. Both parties, Sahm, and the Chinese company, that used patented design without permission reached an agreement: The Chinese company had to stop displaying functions and designs involving patent infringement on site which meant the removal of some structural parts and the covering of key components protected by patent protection.

Dr. Harald Weber, managing director of VDMA Textile Machinery concluded: “Asia, and China in particular, represent the primary foreign markets for the VDMA member companies in the sector. The Chinese market is the main destination for their exports. Other major export destinations in Asia include India, Pakistan, Bangladesh and Uzbekistan. ITMA ASIA + CITME provides a unique platform to showcase technologies for customers directly in Asia. The VDMA member companies are looking forward to the coming edition of the fair from 14 to 18 October 2024 in Shanghai.”

The latest survey of VDMA members' subsidiaries in China gives reason to hope that the economic situation in the Chinese textile industry could also improve significantly in the second half of the year. In addition, European textile machinery manufacturers are urged to be present on the most important market and at the trade fair and to offer Asian customers most advanced technology for their demanding challenges.

Source:

VDMA e. V.
Textile Machinery

19.12.2023

Euratex Manifesto: 15 requests for competitiveness and resilience

2024 is a turning point for the European textiles and clothing industry: From 6 to 9 June 2024, European citizens will vote for a new European Parliament and, based on the results, a new European Commission will be formed. In view of this important election, EURATEX publishes a Manifesto, presenting 15 requests which will help to ensure a competitive European textiles and clothing industry.

The textile and apparel industry is making a substantial contribution to European wealth, jobs and growth. Europe counts 192,000 companies employing 1.3 million workers with a turnover of €167 billion and over €67 billion of exports. Entrepreneurship should be recognised as the foundation for a competitive textile industry, offering high quality and sustainable products, based on innovation, creativity and design. European policy makers should recognise such role to textiles and apparel companies and have an open dialogue to create better framework conditions to operate in the internal and global markets.

2024 is a turning point for the European textiles and clothing industry: From 6 to 9 June 2024, European citizens will vote for a new European Parliament and, based on the results, a new European Commission will be formed. In view of this important election, EURATEX publishes a Manifesto, presenting 15 requests which will help to ensure a competitive European textiles and clothing industry.

The textile and apparel industry is making a substantial contribution to European wealth, jobs and growth. Europe counts 192,000 companies employing 1.3 million workers with a turnover of €167 billion and over €67 billion of exports. Entrepreneurship should be recognised as the foundation for a competitive textile industry, offering high quality and sustainable products, based on innovation, creativity and design. European policy makers should recognise such role to textiles and apparel companies and have an open dialogue to create better framework conditions to operate in the internal and global markets.

To realise that vision, the industry and policy makers need to work together on a mix of policy measures and initiatives, which are coherent and offer a transparent and predictable framework for our companies, and make them more resilient and competitive.

These policies should focus around four points:

Develop and implement a “smart” EU industrial policy
Europe should create policies which enhance competitiveness, instead of creating administrative burdens. To EURATEX, each new piece of legislation should undergo a “competitiveness test” to critically look at the impact of the new rules. Europe should also create a favourable environment to promote education and jobs in the industry. The EU textile industry currently employees 1,3 million people, 30% of which is above 50 years old. A critical bottleneck for the textile industry is to attract (young) people and make sure these people have the right set of skills, to operate in a changing textile ecosystem. EURATEX also asks the EU to invest in innovation and digitalisation as they are key to the European competitive advantage. Not only, as the last years have proved, Europe should provide companies with access to sustainable energy at lower prices.

No sustainability without competitiveness
The EU Strategy for Sustainable Textiles is pushing our sector towards new business models with a lower environmental footprint. To realise that ambition, no less than 16 regulatory proposals are on the table, each of them with a different timetable, managed by different departments of the European Commission. EURATEX is committed to sustainability, but asks for economic realism. This set of new regulations needs to be coherent, enforceable, feasible and applicable for SMEs, and not push textile companies out of the market. Moreover, some member states are moving forward faster and some legislations will be decided at national level, creating fragmentation of the market. Such scenarios will hamper Europe and its possibilities to grow.

Ensure free and fair trade
With $224 billion in sold merchandise, Europe is the second major world exporters of textiles and clothes after China ($321 billion). It is therefore important that the global market should be open, free and fair for our industry to continue to thrive. Besides the support to FTAs in general, EURATEX wants to emphasise that all trade agreements should offer effective market access for EU companies and a level playing field in these markets. A free and open market should go hand in hand also with protection against free riders. The EU must always consider enforcement and enforceability when making new laws; it should also take action together with the member states for a better coordination with harmonised criteria for action among Customs Authorities.

Incentivise the Demand for sustainable textiles
Sustainable textile products typically come at a premium price, making it difficult for many consumers and buyers to purchase such products. Many surveys across Europe confirm that around 50% of interviewees do not purchase sustainable fashion products and the main reason is price. EURATEX believes that, to create a demand and help consumers to buy a (genuine) sustainable textile product, there should be standard requirements and fiscal incentives. Public authorities should also implement green public procurements, by increasing the importance of sustainability criteria in their evaluation grids.

08.12.2023

EURATEX welcomes approval of PanEuroMed rules of origin

EURATEX welcomes the unanimous vote in support of the new rules of origin under the PEM Convention, as a historic achievement. Facilitating trade and investments in the “PanEuroMed” region (covering 27 EU member states and 24 partner countries in the neighbourhood region)1 is top priority region for the EU, as trade with these countries accounted for €677 billion in 2023. For the EU textile and clothing sector, the region represents 35% of its exports and 21% of its imports.
 
In 2013 the European Commission adopted a package of proposals aimed at increasing trade between the European Union and neighbouring countries in the Pan-Euro-Mediterranean (PEM) region. The proposal introduced modernised rules of origin of the PEM convention, lifting the prohibition of duty-drawback and introducing the principle of “full cumulation”.

EURATEX welcomes the unanimous vote in support of the new rules of origin under the PEM Convention, as a historic achievement. Facilitating trade and investments in the “PanEuroMed” region (covering 27 EU member states and 24 partner countries in the neighbourhood region)1 is top priority region for the EU, as trade with these countries accounted for €677 billion in 2023. For the EU textile and clothing sector, the region represents 35% of its exports and 21% of its imports.
 
In 2013 the European Commission adopted a package of proposals aimed at increasing trade between the European Union and neighbouring countries in the Pan-Euro-Mediterranean (PEM) region. The proposal introduced modernised rules of origin of the PEM convention, lifting the prohibition of duty-drawback and introducing the principle of “full cumulation”.

Today, after ten years of intense negotiations which EURATEX supported, the European Commission reached a full and final agreement with all PEM partners. This is a landmark achievement that will unlock the full potential of the Euro-Mediterranean area as the biggest and most integrated region of advanced manufacturing and trading of sustainable textiles and clothing. The rules adopted today will accelerate the integration of T&C supply chains and boost T&C production and trade within the region, both in the East and Southern borders of the EU. In a moment when companies are looking at moving their production from Asia to nearby, like-minded and more reliable countries , it is very timely to have the PEM Convention implemented.

EURATEX’s President, Mr Alberto Paccanelli, commented: “This is a strategic trade deal that can help European companies recover from the multiple crisis which we face since 2020”. He continued “We call on the European Union to not stop here, but keep up the efforts to secure trade deals that are good for European companies and their competitive position in the world. The next objective should be the adoption of the EU-Mercosur Agreement and a conclusive settlement of all trade disputes with the United States”.    
 
According to Director General Dirk Vantyghem, “today’s unanimous vote in favour of the modernised PEM rules is good news for our industry.. We should now engage with these partner countries to fully exploit the potential of these new rules. EURATEX is ready to engage in an industrial dialogue with the companies from the PEM Countries to facilitate their transition to the new framework”.

1 The PanEuroMed contracting parties are: the EU, the EFTA States (Switzerland, Norway, Iceland and Liechtenstein), the Faroe Islands, the participants in the Barcelona Process (Algeria, Egypt, Israel, Jordan, Lebanon, Morocco, the territories of West Bank and Gaza, Syria, Tunisia and Turkey), the participants in the EU's Stabilisation and Association Process (Albania, Bosnia and Herzegovina, the Republic of North Macedonia, Montenegro, Serbia, Kosovo), the Republic of Moldova, Ukraine.

Source:

EURATEX 

17.11.2023

Alliance for European Flax-Linen and Hemp: Flax fibres for Sailing boats

The adoption of composite parts based on flax fibres by the Marine Industry continues to grow, with major OEMs as well as smaller shipyards now aiming to take advantage of the reduced carbon impact and impressive mechanical properties they can provide.

“Over the last ten or fifteen years, several innovative flax fibre boats have been built and the fibre has started to gain significant traction,” says Julie Pariset, Innovation & CSR Director at the Alliance for European Flax-Linen and Hemp. “In addition to the environmental benefits, manufacturers are realising significant technical and processing gains with flax fibre composites.”

“Flax is a very low-density fibre, with a high specific stiffness,” she explains. “It can be used to manufacture composite laminates with mechanical properties not dissimilar to typical E-glass composites and the coefficient of thermal expansion of a flax fibre epoxy part is also quite close to that of a carbon fibre part.” This allows the materials to work well in combined assemblies with carbon fibre composites and the flax parts are also highly impact resistant.

The adoption of composite parts based on flax fibres by the Marine Industry continues to grow, with major OEMs as well as smaller shipyards now aiming to take advantage of the reduced carbon impact and impressive mechanical properties they can provide.

“Over the last ten or fifteen years, several innovative flax fibre boats have been built and the fibre has started to gain significant traction,” says Julie Pariset, Innovation & CSR Director at the Alliance for European Flax-Linen and Hemp. “In addition to the environmental benefits, manufacturers are realising significant technical and processing gains with flax fibre composites.”

“Flax is a very low-density fibre, with a high specific stiffness,” she explains. “It can be used to manufacture composite laminates with mechanical properties not dissimilar to typical E-glass composites and the coefficient of thermal expansion of a flax fibre epoxy part is also quite close to that of a carbon fibre part.” This allows the materials to work well in combined assemblies with carbon fibre composites and the flax parts are also highly impact resistant.

Flax fibres also provide acoustic and vibration damping in composite applications, as well as providing a warm and aesthetically pleasing appearance below decks.

ecoRacer30
As a member of the Alliance for European Flax-Linen and Hemp, Bcomp, headquartered in Fribourg, Switzerland, has this year been working with Northern Light Composites (nlcomp), based in Monfalcone, northern Italy, on the creation of what is billed as the first fully recyclable nine-metre-long sailing boat – the ecoRacer30.

The boat is based on nlcomp’s proprietary rComposite technology – a combination of thermoplastic resins and BComp’s ampliTex high-performance natural fibre reinforcement fabrics and patented powerRibs technology.

It was built in a collaborative effort with the help of Barcelona-based Magnani Yachts, which took care of the composite manufacturing, and Sangiorgio Marine, which provided technical assistance as the boat was being assembled at its shipyard in Genova, Italy.

Magnani Yachts has subsequently become the first shipyard to hold an rComposite license and others are now being encouraged to adopt the technology.

The second ecoracer30 is currently under construction and has already been sold and nlcomp is planning to build a fleet of eight of these boats in time to enter a series of regattas in the summer of 2025.

Flax 27 Daysailer
Greenboats, based in Bremen, Germany, is another specialist in building boats from natural fibre composites and has this year launched the Flax 27 daysailer.

The lower hull of this vessel is also made from Bcomp’s ampliTex technical fabrics in combination with a sandwich core of recycled PET bottles. Using a vacuum infusion process, the fibres were integrated with a plant-based epoxy resin in order to further reduce the CO2 footprint of the vessel.

The light structure and modern shapes of the lower hull of the boat result in very fast, sharp and agile handling on the water.

Greenboats has also recently announced significant new backing from alliance member Groupe Depestele, which manages 13,000 hectares of flax land in Normandy, France.

Blue Nomad
A project in Switzerland has meanwhile proposed the use of flax fibre composites in solar-powered habitats designed for comfortable living on the oceans – as the world grapples with the frightening implications of climate change and rising sea levels.

As envisaged by students from Institut auf dem Rosenberg in St Gallen, Switzerland working with Denmark-based SAGA Space Architects, Blue Nomad structures would form modular blocks to establish large communities and oceanic farms.
 

Source:

Alliance for European Flax-Linen and Hemp

(c) AVK - Industrievereinigung Verstärkte Kunststoffe e. V.
14.11.2023

Successful SMCCreate 2023 Design Conference in Prague

Successful SMCCreate 2023 Design Conference in Prague

With over 60 participants from Europe and the USA the second edition of the SMCCreate Design Conference took place from November 7th to 8th in Prague. The conference was jointly organized by the AVK – Federation of Reinforced Plastics and the European Alliance for SMC BMC, promoting the use of SMC and providing design tools to designers for applying these versatile materials.

During the SMCCreate 2023 conference topics covered the wide spectrum of the design with fiber composite/composite components in SMC and BMC technology, from conceptual design, development, and scale-up, with a special emphasis on recycling and sustainability solutions. 18 speakers from various European countries showed how they address important market trends and changing customer needs, and which solutions their companies offered in terms of materials, performance and much more.

Successful SMCCreate 2023 Design Conference in Prague

With over 60 participants from Europe and the USA the second edition of the SMCCreate Design Conference took place from November 7th to 8th in Prague. The conference was jointly organized by the AVK – Federation of Reinforced Plastics and the European Alliance for SMC BMC, promoting the use of SMC and providing design tools to designers for applying these versatile materials.

During the SMCCreate 2023 conference topics covered the wide spectrum of the design with fiber composite/composite components in SMC and BMC technology, from conceptual design, development, and scale-up, with a special emphasis on recycling and sustainability solutions. 18 speakers from various European countries showed how they address important market trends and changing customer needs, and which solutions their companies offered in terms of materials, performance and much more.

As an introduction, speakers - including CTC/Airbus and Teijin - presented different possible applications for SMC and BMC components, including aircraft interiors, bicycle boxes, and applications in e-mobility. The topic of sustainability was broadly covered, highlighting recycling solutions and experiences (Siemens, IDI, OC, AOC), the use of renewable raw materials, as well new LCA models developed by the SMC BMC Alliance (LCS),

Specifically for designers, the use of the SMC flow and curing modelling was presented (ESI, OC), SMC positioning vs. aluminium (Spartners). The second day concluded with contributions on process optimization options for component production, including speeches by Dieffenbacher, Netzsch and EBG.

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.

North American Nonwovens Industry Outlook 2022-2027 (c) INDA
07.11.2023

North American Nonwovens Industry Outlook 2022-2027 released

INDA, the Association of the Nonwoven Fabrics Industry, has released a new report, North American Nonwovens Industry Outlook, 2022-2027. This report is the twelfth edition detailing demand data for 2017 through 2022, with forecasts to 2027 and provides analysis across end-use markets through 2027.

It includes:

INDA, the Association of the Nonwoven Fabrics Industry, has released a new report, North American Nonwovens Industry Outlook, 2022-2027. This report is the twelfth edition detailing demand data for 2017 through 2022, with forecasts to 2027 and provides analysis across end-use markets through 2027.

It includes:

  • Economic and population drivers contributing to market growth over the next 5 years for markets in the U.S., Mexico, and Canada.
  • Disposable, Filtration, Wipes, Medical and Other applications.
  • Long-Life durable sectors for Transportation, Building and Construction, Furnishings, Geo and Agro Textiles, and Apparel.
  • Key drivers for the demand models and reasons for market upsets like the COVID pandemic.
  • A summary of historical and future trends that will affect the nonwovens market.

The report provides analysis across all nonwoven end-use markets, providing a comprehensive and accurate view of the total North American nonwovens industry. INDA redesigned this report to support strategic business planning and decision-making. The projections in the report were made by analyzing current market trends and drivers to highlight the market potential in terms of dollar value, units, and volume in both square meters and tonnage.

The new North American Nonwovens Industry Outlook report is available at 6,000.00 $, the discounted member price is 4,500.00

More information:
Market report INDA
Source:

Association of the Nonwoven Fabrics Industry

10.10.2023

Textile & Fashion Forum Helsinki 2023

The Textile & Fashion Forum Helsinki 2023, organized by Finnish Textile & Fashion and EURATEX, highlights the discourse on sustainable practices within the textile and fashion industry. This two-day event, scheduled for 26-27 October at the Little Finlandia event center in Helsinki, will include a day of curated company visits.

Finland’s leading textile and fashion forum will showcase the industry's pioneering companies and their pursuit of a sustainable and resilient future. With insightful discussions, inspiring speakers, and thrilling business cases, the event drives transformation and sets new benchmarks for the textile and fashion sector.

The Textile & Fashion Forum Helsinki 2023, organized by Finnish Textile & Fashion and EURATEX, highlights the discourse on sustainable practices within the textile and fashion industry. This two-day event, scheduled for 26-27 October at the Little Finlandia event center in Helsinki, will include a day of curated company visits.

Finland’s leading textile and fashion forum will showcase the industry's pioneering companies and their pursuit of a sustainable and resilient future. With insightful discussions, inspiring speakers, and thrilling business cases, the event drives transformation and sets new benchmarks for the textile and fashion sector.

The Textile & Fashion Forum Helsinki 2023 will focus on critical industry themes. The transformation of the textile and fashion industry relies on three key pillars: the creation of different circular business models matching growth with sustainability, a green and digital transition where information technology is necessary to deliver sustainability, and scaling the business, as how start-ups can make a leap and big companies can evolve their growth strategies. These three themes will be discussed in depth during the event.

The speaker lineup, drawn from Finland, Europe and beyond, demonstrates the expertise connecting on this platform. Noteworthy figures include Tiina Alahuhta-Kasko, President & CEO of Marimekko; Kai Mykkänen, Minister of Climate and the Environment of Finland; Marcus Hartmann, Head of Public Affairs & Sustainability at H&M; Liljana K. Forssten, Range Strategist at IKEA; and Virginijus Sinkevičius, European Commissioner (on video).

Source:

Euratex & Finnish Textile & Fashion

05.10.2023

EURATEX and CIE warn EU Presidency about de-industrialised Europe

Ahead of the extra-ordinary Council on 6 October in Granada, EURATEX President, Alberto Paccanelli, and CIE President, Jose Vte Serna, call on the EU Presidency to develop a new competitiveness strategy, which can relaunch the European industry and ensure it will remain competitive in the decades to come. This means bringing together trade, energy, state aid and sustainability policies into a single, integrated, comprehensive approach, which can support a robust and modern European manufacturing industry.  
 
To consolidate a strong industrial structure in Europe, the Union should

Ahead of the extra-ordinary Council on 6 October in Granada, EURATEX President, Alberto Paccanelli, and CIE President, Jose Vte Serna, call on the EU Presidency to develop a new competitiveness strategy, which can relaunch the European industry and ensure it will remain competitive in the decades to come. This means bringing together trade, energy, state aid and sustainability policies into a single, integrated, comprehensive approach, which can support a robust and modern European manufacturing industry.  
 
To consolidate a strong industrial structure in Europe, the Union should

  1. secure the supply of clean energy at a competitive cost;
  2. support innovation and foster the necessary talent pool and
  3. be more assertive in achieving an international level-playing field on sustainability, based on the European model.  

During the past few years the implementation of incoherent and conflicting objectives under the trade, energy, industrial and sustainability policy has been observed. As a matter of fact, while the circular economy promised to be a recipe for a competitive industry of the future, the likelihood of pushing the EU industry out of the market and driving investment elsewhere than in Europe is very high. If this approach were to continue in the next years, it will result in a de-industrialised Europe, depending on imports from abroad. Such a Europe would be more exposed to geopolitical turmoil, with no agency to deliver its vision of peace, well-being and a healthy environment to its citizens.

It is fundamental for Europe to pursue a more coherent set of policies that put the competitiveness of its domestic industry at the core. In this context, all the industrial manufacturing sectors should be in the scope, including the textile industry, given its importance in providing essential products and applications to our society. A first impactful action that can be taken in this direction, would be to expand the scope of the Net-Zero Industry Act (NZIA) to include the textiles and clothing industry.
 
The history of European industry is fully woven in the birth and expansion of the European textiles industry since the XVIII century. Still today, the European textiles and clothing industry holds a pivotal position in the market, encompassing a diverse range of sectors and applications. In terms of employment, our industry creates 1,3 million direct jobs in Europe, encompassing a wide range of roles, from design and production to distribution and retail. European textiles have a wide range of applications, the most common one is of course clothing and fashion. The industry has a long history of producing high-quality apparel, with various regions specializing in specific niches.
 
Beyond clothing, there is a wide range of industrial sectors were textiles play an essential role, including  Automotive (used for upholstery, interior components, and even lightweight composite materials), Aircraft and Shipbuilding (where textiles are employed for their lightweight and high-strength properties, to enhance fuel efficiency, reduce emissions, and improve overall performance), Building and Construction (insulation, roofing, geotextiles, and architectural textiles), or Personal Protective Equipment, for medical personnel, firefighters, police and army officers. This includes masks, gowns, uniforms, helmets, and fire-resistant clothing, ensuring safety in hazardous environments.
 
Textiles are essential components of our society and our well-being. It is key for Europe to maintain its capacity to manufacture high-quality, sustainable and high-technology textiles.  With this in mind, the competitiveness policy of the future and the related funds to support it, should include the textile ecosystem in its scope.  

 

More information:
Euratex EU council Policy Hub
Source:

Euratex

Mittelstand-Digital Zentrum Smarte Kreisläufe und Kölner Showroom eröffnet (c) Reinhard Rosendahl
20.09.2023

Mittelstand-Digital Zentrum Smarte Kreisläufe und Kölner Showroom eröffnet

Die Transformation hin zu einer digitalen und klimaneutralen Industrie ist auch für kleine und mittlere Unternehmen in vollem Gange und wird deren betrieblichen Alltag nachhaltig beeinflussen. Wie diese Veränderungen konkret aussehen und welche potentiellen Auswirkungen sie haben werden, diskutierten rund 70 Gäste aus Politik, Mittelstand und Start-ups anlässlich der Eröffnung vom Mittelstand-Digital Zentrum Smarte Kreisläufe.

Dr. Franziska Brantner, Parlamentarische Staatssekretärin im Bundesministerium für Wirtschaft und Klimaschutz, betonte in ihrem Grußwort, dass zirkuläre Wertschöpfungsketten in Zukunft wichtiger denn je sein werden. „Mit dem Mittelstand-Digital Zentrum Smarte Kreisläufe und seinem heute in Köln eröffneten Showroom erhalten KMU eine wichtige Unterstützung bei der nachhaltigen digitalen Transformation. Mit Blick auf die Erreichung der Klimaziele ist eine Erhöhung der Ressourceneffizienz unabdingbar. Hierzu bietet das Zentrum mit seiner Ausrichtung auf zirkulare Wertschöpfungsketten zukunftsweisende Angebote für KMU, Start-ups und Handwerk.“

Die Transformation hin zu einer digitalen und klimaneutralen Industrie ist auch für kleine und mittlere Unternehmen in vollem Gange und wird deren betrieblichen Alltag nachhaltig beeinflussen. Wie diese Veränderungen konkret aussehen und welche potentiellen Auswirkungen sie haben werden, diskutierten rund 70 Gäste aus Politik, Mittelstand und Start-ups anlässlich der Eröffnung vom Mittelstand-Digital Zentrum Smarte Kreisläufe.

Dr. Franziska Brantner, Parlamentarische Staatssekretärin im Bundesministerium für Wirtschaft und Klimaschutz, betonte in ihrem Grußwort, dass zirkuläre Wertschöpfungsketten in Zukunft wichtiger denn je sein werden. „Mit dem Mittelstand-Digital Zentrum Smarte Kreisläufe und seinem heute in Köln eröffneten Showroom erhalten KMU eine wichtige Unterstützung bei der nachhaltigen digitalen Transformation. Mit Blick auf die Erreichung der Klimaziele ist eine Erhöhung der Ressourceneffizienz unabdingbar. Hierzu bietet das Zentrum mit seiner Ausrichtung auf zirkulare Wertschöpfungsketten zukunftsweisende Angebote für KMU, Start-ups und Handwerk.“

Für Anja Merker, Geschäftsführerin des Zentrums, ist klar: „Digitalisierung, Nachhaltigkeit und Klimaschutz sind die großen Querschnittsthemen unserer Zeit. Unsere Expertinnen und Experten unterstützen kleine und mittlere Unternehmen konkret und kostenfrei, um Digitalisierungspotentiale im Unternehmen zu erfassen und Projekte erfolgreich umzusetzen. Von Informationsveranstaltungen über Labtouren bis hin zu Qualifizierungsworkshops: Wir ermöglichen smarte Kreisläufe für einen smarten Mittelstand."

Transferpartner des Zentrums ist DER MITTELSTANDSVERBUND, dessen Mitglieder ca. 230.000 mittelständische Unternehmen sind, die in rund 310 Verbundgruppen aus rund 45 Branchen organisiert sind. Tim Geier, Geschäftsführer DER MITTELSTANDSVERBUND: “Die Anforderungen an Unternehmen und ihre Mitarbeitenden haben sich aufgrund der verstärkten Digitalisierung vieler Arbeitsprozesse erheblich verändert. Neue Herausforderungen bedürfen neuer Unterstützungsangebote, um Verbundgruppen und ihre Anschlusshäuser bei den aktuellen Themen Künstliche Intelligenz, Big Data, Kreislaufwirtschaft oder New Work zu begleiten.” Nach der neuesten Verbandsumfrage sehen die Mitglieder den Einsatz von Künstlicher Intelligenz mehrheitlich positiv. „Jetzt kommt es darauf an, die Unternehmen beim Einsatz von Künstlicher Intelligenz zu unterstützen und Innovationsideen zu konkreten Anwendungen werden zu lassen.“

Mit welchen Lösungsansätzen neues Arbeiten in der digitalen Welt möglich ist, zeigte Andrea Schmitz von der Berliner Transformationsberatungsagentur St. Oberholz in ihrer Keynote „New Work im Wandel“ auf und betonte, dass neue Formen von Zusammenarbeit vor allem wirksam sein müssten. „New Work ist nichts wert, wenn der Mensch und das Unternehmen in diesem „Neu" nicht wirksam arbeiten können.“

Mit dem neu eröffneten Showroom am Kölner Standort vom MITTELSTANDSVERBUND werden die Angebote des Zentrums und dessen weitere Partner Gesamtverband textil+mode, Deutsche Institute für Textil- und Faserforschung Denkendorf (DITF), Institut für Textiltechnik der RWTH Aachen University (ITA) und Sächsisches Textilforschungsinstitut (STFI) für Gäste erlebbar gemacht. Mittelständische Unternehmen erhalten so praxisbezogene Einblicke, welche zukunftsrelevante Technologien sie dabei unterstützen können, sich zukunftssicher aufzustellen.

Das Mittelstand-Digital Zentrum Smarte Kreisläufe gehört zu Mittelstand-Digital. Mit dem Mittelstand-Digital Netzwerk unterstützt das Bundesministerium für Wirtschaft und Klimaschutz die Digitalisierung in kleinen und mittleren Unternehmen und dem Handwerk.

Source:

Gesamtverband textil+mode

15.08.2023

Eröffnung von Mittelstand-Digital Zentrum Smarte Kreisläufe & Showroom

Am Montag, 18. September 2023 findet von 12 - 16 Uhr die Eröffnung des Mittelstand-Digital Zentrums Smarte Kreisläufe und des Showrooms in Köln statt.

Eine zunehmende Digitalisierung vieler Arbeitsprozesse hat die Anforderungen an Unternehmen stark verändert. Gerade für kleine und mittlere Unternehmen wirft die digitale Transformation viele Fragen auf. Nicht zuletzt die Frage nach neuen Modellen der Arbeit, Technologien und der Kooperation, mit denen die Herausforderungen der Zukunft bewältigt werden können.

Welchen Beitrag das Mittelstand-Digital Zentrum Smarte Kreisläufe leisten und Mittelständler auf dem Weg zum Unternehmen der Zukunft unterstützen kann, wird anlässlich der offiziellen Eröffnung des Mittelstand-Digital Zentrums Smarte Kreisläufe und des Showrooms des Transferpartners DER MITTELSTANDSVERBUND – ZGV im FRÜH am Dom in Köln vorgestellt.

Am Montag, 18. September 2023 findet von 12 - 16 Uhr die Eröffnung des Mittelstand-Digital Zentrums Smarte Kreisläufe und des Showrooms in Köln statt.

Eine zunehmende Digitalisierung vieler Arbeitsprozesse hat die Anforderungen an Unternehmen stark verändert. Gerade für kleine und mittlere Unternehmen wirft die digitale Transformation viele Fragen auf. Nicht zuletzt die Frage nach neuen Modellen der Arbeit, Technologien und der Kooperation, mit denen die Herausforderungen der Zukunft bewältigt werden können.

Welchen Beitrag das Mittelstand-Digital Zentrum Smarte Kreisläufe leisten und Mittelständler auf dem Weg zum Unternehmen der Zukunft unterstützen kann, wird anlässlich der offiziellen Eröffnung des Mittelstand-Digital Zentrums Smarte Kreisläufe und des Showrooms des Transferpartners DER MITTELSTANDSVERBUND – ZGV im FRÜH am Dom in Köln vorgestellt.

Keynote-Vortragende ist Andrea Schmitz, die als Managing Partner der Berliner Transformationsberatung St. Oberholz, systemisch ausgebildete Organisations- und Teamentwicklerin, (Agile) Coach und SCRUM-Master eine Expertise für die Themen der ganzheitlichen Transformationsbegleitung und Teamentwicklungen besitzt. In ihrem Vortrag mit dem Titel „Neues Arbeiten für die digitale Welt: Die Bedeutung von New Work im Wandel“ spricht sie über Herausforderungen und Lösungsansätze, wie mittelständische Unternehmen in Zeiten ständiger Transformation wirksam agieren können. Sie erklärt, welche Fähigkeiten, Kompetenzen und Einstellungen sowohl Führungskräfte als auch Mitarbeitende benötigen, um in der digitalen Ära nachhaltig erfolgreich zu sein und zukunftsfähig zu bleiben.

Eine anschließende Podiumsdiskussion greift das Thema auf und beleuchtet mit Gästen aus Wirtschaft, Politik und Wissenschaft diskutieren, vor welchen Herausforderungen Unternehmen aktuell stehen, wie sie sich den neuen Aufgaben stellen und welchen Beitrag das Mittelstand-Digital Zentrum Smarte Kreisläufe leisten kann.

Source:

Gesamtverband der deutschen Textil- und Modeindustrie e. V.

(c) Mittelstand-Digital Zentrum Smarte Kreisläufe
02.08.2023

Mittelstand-Digital Zentrum: Innovative Lösungen für textile Unternehmen

Am 17. und 18. Juli 2023 informierten sich Teilnehmerinnen und Teilnehmer der Veranstaltung „Textil Innovativ – Technologien für Mobilität und Schutz“ über Trends, Herausforderungen und Lösungen für moderne Mobilität sowie Persönliche Schutzausrüstung (PSA) in Verbindung mit Digitalisierung und Recycling. Zudem wurde zur „Datenbasierten Wertschöpfung in der Textilindustrie“ diskutiert.

Mobilität in der Zukunft ist digital, komfortabel und natürlich nachhaltig. Der Schalter für die Sitzheizung ist in die textile Oberfläche der Mittelkonsole integriert. Das Gewebe der Sitzfläche heizt oder kühlt – je nach Bedarf. Der Dachhimmel leuchtet. Die Karosserie ist leicht und stabil, um Sprit zu sparen und trotzdem bei Unfällen zu schützen. Referenten und Aussteller zeigten, wie sie den besonderen Anforderungen an Maschinen, Produktionsprozesse sowie die neuen Materialien selbst gerecht werden.

Am 17. und 18. Juli 2023 informierten sich Teilnehmerinnen und Teilnehmer der Veranstaltung „Textil Innovativ – Technologien für Mobilität und Schutz“ über Trends, Herausforderungen und Lösungen für moderne Mobilität sowie Persönliche Schutzausrüstung (PSA) in Verbindung mit Digitalisierung und Recycling. Zudem wurde zur „Datenbasierten Wertschöpfung in der Textilindustrie“ diskutiert.

Mobilität in der Zukunft ist digital, komfortabel und natürlich nachhaltig. Der Schalter für die Sitzheizung ist in die textile Oberfläche der Mittelkonsole integriert. Das Gewebe der Sitzfläche heizt oder kühlt – je nach Bedarf. Der Dachhimmel leuchtet. Die Karosserie ist leicht und stabil, um Sprit zu sparen und trotzdem bei Unfällen zu schützen. Referenten und Aussteller zeigten, wie sie den besonderen Anforderungen an Maschinen, Produktionsprozesse sowie die neuen Materialien selbst gerecht werden.

Auch das Thema Persönliche Schutzausrüstung (PSA) birgt für Unternehmen Herausforderungen. Viele Funktionen, wie beispielsweise Hitzeschutz, erfordern eine spezielle chemische Ausrüstung der Textilien. Diese unterliegt jedoch häufig umweltschutzrechtlichen Einschränkungen und Verboten. Worauf Unternehmen bei der Produktion von PSA achten müssen, wurde ebenfalls erörtert.

Welche Potenziale die Digitalisierung für genau diese Anforderungen bietet, wurde in der Veranstaltung ebenfalls deutlich. Der Digitale Produktpass kommt. Er ist Teil eines EU-weiten Maßnahmenpakets zur Förderung von Ökodesign und Ressourceneffizienz und soll den Verbraucher informieren, wo das Produkt herkommt, woraus es besteht oder wie man es reparieren kann. Die Umsetzung betrifft alle Branchen und Dienstleistungen, mit weitreichenden Auswirkungen auf die unternehmerischen Geschäftsprozesse. Das setzt eine gewaltige Datenmenge voraus. Wie datenbasierte Wertschöpfung in der Textilindustrie funktioniert, war Thema in der abschließenden Diskussionsrunde.  

An welchen Stellen das Mittelstand-Digital Zentrum Smarte Kreisläufe kleine und mittlere Unternehmen unterstützen kann, erläuterte die Geschäftsführerin Anja Merker in einem Pitch-Beitrag sowie an einem Informationsstand vor Ort. Das Angebot des Zentrums umfasst nicht nur reine Wissensvermittlung zum Unternehmen der Zukunft in Verbindung mit Digitalisierung und Künstliche Intelligenz. Die Partner geben Orientierung und bilden Ihre Mitarbeiter weiter, entwickeln gemeinsam Ideen in Workshops und erarbeiten mit Ihnen Konzepte, die Sie im Unternehmen umsetzen können.

Source:

Gesamtverband der deutschen Textil- und Modeindustrie e. V. / Mittelstand-Digital Zentrum Smarte Kreisläufe

(c) Messe Düsseldorf GmbH
19.06.2023

A+A Expert Talk: Focus on sustainability and the circular economy

  • The A+A Expert Talks head into their third round

On 20 June 2023 between 10.00 am and 11.30 am experts from the fields of sustainability, circular economy, environmental protection as well as corporate fashion and product management will be presenting lectures and discussing the topics of sustainability in supply chains, standardisation and quality seals as well as the associated challenges and solutions in cooperation with German Fashion. They will thereby provide a platform for the exchange of knowledge, experience and innovative approaches.

The focus on sustainability and the circular economy reflects the growing relevance of these topics in the world of work. More and more companies recognise the need to make their business practices more sustainable and optimise the use of resources.

This Expert Talk will be presented by Irina Olm, In-House Lawyer & Counsel of GermanFashion Modeverband Deutschland e.V. and Expert for Circular Economy and CSR, who will contribute her know-how on the European level.  

  • The A+A Expert Talks head into their third round

On 20 June 2023 between 10.00 am and 11.30 am experts from the fields of sustainability, circular economy, environmental protection as well as corporate fashion and product management will be presenting lectures and discussing the topics of sustainability in supply chains, standardisation and quality seals as well as the associated challenges and solutions in cooperation with German Fashion. They will thereby provide a platform for the exchange of knowledge, experience and innovative approaches.

The focus on sustainability and the circular economy reflects the growing relevance of these topics in the world of work. More and more companies recognise the need to make their business practices more sustainable and optimise the use of resources.

This Expert Talk will be presented by Irina Olm, In-House Lawyer & Counsel of GermanFashion Modeverband Deutschland e.V. and Expert for Circular Economy and CSR, who will contribute her know-how on the European level.  

Benjamin Helfritz, Head of Quality in Digital and Green Transformation, DIN – German Institute for Standardisation, will introduce participants to the new standards for the Green Transition.  
The Digital Product Passport (DPP) is needed for both the green and digital transition. However, it will only achieve its full added value if interoperability is ensured between existing and emerging systems. The use of the DPP promotes more sustainability and digital progress.

Henk Vanhoutte, Secretary General, European Safety Federation (ESF) and Lucia Mendori, Regulatory Affairs Associate / Chair ESF Working Group Sustainability will present practical examples and concrete application factors for sustainable PPE as well as solutions for sustainable jobwear. They will provide an overview of survey results from their members regarding various sustainability aspects – pointing to how the industry is treating this important topic but also flagging up the limits to the sustainability of PPE.

Lena Bay Høyland, Product Director of the Swedish workwear manufacturer Fristads Kansas will share the sustainability strategy of her company which has committed to minimise its environmental impact by targets and effective measures. The progress made by Fristads Kansas was measured using concrete figures and audits. This is a use case highlighting the innovations and challenges associated with sustainable jobwear.

By organising the Expert Talks the leading international trade fair A+A jointly with its strategic partners from the German Federal Association for Occupational Safety and Health (Basi), Fraunhofer IPA, German Fashion (Modeverband Deutschland e.V.), DGUV (Germany Statutory Accident Insurance), BAuA (Federal Agency for Occupational Safety and Health), BMAS (Ministry of Labour and Social Affairs), IVPS Interessenverbund Persönliche Schutzausrüstung e.V. (PPE Stakeholder Association) as well as IFA (Institute for Occupational Safety) will provide its community with a networking and information platform.

13.06.2023

Three Finalists Announced for the 2023 World of Wipes Innovation Award®


2XL Corporation, Avgol Nonwovens, and Yowel to compete for Award
INDA, the Association of the Nonwoven Fabrics Industry, announced the three finalists for the World of Wipes Innovation Award®. The Award will be presented at the 17th annual World of Wipes® (WOW) International Conference, July 17-20, at the Atlanta Marriott Marquis in Atlanta, Georgia.    

The three products vying for this Award are a cleaning and disinfecting device from 2XL Corporation, a wipe utilizing biotransformation technology from Avgol Nonwovens, and a reusable towel dispensing system from Yowel.

The winner will be announced on July 20th at 11 am. The three companies competing for the Award are:


2XL Corporation, Avgol Nonwovens, and Yowel to compete for Award
INDA, the Association of the Nonwoven Fabrics Industry, announced the three finalists for the World of Wipes Innovation Award®. The Award will be presented at the 17th annual World of Wipes® (WOW) International Conference, July 17-20, at the Atlanta Marriott Marquis in Atlanta, Georgia.    

The three products vying for this Award are a cleaning and disinfecting device from 2XL Corporation, a wipe utilizing biotransformation technology from Avgol Nonwovens, and a reusable towel dispensing system from Yowel.

The winner will be announced on July 20th at 11 am. The three companies competing for the Award are:

Windup by 2XL Corporation
Meet the Windup: a groundbreaking new device that can clean and disinfect your home using a self-advancing microfiber roll that you never have to touch. Just one roll will clean your kitchen over 50 times. An innovative one-touch revolving roll and a versatile spray system that allows use of your favorite floor cleaner or our specially formulated disinfecting solution. No more stopping to change expensive pads or change filthy water. Get wound up for Windup.

Nonwoven wipe using biotransformation technology by Avgol Nonwovens
This innovative spunlace wipe utilized advanced biotransformation technology developed jointly by Indorama Ventures and Polymateria. Meeting the BSI PAS 9017 specification, this wipe in the event it becomes fugitive, and exposed to heat, sunlight, air and moisture will transform into a harmless, bioavailable wax at its end-of-life, eliminating microplastic pollution. Compatible with mechanical recycling and combatting ‘fugitive’ waste, this wipe represents a significant leap towards eco-friendly, sustainable nonwoven hygiene products.

The Yowel™ System by Yowel
Ready to help the earth and save money…every day? Yowel is a patented system for dispensing reusable towels. Instead of a roll of paper towels, place a Yowel full of reusable towels into your paper towel holder – or choose the countertop model, and you’re immediately reducing your paper towel consumption.  The Yowel System has 40 reusable towels and a mesh bag for used towels. Save money and help Mother Nature.

INDA’s Technical Advisory Board selected the finalists based on the creativity, uniqueness, and technical sophistication employed in finding novel ways to expand the utilization of nonwovens. Categories considered for the award were wipes related raw materials, roll goods, converting, packaging, active ingredients, binders, additives, and end-use products.

Nice-Pak’s SecureFLUSH® Technology Flushable Wipes received the 2022 World of Wipes Innovation Award for their unique, 100% cellulose nonwoven that is strong enough to clean, yet break apart rapidly, when flushed. A specialty “lock and key” design of plant-based fibers and formula leverages patent-pending technology to break apart five times faster than the leading brand of two-ply toilet paper and ensure responsible care of plumbing and wastewater. SecureFLUSH® Technology Flushable wipes are available in Walmart, Amazon, and at Nicencleanwipes.com.

More information:
INDA WOW nonwovens World of Wipes
Source:

INDA

09.06.2023

EURATEX: Meeting about Industry 5.0 concept

On the occasion of EURATEX’ General Assembly held in Milan on 7 June, the European textile industry  discussed the relationship between innovation, sustainability and people in the industry of tomorrow. EURATEX members welcomed the Textiles Transition Pathway, released on 6 June by the Commission, as a valuable roadmap to ensure a successful green and digital transition. The meeting in Milan was also the occasion to strengthen links with textile machine manufacturers, gathering at ITMA 2023.

Hosted by Sistema Moda Italia (SMI), EURATEX meetings addressed the crucial issue of how to develop new competitive business models for the future, following the Industry 5.0 concept. In 2021, the European Commission launched “Industry 5.0”, which puts the wellbeing of the worker at the centre of the production process and the use of new technologies to provide prosperity beyond jobs and growth, while respecting the production limits of the planet.

On the occasion of EURATEX’ General Assembly held in Milan on 7 June, the European textile industry  discussed the relationship between innovation, sustainability and people in the industry of tomorrow. EURATEX members welcomed the Textiles Transition Pathway, released on 6 June by the Commission, as a valuable roadmap to ensure a successful green and digital transition. The meeting in Milan was also the occasion to strengthen links with textile machine manufacturers, gathering at ITMA 2023.

Hosted by Sistema Moda Italia (SMI), EURATEX meetings addressed the crucial issue of how to develop new competitive business models for the future, following the Industry 5.0 concept. In 2021, the European Commission launched “Industry 5.0”, which puts the wellbeing of the worker at the centre of the production process and the use of new technologies to provide prosperity beyond jobs and growth, while respecting the production limits of the planet.

The keynote speakers, Francesco Pinto (Chairman, Yamamay) and Claudio Cavacini (Director of Retail Industry Solutions & Strategy, Salesforce), presented how the digital transformation is affecting companies in the retail industry and how they should adapt to maintain their competitive edge. A panel session of textile machinery manufacturers debated how their companies can help delivering this transformation through state of the art machineries. They all agreed that it requires common efforts by all actors and stakeholders along the textile value chain and public support to make the necessary investments. According to Enzo Maurer, ITMA President, ITMA 2023 in Milan will exactly showcase excellence in innovation and new available technologies to make a leap forward in sustainability.

According to Sergio Tamborini, "we are particularly honored to host this event organized by Euratex, the association which is the voice of the European textile industry and its demands, especially those concerning the circular economy. Sistema Moda Italia wants to play its part and there are priorities, from legislation on extended producer responsibility (EPR) in Italy to eco-design, where textiles and clothing will act as a testing ground. SMI's goal will be to continue to encourage the debate on circularity  promoting it in all institutional settings aiming to a growing sustainable  supply chain.”

Alberto Paccanelli, EURATEX President added: “Today’s discussions showed that we are ready to take up new challenges. Nevertheless, this  transition towards a textiles 5.0 can only happen with the support of all actors, from policy makers to retailers. Today’s meeting was also the occasion to review the EU transition pathway for the textiles ecosystem, published yesterday by the European Commission. The pathway is the perfect example of a co-creation process between the European institutions and the stakeholders. We hope that other EU initiatives or legislative proposals will follow the same co-creative process.”

Source:

EURATEX

01.06.2023

Euratex criticizes European Parliament: No balance between sustainability and competitiveness

June 1, the European Parliament has adopted its Report on an EU Strategy for Sustainable and Circular Textiles. The Report wants to step up the EU’s ambition towards sustainability and circularity even further, but it has failed to recognise the strategic role of the European textile industry to scale up sustainability, nor to appreciate the global competitive threat which our companies are facing.

Director General Dirk Vantyghem commented on the MEP Report: “We welcome the strong interest of the European Parliament in the textile and fashion industry, but encourage MEPs to develop a balanced vision which reconciles sustainability and competitiveness. Developing a new business model for our industry requires carefully crafted legislation at global level, and an open dialogue between the industry, the brands and the consumer.”

June 1, the European Parliament has adopted its Report on an EU Strategy for Sustainable and Circular Textiles. The Report wants to step up the EU’s ambition towards sustainability and circularity even further, but it has failed to recognise the strategic role of the European textile industry to scale up sustainability, nor to appreciate the global competitive threat which our companies are facing.

Director General Dirk Vantyghem commented on the MEP Report: “We welcome the strong interest of the European Parliament in the textile and fashion industry, but encourage MEPs to develop a balanced vision which reconciles sustainability and competitiveness. Developing a new business model for our industry requires carefully crafted legislation at global level, and an open dialogue between the industry, the brands and the consumer.”

EURATEX supports the EU Textile Strategy, as it was presented over a year ago by the European Commission. The 160.000 European textile companies are committed to invest in sustainability, develop new circular business models and produce high quality textile products – not just in fashion, but also in home and medical textiles, construction, agriculture or cars. To do so, indeed a new regulatory framework is needed, with clear definitions, coherent rules and effective controls. But also, the companies should be able to comply with these rules and remain globally competitive.

The EP Report has failed to respect that balance between sustainability and competitiveness. Instead, it suggests even more rules and restrictions, totally disregarding the current economic challenges caused by high energy prices, loss in consumer confidence and assertive trade partners. Putting the bar even higher will simply mean that the European textile industry will be pushed out of the market, resulting in a bigger environmental footprint and increased dependency on foreign supplies. Quite the opposite of what the EU wants to achieve with its open strategic autonomy plans.

The Report also fails to differentiate between textile products. There is a mix up between fashion and technical textiles, between products made in Europe and outside, between high quality and durable products and low-quality items. It is regretful that the European Parliament did not make that distinction and simply refers to “textiles” as a general cause of concern, without acknowledging e.g. the high quality products, made by European textile and fashion companies.

The Report puts a strong responsibility on the supply side – the industry and the brands – and does not sufficiently address the role of the consumer. Initiatives therefore are essential to create a stronger demand for sustainable textiles, which includes better communication and transparency (avoid greenwashing), fiscal measures, green public procurement and better control of online marketplaces.

On a positive note, the EP Report does recognise the importance to invest in research and innovation, to support reskilling and upskilling, the need of scaling up circular economy and pay attention to the needs of SMEs. EURATEX has always insisted that such massive transition can only be successful if accompanied by significant and dedicated support programmes. The EU Textiles Transition Pathway should offer a clear perspective in this regard.

Source:

Euratex

02.03.2023

VDMA: Way2ITMA

100 days before ITMA 2023 in Milan, VDMA Textile Machinery launched its “Way2ITMA” webinar series. “Transforming the World of Textiles: efficient – digital – circular”. Under this heading, VDMA technology providers will present their solutions along the value chain.

Speakers of the virtual event were Dr. Janpeter Horn, Chairman of the VDMA Textile Machinery Association and Managing Director of August Herzog Maschinenfabrik, Dirk Vantyghem, Director General, EURATEX, Francis Elias Junker, Area Sales Manager, Andritz Laroche and Tanja Karila, Chief Marketing Officer, Infinited Fiber Company.

With regard to the EU strategy for sustainable and circular textiles, Dr. Horn said: “This topic concerns all of us, consumers and producers. We as machinery builders position ourselves as enablers. We want to be part of the solution of this ambitious project”.

100 days before ITMA 2023 in Milan, VDMA Textile Machinery launched its “Way2ITMA” webinar series. “Transforming the World of Textiles: efficient – digital – circular”. Under this heading, VDMA technology providers will present their solutions along the value chain.

Speakers of the virtual event were Dr. Janpeter Horn, Chairman of the VDMA Textile Machinery Association and Managing Director of August Herzog Maschinenfabrik, Dirk Vantyghem, Director General, EURATEX, Francis Elias Junker, Area Sales Manager, Andritz Laroche and Tanja Karila, Chief Marketing Officer, Infinited Fiber Company.

With regard to the EU strategy for sustainable and circular textiles, Dr. Horn said: “This topic concerns all of us, consumers and producers. We as machinery builders position ourselves as enablers. We want to be part of the solution of this ambitious project”.

Dirk Vantyghem introduced the core issues of the EU textile strategy launched in 2022, which is the most ambitious plan ever, to push the textile sector towards sustainability and transparency, and promote a new circular business model. If wrongly designed, that new framework may collapse the European textile value chain. But if done rightly, the changes ahead could bring a paradigm shift in the sector, where competitiveness is no longer based on price only, but also on sustainability and innovation, explained Vantyghem.

Francis Elias Junker showed high level of expertise for mechanical textile recycling for both spinning and nonwovens industries that Andritz has. The company has a diversity of solutions to offer and several cooperation partners, covering the value chain from recovery of fiber to the chemical modification and preparation for the production of yarn.

Tanja Karila gave an overview of how Infinited Fiber is turning textile waste into new fibers. Patented technology turns post-consumer textile waste into brand new premium quality fibers for the textile industry. The textile-to-textile recycling technology captures the value in waste that would otherwise be landfilled or burned.

More information:
ITMA 2023 Sustainability Webinar
Source:

VDMA e. V.
Textile Machinery

Anja Merker Bild phototek
Anja Merker
01.03.2023

Neues Mittelstand-Digital Zentrum Smarte Kreisläufe zum 01. März gestartet

  • Mittelstand 4.0-Kompetenzzentrum Textil vernetzt planmäßig beendet
  • Neues Mittelstand-Zentrum soll Unternehmen mit konkreten Ideen bei Digitalisierung und Nachhaltigkeit unterstützen

Das Mittelstand-Digital Zentrum Smarte Kreisläufe gehört zu Mittelstand-Digital. Mit dem Mittelstand-Digital Netzwerk unterstützt das Bundesministerium für Wirtschaft und Klimaschutz die Digitalisierung in kleinen und mittleren Unternehmen und dem Handwerk.

Das Netzwerk bietet mit den Mittelstand-Digital Zentren, der Initiative IT-Sicherheit in der Wirtschaft und Digital Jetzt umfassende Unterstützung bei der Digitalisierung. Kleine und mittlere Unternehmen profitieren von konkreten Praxisbeispielen und passgenauen, anbieterneutralen Angeboten zur Qualifikation und IT-Sicherheit. Das Bundesministerium für Wirtschaft und Klimaschutz ermöglicht die kostenfreie Nutzung und stellt finanzielle Zuschüsse bereit. Weitere Informationen finden Sie unter www.mittelstand-digital.de.

  • Mittelstand 4.0-Kompetenzzentrum Textil vernetzt planmäßig beendet
  • Neues Mittelstand-Zentrum soll Unternehmen mit konkreten Ideen bei Digitalisierung und Nachhaltigkeit unterstützen

Das Mittelstand-Digital Zentrum Smarte Kreisläufe gehört zu Mittelstand-Digital. Mit dem Mittelstand-Digital Netzwerk unterstützt das Bundesministerium für Wirtschaft und Klimaschutz die Digitalisierung in kleinen und mittleren Unternehmen und dem Handwerk.

Das Netzwerk bietet mit den Mittelstand-Digital Zentren, der Initiative IT-Sicherheit in der Wirtschaft und Digital Jetzt umfassende Unterstützung bei der Digitalisierung. Kleine und mittlere Unternehmen profitieren von konkreten Praxisbeispielen und passgenauen, anbieterneutralen Angeboten zur Qualifikation und IT-Sicherheit. Das Bundesministerium für Wirtschaft und Klimaschutz ermöglicht die kostenfreie Nutzung und stellt finanzielle Zuschüsse bereit. Weitere Informationen finden Sie unter www.mittelstand-digital.de.

Unter der Federführung des Gesamtverbandes textil+mode werden gemeinsam mit den Partnern Deutsche Institute für Textil- und Faserforschung Denkendorf (DITF), Institut für Textiltechnik der RWTH Aachen University (ITA), Sächsisches Textilforschungsinstitut (STFI) und DER MITTELSTANDSVERBUND – ZGV kleine und mittlere Unternehmen bei der Einführung zukunftsrelevanter digitaler Technologien begleitet. Themen sind u.a. hohe Energie- und Rohstoffkosten, neue gesetzliche Regelungen in den Bereichen Lieferketten und Kreislaufwirtschaft, Arbeiten auf digitalen Plattformen und eine bedarfsgerechte Qualifikation der Belegschaft

Geschäftsführerin Anja Merker sieht das Thema Digitalisierung in den Unternehmen angekommen. „Künstliche Intelligenz, Robotik oder Blockchain sind keine Fremdwörter mehr. Eingeschränkte Ressourcen und fehlendes Personal, das in diesem Bereich entsprechend ausgebildet ist, verzögern aber gerade in kleinen und mittleren Betrieben die konkrete Anwendung. Hier wollen wir Unternehmen in Zukunft unterstützen, betriebsinterne Abläufe effizienter zu gestalten und die Unternehmen fit für Digitalisierung und Nachhaltigkeit zu machen.“

Gemeinsam mit unseren Konsortialpartnern und den Partnern im Mittelstand-Digital Netzwerk werde man zusammen mit den Unternehmen passende Lösungen für nachhaltige, kreislauffähige Prozesse und neue digitale Geschäftsmodelle entwickeln, damit die aktuellen Herausforderungen gemeistert werden können. Dazu gehörten Machbarkeitsstudien zu potenziellen Lösungssystemen ebenso wie Prototypen für konkrete Anwendungsmöglichkeiten neuer Technologien oder Qualifizierungsangebote für Mitarbeiterinnen und Mitarbeiter.

Geplant ist darüber hinaus ein standortübergreifender Demonstrator, der beispielhaft einen transparenten Nachweis entlang der Lieferkette von der Faser bis zum Endkunden ermöglicht sowie ein Quick-Check-Tool, mit dem Mittelständler dabei unterstützt werden sollen, ihre Risiken in der Lieferkette schnell einzuschätzen und einen ersten Überblick über ihren ökologischen Fußabdruck zu gewinnen.

Source:

Gesamtverband der deutschen Textil- und Modeindustrie e. V.

(c) Euratex
RegioGreenTex - Kickoff meeting
21.02.2023

New European initiative for SMEs: Transform textile waste into value

43 partners of the RegioGreenTex project met in Brussels to kick start a three-year project that should change the way we manage textile recycling.

Regions for Green Textiles – known as RegioGreenTex – is a quadruple-helix partnership initiative aiming at mapping and reducing the difficulties, which currently exist in the implementation of a circular economy model within the textile ecosystem across the EU.

RegioGreenTex will  support tangible solutions at SME level, where textile waste becomes a value. The project will contribute to maintain and develop jobs in the EU textile sector, reshoring the production in Europe and making the EU textile value chain more competitive and resilient. It will contribute to the EU Green Deal objectives of reducing carbon footprint, energy and water consumption.

More information:
Euratex SMEs textile waste EISMEA
Source:

Euratex