From the Sector

This year’s edition of ITMA ASIA + CITME proved to be a success for the exhibiting VDMA member companies. Measured by booked square metres, Germany had the largest contingent, among the foreign exhibitors. More than 40 VDMA member companies were exhibiting their innovative products in Shanghai.

Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association noted: “Although facing a difficult market situation, this year’s edition of ITMA ASIA + CITME has exceeded the expectations, both in terms of the number of visitors and the quality of the talks. The significant number of foreign visitors to the fair was particularly pleasing.”

Solutions were demonstrated for more sustainable textile productions by most of the exhibitors, and here the VDMA members presented their technologies for saving water, energy and raw materials under the heading “Smart technologies for green textile production.”  

Dr. Uwe Rondé, CEO, Saurer Intelligent Technology AG explained: “Saurer is satisfied with both the number of visitors and the quality of the discussions. Our booth was full from morning to evening with customers focused on latest technologies within the three mega trends: recycling, automation and digitalisation. Although machine utilisation in the spinning mills is still well below average, people are already gathering information and thinking about what to invest in once the market recovers.”

Benjamin Reiners, owner of Reiners + Fürst stated: „This year’s ITMA ASIA + CITME has exceeded our expectations by far. Especially the first day - a Sunday - has brought many high-quality customers and exclusively decision makers to our booth. We estimate about 20% international customers mainly from Bangladesh, Egypt, India, Iran, Pakistan, Uzbekistan and Vietnam. All customers agreed that the market situation at the moment is difficult, capacity usage is between 50-75% in the ring spinning sector and improvement is expected not before the 2nd half of 2024. Nevertheless the general spirit is very positive.“

“This ITMA ASIA was a great success for Trützschler. We welcomed a large number of Chinese visitors to our booth, as well as a significant number of interested international visitors”, said Dr. Bettina Temath, Head of Global Marketing Trützschler Group SE.

Georg Stausberg, CEO of the polymer processing solutions division and chief sustainability officer of the Oerlikon Group stated: „We can look back on a successful show where we were able to meet many of our customers not only from China, but also from Pakistan, India and Indonesia, for example.”

“A very well-attended trade fair, with interesting discussions, great innovative topics, in line with the modern and rapidly developing China" noted Wolfgang Schöffl, head of product line weaving machines and member of the extended management, Lindauer Dornier.

The VDMA Textile Machinery Association and VDMA China were present at the fair, to support the members e.g. with regard to IPR. With the help of a VDMA expert and a contracted law firm, the member company Sahm submitted a complaint application for patent infringement disputes during the exhibition to the onsite IPR office. Both parties, Sahm, and the Chinese company, that used patented design without permission reached an agreement: The Chinese company had to stop displaying functions and designs involving patent infringement on site which meant the removal of some structural parts and the covering of key components protected by patent protection.

Dr. Harald Weber, managing director of VDMA Textile Machinery concluded: “Asia, and China in particular, represent the primary foreign markets for the VDMA member companies in the sector. The Chinese market is the main destination for their exports. Other major export destinations in Asia include India, Pakistan, Bangladesh and Uzbekistan. ITMA ASIA + CITME provides a unique platform to showcase technologies for customers directly in Asia. The VDMA member companies are looking forward to the coming edition of the fair from 14 to 18 October 2024 in Shanghai.”

The latest survey of VDMA members' subsidiaries in China gives reason to hope that the economic situation in the Chinese textile industry could also improve significantly in the second half of the year. In addition, European textile machinery manufacturers are urged to be present on the most important market and at the trade fair and to offer Asian customers most advanced technology for their demanding challenges.

At this year’s Techtextil India, the Polymer Processing Solutions Division of the Swiss Oerlikon group will be presenting the trade audience with new applications, special processes and sustainable solutions focusing on the production of industrial textiles. Between September 9 and 12, the discussions at Jio World Convention Centre (JWCC), Mumbai, will be concentrating on airbags, seat belts, tire cord, geotextiles, filter nonwovens and their diverse applications.

More polyester for airbags
The yarns used in airbags are made predominantly from polyamide. As a result of increasingly diverse airbag applications and also the increasing size of the systems used, polyester is today used as well, depending on the application requirements and cost-benefit considerations. Against this background, the Oerlikon Barmag technol-ogies make an invaluable contribution. In addition to high productivity and low energy consumption, they particularly excel in terms of their stable production processes. Furthermore, they comply with every high quality standard for airbags, which – as in the case of virtually all other textile products used in vehicle construction – must provide the highest level of safety for vehicle occupants - without any loss of function in any climate and for the lifetime of the vehicle

Buckle up!
Seat belts have to withstand tensile forces in excess of three tons and simultaneously stretch in a controlled manner in emergencies in order to reduce the load in the event of impact. A seat belt comprises approximately 300 filament yarns, whose individual, high-tenacity yarn threads are spun from around 100 individual filaments. “With our unique, patented Single Filament Layer Technology, we offer a sophisticated and simultaneously gentle high-tenacity (HT) yarn process for manufacturing these lifesavers and other applications made from industrial yarn”, explains André Wissenberg, Head of Marketing.

Road reinforcement using geotextiles
Low stretch, ultra-high tenacity, high rigidity – industrial yarns offer outstanding properties for the demand-ing tasks carried out by geotextiles; for instance, as geogrids in the base course system under asphalt. Normally, geotextiles have extremely high yarn titers of up to 24,000 denier. Oerlikon Barmag system concepts simultaneously manufacture three filament yarns of 6,000 denier each. Due to the high spinning titers, fewer yarns can be plied together to the required geo-yarn titer in a more cost- and energy-efficient manner.

hycuTEC –  quantum leap for filter media
In the case of its hycuTEC hydro-charging solution, Oerlikon Neumag offers a new technology for charging nonwovens that increases filter efficiency to more than 99.99%. For meltblown producers, this means material savings of 30% with significantly superior filter performance. For end users, the consequence is noticeably improved comfort resulting from significantly reduced breathing resistance. With its considerably lower water and energy consumption, this new development is also a future-proof, sustainable technology.

Finishing machinery specialist Monforts has secured a number of major orders from textile manufacturers in Central and South America recently, and was pleased to welcome a high number of visitors from the region to its stand at ITMA 2023 in Milan from June 8-14.

Among new orders are those for three Montex stenters delivered to the AustralTex Group in Argentina and a further Montex range to denim manufacturer CIT in Brazil. Guatemala’s Global Textiles placed an order for its second Montex stenter, while Mexico’s Zentrix ordered its third and Avante, also in Mexico, has opted for its sixth.

Elsewhere, orders have also been placed for the delivery of three new Montex stenters to one of Pakistan’s major corporations, as well as a new Thermex dyeing range to nonwovens manaufacturer Orsa in Italy. Further orders – both for new machines and retrofit modules – are now anticipated following ITMA 2023, which attracted over 111,000 visitors to Milan.

“Visitor footfall at ITMA 2023 was well beyond the company’s expectations, and we were especially pleased at the constant number of visitors from South American companies, as well as from Asia and Europe,” said Monforts Marketing Manager Nicole Croonenbroek. “We were able to provide them with detailed information about our portfolio of machines and technologies digitally and fielded an unprecedented number of serious enquiries, many of which promise to turn into new business.”

Monforts Montex stenters for processes such as drying, stretching, heat-setting and coating, she added, are already the industry standard for the fabric finishing industry, providing a number of advantages in terms of production throughput and especially in energy efficiency and resource savings. Other key technologies in the Monforts portfolio include relaxation dryers, Thermex dyeing ranges and Monfortex compressive shrinking ranges.

Montex®Coat
“We were also very pleased with the interest in the Montex®Coat, the latest addition to our range of technologies, which we displayed in Milan,” Croonenbroek said.

The Montex®Coat can serve a very diverse number of markets and enables full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments, as well as solvent coatings. Knife coating, roller coating or screen printing can also all be accommodated with this system. It provides the ultimate in flexibility and the ability to switch quickly from one fabric run to the next, without compromising on the economical use of energy or raw materials.

Many refinements have been made to the Montex®Coat in the past few years, resulting in higher coating accuracy and the resulting quality of the treated fabrics. A number of advanced new improvements were introduced in Milan, including automatic edge limiters for immediately adapting to new coating widths and a new and simplified hand-held control device. These save considerable time in setting up the machine and ensuring consistent production.

The Montex®Coat unit displayed in Milan was sold to Vietnamese company Thai Tuan during the show.

At ITMA 2023 in Milan from June 8-14, Fong’s Europe will introduce its latest THEN Synergy Airflow and THEN Airjetwin machines, which exploit the principle to provide high-quality, efficient and eco-friendly dyeing processes for a variety of fabrics.

“THEN introduced its first machines with Airflow technology in 1980 and since then we have had wide experience of pretreating and dyeing with Airflow transport systems on all kind of fabrics,” says Fong’s Europe Director of Sales and Marketing Richard Fander. “Our team of engineers has collected data on dyeing processes, results and consumption figures for years and constantly makes use of this accumulated know-how to optimise the processes of our customers.

“The THEN team understands Airflow dyeing processes and technology based on it guarantees the lowest liquor ratio on round shape machines. The transport of fabric by air reduces the liquor ratio compared to every kind of hydraulically driven transport system.”

He adds that while not every fabric can be dyed and treated on Airflow machines with the same handle and appearance as on hydraulic round shape or long shape machines, where it is applicable, it can lead to significant savings of up to 35% in water, 50% in salt, 20% in dyestuffs and 30% in process time.

The THEN Airflow dyeing machines have several features, including several parallel functions for reducing process time. The VPR system shortens the rinsing time and water usage and the robust and homogeneous spraying device in the nozzle ensures a uniform dyeing in the shortest process time. The very short liquor ratio also reduces the use of salt and chemicals.

With its new Trend and Event Platform, the Premium Group presents a new concept for a progressive community. According to Premium Group classic trade fair formats are over - this summer it's all about (re)connection, real emotions and new perspectives. The emphasis lies on the most relevant trends and the power of networking, but in a more personalised and intimate way.

PREMIUM and SEEK are focusing on a more rigorous curation of promising brands and collections as well as various opportunities to connect. An extensive content programme of keynotes, round tables, live interviews, study presentations and panels on the most important trends will offer two diverse and time-efficient days. The areas of concentration encompass sustainability, technology, fashion, business, lifestyle, and beauty. The repertoire of topics include marketing themes such as LinkedIn and Tik Tok, new tech tools such as ChatGPT or Virtual Dressing as well as news from the metaverse. Sustainability topics such as denim, circularity, re-commerce, vintage and the new Green Deal laws will be discussed as well as cross-industry topics such as female empowerment, Gen Z and modern leadership.
     
PREMIUM marks the first event of the season for womenswear. New silhouettes, design trends, provocation and the current zeitgeist are brought to the forefront with a carefully curated selection of brands. The fashion scene and visitors can look forward to the best of denim, hyper-femininity, beauty, well-being, future Berlin icons and innovations from the tech and lifestyle sphere. New talents will also have the opportunity to pitch their labels to a professional audience. SEEK focuses on heritage, Y2K, modern sportswear, outdoor and sustainable brands, which will be shown in the CONSCIOUS CLUB. Other highlights will include talks and inspiring activations from the community.

"We listen, research and curate the most important trends for the industry. To do this, our team of experts travels across Europe and exchange ideas with representatives from the entire industry. The results of months of work can be discovered in two days," says Maren Wiebus, Creative Director of the Premium Group.

Today, attention is the most important currency for the fashion industry. This is also why, for the very first time ever, the Premium Group events will take place over only two days instead of three. At the same time, generally accepted norms and rules are questioned, taken apart, and put back together again. The organisers of Premium Group invite fashion professionals to discuss the rules and redefine them together.
 
The summer editions of PREMIUM and SEEK will take place on 11 and 12 July at the new old location Station-Berlin in the heart of Berlin.

CHIC - China International Fashion Fair starts the new year with a new date and fresh ideas. The unrestricted entry to China is possible again and CHIC March will be postponed by three weeks to facilitate visa applications.

From March 28 to 30, 2023 around 1,600 exhibitors will meet on 117,200 sqm at CHIC at the National Exhibition & Convention Center (NECC) in Shanghai.

In 5 halls the fair presents itself in clearly structured segments with the big players and young, up-and-coming designers as well as exciting niche brands in the areas of womenswear, menswear, kidswear, denim, shoes, bags and accessories, young fashion, sportswear, designer brands and overseas brands.

Around 120,000 trade visitors are expected at the upcoming CHIC, serving all major distribution channels in China such as large shopping malls and department stores, agents, distributors, buyers from multi-brand and concept stores, live stream providers, etc. The CHIC organizers invest in intensive visitor marketing measures. CHIC Matching, the successful networking system of CHIC, brings exhibitors and visitors together efficiently and individually. New contacts can be made and cooperation opportunities explored. Comprehensive marketing activities via all relevant channels such as the CHIC WeChat Public Account (> 200,000 subscriptions), the CNGA WeChat mini program (> 100,000 subscriptions) and TikTok ensure visibility.

New: CHIC Showroom, the innovative young showroom concept in Beijing, which is to be expanded and will enable international brands to enter the Chinese market in the medium term.

With China easing its pandemic restrictions, foreign exhibitors and buyers can look forward to quarantine-free travel when participating at this year’s industry showcase in Shanghai. The technical textile and nonwovens fair is scheduled to take place from 19 – 21 September 2023 at the Shanghai New International Expo Centre, amid positive market forecasts for both sectors. The organisers are anticipating a strong showing and the conclusion of an inconsistent period for in-person textile business.

“The industry has demonstrated incredible patience and resilience over the course of the pandemic,” said Ms Wilmet Shea, General Manager of Messe Frankfurt (HK) Ltd. “With both markets growing and China opening its borders, we are excited at the prospect of providing participants with an international, business-friendly platform and expect to welcome a healthy number of exhibitors later this year.”

The global technical textile and nonwovens markets are both set to perform strongly over the next few years. According to Grand View Research, the technical textile market is forecast to expand at a CAGR of 4.7% from 2022 to 2030^[1]. The nonwoven fabrics market is anticipated to display an even stronger CAGR of 5.6% during the same period^[2], with Asia-Pacific to maintain its position as the biggest regional market.

As one of Asia’s leading trade fairs for the abovementioned sectors, Cinte Techtextil China is the preferred platform for multiple industry players. Speaking at the previous edition in 2021, Mr Seven Shen, Sales Manager at Libero Trading (Shanghai) Co Ltd, China, said: “We have been exhibiting at this fair for years, and know we will meet our target customers at every edition. The buyers here are all highly specialised.”

During his interview at the same edition, Mr Eric Ni, Senior Manager, China Supply Chain Marketing for Cotton Council International, USA, commented: “We hope to use this platform to meet more companies and brands in the nonwovens industry who are interested in US cotton, and to meet up with old friends to discuss the current situation and industry trends. The fair’s buyers are quality, and we have found some new potential clients at this edition.”

Many buyers at the previous edition also gave positive appraisals. “As a professional trade fair for technical textile and nonwoven products, Cinte Techtextil China is not only a platform to gather qualified industry players, but also the best place to showcase new products and innovations,” said Mr Lin Bin, Technical Director at Zhejiang Xinna Medical Device Technology Co Ltd, China. “Specific and high quality products enhance sourcing efficiency for buyers, and exposure to new trends and market developments ensures my company visits here regularly.”

The fair’s product categories cover 12 application areas, which comprehensively span a full range of potential uses in modern technical textiles and nonwovens. These categories also cover the entire industry, from upstream technology and raw materials providers to finished fabrics, chemicals and other solutions. This scope of product groups and application areas ensures that the fair is an effective business platform for the entire industry.

^[1] “Technical Textile Market Size, Share & Trends Analysis Report 2022-2030”, 2022, Grand View Research, https://bit.ly/3IAxQIK, (Retrieved: January 2023)
^[2] “Nonwoven Fabrics Market Size”, 7 September 2022, GlobeNewswire, https://bit.ly/3CxPE3u, (Retrieved: January 2023)

• Strategic partnership for automation system in the field of slot dies and coextrusion adapters

Reifenhäuser Extrusion Systems (RES) - the Reifenhäuser Group's business unit specializing in extrusion components - announces a strategic partnership with maku AG at K 2022, the world's largest plastics trade fair. The aim of the cooperation is the joint marketing and further development of the automation system designed by maku for coextrusion adapters and slot dies.

The so-called PAM system (precise, autonomous, mechatronic) is available immediately and exclusively as an automation option for new Reifenhäuser dies and adapters, as well as for aftermarket dies across all manufacturers. PAM enables producers in the field of flat film and sheet production as well as extrusion coating to precisely control the entire hot part (coextrusion adapter and die) via the line's control panel. This is significantly faster and more accurate than conventional control by hand or expansion bolt automation. It enables faster start-up of good production, higher output with lower energy consumption, and thus significantly improved overall equipment efficiency (OEE). The decisive advantage lies in the use of motorized manual adjustment bolts that replace conventional thermal expansion bolts. Reifenhäuser presented the system for the first time at the K 2022.

The company’s principle theme at Techtextil was Sustainability, since FET extrusion systems are ideally suited for both process and end-product development of sustainable materials. These systems are designed to be material efficient, can be bespoke designed and offer both flexibility and a high level of processing capability. They are supplied as self-contained units for ease of installation in a laboratory or small scale process evaluation environment.

FET’s enhanced Fibre Development Centre enables clients to develop and trial their own sustainable fibres and FET has now successfully processed almost 30 different polymer types in multifilament, monofilament and nonwoven formats

The innovative stand at Techtextil was specifically designed to highlight FET’s total commitment to all aspects of sustainability. It utilised as many sustainable components as possible and met with much comment and approval from visitors.

Fibre Extrusion Technology Limited (FET) of Leeds, England enjoyed another successful Techtextil in Frankfurt, with high quality enquiries from technical companies and organisations worldwide, but in particular from customers based in Europe.

Nach pandemiebedingter Verschiebung öffnete die Techtextil in diesem Jahr vom 21. bis 24. Juni 2022 in Frankfurt am Main wieder ihre Pforten. Präsentiert wurde das gesamte Spektrum technischer Textilien, funktionaler Bekleidungstextilien und textiler Technologien. Zeitgleich fand auch die Texprocess – Leitmesse für die Bekleidungs- und textilverarbeitende Industrie – sowie einmalig auch das Heimtextil Summer Special, internationale Fachmesse für Wohn- und Objekttextilien, statt. Mit insgesamt 117 Teilnehmernationen, rund 63.000 Besuchern und 2.300 Ausstellern gelang ein fulminanter Re-Start der internationalen Textilmessen auf dem Frankfurter Messegelände.

Auch der Verband der Nord-Ostdeutschen Textil- und Bekleidungsindustrie e.V. (vti) hat auf einem Gemeinschaftsstand mit der Wirtschaftsförderung Sachsen GmbH 17 sächsischen Unternehmen die Möglichkeit geboten, ihr Know-how dem Fachpublikum zu präsentieren. Die Aussteller äußerten sich aufgrund der hohen Besucherresonanz und dem breiten Interesse an den Neu- und Weiterentwicklungen ihrer Produkte sehr zufrieden zum Abschluss der Messe.

Die Norafin Industries (Germany) GmbH präsentierte neben technischen Vliesstoffen zur Filtration auch die neue Produktpalette Komanda: Die langlebigen Materialien erfüllen die Forderungen des Marktes nach leichten, mehrfach verwendbaren, stabilen und atmungsaktiven Fabrikaten für Schutzbekleidung und Industrieanwendungen. Der Geschäftsführer, André Lang, resümierte die Messeteilnahme: „Ein großes DANKESCHÖN an die Wirtschaftsförderung Sachsen GmbH und den vti für die Organisation im Vordergrund und hinter den Kulissen und natürlich DANKE für das Catering für uns Aussteller und unsere Gäste. Wir schätzen unser eigenes Standdesign am Sachsen-Stand und die gute Partnerschaft. Wir freuen uns auf die Techtextil 2024 mit Ihnen.“

Die Beschichtungsexperten der Vowalon Beschichtung GmbH aus Treuen stellten ein neues, nachhaltiges Kunstleder vor, welches zu 51 Prozent aus nachwachsenden Rohstoffen besteht. Gemeinsam mit VW entwickelte Vowalon das biologische Füllmaterial für Autositze von E-Automobilen: Es besteht aus den sogenannten Silberhäutchen, einem Abfallprodukt der Kaffeebohne, das sich beim Rösten löst. Ob es sich bequem auf Kaffeebohnen-Schalen sitzen lässt, konnten die zahlreichen Besucher dabei begeistert selbst testen. Gregor Götz, Geschäftsführer der Vowalon Beschichtung GmbH Treuen, schätzt die Beteiligung am Gemeinschaftsstand hoch ein. „Wir haben eine sehr gute Besucherresonanz auf unser nachhaltiges Kunstleder verzeichnet. Das haben wir auch der guten medialen Vorbereitung der Messeteilnahme durch den vti zu verdanken.“

„Die Messetage sind für uns sehr positiv verlaufen und zahlreiche Besucher waren bei uns am Stand. Das Fachpublikum ist stark international und die Gespräche haben viel Potenzial für künftige Projekte", resümiert Marketingchefin Carina Schadek der Auerbacher Embro GmbH, das sich als Zulieferer von Halbzeugen für sogenannte Smart-Textilien spezialisiert hat. So ist das Unternehmen daran beteiligt, wenn sich Autositze oder Kleidung erwärmen und Textilien mit elektromagnetischen Feldern ausgestattet sind.

Das Sächsische Textilforschungsinstitut (STFI) präsentierte dem Fachpublikum textile Wandbegrünungsmatten, eine Sandwichkonstruktion aus zwei gewirkten PET-Matten mit zwischengelegtem Verteil- und Transportvliesstoff, die zu Flächengebilden verschiedener Größen zusammengefügt werden können. Die Vertikalbegrünung sorgt für einen Dämm- sowie Fassadenschutz gegen Witterung, reduziert die Hitze- und Staubbelastung und erzeugt eine nachhaltige Klimatisierung beispielsweise in Innenstädten und Fußgängerzonen.

Erstmals präsentierten sich die Techtextil und Texprocess auch virtuell. Die digitale Plattform steht noch bis zum 8. Juli 2022 zur Verfügung.
 
Die nächste Techtextil findet vom 23. bis 26. April 2024 statt.