From the Sector

The Oerlikon Barmag Huitong Engineering joint venture, part of the Oerlikon Manmade Fibers segment, recently commissioned a polycondensation system which feeds a polyester industrial yarn system. The future operator will be industrial yarn manufacturer Jiangsu Solead New Material Group Co. Ltd., which is placing its trust in the Oerlikon Manmade Fibers ‘From Melt to Yarn’ total solution philosophy.

This successfully concludes the first phase of this major project. Oerlikon Barmag Huitong Engineering installed the polycondensation system, which has a capacity of 600 tons a day, at Jiangsu Solead New Material Group Co. Ltd. in the Chinese Jiangsu Province. This will be connected to an Oerlikon Barmag industrial yarn spinning system with a 350-ton-a-day capacity. The new systems will be deployed to produce predominantly high-tenacity (HT) yarns for use in agricultural, infrastructure, transport, security and outdoor applications. These systems can be used to manufacture yarns with up to 3 x 6,600 dtex of high yarn quality with simultaneously high production efficiency. Furthermore, low-shrinkage yarns for coating textiles and so-called LDI yarns (high-tenacity, low-denier industrial yarns) for industrial sewing yarns, among other things, are also manufactured.

• Digital processes also speed up the manufacture of meltblown systems

in order to further optimize the material provision for the Oerlikon Neumag and Oerlikon Nonwoven business units and to strengthen internal processes at the German site in Neumünster, the Manmade Fibers segment of the Swiss Oerlikon Group decided last year to invest in a state-of-the-art logistics center with a new lift center. It has already been fully operational for a few weeks. This is tremendously helpful for speeding up the processing of the numerous orders for meltblown systems for manufacturing high-quality nonwovens for protective masks and apparel that Oerlikon Nonwoven has received over the past months alone

Investing in a new Oerlikon Neumag and Oerlikon Nonwoven logistics center is paying dividends: the processing speed when manufacturing new systems – very much to the benefit of customers – considerably improved in the first week after the center started operating, not least as a result of the optimized processes and the material handling. After 25 years, the time had finally come to break new ground and to better equip ourselves for the future requirements of the markets. The paternoster storage facility to date not only needed to have regular repairs carried out due to its age, it was also too small for the projects increasingly being carried out today. The only 90 m² were capable of storing around 12,000 parts. In contrast, the new logistics center now offers more than 250 m² of storage space for in excess of 25,000 parts. As a result, this now also houses all small parts, which used to be stored in the high-rack facility due to lack of space.

New hardware, new software
Coinciding with the opening of the new logistics center, Oerlikon also introduced new digital processes that will also help cope with the increasing production volumes. To this end, consistently maintained master data and photos for all parts ensure safe, paper-free storage and handling of the material from now on. In order to minimize mistakes, a laser pointer now indicates from which or to which space the goods are moved. Furthermore, a photo of the material, sorted to type, is displayed on the screen. The digitalization of the warehousing facilities secures the pick and put-away process so that checking material numbers becomes superfluous when removing items from the warehouse.

Protective masks for Europe
With FleeceforEurope and Lindenpartner, Düsseldorf-based Kloepfel Group purchasing consultancy and Berlin-based industrial consultancy Bechinger & Heymann Holding plan to manufacture and distribute up to 50 million protection class FFP1 through FFP3 respiratory masks a month exclusively for the European market from the beginning of fall. And the primary focus will be on quality.
With protective masks – including those used in operating rooms – this quality is provided above all by  virus-absorbing nonwovens. And these will be manufactured by ‘FleeceforEurope’ using an Oerlikon Nonwoven meltblown system.
But masks effectively protecting against infections can only be guaranteed with the right quality. A crucial factor in this is the inside of the mask. Because the nonwoven used in protection class FFP1 through FFP3 respiratory masks plays a decisive role.
Here, the meltblown technology from Oerlikon Nonwoven will be deployed. In a special, patented process, the fibers laid into a nonwoven fabric during manufacture are subsequently electrostatically-charged, before the material is further processed downstream.

European market for protective masks with a promising future
Those responsible at Oerlikon Nonwoven and FleeceforEurope, which will primarily focus on producing high-end nonwovens, and Lindenpartner, which will manufacture and distribute the protective masks, are certain of one thing: the market for protective masks has a very promising long-term future in Europe.
What has been commonplace in Asia for many years now will also become normal in Europe. People will be increasingly wearing face masks when venturing out, in order to better protect themselves against health risks such as the current pandemic and also against increasing environmental pollution in the form of  fine particles and exhaust fumes in the future. A

Medical face masks from a vending machine
Mask producer Lindenpartner has already secured supplies of nonwovens and will be producing face masks for the European healthcare sector over the coming weeks. To fight the coronavirus pandemic, Lindenpartner is planning to install 100 self-service face mask vending machines in Germany over the next four weeks, positioning them in publicly-accessible places such as shopping centers and airports, for example.

Materials for in excess of one million protective masks
Within the context of supporting the critical infrastructure in Germany, Oerlikon Nonwoven immediately began converting its laboratory systems in Neumünster to manufacture nonwovens at the end of March. With this, only small local businesses and companies were initially supported in the manufacture of oronasal masks.
With the laboratory system at the R&D Center material for more than one million protective masks a month can be manufactured.

The laboratory has meanwhile run out of raw materials and new orders for replacement materials had to be placed before Easter – with current delivery times of approx. 3 weeks. This will allow production to be resumed, and even considerably expanded, in May.
The laboratory system is now once again being deployed to produce nonwovens that will be used to make more than million face masks / oronasal masks a month. “We will not be manufacturing the masks ourselves. We have meanwhile found both corresponding partner companies and also private individuals demanding nonwovens”, adds Andreas Frisch, commenting on the developments.

Boom in orders
Furthermore, Oerlikon Nonwoven has also fired up the production of the machines and systems used for its meltblown technology. The demand from Germany, Europe and the rest of the world has quickly
secured the company a high in orders..
We will be commissioning the first meltblown system at the site of a leading Western European nonwovens producers in the second quarter of 2020. The capacities for respiratory masks available in Europe to date are predominantly manufactured on Oerlikon
Nonwoven systems.

Within the context of a globally-networked textile industry, online services have become essential for maintenance, modernization and original parts procurement processes for machines and systems.
Here, the Oerlikon Manmade Fibers segment optimized the myOerlikon.com service portal for the products and services of its Oerlikon Barmag, Oerlikon Neumag and Oerlikon Nonwoven brands, making it more userfriendly. It allows customers to now access tailored services in nine different languages and around the clock.

Each and every machine park usually has numerous associated documents, ranging from manuals, circuit diagrams and 3D drawing-supported original parts catalogs, all the way through to operating instructions and final documents. myOerlikon.com bundles this information, while also providing users with additional communications on potential machine modernizations and upgrades and on special offers tailored to the respective production system.

Real security during virtual shopping
At the same time, users can access the myOerlikon.com e-commerce platform, which operates in parallel.
Customers can not only place orders here, they can also send online inquiries to Oerlikon, view prices and warehouse stocks and track inquiries,
quotations and orders already made or placed, among many other things. As a result of online access to original parts catalogs for the respective customer machines and systems, erroneous orders can be avoided.
Log-in is secure for users, as are all transactions carried out using the platform. With this, Oerlikon is implementing real security for all virtual purchases. All data exchanged is fundamentally
encrypted and hence protected against unauthorized access.

a leading Asian large-scale manufacturer of manmade fibers and polymers has invested in a new Oerlikon Nonwoven meltblown system. The recently-signed contract comprises a 2-beam system for manufacturing filtration nonwovens – predominantly for medical products such as face masks – with a nominal capacity of up to 1,200 tons of nonwovens a year. The commercial production launch has been scheduled for the fourth quarter of 2020.

The 2-beam system has an operating width of 1.6 meters and is equipped with the new patented Oerlikon Nonwoven electro-charging unit. The Oerlikon Nonwoven meltblown technology is recognized by the market as being the technically most efficient method for producing highly-separating filter media made from manmade fibers, particularly in conjunction with electrostatic charging and with extremely low-pressure loss. Electro-charging the filter nonwovens allows the manufacture of sophisticated EPA- and HEPA-class filter media as well as media that comply with the requirements of N95-, FFP2- and FFP3-class respiratory masks.

The demand for filtration nonwovens for medical applications has risen tremendously across the globe since the outbreak of the Sars-CoV-2 (coronavirus) epidemic, presenting all manufacturers with huge challenges. A meltblown system will be commissioning at the site of a leading Western European nonwovens producers as early as the second quarter of 2020. This system will be deployed exclusively in the manufacture of nonwovens for respiratory masks.

Due to the current state of emergency with regards to the local supply of face masks, Oerlikon Nonwoven is currently using its own laboratory system to produce electrostatically-charged filter media which are being sent to local small businesses and companies for the manufacture of face masks. 

Major technological changes to Oerlikon Neumag’s RoTac³ tangling unit produce even more efficient BCF yarn tangling. On the one hand, the tangling nozzle has been flow - optimized, allowing the air pressure to be lowered by approximately 10 percent compared to its predecessor while maintaining the same knot strength. Furthermore, the nozzle bearing arrangements have been improved. Consequently, either higher speeds or nozzle rings with greater numbers of holes can be used, generating more knots in the yarn.

Even at high production speeds, tangling knots can be set considerably more evenly with the RoTac³ than in the case of other conventional tangling units. Frequent tangling dropouts are now a thing of the past. This ensures better yarn quality and has a positive impact on further processing. The result: the carpet has a visibly more even appearance.

Stable and efficient yarn production is hugely important to yarn manufacturers. Not only does the evenness of the tangling knots make the investment interesting, so too does the energy efficiency of the RoTac³. The tangling unit requires up to 50 percent less energy for generating compressed air. Against the background of rising energy prices, this represents an excellent prerequisite for optimizing production costs.

Oerlikon Neumag has been able to secure various retrofit contracts since the launch of the RoTac³ in 2015. And new systems are predominantly equipped with RoTac³. The RoTac³ is included in the standard scope of delivery for the newer BCF S8 system. The tangling unit is available as an option both for the single-end Sytec One system and the three - end S+ and it can also be retrofitted on request.

The Indian yarn manufacturer Polygenta, specialized on the manufacturing of sustainable recycling yarns, recently commenced production of recycled polyester FDY yarns at its facilities in Nashik. The yarn is produced using a combination of perPETual Global Technologies patented chemical recycling technology and Oerlikon Barmag’s direct spinning system equipped with the 32-end WINGS concept.

The spinning plant was commissioned by Oerlikon Textile India technologists in close collaboration with the process experts at Oerlikon Barmag, with various FDY products currently being developed. The yarn produced caters to the requirements of premium-segment clients demanding high quality, cost effective sustainable solutions.

As one of the world’s first companies, Polygenta has, since 2014, been producing 100% recycled POY and DTY from post-consumer PET using the patented chemical recycling process developed by perPETual Global Technologies. perPETual’s process reduces CO2 impact by more than 66% compared to virgin PET. The yarn is spun using Oerlikon Barmag systems and equipment. As a result, Polygenta is able to produce a wide range of DTY and FDY yarns that comply with the Global Recycled Standard (GRS).

For the sixth time now, Oerlikon Nonwoven will be showcasing market- and customer-oriented solutions for hygiene, medical, filtration and other technical applications at the globally-leading nonwovens trade fair INDEX in Geneva, Switzerland. Between March 31 and April 3, 2020, visitors to the trade fair can convince themselves of the Neumünsterbased systems constructor’s extensive product and process know-how.

Comprehensive spunbond portfolio – always the right solution
Oerlikon Nonwoven meanwhile has a very broad range of spunbond technology products and services. The process for manufacturing geotextiles from polyester or polypropylene has been optimized; it is characterized by high production capacities and yields, with simultaneously low energy consumption for producing benchmark nonwoven products.

For the manufacture of hygiene nonwovens, Oerlikon Nonwoven offers its new QSR (Quality Sized Right) systems. Here, the benefits of the Chinese machine construction partner’s nonwoven formation are integrated into the complete solution. The advantage for nonwovens producers: highly competitive solutions at attractive prices with comparably low investment.

Cost-efficiently manufacturing meltblown nonwovens
New, unique and highly sophisticated filter media can be easily and efficiently manufactured thanks to Oerlikon Nonwoven’s optimized meltblown technology. Whether as a stand-alone system with one or several positions, as ‘plug & produce’ installations for already existing systems or in conjunction with other technologies: the Oerlikon Nonwoven meltblown process already enables the cost-efficient manufacture of meltblown nonwovens with the quality requirements of tomorrow. Ever more producers are choosing the meanwhile extensively tried-and-tested and consistently further-developed Oerlikon Nonwoven meltblown solutions.

Airlaid technology for the nonwovens of tomorrow
Pulp or cellulose fibers as raw material for manufacturing nonwovens are currently virtually unrivaled with regards to sustainability and environmental compatibility. The Oerlikon Nonwoven airlaid process is the ideal solution for processing this raw material into high-end products for a wide range of applications. Today, there is huge demand for manufacturing solutions for high-quality, lightweight airlaid nonwovens with economically attractive production speeds and system throughputs. In this area, the patented Oerlikon Nonwoven formation process – which also permits the homogeneous mixing of the most diverse raw materials, while simultaneously guaranteeing superb evenness and homogeneous fiber laying – is setting standards even for nonwovens with low running meter weights. And the benefits of this technology are also increasingly gaining significance in sustainable recycling applications.

P&G patented PHANTOM technology from Teknoweb Materials
Also being showcased at the trade fair stand is the P&G patented PHANTOM technology from Teknoweb Materials, Oerlikon Nonwoven’s strategic partner for hygiene products and wipes. The PHANTOM technology is released to Teknoweb Materials by P&G in worldwide exclusive license. The PHANTOM technology is the superior dry laid alternative technology for manufacturing wet wipes from pulp and polymer fibers, for example. Compared to conventional, known processes, this technology offers superior performances with cost advantage in much more eco-friendly products. Dispensing with hydroentanglement renders subsequent drying of the material redundant. Targeted process management allows the optimal setting of the relevant product parameters such as softness, tenacity, dirt absorption and liquid absorption.

The Oerlikon Manmade Fibers segment will be presenting itself at the Egy Stitch & Tex 2020 between March 5 and 8, 2020 in Cairo – with a clear focus on the needs of the African market. In Hall 1, Stand B2 The Oerlikon Barmag and Oerlikon Neumag experts will also be showcasing the comprehensive product and service portfolio of the world market leader for manmade fiber systems at the stand of Oerlikon’s representative ATAG Export & Import.

The spotlight of the Oerlikon Manmade Fibers segment’s trade fair attendance will be on two core technologies: the new generation of Oerlikon Barmag eAFK Evo texturing machines is to be unveiled within the African market for the very first time. It promises higher speeds and productivity with consistently high product quality, along with lower energy consumption and simpler operation vis-à-vis comparable market solutions. In particular, the numerous value-added features include two that convince with cutting-edge technology: the optimized, innovative EvoHeater and the EvoCooler, a completely newly-developed active cooling unit.

The second technology focus offers new opportunities for the Egyptian market and the Middle Eastern markets in particular: with Oerlikon Neumag’s BCF S8 monocolor and tricolor system, the segment will be unveiling its new carpet yarn production flagship. Superlative spinning speeds, up to 700 individual filaments, finer titers of up to 2.5 dpf – the performance data and technological finesse of the new system have already made a huge impression at numerous trade fairs and roadshows over the past year. The tricolor’s core component is the new, patent-pending Color Pop Compacting unit (CPC-T) for even more flexible and more even color separation. With the CPC-T, individually-controllable air pressures for each color provide pre-tangling, which accentuates the colors and hence makes more than 200,000 different shades possible. Whereas it has been very difficult to manufacture strongly color-separated or color-accentuated BCF yarns from polyamide 6 to date, this will in future be possible thanks to the CPC-T system. As a result of the new design, the CPC-T is now also suitable for processes with low yarn tensions.
 
Expanded product offering for manufacturing carpet yarns
Know-how covering all relevant technologies deployed in manmade fiber spinning plants enables Oerlikon – as the world’s only manufacturer – to expand its range of products and services for making carpet yarns. The POY- and texturing-based system concept is designed for a carpet and home textiles segment that demands particularly soft and bulky polyester yarns with BCF-like properties. Here, the aim is to produce yarns with titers of max. 1300dtex and typically more than 1,000 filaments, with typical products including, for example, 1300dtex f1152, 660dtex f1152 and 990dtex f768. The machine concept comprises the well-known WINGS HD POY winder, along with the eAFK Big-V texturing machine.