From the Sector

Reset
12 results
14.06.2022

Members of TMAS at Texprocess, Techtextil and Heimtextil in Frankfurt

ACG Nyström, a member of TMAS, the Swedish textile machinery association, will demonstrate the automated Talon 75 multi-ply cutter at the forthcoming Texprocess exhibition in Frankfurt, Germany, from June 21-24.

The Talon 75 is capable of cutting up to 7.5cm of compressed materials common to the sewn products and technical textiles industries. The machine is engineered to automatically pull stacked material plies from the spreading table to a modular, bristle-block conveyor bed for reciprocating knife cutting of patterns. Precise system operations with state-of-the-art motion control communications offer an industrial-strength solution.

Industry 4.0 ready
Eastman’s Talon multi-ply cutting systems are Industry 4.0 ready and equipped with the latest in condition based predictive maintenance technology. Their robust design utilises motors and amplifiers that automatically detect changes in critical components to notify operators well in advance of maintenance prompts. Also on display in Frankfurt will be Eastman’s ES-960, a material spreader capable of fast and easy spreading heights up to 20cm.

ACG Nyström, a member of TMAS, the Swedish textile machinery association, will demonstrate the automated Talon 75 multi-ply cutter at the forthcoming Texprocess exhibition in Frankfurt, Germany, from June 21-24.

The Talon 75 is capable of cutting up to 7.5cm of compressed materials common to the sewn products and technical textiles industries. The machine is engineered to automatically pull stacked material plies from the spreading table to a modular, bristle-block conveyor bed for reciprocating knife cutting of patterns. Precise system operations with state-of-the-art motion control communications offer an industrial-strength solution.

Industry 4.0 ready
Eastman’s Talon multi-ply cutting systems are Industry 4.0 ready and equipped with the latest in condition based predictive maintenance technology. Their robust design utilises motors and amplifiers that automatically detect changes in critical components to notify operators well in advance of maintenance prompts. Also on display in Frankfurt will be Eastman’s ES-960, a material spreader capable of fast and easy spreading heights up to 20cm.

Members of TMAS will be showcasing a range of solutions aligning with the growing trend for more localised and automated textile manufacturing at the forthcoming Texprocess, Techtextil and Heimtextil shows which are all taking place in Frankfurt from June 21-24.

Source:

TMAS / AWOL Media

17.02.2022

RINCO ULTRASONICS continues to grow - new foundation RINCO Morocco

Morocco has created an optimal basis for companies with the introduction of the duty-free zone. RINCO ULTRASONICS will take advantage of this opportunity and strengthen its own position in the Moroccan market by establishing RINCO Morocco. RINCO Morocco will act as a center for the African continent. The automotive industry as well as the textile industry are particularly well represented locally.

RINCO ULTRASONICS AG, headquartered in Romanshorn, Switzerland, has specialized in the development and manufacture of ultrasonic welding machines and ultrasonic cutting systems since its founding in 1976. RINCO products are used for reliable welding of plastic parts as well as for cutting food and synthetic textiles.

Morocco has created an optimal basis for companies with the introduction of the duty-free zone. RINCO ULTRASONICS will take advantage of this opportunity and strengthen its own position in the Moroccan market by establishing RINCO Morocco. RINCO Morocco will act as a center for the African continent. The automotive industry as well as the textile industry are particularly well represented locally.

RINCO ULTRASONICS AG, headquartered in Romanshorn, Switzerland, has specialized in the development and manufacture of ultrasonic welding machines and ultrasonic cutting systems since its founding in 1976. RINCO products are used for reliable welding of plastic parts as well as for cutting food and synthetic textiles.

Source:

Rinco Ultrasonics AG

(c) Zünd Systemtechnik AG
16.02.2022

Zünd: Award-winning software tools for automated cutting

Zünd has evolved into a complete solutions provider in cutting/finishing workflows and automation. The market leader in digital cutting systems offers customers tailor-made workflow solutions for every step of digital production. In recognition of the wide-ranging benefits and exceptional price-performance ratio of these software solutions, a jury of experts from the European Digital Press Association EDP awarded them the distinction of «Best in Class».

Zünd receives EDP awards for three of its software tools. The jury declares PrimeCenter the «Best Workflow Solution», while the Pick&Place Interface Option and the Visualizing Option are recognized as «Best in Robotics» and «Best Print Support Tool», respectively.

Zünd has evolved into a complete solutions provider in cutting/finishing workflows and automation. The market leader in digital cutting systems offers customers tailor-made workflow solutions for every step of digital production. In recognition of the wide-ranging benefits and exceptional price-performance ratio of these software solutions, a jury of experts from the European Digital Press Association EDP awarded them the distinction of «Best in Class».

Zünd receives EDP awards for three of its software tools. The jury declares PrimeCenter the «Best Workflow Solution», while the Pick&Place Interface Option and the Visualizing Option are recognized as «Best in Robotics» and «Best Print Support Tool», respectively.

Zünd is known worldwide for its advanced, high-performance digital cutting systems «made in Switzerland». For some time now, the Swiss manufacturer has also been making a name for itself with user-friendly automation software such as PrimeCenter for prepress, as well as the Visualizing Option and the Pick&Place Interface Option for digital production. The latter are two highly effective solutions for removing/unloading cut parts, offering visual support and robot integration, respectively. On account of its exceptional know-how and consulting expertise,

  • PrimeCenter automation software serves as control center for creating print & cut files and enables a highly efficient and productive prepress workflow. In a few clicks, users create fully nested print & cut jobs.
     
  • The Pick&Place Interface Option lets Zünd Cut Center – ZCC control a robotic device, enabling fully automated parts removal—picking, sorting, and placing at pre-defined locations.
     
  •  The Visualizing Option provides visual support for parts removal. Cut parts are labeled via projection or monitor. The user is able to see at a glance which parts belong to which job and can apply labels for continuous Track&Trace.

For more than ten years, EDP has been evaluating products and developments in the graphics industry for excellence and for commendation through an evaluation process involving the EDP technical committee, a jury of experts, and finally, a general award assembly of EDP members.

Source:

Zünd Systemtechnik AG

Zünd and Airborne Sign Distribution Agreement (c) Zünd Systemtechnik
Swiss cutting system manufacturer Zünd Systemtechnik and Dutch composite automation company Airborne have signed a distribution agreement.
26.01.2022

Zünd and Airborne Sign Distribution Agreement

Swiss cutting system manufacturer Zünd Systemtechnik and Dutch composite automation company Airborne have expanded their collaboration. As a result of a new distribution agreement, customers will be able to benefit from state-of-the-art digital production solutions for automated processing of composite materials. Zünd and Airborne will jointly promote these production solutions through their sales and servicing networks.

Both companies are technology leaders offering solutions for composites manufacturing and processing – Zünd develops and manufactures digital flatbed cutting systems capable of processing reinforced fiber materials such as CFRP or GRP. Airborne, based in Den Haag in the Netherlands, provides fully integrated automation solutions for efficient composites processing.
 
The goal of this partnership is to make it easier than ever for customers to access state-of-the-art digital cutting and automation solutions. In that endeavor, the competencies of both companies complement each other perfectly. Their combined expertise manifests itself especially in the areas of fully automated cutting, preforming, offloading and sorting.

Swiss cutting system manufacturer Zünd Systemtechnik and Dutch composite automation company Airborne have expanded their collaboration. As a result of a new distribution agreement, customers will be able to benefit from state-of-the-art digital production solutions for automated processing of composite materials. Zünd and Airborne will jointly promote these production solutions through their sales and servicing networks.

Both companies are technology leaders offering solutions for composites manufacturing and processing – Zünd develops and manufactures digital flatbed cutting systems capable of processing reinforced fiber materials such as CFRP or GRP. Airborne, based in Den Haag in the Netherlands, provides fully integrated automation solutions for efficient composites processing.
 
The goal of this partnership is to make it easier than ever for customers to access state-of-the-art digital cutting and automation solutions. In that endeavor, the competencies of both companies complement each other perfectly. Their combined expertise manifests itself especially in the areas of fully automated cutting, preforming, offloading and sorting.

Airborne’s automated kitting solutions reduce operating costs by maximizing material yield through optimized nesting. At the same time, they resolve the challenges inherent in sorting and grouping cut parts from complex nested layouts into laminate-ready kits with minimal operator intervention. Airborne offer a portfolio of solutions tailored to meet the individual needs of customers from affordable entry-level semi-automated products through to fully integrated and high productivity systems. All systems are "plug and play" and require no additional special programming. Airborne’s software generates the required robotics code directly from information derived from the nesting data and permits static or dynamic nesting and a sorting solution that adapts “on the fly”.

Zünd has been designing, manufacturing, and marketing digital cutting systems for more than 30 years. Zünd high-performance modular cutters are now in use all over the world. The Swiss family-owned company now in its second generation has established a global network of Zünd sales and service organizations under the leadership of Oliver Zünd. “This is a situation where two strong partners complement each other in much the same way as in strong partnerships we have established in other industries. It is a continuation of a long-standing company strategy. Airborne has excellent know-how in developing and manufacturing automated solutions for processing composites. Together we can offer our customers state-of-the-art technology and provide a technological answer to the growing demand for high-performance, innovative production systems in the composites market."

Joe Summers, Commercial Director for Airborne agrees: "Our partnership with Zünd brings a great deal of added value to our customers. Zünd shares our goal of creating greater cutting-room productivity. The Zünd cutter is key to converting materials with the greatest possible efficiency and maximum material usage."

Source:

Zünd Systemtechnik AG

(c) Kornit Digital / Brodelec
14.12.2021

Brodelec complements printing systems with Kornit Atlas MAX technology

Kornit Digital Ltd. announced that France-based Brodelec has recently complemented its existing Kornit Avalanche direct-to-garment (DTG) and Kornit Presto S direct-to-fabric print systems with Kornit Atlas MAX technology. The print services provider, which produces personalized markings on textiles, luggage, and promotional pieces, has used Kornit Digital production technologies for more than 15 years.

Tourism accounts for 30% of Brodelec’s business, and clients include zoos, museums, and tourist attractions, as well as communication agencies. They established an on-demand web platform enabling small brands and YouTube users to order and receive custom gear quickly. By investing in a broad cross-section of Kornit’s technologies for single-step, eco-friendly, just-in-time production, Brodelec creates new opportunities and sales channels, which proved fortuitous when the pandemic economy suddenly impacted consumer behaviors.

Kornit Digital Ltd. announced that France-based Brodelec has recently complemented its existing Kornit Avalanche direct-to-garment (DTG) and Kornit Presto S direct-to-fabric print systems with Kornit Atlas MAX technology. The print services provider, which produces personalized markings on textiles, luggage, and promotional pieces, has used Kornit Digital production technologies for more than 15 years.

Tourism accounts for 30% of Brodelec’s business, and clients include zoos, museums, and tourist attractions, as well as communication agencies. They established an on-demand web platform enabling small brands and YouTube users to order and receive custom gear quickly. By investing in a broad cross-section of Kornit’s technologies for single-step, eco-friendly, just-in-time production, Brodelec creates new opportunities and sales channels, which proved fortuitous when the pandemic economy suddenly impacted consumer behaviors.

Using Kornit’s Oeko-Passport and GOTS-certified inks, these systems produce consistent, high-quality impressions within minutes, giving Brodelec the flexibility to produce a variety of applications, in multiple materials, with a single ink set. The business complemented Kornit’s quick, efficient production capabilities with a laser cutting system and several sewing machines, empowering them to offer finished pieces such as imprinted cushions, tote bags, aprons, and towels.

Source:

Kornit Digital / pr4u

Zünd: Automatic production monitoring for cutting with Zünd Connect (c) Zünd Systemtechnik AG
02.09.2021

Zünd: Automatic production monitoring for cutting with Zünd Connect

Zünd Connect compiles production data from integrated Zünd cutting systems into meaningful key performance indicators, such as cutter capacity, availability, and overall equipment effectiveness. Zünd Connect creates transparency and identifies areas in the digital cutting workflow with potential for optimization.

There are many ways to optimize digital cutting and ensure maximum productivity, which is the reason why Zünd now offers Zünd Connect, a monitoring tool that helps the user recognize this potential and increase productivity. Using Zünd Connect, the user can see at a glance when and, more importantly, why machine interruptions occur, how much time is spent in setup, and what the availability of each machine is.

Zünd Connect compiles production data from integrated Zünd cutting systems into meaningful key performance indicators, such as cutter capacity, availability, and overall equipment effectiveness. Zünd Connect creates transparency and identifies areas in the digital cutting workflow with potential for optimization.

There are many ways to optimize digital cutting and ensure maximum productivity, which is the reason why Zünd now offers Zünd Connect, a monitoring tool that helps the user recognize this potential and increase productivity. Using Zünd Connect, the user can see at a glance when and, more importantly, why machine interruptions occur, how much time is spent in setup, and what the availability of each machine is.

The web-based monitoring tool gives the user access to cutter- performance data at a glance, any time of day. Reliable key performance indicators are available at all times to help users maximize productivity. The system records productivity levels over a freely definable period using Zünd Cut Center – ZCC (Version 3.4 or later) as data source. Data monitoring provides information users need in order to make informed decisions. This comprehensive overview of production data reveals connections that are often overlooked. Zünd Connect supplies valuable key performance indicators for assessing how efficiently cutting systems are working. To be able to improve cutter efficiency, potential areas of improvement must be uncovered and recognized. This potential lies primarily in the technology but also in the way it is being used.

Zünd Connect is available in a "Monitor" or an "Analyzer" version.

Source:

Zünd Systemtechnik AG 

Arjen Evertse (c) Mimaki. Arjen Evertse.
28.06.2021

Mimaki: Arjen Evertse Promoted to General Manager Sales, EMEA

Mimaki, a leading manufacturer of inkjet printers and cutting systems, has announced that Arjen Evertse has been appointed as General Manager Sales, EMEA, effective 1st September 2021. After founding a business to support the adoption of Mimaki technology in Eurasia, this increased responsibility and exciting new challenge is the latest step forward in Evertse’s successful 12-year long Mimaki career.

Evertse has held a variety of roles at Mimaki, including technical operator and senior management, but most recently, he has overseen Mimaki Eurasia, a Mimaki subsidiary. He will succeed Ronald van den Broek, who has accepted a partner position at valued Mimaki customer and 3D print specialist, Marketiger.

Mimaki, a leading manufacturer of inkjet printers and cutting systems, has announced that Arjen Evertse has been appointed as General Manager Sales, EMEA, effective 1st September 2021. After founding a business to support the adoption of Mimaki technology in Eurasia, this increased responsibility and exciting new challenge is the latest step forward in Evertse’s successful 12-year long Mimaki career.

Evertse has held a variety of roles at Mimaki, including technical operator and senior management, but most recently, he has overseen Mimaki Eurasia, a Mimaki subsidiary. He will succeed Ronald van den Broek, who has accepted a partner position at valued Mimaki customer and 3D print specialist, Marketiger.

More information:
Mimaki Mimaki Europe Arjen Evertse
Source:

Mimaki

Mimaki appoints Mark Sollman as Product Manager EMEA (c) Mimaki Europe BV
Mark Sollman, Product Manager EMEA
21.05.2021

Mimaki appoints Mark Sollman as Product Manager EMEA

Mimaki, a manufacturer of inkjet printers and cutting systems, has today announced that long-standing employee, Mark Sollman, will be appointed to the role of Product Manager, EMEA on the 1st July 2021. Sollman has been with Mimaki for over 15 years and as such, his extensive knowledge of the business and its diverse product portfolio makes him the clear choice for this esteemed management position.

Sollman will be succeeding Bert Benckhuysen. After four years with Mimaki, Benckhuysen has decided to take on a new challenge as Business Development Director at Colourama. A valued Mimaki customer, Colourama is a company Benckhuysen knows well, having also previously been employed as Production Manager at this thriving Polish textile printer.

Mimaki, a manufacturer of inkjet printers and cutting systems, has today announced that long-standing employee, Mark Sollman, will be appointed to the role of Product Manager, EMEA on the 1st July 2021. Sollman has been with Mimaki for over 15 years and as such, his extensive knowledge of the business and its diverse product portfolio makes him the clear choice for this esteemed management position.

Sollman will be succeeding Bert Benckhuysen. After four years with Mimaki, Benckhuysen has decided to take on a new challenge as Business Development Director at Colourama. A valued Mimaki customer, Colourama is a company Benckhuysen knows well, having also previously been employed as Production Manager at this thriving Polish textile printer.

Source:

Mimaki Europe B.V / Bespoke

Moti Fabrics (Pvt) Ltd. Moves to Digital Production with Mimaki Tiger (c) Mimaki
The Tiger-1800B MkII, Mimaki’s flagship industrial volume textile printer
22.10.2020

Moti Fabrics (Pvt) Ltd. Moves to Digital Production with Mimaki Tiger

  •   Mimaki Tiger-1800B MkII Printers for Faster, High-Quality Textile Printing

Amsterdam - Mimaki Europe, a leading manufacturer of inkjet printers and cutting systems, announces today that Pakistani textile company, Moti Fabrics (Pvt) Ltd., is leveraging multiple Mimaki Tiger industrial textile printing units to take its business to the next level. As a result of on the outstanding performance and process optimisation delivered by the Mimaki digital printing equipment, the company has been able to adapt to changes in the textile industry and is now projected to reinforce its market position and expand its capabilities in high-quality textile production.

  •   Mimaki Tiger-1800B MkII Printers for Faster, High-Quality Textile Printing

Amsterdam - Mimaki Europe, a leading manufacturer of inkjet printers and cutting systems, announces today that Pakistani textile company, Moti Fabrics (Pvt) Ltd., is leveraging multiple Mimaki Tiger industrial textile printing units to take its business to the next level. As a result of on the outstanding performance and process optimisation delivered by the Mimaki digital printing equipment, the company has been able to adapt to changes in the textile industry and is now projected to reinforce its market position and expand its capabilities in high-quality textile production.

Headquartered in Faisalabad, Punjab province – the second largest textile hub in Pakistan –, Moti Fabrics (Pvt) Ltd. mainly serves the high fashion industry and uses its cutting-edge technology to print about 100,000 metres daily. Faced with recent challenges in the global textile market, management at Moti Fabrics (Pvt) Ltd. embarked on innovating the company’s business model, shifting from conventional to digital printing. In doing so, the company invested in Mimaki’s advanced industrial textile technology and installed three Mimaki Tiger-1800B MkII units. “We were – and still are – experiencing a massive transformation in the printing segment, with brands demanding high quality products delivered within short deadlines. This change in our customers’ requirements urged us to move to digital printing,” says Muhammad Asif, CEO at Moti Fabrics (Pvt) Ltd. “Our choice has already proved sound as our brand-new Tiger-1800B MkII printing systems have enabled us to cope with the high standards of the fashion industry in terms of both quality and delivery times. In addition, we have been able to gradually enhance our production processes in a cost-effective way.”

The Tiger-1800B MkII is Mimaki’s flagship industrial volume textile printer, available either in dye sublimation configuration for transfer printing or with reactive ink for direct-to-textile printing. Of the three Mimaki Tiger-1800B MkII solutions operating at Moti Fabrics (Pvt) Ltd., two are equipped with reactive inks, enabling the company to directly print onto natural fibres such as cotton and linen, as well as onto manufactured cellulose fibres, including rayon and nylon. The third Mimaki Tiger-1800B MkII features sublimation inks serves the ever-growing printed polyester market, allowing the company to strategically diversify its product portfolio.

“There are several features of the Tiger-1800B MkII that benefit our production and our business at large. The MAPS (Mimaki Advanced Pass System), just to name one, prevents banding and colour-shifting to deliver a higher standard of quality, while the NRS (Nozzle Recovery System) provides uninterrupted production, minimising downtime and ensuring superior results. The sticky belt system together with the large-size ink tanks (with a capacity of 10kg) and the high-performance software RIP TxLink3 are some of the other features that make these printers efficient, user-friendly and reliable,” says Asif.

Asif concludes, “Looking at the future, our aim is to set up a print department featuring only Mimaki’s technologies. We are already considering the next steps to make this possible, knowing that we can count on the support of Signtrade, Mimaki’s dealer in the region and our trustworthy partner.”

Moti Fabrics (Pvt) Ltd. was founded in 1992 by Muhammad Asif’s father Haji Muhammad Yousaf and his partner Haji Rasheed Ahmad. Established as a dyeing company, Moti Fabrics (Pvt) Ltd. was able to gradually diversify the business over the years to become an advanced textile printing specialist. Today, the company is an established provider to the high fashion industry in Pakistan and on an international level.

“The story of Moti Fabrics is incredibly inspiring. Belonging to a region with such rooted textile printing heritage, the company has been able to embrace a new, challenging business model in order to stay at pace with the changing demand from the textile industry and has succeeded,” comments Ronald van den Broek, General Sales Manager at Mimaki Europe. “Customers like Moti Fabrics make us proud as they demonstrate how our advanced Mimaki Tiger industrial textile series can be the enabling technology for those textile companies planning the shift from conventional to digital printing.”

17.06.2020

Virtual event series by Mimaki

  • Live Event Series Launched to Connect with Customers and Drive New Opportunities After COVID-19

Mimaki Europe, a leading manufacturer of inkjet printers and cutting systems, has announced it will host a three-part virtual event series – Mimaki Live Series – to support customers looking for inspiration and advice on how to maintain or revive business after the COVID-19 crisis.

Building on the success of Mimaki’s Virtual Print Festival in March and April this year, Mimaki has created an exciting and insightful three-day programme for three market-focused virtual events:

  • Event I – Sign Graphics – 30th June 2020
  • Event II – Textiles – 14th July 2020
  • Event III – Industrial Printing - 27th August 2020

Each event will provide a platform for Mimaki representatives, customers, and suppliers to discuss the impact the COVID-19 crisis has had on their business and the wider industry, as well as share their experiences, challenges, and success stories.

  • Live Event Series Launched to Connect with Customers and Drive New Opportunities After COVID-19

Mimaki Europe, a leading manufacturer of inkjet printers and cutting systems, has announced it will host a three-part virtual event series – Mimaki Live Series – to support customers looking for inspiration and advice on how to maintain or revive business after the COVID-19 crisis.

Building on the success of Mimaki’s Virtual Print Festival in March and April this year, Mimaki has created an exciting and insightful three-day programme for three market-focused virtual events:

  • Event I – Sign Graphics – 30th June 2020
  • Event II – Textiles – 14th July 2020
  • Event III – Industrial Printing - 27th August 2020

Each event will provide a platform for Mimaki representatives, customers, and suppliers to discuss the impact the COVID-19 crisis has had on their business and the wider industry, as well as share their experiences, challenges, and success stories.

The Mimaki Live events will feature a host of engaging panel discussions, opinion polls, live chats and Q&As, all designed to prompt important, topical discussions and share information and advice across the print community.  

To register for the Mimaki Live event series, please visit www.mimakieurope.com/mimaki-live-event.

More information:
Mimaki
Source:

Mimaki

Mimaki 3DGD-1800 3D printer (c) Mimaki
Mimaki 3DGD-1800 3D printer
24.03.2020

Mimaki Expands Portfolio with Large-Scale 3D Printer

New Mimaki 3DGD-1800 3D printer boasts ground-breaking production speeds and transforms production of large-sized objects, opening up a wide range of new possible applications across industries from sign and display to manufacturing.

Mimaki Europe, a leading manufacturer of inkjet printers and cutting systems, today announces the launch of the new Mimaki 3DGD-1800 3D printer, facilitating large-scale production up to three times faster than with conventional Fused Filament Fabrication (FFF) type 3D printers.

New Mimaki 3DGD-1800 3D printer boasts ground-breaking production speeds and transforms production of large-sized objects, opening up a wide range of new possible applications across industries from sign and display to manufacturing.

Mimaki Europe, a leading manufacturer of inkjet printers and cutting systems, today announces the launch of the new Mimaki 3DGD-1800 3D printer, facilitating large-scale production up to three times faster than with conventional Fused Filament Fabrication (FFF) type 3D printers. The Mimaki 3DGD-1800 3D printer connects the company’s 2D printing expertise and 3D technology innovations, providing customers with a cost-effective, total solution for 3D sign and display applications.

Capable of producing objects up to 1.8 metres tall in just seven hours – with its assembly-based design allowing for the creation of even larger designs – the innovative 3D printing system boasts a number of clever time- and cost-saving features, including dual-head configuration to enable the simultaneous output of two structures. The Mimaki 3DGD-1800 also facilitates the production of support-free hollowed structures, further streamlining production whilst allowing for increased portability and the possible addition of interior illuminations. The technology will open up a diverse range of potential applications, from signage, events and creative art through to interior design. Customers can utilise Mimaki’s extensive portfolio of 2D print solutions to cost-effectively decorate these applications, opening doors to a range of new products that combine creativity and innovation with Mimaki’s tried and tested vibrant, high-quality results.

Commercially available from April 1, 2020, the new Mimaki 3DGD-1800 is set to revolutionise the way in which large-sized objects are created, enabling a switch from costly and time-consuming conventional handcrafting methods which require significant expertise, to effortless, high-speed production utilising 3D data. 

More information:
Mimaki
Source:

Mimaki

Lectra and Faurecia renew their partnership agreement ©lectra
Faurecia Cadillac
26.09.2017

Lectra and Faurecia renew their partnership agreement

  • Lectra contributes to Faurecia Seating Business Group Industry 4.0 readiness and “digital enterprise” transformation initiative

Paris, September 26, 2017 – Lectra, the world leader in integrated technology solutions dedicated to industries using fabrics, leather, technical textiles and composite materials, is pleased to announce the renewal of its partnership with Faurecia through the signing of a global agreement for its Seating Business Group.

The cutting process for the production of seat covers, headrests and interiors is an increasingly strategic part of Faurecia’s Seating activity. Faurecia Seating supplies vehicle complete seats, frames, mechanisms and trim covers to major carmakers worldwide, whose manufacturing processes are gradually evolving toward Industry 4.0.

Faurecia Seating aims to double the production of its existing manufacturing facilities by reinforcing operations with advanced manufacturing technologies. The company’s extended partnership with Lectra entails focusing on operational excellence initiatives across its automotive seating division.

  • Lectra contributes to Faurecia Seating Business Group Industry 4.0 readiness and “digital enterprise” transformation initiative

Paris, September 26, 2017 – Lectra, the world leader in integrated technology solutions dedicated to industries using fabrics, leather, technical textiles and composite materials, is pleased to announce the renewal of its partnership with Faurecia through the signing of a global agreement for its Seating Business Group.

The cutting process for the production of seat covers, headrests and interiors is an increasingly strategic part of Faurecia’s Seating activity. Faurecia Seating supplies vehicle complete seats, frames, mechanisms and trim covers to major carmakers worldwide, whose manufacturing processes are gradually evolving toward Industry 4.0.

Faurecia Seating aims to double the production of its existing manufacturing facilities by reinforcing operations with advanced manufacturing technologies. The company’s extended partnership with Lectra entails focusing on operational excellence initiatives across its automotive seating division.

Standardization of the Vector® fabric-cutting solution—endowed with preventive and predictive maintenance capabilities and the highest-performance cutting system available on the market to date—will be instrumental to the implementation of these initiatives throughout the division’s fabric cutting facilities. Faurecia currently has more than 60 Vector fabric cutting solutions in production worldwide.

“More than ever, we face major challenges in terms of flexibility, agility and productivity—producing more while reducing costs,” observes Hagen Wiesner, Executive Vice President, Faurecia Seating. “Our cutting processes have become strategic in reaching these goals. Faurecia’s ‘digital enterprise’ project aims to achieve operational excellence in virtually every aspect of our organization. Together with Lectra, we will make this a reality in the cutting room, with smart automation and predictive maintenance”.

“Given the profound transformations gripping manufacturing, helping our customers ready their operations for the Fourth Industrial Revolution has become without question our core mission,” remarks Daniel Harari, Lectra Chairman and CEO. “Faurecia is among the automotive suppliers at the forefront of this movement. Digital technologies and industry expertise are the business enablers that will allow manufacturers to connect inside and outside the value chain in the near future.”

Source:

Lectra Headquarters / Press Department