From the Sector

Reset
26 results
Stefano Pigozzi Photo RadiciGroup
Stefano Pigozzi
30.01.2024

Stefano Pigozzi: New member at Board of Directors of Radici Partecipazioni SpA

RadiciGroup announced the appointment of Stefano Pigozzi to the Board of Directors of Radici Partecipazioni SpA, the parent company overseeing all the Group's business activities in the chemicals, engineering polymers and advanced textile solutions sectors.
 
A professional with proven experience in the chemical industry, Mr. Pigozzi will complement the Board with his strategic vision acquired in international organizations.
 
Stefano Pigozzi graduated from the University of St. Gallen in Switzerland with a degree in Business Administration and started his work experience in the finance division of BASF in the late 1980s. Since then, chemistry has remained at the centre of his career: over the years, he has held marketing and sales positions of increasing responsibility in various business sectors (plastics and inorganics), moving up to more strategic and managerial roles within BASF, including president of the Monomers Division and, most recently, head of the Group Global Purchasing Division at the Ludwigshafen headquarters.
 

RadiciGroup announced the appointment of Stefano Pigozzi to the Board of Directors of Radici Partecipazioni SpA, the parent company overseeing all the Group's business activities in the chemicals, engineering polymers and advanced textile solutions sectors.
 
A professional with proven experience in the chemical industry, Mr. Pigozzi will complement the Board with his strategic vision acquired in international organizations.
 
Stefano Pigozzi graduated from the University of St. Gallen in Switzerland with a degree in Business Administration and started his work experience in the finance division of BASF in the late 1980s. Since then, chemistry has remained at the centre of his career: over the years, he has held marketing and sales positions of increasing responsibility in various business sectors (plastics and inorganics), moving up to more strategic and managerial roles within BASF, including president of the Monomers Division and, most recently, head of the Group Global Purchasing Division at the Ludwigshafen headquarters.
 
During his more than 30-year career at BASF, Mr. Pigozzi has consistently demonstrated his leadership capability, his financial analysis skills and his dedication to corporate business success. He has also contributed significantly to the positioning of BASF as a global leader in the chemical industry.
 
Mr. Pigozzi’s appointment to the Board of Directors of Radici Partecipazioni is aimed at strengthening RadiciGroup's presence in the market and helping to guide the company towards new goals.

 

Source:

RadiciGroup

Graphic: ReHubs
05.12.2023

ReHubs: First General Assembly

During its first General Assembly, 18 European companies and organisations have formally joined ReHubs. They represent different segments of the circular textile value chain and share a common commitment to invest in textile recycling capacity in Europe. Additional partners are expected in the near future.

Current ReHubs partners are BASF, Boer Group, Coleo, Concordia Textiles, Decathlon, EURATEX, Gherzi Textil Organisation, Inditex, Indorama Ventures, Mango, PEPPER-i2, Purfi, Ratti, Recover, Refashion, Resortecs, Rester, RETEX.GREEN and TEXAID.

All partners will support ReHubs Executive Director, Chris Deloof, to kick start activities in the coming months. ReHubs partners will elaborate together on further steps and activities for the forthcoming work plan and the development of the European Textile Recycling Roadmap.

Chris Deloof commented: “I am delighted to see such a strong group of organisations teaming up with ReHubs. They are a great example of how to establish a new circular textile value chain in Europe. We need to focus now on rolling out ReHubs investment projects and further expanding our partners and investors network.”

During its first General Assembly, 18 European companies and organisations have formally joined ReHubs. They represent different segments of the circular textile value chain and share a common commitment to invest in textile recycling capacity in Europe. Additional partners are expected in the near future.

Current ReHubs partners are BASF, Boer Group, Coleo, Concordia Textiles, Decathlon, EURATEX, Gherzi Textil Organisation, Inditex, Indorama Ventures, Mango, PEPPER-i2, Purfi, Ratti, Recover, Refashion, Resortecs, Rester, RETEX.GREEN and TEXAID.

All partners will support ReHubs Executive Director, Chris Deloof, to kick start activities in the coming months. ReHubs partners will elaborate together on further steps and activities for the forthcoming work plan and the development of the European Textile Recycling Roadmap.

Chris Deloof commented: “I am delighted to see such a strong group of organisations teaming up with ReHubs. They are a great example of how to establish a new circular textile value chain in Europe. We need to focus now on rolling out ReHubs investment projects and further expanding our partners and investors network.”

More information:
ReHubs
Source:

ReHubs

INDA: Tampon by Sequel won 2023 Hygienix Innovation Award™ (c) INDA
20.11.2023

INDA: Tampon by Sequel won 2023 Hygienix Innovation Award™

INDA, the Association of the Nonwoven Fabrics Industry, connected absorbent hygiene and personal care professionals throughout the supply chain at the ninth edition of Hygienix™, the event for absorbent hygiene & personal care markets, held in New Orleans, Louisiana, Nov. 13-16.

Senior-level leaders enjoyed presentations in these key topics affecting the future of absorbent hygiene:

INDA, the Association of the Nonwoven Fabrics Industry, connected absorbent hygiene and personal care professionals throughout the supply chain at the ninth edition of Hygienix™, the event for absorbent hygiene & personal care markets, held in New Orleans, Louisiana, Nov. 13-16.

Senior-level leaders enjoyed presentations in these key topics affecting the future of absorbent hygiene:

  • AHP Trends, Innovation & Market Statistics
  • Redefining Absorbent Hygiene: Navigating Consumer Voice, Sustainable Innovations and the Circular Economy
  • The Proof Is in the Pudding – Demonstrating What’s Possible in AHP
  • Sustainability Inside & Out – Inputs & Packaging
  • Words Matter! Shaping Consumer and Industry Thoughts
  • Neither Fish nor Fowl: Designing Hybrid AHP Products
  • There Be Dragons: Tales of Innovation

The winner of the Hygienix Innovation Award™ was the Sequel Spiral™ Tampon by Sequel. The Sequel Spiral™ Tampon features a proprietary spiral design that is engineered to be more fluid mechanically efficient, meaning it is designed to absorb more evenly and not leak before it’s full. In August 2023, the Sequel Spiral™ Tampon received clearance from the United States Food and Drug Administration (FDA) as a medical device and the company will now begin a series of consumer trials, with broad availability expected in Q1 of 2024.

New this year to Hygienix was Lightning Talks and pre-conference webinars. Lightning Talks are short presentations covering new trends, products and ideas in absorbent hygiene. The pre-conference webinar topics featured the new Quality Audit Program from INDA and EDANA, an in-depth look at the period care product category, and North American trends and insights in baby diapers.

Back was a hands-on workshop providing attendees with information on the various absorption systems used in disposable hygiene products. This workshop focused on the components and interaction of the absorption system in common commercial hygiene products. The workshop was led by Jim Robinson, Principal, Absorbent Hygiene Insights, LLC.

Jim Robinson received the honor of being named the 2023 INDA Lifetime Technical Achievement Award winner for his decades of technical advancements that have grown the nonwovens industry. Robinson has 33 years in the absorbent hygiene industry, including 28 years as a Technical Service Manager at BASF. Robinson has extensive knowledge of SAP applications, absorbent core formation, and hygiene article design, performance and testing.

Hygienix 2024 will be held Nov. 18-21, in Nashville, Tennessee.

More information:
INDA nonwovens Hygienix Sequel
(c) INDA
10.05.2023

Four Nonwoven Industry Professionals honored with INDA Lifetime Awards

NDA, the Association of the Nonwoven Fabrics Industry, announced four recipients for the Lifetime Service Award and Lifetime Technical Achievement Awards. Jan O’Regan, Seshadri Ramkumar, Jim Robinson, and Ed Thomas are being recognized for their key contributions to the growth of the nonwovens industry and INDA.

NDA, the Association of the Nonwoven Fabrics Industry, announced four recipients for the Lifetime Service Award and Lifetime Technical Achievement Awards. Jan O’Regan, Seshadri Ramkumar, Jim Robinson, and Ed Thomas are being recognized for their key contributions to the growth of the nonwovens industry and INDA.

Jan O’Regan: INDA Lifetime Service Award
Jan O’Regan was the Director, Strategic Initiatives and Nonwovens Marketing, for Cotton Incorporated and retired in 2022. In this capacity, she uncovered new opportunities for cotton to bring value into the nonwovens industry. Her work included leading efforts in strategic planning, technical and market project management, and sharing new ideas and results with the global supply chain.
O’Regan spent over four decades in the nonwovens industry in various roles, including sales, marketing, strategic planning and business management. Market responsibilities included consumer and industrial markets on regional, national, and global teams. Over the most recent years, she applied these broad experiences to new markets for cotton in nontraditional applications.
Serving and volunteering with INDA for decades, O’Regan most recently chaired the World of Wipes® committee, which she efficiently organized to produce innovative conferences for the wipes industry.  She was a frequent speaker at INDA, INSIGHT, EDANA, and other events, and for nearly two decades was a go to source of information for cotton fibers in nonwovens and hygiene. O’Regan earned a BS in Textiles and Business, summa cum laude, from Penn State University and an MBA from New York University’s Stern School of Business.

Seshadri Ramkumar: INDA Lifetime Technical Achievement Award
Seshadri Ramkumar has over twenty-five years of experience within the technical nonwovens space, conducting industry leading research and educating nonwovens professionals at Texas Tech University (TTU).  At TTU, he established the Nonwovens Laboratory. Many of Ramkumar’s students have gone on to become technical leaders within their organizations and the nonwovens industry.
Ramkumar has numerous patent and invention disclosures, including Fibertect® toxic chemical decontamination wipes which have been recognized by the American Chemical Society as a notable success of federally supported innovation, endorsed by Lawrence Livermore National Laboratory, and adopted by multiple branches of the military.
In addition to many peer-reviewed publications, articles, and columns collectively over 500, including one on nanofibers that has been cited over 2,100 times, Ramkumar has contributed his expertise on the editorial boards of multiple fiber, nonwoven, and textile journals. Ramkumar has also organized conferences for nonwovens and textiles and actively promoted INDA and its technical training offerings for over 20 years.
He is a longtime member of the INDA Technical Advisory Board, been recognized by TAPPI, Society of Dyers and Colorists (UK), the Textile Institute (UK), and the Textile Association (INDIA), and received numerous awards from TTU.
Ramkumar holds a Bachelors of Technology (Textiles), Graduated with Distinction, and a Masters of Technology (Textiles), University First Rank in the Discipline, Anna University, and a Ph.D. (Textile Materials) from the University of Leeds, UK.

Jim Robinson: INDA Lifetime Technical Achievement Award
Jim Robinson has 33 years in the absorbent hygiene industry, including 28 years as a Technical Service Manager at BASF. He led technical teams that focused on the application of superabsorbent polymers (SAP) in hygiene products. Robinson has extensive knowledge of SAP applications, absorbent core formation, and hygiene article design, performance and testing. While with BASF, Robinson led efforts with multiple external companies to provide co-supplier solutions to hygiene converters.
Robinson’s extensive understanding of test methods and test method development led to his coordinating the establishment of fitness for use standards of adult incontinent products with the National Association for Continence and involvement in development and review of absorbent product test methods with INDA/EDANA. He is also an active contributor to INDA’s Technical Advisory Board and Hygienix organizing committee and was a contributing developer in establishing the INDA Absorbent Hygiene Training Course. Robinson has provided numerous presentations at INSIGHT, Hygienix, and RISE on performance and interactions of absorbent system components.
Recently, Robinson has been consulting and contributing to the success of multiple start-ups including those having been nominated for INDA product awards. Robinson has a BS in Chemistry from Hampden-Sydney College and an MS in Chemistry from Duke University.

Ed Thomas: INDA Lifetime Technical Achievement Award
Ed Thomas retired after 39 years, with 32 years in the nonwovens industry, and has remained active teaching the Intermediate Nonwovens Training Course for INDA and The Nonwovens Institute at North Carolina State University, as well as providing consulting services to the industry.
Thomas’ experience includes Process Engineering Manager and Plant Management, DuPont; Technical Director, Reemay; VP of Research and Operations, VP of Operations and Technology, and Global VP of Research and Development for Fiberweb/BBA Nonwovens; and Head of Research and Product Development, First Quality Nonwovens.
Thomas holds 10 U.S. nonwoven patents and he and his teams have been awarded more than 250 patents for numerous and diverse innovations that have played significant roles in the success of the nonwovens industry. These include applications for the global hygiene market, industrial nonwovens, and filtration media.
During his career, Thomas has presented several keynote addresses and papers to industry conferences, participated in North Carolina State University’s Nonwovens Cooperative Research Center (NCRC) prior to it becoming The Nonwovens Institute (NWI), INDA’s Technical Advisory Board, INDA’s Sustainability Committee, and was Vice Chair of NWI’s Industrial Advisory Board prior to retirement and remains an Emeritus member.
Thomas received his mechanical engineering degree from SUNY Buffalo.

(c) Archroma
16.02.2023

Archroma closing acquisition of Huntsman Textile Effects on 28 February 2023

Archroma, a manufacturer of sustainable specialty chemicals and solutions for industries such as textiles, packaging & paper, paints and coatings, announced that it has secured all regulatory approvals required to complete the acquisition of the Textile Effects business from Huntsman Corporation (“Huntsman Textile Effects”).

Both parties expect the transaction, which was first announced on 09 August 2022, to close on 28 February 2023.

Archroma is a portfolio company of US-based private investment firm SK Capital Partners. Since its formation in 2013, Archroma acquired and successfully integrated the global textile chemicals businesses of BASF as well as BASF’s stilbene-based OBA business for paper applications, and M. Dohmen, a specialist in coloration for automotive textiles.

Archroma, a manufacturer of sustainable specialty chemicals and solutions for industries such as textiles, packaging & paper, paints and coatings, announced that it has secured all regulatory approvals required to complete the acquisition of the Textile Effects business from Huntsman Corporation (“Huntsman Textile Effects”).

Both parties expect the transaction, which was first announced on 09 August 2022, to close on 28 February 2023.

Archroma is a portfolio company of US-based private investment firm SK Capital Partners. Since its formation in 2013, Archroma acquired and successfully integrated the global textile chemicals businesses of BASF as well as BASF’s stilbene-based OBA business for paper applications, and M. Dohmen, a specialist in coloration for automotive textiles.

Heike van de Kerkhof, Archroma Group Chief Executive Officer (CEO), commented: “We are very excited to see this acquisition nearing completion. I am deeply grateful to the project teams of Archroma and Huntsman who are preparing for a smooth transition for our employees and partners. After closing, we will be able to bring together our expert teams and highly complementary product portfolios to offer our customers and brand partners the high performance they expect, whilst respecting natural resources and the planet.”

Source:

Archroma

Dr. Isabella Tonaco Photo: SCTI
13.10.2022

Isabella Tonaco Executive Director at SCTI

Sustainable Chemistry for the Textile Industry (SCTI™) has appointed Dr. Isabella Tonaco as Executive Director, effective November 1, 2022. With a mandate to inspire and trigger action at a global level, she will lead SCTI to drive transformational change in the textile and leather industries.
 
Launched two years ago by seven of the world's leading chemical companies, the SCTI Alliance aims to enable brands, retailers and manufacturers to apply cutting-edge sustainable chemistry solutions that enhance the well-being of factory workers, local communities, consumers and the planet.
 
Dr. Tonaco will oversee SCTI activities to implement this mission. Based in Germany, she will work with SCTI member companies and stakeholders across the textile and leather value chain to help the industry achieve the highest levels of sustainability. Dr. Tonaco will report to the SCTI Executive Committee.
 

Sustainable Chemistry for the Textile Industry (SCTI™) has appointed Dr. Isabella Tonaco as Executive Director, effective November 1, 2022. With a mandate to inspire and trigger action at a global level, she will lead SCTI to drive transformational change in the textile and leather industries.
 
Launched two years ago by seven of the world's leading chemical companies, the SCTI Alliance aims to enable brands, retailers and manufacturers to apply cutting-edge sustainable chemistry solutions that enhance the well-being of factory workers, local communities, consumers and the planet.
 
Dr. Tonaco will oversee SCTI activities to implement this mission. Based in Germany, she will work with SCTI member companies and stakeholders across the textile and leather value chain to help the industry achieve the highest levels of sustainability. Dr. Tonaco will report to the SCTI Executive Committee.
 
Dr. Tonaco has more than a decade of experience in sustainability and has held various strategic and commercial roles in the chemical industry. Most recently, she was Vice President of Strategy Execution and Marketing for Renewable Polymers & Chemicals at Neste, a global leader in renewable and circular solutions. Previously, Dr. Tonaco worked for BASF, where she established and executed the company's global leadership position in certified sustainable palm-based ingredients for the Personal Care industry.

09.08.2022

Archroma to acquire the Textile Effects business of Huntsman Corporation

Archroma, a global leader in sustainable specialty chemicals and solutions and a portfolio company of U.S.-based private investment firm SK Capital Partners (“SK Capital”), announced it has entered into a definitive agreement to acquire the Textile Effects business (“Textile Effects”) from Huntsman Corporation. Closing of the transaction is subject to customary conditions and approvals and is expected to take place in the first half of 2023.

Since its formation in 2013, through a series of mergers & acquisitions, as well as internal investments in R&D, manufacturing and service capabilities, Archroma has been building a comprehensive portfolio of solutions to serve the emerging needs of the textile industry. The combination with Textile Effects and its rich historical roots of Huntsman and Ciba Specialties will create a technology powerhouse that will include Archroma’s legacy heritages of Sandoz, Hoechst, Clariant, BASF and Dohmen who have been at the cutting edge of the textile industry for decades, and together will continue to serve customers for years to come.

Archroma, a global leader in sustainable specialty chemicals and solutions and a portfolio company of U.S.-based private investment firm SK Capital Partners (“SK Capital”), announced it has entered into a definitive agreement to acquire the Textile Effects business (“Textile Effects”) from Huntsman Corporation. Closing of the transaction is subject to customary conditions and approvals and is expected to take place in the first half of 2023.

Since its formation in 2013, through a series of mergers & acquisitions, as well as internal investments in R&D, manufacturing and service capabilities, Archroma has been building a comprehensive portfolio of solutions to serve the emerging needs of the textile industry. The combination with Textile Effects and its rich historical roots of Huntsman and Ciba Specialties will create a technology powerhouse that will include Archroma’s legacy heritages of Sandoz, Hoechst, Clariant, BASF and Dohmen who have been at the cutting edge of the textile industry for decades, and together will continue to serve customers for years to come.

Both Archroma and Textile Effects are founding members of Sustainable Chemistry for the Textile Industry (SCTI), an alliance of leading chemical companies that strives to empower the textile and leather industries to apply sustainable, state-of-the-art chemistry solutions that protect factory workers, local communities, consumers and the environment.

Source:

Archroma

19.06.2022

DyStar Celebrates 125 Years of Indigo Excellence

The story started with a huge market demand for the industrial synthesis of Indigo during the late nineteen century. The first Industrial Synthesis of Indigo, Indigo Pure BASF, was successfully manufactured and introduced into the market by BASF in July 1897. It was a significant achievement for the German Chemical Industry.

Over the years, the product has made revolutionary changes to the supply chain. New technologies enabled the transformation of Synthetic Indigo Powder application to pre-reduced DyStar® Indigo Vat 40% Solution. Being the pioneer in the market, the pre-reduced solution set an important industry milestone when it was first launched in 1998.

DyStar’s innovation remains a core catalyst in our chemistry research and development journey. When the DyStar® Indigo Vat 40% Solution was introduced, the core intelligence lies behind the benefits from Sustainability to Health and Safety. The technology transforms Indigo into its soluble Leuco form, making the Indigo dyeing process more sustainable, efficient, and stable in production. In addition, workers in Denim Mills can be assured of product safety as well.

The story started with a huge market demand for the industrial synthesis of Indigo during the late nineteen century. The first Industrial Synthesis of Indigo, Indigo Pure BASF, was successfully manufactured and introduced into the market by BASF in July 1897. It was a significant achievement for the German Chemical Industry.

Over the years, the product has made revolutionary changes to the supply chain. New technologies enabled the transformation of Synthetic Indigo Powder application to pre-reduced DyStar® Indigo Vat 40% Solution. Being the pioneer in the market, the pre-reduced solution set an important industry milestone when it was first launched in 1998.

DyStar’s innovation remains a core catalyst in our chemistry research and development journey. When the DyStar® Indigo Vat 40% Solution was introduced, the core intelligence lies behind the benefits from Sustainability to Health and Safety. The technology transforms Indigo into its soluble Leuco form, making the Indigo dyeing process more sustainable, efficient, and stable in production. In addition, workers in Denim Mills can be assured of product safety as well.

Similarly, in recent modules under Cadira® Denim, DyStar introduced the first salt-free Indigo dyeing process in history. The applied technology completely eliminates hydrosulphite in the application of Indigo.

More information:
DyStar Indigo indigo dyeing process
Source:

Dystar

(c) ​Yanfeng
15.06.2022

Yanfeng honors its suppliers in Europe

Yanfeng, a global automotive supplier, recognized the performance of its European suppliers with its annual Supplier Awards. During a ceremony at the company’s European Headquarters in Neuss, a total of 13 suppliers yesterday received the awards in two categories.

With one Distinguished Supplier award and twelve Supplier Excellence awards in five sub-categories, YF evaluated its suppliers according to several criteria. The company’s vision of technology and innovation, as well as sustainability, were particularly important. Moreover, quality, cost, service and customer satisfaction were also assessed.

The award recipients from Europe were:

Distinguished Supplier Award:
- BASF Polyurethanes GmbH, Germany

Supplier Excellence Award – Quality:
- Industrias Alegre S.A., Spain

Supplier Excellence Award – Customer Satisfaction:
- DSSI International, LLC, Slovakia
- SIGIT d.o.o., Serbia

Supplier Excellence Award – Sustainability:
- HOFFMANN + VOSS GmbH, Germany

Supplier Excellence Award – Technology and Innovation:
- SemsoTec GmbH, Germany
- Lightworks GmbH, Germany

Yanfeng, a global automotive supplier, recognized the performance of its European suppliers with its annual Supplier Awards. During a ceremony at the company’s European Headquarters in Neuss, a total of 13 suppliers yesterday received the awards in two categories.

With one Distinguished Supplier award and twelve Supplier Excellence awards in five sub-categories, YF evaluated its suppliers according to several criteria. The company’s vision of technology and innovation, as well as sustainability, were particularly important. Moreover, quality, cost, service and customer satisfaction were also assessed.

The award recipients from Europe were:

Distinguished Supplier Award:
- BASF Polyurethanes GmbH, Germany

Supplier Excellence Award – Quality:
- Industrias Alegre S.A., Spain

Supplier Excellence Award – Customer Satisfaction:
- DSSI International, LLC, Slovakia
- SIGIT d.o.o., Serbia

Supplier Excellence Award – Sustainability:
- HOFFMANN + VOSS GmbH, Germany

Supplier Excellence Award – Technology and Innovation:
- SemsoTec GmbH, Germany
- Lightworks GmbH, Germany

Supplier Excellence Award – Service:
- CTP, Czech Republic
- Milsped d.o.o., Serbia
- Prewave GmbH, Austria
- Schneider Electric SE, France
- SPARETECH GmbH, Germany
- Weber GmbH & Co. KG, Germany

Source:

Yanfeng

(c) Schoeller Textil AG
19.07.2021

Change in leadership at Schoeller Textil AG: Kath succeeds Winkelbeiner

Schoeller Textil AG, the Swiss textile and technology company, announces a shift in leadership as Joachim Kath takes over as CEO. Following a 10-year career at the global textile solutions brand, CEO Siegfried Winkelbeiner is moving into his retirement later this month. Joachim Kath, who comes from the chemical industry, has been working closely with Winkelbeiner as COO at Schoeller for the past year and a half.

Schoeller Textil AG, the Swiss textile and technology company, announces a shift in leadership as Joachim Kath takes over as CEO. Following a 10-year career at the global textile solutions brand, CEO Siegfried Winkelbeiner is moving into his retirement later this month. Joachim Kath, who comes from the chemical industry, has been working closely with Winkelbeiner as COO at Schoeller for the past year and a half.

The transition comes after long-term planning. Since February 2020, and in close partnership with Siegfried Winkelbeiner, Joachim Kath (on the left) has been preparing as Schoeller COO to take over its management. Joachim Kath originally comes from Flensburg (DE) and, following his studies of Chemical Engineering in Karlsruhe, shaped his professional career in the chemical industry with Ciba (-Geigy) / BASF in Basel (CH). His career over 30 years has incorporated engineering, production and marketing & sales in diverse management functions – in a wide range of business segments for various industries and areas of application around the globe. Joachim Kath spent 12 years of his career dedicated to textile finishing, with a period of intensive travel in Asia and a 3-year stay in the USA.

Asked how he sees himself, Joachim Kath said: “The common thread running through all my assignments and business activities is process orientation, interest in new paths, and an instinct for what is feasible – with the goal of achieving customer benefits and satisfaction. Kath aims to ensure that Schoeller can continue to face the challenges of changing market requirements with outstanding and exceptional products, while evolving and innovating to stay ahead of consumer needs for the future. High performance capability, sustainable product development, premium quality, reliability, productivity, and keeping the customer as the central focus of all activities continue as essential keys to Schoeller’s continued business success.

Source:

Schoeller Textil AG

Archroma: Whiteness Solutions for Laundry and Detergents in the U.S. (c) Archroma
20.05.2021

Archroma: Whiteness Solutions for Laundry and Detergents in the U.S.

Archroma announces a successful first year on the U.S. home care market with its whiteness solutions for laundry and detergents.

Archroma acquired in December 2019 the BASF's stilbene-based optical brightening agents (OBA) business for liquid and powder laundry detergent applications. The acquisition included the OBA technology, portfolio and manufacturing unit at Ankleshwar, India.

Since then, Archroma has mobilized its global experts, technologies and know-how, to design a holistic solutions portfolio for household, industrial & institutional cleaning (HI&I) aimed to support detergent manufacturers.

The portfolio now includes solutions for whiteness, coloration, stain removal, fabric softening, as well as sequestering agents and surfactants, which can be used in applications such as multipurpose cleaning powders, detergent powders, dish wash tablets and liquids, laundry liquids and fabric softeners, and hard surface cleaners.

Archroma announces a successful first year on the U.S. home care market with its whiteness solutions for laundry and detergents.

Archroma acquired in December 2019 the BASF's stilbene-based optical brightening agents (OBA) business for liquid and powder laundry detergent applications. The acquisition included the OBA technology, portfolio and manufacturing unit at Ankleshwar, India.

Since then, Archroma has mobilized its global experts, technologies and know-how, to design a holistic solutions portfolio for household, industrial & institutional cleaning (HI&I) aimed to support detergent manufacturers.

The portfolio now includes solutions for whiteness, coloration, stain removal, fabric softening, as well as sequestering agents and surfactants, which can be used in applications such as multipurpose cleaning powders, detergent powders, dish wash tablets and liquids, laundry liquids and fabric softeners, and hard surface cleaners.

Archroma used its experience working with manufacturers and brands in the textile industry to enter the US detergent markets for the very first time, and has been able to gain a significant position with most key laundry detergent manufacturers with its solutions for whiteness.

In particular, the company reports special interest from U.S. detergent brands and manufacturers for its Leucophor® 5BMGX, as this optical brightener allows them to achieve high levels of whiteness with a blueish undertone. The product is also highly soluble in water and stable in oxidative environment.

Source:

EMG

13.11.2020

The AVK presents its awards virtually for the first time

The AVK – Industrievereinigung Verstärkte Kunststoffe e.V. – has once again announced the winners of its prestigious Innovation Awards. Decided by an expert jury, the awards recognise and honour sustainable innovations in three categories: “Innovative Products/Applications”, “Innovative Processes” and “Research and Science”.

Overview of all the winners in the three categories:

Category “Innovative Products/Applications”
1st Place: “Directly-cooled electric motor with integral lightweight housing made of fibre reinforced polymers - DEmiL” – developed by the Fraunhofer Institute for Chemical Technology ICT, Pfinztal, Germany, in partnership with the Karlsruhe Institute of Technology and Sumitomo Bakelite Co., Ltd.*

2nd Place: “Intrinsically Reprocessable, Repairable and Recyclable (3R) thermoset composites for more Competitive and Sustainable Industries” – developed by cidetec, Donostia-San Sebastian, Spain*

The AVK – Industrievereinigung Verstärkte Kunststoffe e.V. – has once again announced the winners of its prestigious Innovation Awards. Decided by an expert jury, the awards recognise and honour sustainable innovations in three categories: “Innovative Products/Applications”, “Innovative Processes” and “Research and Science”.

Overview of all the winners in the three categories:

Category “Innovative Products/Applications”
1st Place: “Directly-cooled electric motor with integral lightweight housing made of fibre reinforced polymers - DEmiL” – developed by the Fraunhofer Institute for Chemical Technology ICT, Pfinztal, Germany, in partnership with the Karlsruhe Institute of Technology and Sumitomo Bakelite Co., Ltd.*

2nd Place: “Intrinsically Reprocessable, Repairable and Recyclable (3R) thermoset composites for more Competitive and Sustainable Industries” – developed by cidetec, Donostia-San Sebastian, Spain*

3rd Place: “Fireproof composite metal hybrid structure – LEO® fire protection sandwich with integrated Hyconnect steel-glass hybrid connector” – developed by SAERTEX GmbH & Co. KG and Hyconnect GmbH.*

Category “Innovative Processes”
1st Place: “Robotised Injection Moulding (ROBIN)” – developed by Robin, Dresden with the Institute for Lightweight Engineering and Polymer Technology at the TU Dresden*

2nd Place: “Omega stringer from the roll” – developed by the German Aerospace Center, Braunschweig*

3rd Place: “Hybrid die-casting – manufacturing of intrinsic CFRP-aluminium composite structures in aluminium high-pressure die-casting” – developed by Faserinstitut Bremen e. V. with Fraunhofer IFAM, Bremen*

Category “Research and Science”:
1st Place: “New high-temperature resistant UP resins and toughening agents” – developed by Münster University of Applied Sciences with BASF SE Global New Business Development, Leibniz Institute for Polymer Research e. V., Saertex multicom GmbH*

2nd Place: “Scientific basis for the industrial application of the thermoplastic resin transfer moulding (T-RTM) process” – developed by Fraunhofer Institute for Chemical Technology ICT, Pfinztal*

3rd Place: “The material- and energy-efficient production of turbine struts by the integrative combination of thermoset fibre reinforced materials” – developed by the Institute of Polymer Technology, University of Erlangen-Nuremberg with the German Aerospace Center, Gubesch Group, Schmidt WFT, Siebenwurst, Raschig.

Award ceremony on the Internet for the first time
For the first time, due to the Covid-19 pandemic, the award ceremony took place as an online event on 12 November 2020. Many of the award winners’ innovations will be presented again in this year’s AVK Innovation Award brochure. This will be available online: https://www.avk-tv.de/innovationaward.php

 

*Please see attached document for more information.

 

Source:

AVK – Industrievereinigung Verstärkte Kunststoffe e.V

BASF Acquires 3D Printing Service Provider Sculpteo © BASF
Clément Moreau, CEO and Co-Founder of Sculpteo
18.11.2019

BASF Acquires 3D Printing Service Provider Sculpteo

  • Acquisition drives market growth
  • Additional sales channel for BASF customers and partners
  • Access to new materials and technologies for customers of BASF and Sculpteo

To continue to expand its position as a leading service provider in the additive manufacturing sector, BASF New Business GmbH has formally agreed to acquire the online 3D printing service provider Sculpteo. The agreement was signed on November 14, 2019 and is expected to become effective in the next few weeks pending regulatory approval by the relevant authorities. The acquisition of the French 3D printing specialist based in Paris and San Francisco will enable BASF 3D Printing Solutions GmbH, a wholly-owned subsidiary of BASF New Business GmbH, to market and establish new industrial 3D printing materials more quickly. Sculpteo’s management team fully supports the acquisition and will remain in place to provide customers and partners with this expanded service spectrum.

  • Acquisition drives market growth
  • Additional sales channel for BASF customers and partners
  • Access to new materials and technologies for customers of BASF and Sculpteo

To continue to expand its position as a leading service provider in the additive manufacturing sector, BASF New Business GmbH has formally agreed to acquire the online 3D printing service provider Sculpteo. The agreement was signed on November 14, 2019 and is expected to become effective in the next few weeks pending regulatory approval by the relevant authorities. The acquisition of the French 3D printing specialist based in Paris and San Francisco will enable BASF 3D Printing Solutions GmbH, a wholly-owned subsidiary of BASF New Business GmbH, to market and establish new industrial 3D printing materials more quickly. Sculpteo’s management team fully supports the acquisition and will remain in place to provide customers and partners with this expanded service spectrum.

For around a decade already, Sculpteo has operated an online platform with integrated production for the manufacturing of prototypes, individual objects, and serial production components with a range of different additive manufacturing technologies. Customers in various industrial sectors around the world use the Sculpteo service to produce new components rapidly and reliably.

BASF will develop the existing Sculpteo 3D printing platform further into a global network. For customers and partners, BASF 3D Printing Solutions will thus be able to offer an additional channel for marketing their services and expanding their own customer bases.

"Through the acquisition of Sculpteo, we can provide customers and partners with even faster access to our innovative 3D printing solutions. In addition, our customers will benefit from an extended range of services”, explains Dr. Dietmar Bender, Managing Director BASF 3D Printing Solutions. “Together with Sculpteo, we are pursuing our goal of establishing additive manufacturing as a proven technology for industrial mass production", says Bender.

Combining the strengths of both companies will provide Sculpteo's existing customers with access to a more extensive portfolio of 3D printing materials. "We are excited to join the BASF team and thus benefit from BASF’s outstanding R&D to provide our customers with innovative solutions”, says Clément Moreau, CEO and Co-Founder of Sculpteo. Moreau will stay with Sculpteo as CEO.

Beyond this, the Sculpteo Design Studio and BASF’s technical experts will collaborate to be able to support customers in their 3D printing projects from the early planning phase right through to the final printed part. This will enable BASF to offer its customers end-to-end industrial 3D printing solutions.

Source:

BASF Marketing & Communications Manager

12.11.2019

BASF 3D Printing Solutions Exhibits Industrial Additive Manufacturing Solutions at Formnext 2019

  • Forward AM is the company’s new brand name
  • Innovative portfolio and services for all AM technologies
  • Outstanding scalable applications and industry partnerships
  • Presentation of 3D printed footwear

BASF 3D Printing Solutions (B3DPS) will be exhibiting at Formnext 2019, the leading sector show for additive-based manufacturing, with an expanded product range and a new brand presence. Sector specialists are warmly invited to meet B3DPS specialists in person from November 19 through 22 at Booth D21, Hall 12.1 at the Frankfurt Trade Fair. With the introduction of its new Forward AM corporate brand, B3DPS continues to pursue its goal of driving industrial scalability as the next phase of additive-based manufacturing. “Forward” stands for future-oriented, leading-edge materials and technology, while “AM” stands for “additive manufacturing”. The new arrow-symbol brand logo and “Innovating Additive Manufacturing” baseline emphasize the company’s dynamic approach to this exciting industrial manufacturing sector.

  • Forward AM is the company’s new brand name
  • Innovative portfolio and services for all AM technologies
  • Outstanding scalable applications and industry partnerships
  • Presentation of 3D printed footwear

BASF 3D Printing Solutions (B3DPS) will be exhibiting at Formnext 2019, the leading sector show for additive-based manufacturing, with an expanded product range and a new brand presence. Sector specialists are warmly invited to meet B3DPS specialists in person from November 19 through 22 at Booth D21, Hall 12.1 at the Frankfurt Trade Fair. With the introduction of its new Forward AM corporate brand, B3DPS continues to pursue its goal of driving industrial scalability as the next phase of additive-based manufacturing. “Forward” stands for future-oriented, leading-edge materials and technology, while “AM” stands for “additive manufacturing”. The new arrow-symbol brand logo and “Innovating Additive Manufacturing” baseline emphasize the company’s dynamic approach to this exciting industrial manufacturing sector.

Extensive product portfolio with expanded service offer
Under the Forward AM brand the company offers end-to-end materials and service solutions along the entire value chain – from an initial product idea right through to its serial manufacture. Forward AM has the most extensive materials portfolio in the industrial 3D printing market today, encompassing powder bed fusion, advanced plastic and metal filaments, and the latest photopolymers.

Source:

BASF 3D Printing Solutions GmbH

(c) BASF 3D Printing Solutions GmbH
07.10.2019

BASF 3D Printing Solutions Presented Cutting-Edge Manufacturing Solutions at K 2019

  • Comprehensive 3D printing expertise in the automotive, aerospace, consumer goods and medical application sectors
  • Hands-on application presentation with a leading RV and trailer manufacturer
  • Content-rich Live Talks with industry-leading business partners
  • Live demonstration of pigmented plastic filaments with BASF Colors & Effects

BASF 3D Printing Solutions (B3DPS) exhibited for the second time at K 2019 in Düsseldorf, Germany. At the world’s biggest trade show for plastics and rubber industry, B3DPS welcomed visitors from October 16 through 23 at the BASF SE stand C21/D21 in Hall 5 and presented its extensive portfolio of 3D printing materials and service solutions aiming at enabling industrial additive manufacturing at scale. What’s more, the company’s 3D printing experts did offer insights into the latest technological innovations and application developments in the “competencies” section.

  • Comprehensive 3D printing expertise in the automotive, aerospace, consumer goods and medical application sectors
  • Hands-on application presentation with a leading RV and trailer manufacturer
  • Content-rich Live Talks with industry-leading business partners
  • Live demonstration of pigmented plastic filaments with BASF Colors & Effects

BASF 3D Printing Solutions (B3DPS) exhibited for the second time at K 2019 in Düsseldorf, Germany. At the world’s biggest trade show for plastics and rubber industry, B3DPS welcomed visitors from October 16 through 23 at the BASF SE stand C21/D21 in Hall 5 and presented its extensive portfolio of 3D printing materials and service solutions aiming at enabling industrial additive manufacturing at scale. What’s more, the company’s 3D printing experts did offer insights into the latest technological innovations and application developments in the “competencies” section.

Customized 3D printing highly attractive to RV and trailer market
The Concept Caravan at the BASF stand gave visitors hands-on experience of the impressive spectrum of applications offered by B3DPS. Alongside complex samples of printed modular construction elements, over one hundred individual parts have been 3D-printed using advanced photopolymer, filament and powder-based ready-to-print material formulations. The RV and trailer market is exceptionally attractive as it can greatly benefit from unique advantages offered by additive-based manufacturing, namely the high customizability of parts with complex geometries as well as the rapid availability of production parts without incurring tool costs. The very diverse material characteristics of the construction elements meet the production requirements for both vehicle exteriors and interior fittings. In addition, the final coating of manufactured parts plays a decisive role in many application areas, and this is also covered by the comprehensive BASF technology portfolio.

Source:

BASF 3D Printing Solutions GmbH

23.09.2019

Tape inserts offer big potential for injection molding parts

Market and technology analysis confirms big potential for tape inserts in the injection molding process. Following the finalization of a major consortial project led by the Aachen Center for Integrative Lightweight Production (AZL) and the Institute for Plastics Processing at RWTH Aachen University (IKV), the result is clear: tape inserts offer enormous potential for injection molding parts. For suitable components, product costs and component properties can be positively influenced.

In cooperation with 20 industrial partners, the two renowned Aachen research institutes AZL and IKV carried out a detailed analysis of tape inserts in injection molded components over a period of eight months. The tapes, which are a few tenths of a millimeter thick, are continuous fibers, typically made of glass or carbon, completely impregnated and embedded in a thermoplastic matrix. The tapes can be precisely aligned to the loads in a component and are used primarily in high-performance applications with the aim of weight reduction. The aim of the conducted analysis was the identification of potential applications and the estimation of a wider range of applications.

Market and technology analysis confirms big potential for tape inserts in the injection molding process. Following the finalization of a major consortial project led by the Aachen Center for Integrative Lightweight Production (AZL) and the Institute for Plastics Processing at RWTH Aachen University (IKV), the result is clear: tape inserts offer enormous potential for injection molding parts. For suitable components, product costs and component properties can be positively influenced.

In cooperation with 20 industrial partners, the two renowned Aachen research institutes AZL and IKV carried out a detailed analysis of tape inserts in injection molded components over a period of eight months. The tapes, which are a few tenths of a millimeter thick, are continuous fibers, typically made of glass or carbon, completely impregnated and embedded in a thermoplastic matrix. The tapes can be precisely aligned to the loads in a component and are used primarily in high-performance applications with the aim of weight reduction. The aim of the conducted analysis was the identification of potential applications and the estimation of a wider range of applications.

The project was divided into several phases: Phase I was used to identify the current status. In 20 interviews with representative companies of the injection molding industry, the researchers gathered why tape inserts have rarely been taken into account so far, when defining the material concepts to be analyzed. The lack of information about the material class, the procedure and tools for the development process and the necessary production technologies were cited as major challenges. This is where the consortium will take action and provide comprehensive information during the “Technology Information Day” on the extensively prepared state of the art and the high degree of maturity of the supply chain. Based on the status quo, they developed a methodology for analyzing the technological and economic potential of tape inserts in injection molding applications.

Both the previous results and the planned follow-up projects are the subject of the “Technology Information Day" at K 2019, to which the companies involved in the study, the AZL and IKV, invite all companies along the value chain, from raw material manufacturers to injection molders to OEMs. (Date: 18th October 2019, 10:00 am to 1:30 pm, Trade Fair Düsseldorf CCD South, Room 002).

The consortium, amongst others consisting of Asahi Kasei Europe GmbH, BASF SE, Borealis AG, BÜFA Thermoplastic Composites GmbH & Co. KG, ENGEL AUSTRIA GmbH, Huesker Synthetic GmbH, LG Hausys R&D Center, Mitsui Chemicals, Nippon Electric Glass, Polyscope Polymers BV, POLYTEC GROUP, Simcon kunststofftechnische Software GmbH, SABIC and Toray International Europe GmbH, is inviting to the “Technology Information Day” at K 2019. The goal is to inform about the technology and to identify topics for future collaboration.

Source:

AZL Aachen GmbH

BASF Photo: BASF
23.07.2019

BASF Ultrafuse 316L – Metal filament for industrial 3D printing

  • Simple and cost-effective printing of stainless steel metal parts
  • Reduces dramatically the potential hazard of handling fine metallic powders when compared to SLM or Binder Jetting
  • Specially designed for open FFF 3D printers
  • BASF begins the commercialization of Ultrafuse 316L with iGo3D, Ultimaker, and MatterHackers

With Ultrafuse 316L, BASF 3D Printing Solutions launches an innovative metal- polymer composite for Fused Filament Fabrication (FFF) into the market. It enables the safe, simple, and cost-efficient production of fully metal parts for prototypes, metal tooling, and functional metal parts in the simplest 3D printing process. After the subsequent industry-standard debinding and sintering, the final 3D printed part is 316L stainless steel.

  • Simple and cost-effective printing of stainless steel metal parts
  • Reduces dramatically the potential hazard of handling fine metallic powders when compared to SLM or Binder Jetting
  • Specially designed for open FFF 3D printers
  • BASF begins the commercialization of Ultrafuse 316L with iGo3D, Ultimaker, and MatterHackers

With Ultrafuse 316L, BASF 3D Printing Solutions launches an innovative metal- polymer composite for Fused Filament Fabrication (FFF) into the market. It enables the safe, simple, and cost-efficient production of fully metal parts for prototypes, metal tooling, and functional metal parts in the simplest 3D printing process. After the subsequent industry-standard debinding and sintering, the final 3D printed part is 316L stainless steel.

More information:
BASF 3D Printing Solutions
Source:

BASF 3D Printing Solutions GmbH

20.05.2019

BASF and Paxis collaborate in materials for3D printing technology

  • BASF’s photopolymer materials for advanced manufacturing applica-tions qualify for early development access in new WAV™ technology
  • BASF’s Ultracur3D ST 45 reactive urethane photopolymer fulfills the re-quirements of functional applications

BASF 3D Printing Solutions is to provide innovative additive manufacturing materi-als to Paxis LLC for their new WAV™ technology. This is currently in development and is designed to meet the needs of additive manufacturing users, advanced manufacturing as well as traditional manufacturing markets. The WAV™ (Wave Applied Voxel) process was created with the end-user firmly in mind in an effort to solve trapped volume issues of current liquid resin-based technologies.

  • BASF’s photopolymer materials for advanced manufacturing applica-tions qualify for early development access in new WAV™ technology
  • BASF’s Ultracur3D ST 45 reactive urethane photopolymer fulfills the re-quirements of functional applications

BASF 3D Printing Solutions is to provide innovative additive manufacturing materi-als to Paxis LLC for their new WAV™ technology. This is currently in development and is designed to meet the needs of additive manufacturing users, advanced manufacturing as well as traditional manufacturing markets. The WAV™ (Wave Applied Voxel) process was created with the end-user firmly in mind in an effort to solve trapped volume issues of current liquid resin-based technologies.

"The combination of BASF materials and Paxis’s system will revolutionize the way end-applications are designed, manufactured and integrated into production", states Arnaud Guedou, Business Director Photopolymer Solutions, BASF 3D Printing Solutions. "With the new WAV™ technology, Paxis extends the application possibilities of additive manufacturing to a much broader scope than current technologies allow. What’s more, equipment and processes can be adapted to requirements that were previously unimaginable in additive manufacturing. BASF’s innovative photopolymer materials are a perfect match for Paxis's WAV™ technology."

BASF’s Ultracur3D ST 45 reactive urethane photopolymer for tough applications has been designed to fulfill the requirements of functional applications for high accuracy and mechanical strength, where existing 3D printing materials often reach their limitations. Ultracur3D ST 45 can be used to produce high performance functional parts by using a wide variety of equipment, such as stereolithography (SLA), digital light processing (DLP), or Liquid Crystal Display (LCD).

Source:

BASF 3D Printing Solutions GmbH

(c) BASF
14.11.2018

BASF, Materialise and Essentium join forces to advance industrial additive manufacturing

  • Three companies with complementary strengths team up
  • BASF leads a Series A investment round with Materialise as one of the co-investors

BASF Venture Capital is leading the Series A investment round in Essentium, Inc., an innovative developer of disruptive, industrial additive manufacturing solutions headquartered in College Station, Texas. Materialise is one of the co-investors in the Series A investment round in Essentium, Inc. BASF and Essentium have been working together on advanced fused filament fabrication (FFF) solutions using Essentium’s proprietary FlashFuseTM technology for high mechanical strength in the build direction for extrusion printed parts. The two companies are now extending their strategic partnership to establish a consistent global materials supply chain supportive of Essentium’s new High Speed Extrusion (HSE) additive manufacturing platform. Essentium and BASF welcome Materialise to enter this strategic partnership to develop 3D printing software for the Essentium technology.

  • Three companies with complementary strengths team up
  • BASF leads a Series A investment round with Materialise as one of the co-investors

BASF Venture Capital is leading the Series A investment round in Essentium, Inc., an innovative developer of disruptive, industrial additive manufacturing solutions headquartered in College Station, Texas. Materialise is one of the co-investors in the Series A investment round in Essentium, Inc. BASF and Essentium have been working together on advanced fused filament fabrication (FFF) solutions using Essentium’s proprietary FlashFuseTM technology for high mechanical strength in the build direction for extrusion printed parts. The two companies are now extending their strategic partnership to establish a consistent global materials supply chain supportive of Essentium’s new High Speed Extrusion (HSE) additive manufacturing platform. Essentium and BASF welcome Materialise to enter this strategic partnership to develop 3D printing software for the Essentium technology. This will allow users to take advantage of the speed of the HSE technology while having immediate access to the full Materialise software capabilities for professional 3D printing. The three companies combine their complementary strengths to jointly advance 3D printing technology and customer value to enable industrial additive manufacturing.

BASF is contributing comprehensive material know-how, a broad product portfolio, and its global network to the partnership. Materialise adds nearly three decades of expertise in the development of innovative 3D printing software solutions. Essentium is addressing additive manufacturing at scale by developing an industrial additive platform truly built for the production floor, providing its FlashFuseTM electric welding technology, and engineering-grade, multi-layer filaments for demanding applications. Together, the three partners intend to innovate solutions with advanced combination of hardware, software and materials to unleash the potential of Essentium’s unique high-speed-printer technology, coordinating their strengths to the best advantage.

“Our joint investment strengthens our co-operations with both Essentium and Materialise and accelerates the innovation potential of this powerful team to the benefit of BASF’s customers,” said Markus Solibieda, Managing Director of BASF Venture Capital.

“With this strategic investment, Essentium and BASF are focusing on improved supply chain performance, material consistency and accessibility. Essentium is also delighted to begin a new partnership with Materialise as the three companies focus efforts toward a new era for smart solutions in the global additive extrusion space. Together, we believe manufacturers everywhere will be able to accelerate production due to increased access to our new solutions, bolstered by a holistic, customer-centric approach,” comments Dr. Blake Teipel, CEO of Essentium, Inc.

“Materialise, Essentium and BASF share a vision for growth in the 3D printing industry that builds on the creation of meaningful applications in an open and vibrant ecosystem”, said Bart Van der Schueren, CTO of Materialise. “This partnership helps to promote a more open market model, which will fuel the adoption of 3D printing in the industrial field by offering users more control, more choice in materials and ultimately lower cost and higher volumes.”

BASF and Materialise are joined by a syndicate of private venture investors. Moving forward, BASF, Materialise, and Essentium will jointly drive the transition from 3D printing to scalable additive manufacturing.

Source:

BASF

(c) BASF
14.11.2018

BASF, Materialise und Essentium arbeiten gemeinsam an neuen Lösungen für die industrielle additive Fertigung

  • Drei Partner mit komplementären Stärken bauen ihre Zusammenarbeit aus
  • BASF führt Series-A-Investmentrunde mit Materialise als einem der Co-Investoren an

BASF Venture Capital führt die Series-A-Investmentrunde in Essentium, Inc., einem innovativen Entwickler von disruptiven Lösungen für die industrielle additive Fertigung mit Sitz in College Station, Texas an. Materialise ist einer der Co-Investoren in dieser Series-A-Runde. BASF und Essentium arbeiten bereits gemeinsam an der Weiterentwicklung der Fused Filament Fabrication Technologie (FFF) auf Basis der Essentium FlashFuseTM Technologie. Unter Verwendung von funktionalisierten Co-Extrusions-Filamenten wird mit dieser Technologie eine hohe mechanische Stabilität auch zwischen den Materialschichten ermöglicht. Beide Unternehmen erweitern nun ihre strategische Partnerschaft, um interessierten Kunden global einheitlich den Zugang zu Essentiums neuer High-Speed Extrusion (HSE) Technologieplattform zu ermöglichen. Neben Essentium und BASF wird Materialise Teil der Partnerschaft, mit dem Ziel, 3D-Druck-Software für die Essentium-Technologie zu entwickeln.

  • Drei Partner mit komplementären Stärken bauen ihre Zusammenarbeit aus
  • BASF führt Series-A-Investmentrunde mit Materialise als einem der Co-Investoren an

BASF Venture Capital führt die Series-A-Investmentrunde in Essentium, Inc., einem innovativen Entwickler von disruptiven Lösungen für die industrielle additive Fertigung mit Sitz in College Station, Texas an. Materialise ist einer der Co-Investoren in dieser Series-A-Runde. BASF und Essentium arbeiten bereits gemeinsam an der Weiterentwicklung der Fused Filament Fabrication Technologie (FFF) auf Basis der Essentium FlashFuseTM Technologie. Unter Verwendung von funktionalisierten Co-Extrusions-Filamenten wird mit dieser Technologie eine hohe mechanische Stabilität auch zwischen den Materialschichten ermöglicht. Beide Unternehmen erweitern nun ihre strategische Partnerschaft, um interessierten Kunden global einheitlich den Zugang zu Essentiums neuer High-Speed Extrusion (HSE) Technologieplattform zu ermöglichen. Neben Essentium und BASF wird Materialise Teil der Partnerschaft, mit dem Ziel, 3D-Druck-Software für die Essentium-Technologie zu entwickeln. Dadurch profitieren die Nutzer in vollem Umfang von der Geschwindigkeit der HSE-Technologie. Gleichzeitig erhalten sie Zugriff auf die Softwaremöglichkeiten von Materialise. Die drei Unternehmen bringen ihre komplementären Stärken ein, um gemeinsam die 3D-Druck-Technologie und deren Nutzen für industrielle Kunden zu verbessern und somit die Entwicklung der additiven Fertigung voranzutreiben.

BASF bringt ein umfassendes Material-Know-how, ein breites Produktportfolio und sein globales Netzwerk in die Partnerschaft ein. Materialise zeichnet sich durch eine fast 30-jährige Expertise in der Entwicklung von innovativen Software-Lösungen für den 3D-Druck aus. Essentium entwickelt eine Technologie-Plattform für die industrielle additive Fertigung. Basis sind Innovationen im Bereich High-Speed Extrusion (HSE), die FlashFuseTM Technologie, sowie Hochleistungsfilamente für anspruchsvolle Kundenanwendungen. Gemeinsam wollen die Partner innovative Systemlösungen mit einer abgestimmten Kombination aus Hardware, Software und Materialien entwickeln, um das Potenzial von Essentiums einzigartiger Technologie optimal ausschöpfen zu können.

„Mit dem gemeinsamen Investment stärken wir unsere Zusammenarbeit mit Essentium und Materialise sowie das Innovationspotenzial dieses schlagkräftigen Teams zugunsten der BASF-Kunden“, sagt Markus Solibieda, Geschäftsführer der BASF Venture Capital.

„Mit diesem strategischen Investment fokussieren sich Essentium und BASF auf eine Verbesserung der Supply Chain, der Materialbeständigkeit und des Materialzugangs. Wir freuen uns ebenso, eine neue Partnerschaft mit Materialise einzugehen. Alle drei Unternehmen fokussieren ihre globalen Bestrebungen smarte Lösungen auf dem Gebiet der additiven Fertigung herauszubringen. Gemeinsam sind wir davon überzeugt, dass Hersteller aus aller Welt mit dem verbreiterten Zugang zu unseren neuen Lösungen sowie gestützt durch den kunden-zentrierten Ansatz, nun schneller und kostengünstiger produzieren können“, ergänzt Dr. Blake Teipel (CEO Essentium Inc.).

“Materialise, Essentium und BASF haben eine gemeinsame Vision des Wachstums in der 3D-Druck-Branche, die auf der Schaffung von bedeutenden Anwendungen in einem offenen und dynamischen Ökosystem basiert”, sagt Bart Van der Schueren, CTO von Materialise. “Diese Partnerschaft hilft, ein offeneres Marktmodell voranzubringen, das die Übernahme von 3D-Druck-Technologien in industriellen Anwendungen fördert, indem es Nutzern mehr Kontrolle, eine größere Auswahl an Materialien und schließlich niedrigere Kosten und somit den Zugang zu größeren Stückzahlen in der additiven Fertigung bietet.“

Neben BASF und Materialise beteiligt sich auch ein Konsortium von Venture Capital Investoren an Essentium. BASF, Materialise und Essentium wollen vorangehen, um gemeinsam den Wandel vom 3D-Druck zur skalierbaren additiven Fertigung zu gestalten.

Source:

BASF