From the Sector

EDANA’s Innovation Forum 2025, held on 11–12 June in Station F, Paris, brought together a vibrant cross-section of industry leaders, researchers, startups and innovation experts to explore the dynamic evolution of the nonwovens sector. With a rich two-day agenda that combined high-level keynote addresses, thematic sessions, research showcases and networking events, the Forum served as a hub for ideation, collaboration and inspiration around the sector’s most urgent challenges and exciting opportunities. 
 
“Innovation is a key factor to stay competitive — but more than that, it’s the foundation for resilience and long-term relevance. By embedding sustainability, digitalization and collaboration into the core of our innovation culture, we’re not just keeping pace with change — we’re shaping the future of our industry.” said EDANA General Manager Murat Dogru in his opening address. 
 
Speakers explored how textile waste can become high-value products, how fibrelevel modelling replaces costly prototyping, and how AI enables more autonomous and sustainable manufacturing. “Nonwovens are robust and can tolerate stress. This gives an opportunity in the recycling textile to tackle the textile tsunami.” - Maria Ström, CEO of The Loop Factory. 
 
The Forum also welcomed nature-powered innovations set to transform the fibre landscape. “What if we made fibres from agricultural waste? Natural fibres are extraordinary, and we wouldn’t even have to use the leaves that are grown, but the ones already on the ground and that are now considered waste.” - Dr. Carmen Hijosa, Founder & Creative Director of Ananas Anam. 
 
The afternoon turned its spotlight on research institutes from across Europe, examining how their strategic priorities align with industry needs. “It is crucial that people in the nonwovens industry understand what’s going on on the other side of the fence and to understand what R&D people are doing”, said Matthew Tipper, CEO of Nonwovens Innovation & Research Institute (NIRI). “We need collaboration between the real needs of the industry and research institutes.” 
 
Towards the end of the first day, the EDANA Innovation Forum featured a workshop on capturing serendipity. “Not all progress is planned”, said Dieter Eichinger, CEO & Founder of Eichinger. “Some of the most transformative ideas are born from surprises, and we need to make space for it to imagine the imaginable”. 
 
The first day ended with a cocktail dinner aboard the Excellence, gliding through the heart of Paris on the River Seine, admiring the beauty of the City of Light and its stunning views of the Eiffel Tower. 
 
Day two began with a provocative and practical keynote on AI as a creative partner in product development. “AI doesn’t replace creativity,” said Oliver Breucker, CoCEO & AI Consultant at Roover Consulting. “It amplifies it. It clears space for us to think bigger, iterate faster, and design better — with the customer always at the centre.” 
 
Moreover, sustainable innovation is no longer confined to early-stage R&D. From fibre-based packaging to carbon-zero superabsorbents, speakers showcased products ready to hit the market, each with compelling environmental and commercial benefits. “It’s not about choosing between performance and sustainability anymore,” said Alexandros Skouras, Director of Hygiene Sector at Paptic. “The next generation of materials offers both.” 
 
The forum also invited Walter Johnsen, Venture Science Associate at Marble Studio, who offered a strategic lens on how deep-tech entrepreneurship can fast-track climate progress. In addition, four startups took the stage to showcase how they’re transforming diapers, textiles, fashion and chemical processes. “Innovation is not about making things slightly better,” said Miki Agrawal of Hiro Technologies. “It’s about asking: what if we start completely differently and solve the root problem instead of patching the old one?” 
 
To end the second day, Maxime Guillaud, CEO of INSKIP, mapped out how startups and ecosystems are evolving — and what the nonwovens industry can learn from other sectors. “Innovation doesn’t just come from technology — it comes from how we organise people and capital around ideas,” said Maxime. “That’s where ecosystems matter.” The event concluded with a guided visit to Station F, the world’s largest startup campus, reinforcing the importance of ecosystems in scaling transformative ideas. 
 
EDANA extended its heartfelt thanks to all speakers, moderators, partners and participants whose energy and insight made the Forum such a success. The connections made in Paris will continue to drive meaningful progress in the months and years ahead! 

The Boards of Directors of INDA and EDANA have officially approved the formation of the Global Nonwoven Alliance (GNA) and have concurrently agreed to become its founding members. Both Boards have also approved a motion authorizing each organization to appoint six representatives from each founding organization – current chair and 5 additional representatives. 

This move marks a major milestone in the collaborative vision outlined in the organizations’ jointly signed Letter of Intent from September 2024. The Board votes follow extensive planning and consultation and includes the recommendation to formally establish GNA as a non-profit association under the laws of the United States. 

By aligning strategic resources and deepening collaboration, the GNA will provide a unified and coordinated approach to the key opportunities and challenges facing the global nonwovens industry. The Alliance is designed to accelerate innovation, improve operational efficiency, expand international reach, and foster long-term industry growth—all while strengthening the services and support delivered to members at both regional and global levels. 

Under the GNA framework, INDA and EDANA will continue to operate as independent legal entities, maintaining their regional focus and advocacy efforts. As founding members, however, both organizations will participate in aligning leadership, staffing, and programmatic initiatives to advance shared objectives and cross-border priorities. 

In the immediate term, INDA and EDANA will focus on laying a strong foundation for GNA, including establishing the organization and solidifying its governance structure. Looking ahead, Allied Membership is expected to be open to any not-for-profit trade, industry, or professional association whose mission aligns with that of the founding members—offering an inclusive platform for broader collaboration across the global nonwovens value chain.

“The formation of GNA is a milestone for our industry. By working together across regions, we can accelerate innovation, speak with a stronger voice globally, and deliver even greater value to our members,” said Tony Fragnito, President of INDA. “This is not a merger—it’s a strategic alliance built on mutual respect and a shared commitment to the future of nonwovens.” 

“With the creation of GNA, we are positioning the nonwovens industry to meet global challenges with greater unity and impact,” said Murat Dogru, General Manager of EDANA. “This collaborative structure allows us to scale our efforts, strengthen our influence, and pursue solutions that benefit our members worldwide.” 

GNA will be governed by a Board composed of six members from each founding organization –five appointed representatives plus the current Chair–, ensuring balanced representation and a regional perspective. This governance structure will promote transparency, long-term strategic alignment, and organizational stability while guiding shared policies, priorities, and programs.

The European Capital of Culture 2025, Chemnitz, opened its doors to textile designers, textile artists and experts from the fields of fashion, art and textiles: the Tour de LOOP on 26 and 27 May 2025 took participants on an exclusive professional tour of one of Europe's most traditional and innovative textile regions. 19 visitors from Europe explored Chemnitz and its textile region. They came from the Netherlands, Austria, the Czech Republic, Great Britain and Germany.

Once known as the ‘Saxon Manchester’, Chemnitz today inspires with sustainable textile production, digital textile design and artistic diversity. The two-day trip impressively combined the past, present and future of local textile production.

Exclusive guided tours focussing on textile history and textile technologies
To kick things off, a city centre tour including a playful exploration of the European Capital of Culture 2025 broke the ice. Special stops on the tour included the Esche LAB in Limbach-Oberfrohna on 26 May 2025 - a workshop for creative textile work with a focus on knitting, embroidery and ready-to-wear clothing - and the Sächsisches Textilforschungsinstitut e.V. (STFI) on 27 May 2025, which offers extensive opportunities for artistic textile projects and research collaborations.

The programme at the Esche Museum included a demonstration of historical knitting machines, a tour of the Fabric Visions special exhibition and a workshop in the ESCHE Lab. The ESCHE Lab was opened at the beginning of the year and has since been available as a makerspace for creative projects. At the STFI, visitors were given an insight into the technological possibilities of the Textile Lab Professional. In addition to surface technologies such as knitting, weaving, warp knitting, functionalisation and textile recycling, the tour led to the textile factory of the future, where research is being conducted into digitalisation in textile production. The Textile Lab Professional is a cooperation between the STFI and the ESCHE Lab and is open to creative minds with its expertise and diverse plant technology. The trip concluded with a workshop in the art collections, which focussed on the Schneeberger Geflecht exhibition.

European network
The workshops and live demonstrations provided insights into innovative techniques and offered starting points for artistic approaches. Through expert discussions and an open networking evening, the Tour de LOOP created an exchange with creatives, designers and scientists from Chemnitz and Europe. 

Tour de LOOP is an offer from the Makers, Business & Arts project of the European Capital of Culture Chemnitz 2025, the Esche Museum and the Sächsisches Textilforschungsinstitut e.V. (STFI).

INDA, the Association of the Nonwoven Fabrics Industry, has published the full conference program for the World of Wipes® (WOW) International Conference, taking place July 21–24, 2025, at the Hilton Columbus Downtown in Columbus, Ohio.

This year’s theme, “Wipe to Win: Innovating for a Sustainable and Profitable Future,” brings together industry leaders to address pressing challenges and opportunities across the wipes value chain. Program topics will include U.S. manufacturing threats, tariff and regulatory impacts, fiber sustainability, consumer perceptions, fragrance trends, slitting advancements, plastic-free wipe innovations, sports hygiene, and flushability.

Conference Sessions Include:

• Panel Discussion: Navigating the Headwinds: U.S. Manufacturing Threats & Challenges in 2025
• From Forest to Flush: Sustainability and Responsibility in Fiber and Wipes
• Trends, Tushes & TikToks: The Rise of the Modern Wipe
• Sniff, Save, Slice: Rethinking Wipes from Fragrance to Finish
• No Plastic, No Problem: The Next Generation of Eco-Wise Wipes
• Swipe Right: The New Faces of Specialty Wipes
• Panel Discussion: The Great Regulatory and Tariff Pow-WOW

Conference Highlights Include:

• WIPES Academy – July 21-22
  Led by Heidi Beatty, CEO of Crown Abbey, this 12-session course offers comprehensive training from concept to commercialization, including selection of fabrics, formulation design, and packaging considerations.
• Tabletop Exhibits & Lightning Talks – July 22-23
  Explore the latest innovations from leading companies. Exhibitors will deliver five-minute product spotlights, followed by networking at the evening receptions.
• Lunch Arounds – July 22-23
  Engage with peers, entrepreneurs, and industry thought leaders in small-group lunch discussions designed to foster collaboration and connections.
• Pre-Conference Webinars
  More details will be released soon.
• World of Wipes Innovation Award® – July 22 and 24
  Recognizing breakthrough innovations that utilize nonwoven technologies to enhance functionality and broaden application. Finalists will present on July 22; the winner will be announced on July 24.

Heimtextil, the leading international trade fair for home and contract textiles and textile design, is strategically expanding the Smart Bedding segment. A new exhibitor area will be created for the January 2026 edition: Sleep & Meet. This new format will take up around a quarter of Hall 4.0. Numerous well-known brands from the mattress sector have already registered to take part. With a clear structure and a high-quality environment, Sleep & Meet offers bedding retailers, hospitality and volume buyers direct access to relevant companies and industry participants, new product range perspectives and valuable business contacts.

Numerous strong German brands from the mattress sector will be exhibiting at Heimtextil 2026. Well-known companies such as Auping Germany, Bettwaren Stendebach, Erich Werkmeister, ergomed, Femira, Rummel and Schwarzwald Schlafsysteme are celebrating their premiere at Heimtextil 2026 and have already registered. The EuroComfort Group with Badenia, Brinkhaus, Lück and fan frankenstolz are significantly expanding their space at Heimtextil 2026.

Trade association Matratzen-Industrie e.V. will be present again
The trade association Matratzen-Industrie is also sending out a strong signal: the association will once again have its own stand at Heimtextil 2026. ‘Heimtextil offers the ideal platform to showcase the innovative strength and diversity of German mattress manufacturers internationally’, explains Martin Auerbach, Managing Director of the trade association Matratzen-Industrie.

Fibre and fabric production technologies – especially in the area of composite reinforcements – have played an as-yet largely unheralded role in the development of the UK’s Formula One industry, but the British Textile Machinery Association (BTMA) aims to change that.

Motorsport Valley
“If there’s one thing the UK does well, it’s Formula One, with seven of the ten F1 teams located within just an hour of each other in the midlands region known as Motorsport Valley,” explains BTMA CEO Jason Kent. “They are all linked to a national network of around 4,500 companies involved in a motorsport and high-performance engineering industry worth around £9 billion annually and employing 40,000 people. This network draws on the services of a significant number of our member companies.”

“With the exception of the engine, virtually every part of a Formula One racing car now starts from a textile, including the bodywork, the tyres and many of the latest fuel systems,” says Richard Kirkbright, project manager at Leeds-based Roaches International. “This has influenced developments in the broader automotive sector, in addition to the aerospace industry.”

Show cars and memorabilia
While best known as the developer of textile testing systems, Roaches has over the years also supplied advanced autoclaves to the UK’s composites industry, including a recent delivery to Northampton-based Memento Exclusives, a specialist in the production of show cars working directly with F1 and its leading teams.

Each major F1 team sponsor is supplied with one or two show cars for use at exhibitions and a wide range of other promotional activities arranged around the racing event calendar. These cars have no engine and their bodies may be made of fewer carbon fibre plies, but they are otherwise identical to the latest cars being raced by the F1 teams.

Memento Exclusives has its own in-house carbon fibre parts manufacturing facility and the integration of the Roaches autoclave has significantly expanded its capabilities in show car production.

Master bakers
“Composite materials undergo a metamorphosis in the autoclave which subjects them to both mechanical and chemical processes,” explains Richard Kirkbright. “Trapped air and volatiles are expelled and plies are consolidated under precise pressure. Heat cycles are then introduced, curing the resin systems and yielding flawlessly crafted components. Autoclave specialists are a little like master bakers, knowing exactly how to treat their ingredients at every stage of the process, to achieve the desired final product.”

“The Roaches autoclave now enables us to cure large components with full control and achieve a swift turnover of parts while ensuring the highest quality finish,” adds Terry Wasyliw, Head of Build for Memento Exclusives.

McLaren’s influence
Woking, UK-headquartered McLaren was the very first F1 team to introduce a car chassis manufactured entirely from carbon fibre composites back in 1981, setting the ball rolling for the creation of a completely new and global supply chain.

McLaren has this year unveiled a world-first in supercar engineering – aerospace-derived Automated Rapid Tape (ART) carbon fibre, developed at the dedicated McLaren Composites Technology Centre (MCTC) facility in Sheffield. This is being employed to create the active front wings of the W1 hypercar which has a starting price of $2.1 million.

A rear floor component was also developed for McLaren as part of the recently-completed £39.6 million ASCEND programme involving a range of UK partners, including BTMA member Cygnet Texkimp.

Handling, converting and decarbonisation
A wide range of handling and converting machines are supplied to the composites industry by Cygnet Texkimp, including bespoke creels, prepreg, coating, slitting and filament winding machines.

Its technologies are employed in the construction of composite components for aerospace and automotive, as well as in the production of tyre cord and more recently in the advanced construction of hydrogen storage vessels which are largely viewed as the future of F1 propulsion, along with advanced batteries for electric vehicles.

Cygnet Texkimp has been involved in the F1 supply chain for over 20 years and most carbon fibre used in the industry has been processed on one of its VHD creels. The company is also the largest independent manufacturer of prepreg machines in the world and is currently leading the design and build of the UK’s first carbon fibre research lines for a project led by NCC (National Composites Centre) to accelerate the development of more sustainable carbon fibres.

In addition, Cygnet is licensed to design and build the DEECOM® composite recycling system developed by new BTMA member Longworth Sustainable Recycling Technologies, the first of which was recently commissioned by the Henry Royce Institute in Manchester. DEECOM® is a zero emission, low carbon pressolysis solution using pressure and steam to reclaim pristine condition fibres and resin polymers frocm production waste and end of life composites.

“Decarbonisation is a major priority for manufacturers globally,” says Cygnet CEO Luke Vardy. “At Cygnet Texkimp, we’re developing the capability to process technical fibres in ways that enable lightweighting, hydrogen power and electrification, reduce waste and revolutionise the end-of-life management of composite materials and parts. In collaboration with our industry partners, we’re bringing to market some of the most innovative new fibre processing technologies ever developed to deliver real-world benefits that support the sustainability agenda.”

Prepregging
Another new BTMA member, Emerson & Renwick (E+R), a specialist in print, forming, vacuum and coating technologies, also supplies technology for the production of carbon fibre prepregs, which are integrated rolls of fabrics and resins.

Its most recent 1.7-metre-wide line supplied to a customer in Italy operates at speeds of 40+ metres per minute for web coatings or prepreg fibre and resin consolidation, or a combination of both processes. It is distinguished by an ultra precise three-roll reverse roll coater for the processing of high viscosity thermo-activated resins and enables the automatic changeover of sensitive woven fabric materials at zero tension, with three high precision calendaring nips with hot/cool plates. Multiple unwind and rewind systems for intermediate lamination steps include side loading and reliable lap splicing and zero speed splicing with a web accumulator for the main product rewind.
 
 E+R has also been part of a consortium working on the development of lithium-sulphur (Li-S) batteries within the £540 million UK Faraday Battery Challenge. Once commercially viable, Li-S batteries promise to provide relatively high energy density at low cost for sustainable electric vehicles of the future – inevitably starting with F1.

Strong links
“In addition to our powerful base of textile testing and control companies, many other BTMA members are working on further F1 and advanced composite projects,” says Jason Kent in conclusion. “We are also forging strong links with the UK’s key research hubs such as Sheffield University’s Advanced Manufacturing Research Centre, the Northwest Composites Centre in Manchester, the National Centre for Motorsport Engineering in Bolton and the National Composites Centre in Bristol.

“The BTMA recently became an associate member of Composites UK too, because this sector is the crucible of innovation for tomorrow’s textiles.”

Organized by İTKİB FuarcılıkA.Ş. in collaboration with the Istanbul Textile Exporters Association (İTHİB), Texhibition Istanbul 2025 once again proved itself as one of the leading international trade fairs for fabrics, yarns, and textile accessories. From March 5–7, 2025, the Istanbul Expo Center transformed into a dynamic meeting point for textile professionals worldwide presenting for fabrics, yarns, and textile accessories. More than 500 exhibitors presented their latest collections and technologies, 22.623 visitors from 106 countries—spanning Europe, North and South America, and Asia—seized the opportunity to connect with industry leaders and explore new business opportunities. European visitors have increased by 30 % compared to September 2024.

The denim sector established itself on its own stage in the Blue-Black Denim Hall 7,
Workshops, creative installations, and fashion presentations, such as the Blue Black Denim Show, made this section one of the most vibrant areas of the fair. Artistic and innovative denim collections showcased the latest developments in the denim industry, including metallic-shimmering fabrics and vintage-reworked denim.
Since the introduction of this segment, Texhibition Istanbul has recorded a significant increase in visitors from the EU, while demand for Turkish denim fabrics has grown considerably.

A central theme at Texhibition Istanbul 2025 was the sustainable transformation of the Turkish textile industry. More and more companies are embracing eco-friendly processes, energy-efficient production methods, and innovative recycling solutions.

Türkiye’s textile and apparel sector is a global leader with an export volume of $32.1 billion. Minister of Trade Ömer Bolat emphasized that Türkiye is among the world's top six textile exporters and the EU’s third-largest supplier. Texhibition Istanbul strengthens the industry by showcasing innovation and design expertise on a global scale. In response to rising costs and global competition, Türkiye successfully focuses on sustainability, technology, and market differentiation.

EDANA has announced the three nominees for the FILTREX™ Innovation Award 2025, recognizing outstanding innovation in the filtration industry. The FILTREX™ Innovation Award honors innovation in the filtration sector, recognizing the ongoing commitment to excellence by manufacturers of nonwoven-based filtration products and components.

The nominees are:

GESSNER – Lignin-Saturated Cellulose Filter Media
GESSNER’s innovative lignin-saturated cellulose filter media sets a new standard in sustainable filtration. Designed to reduce your product’s carbon footprint, this eco-friendly solution replaces fossil-based resins with renewable lignin, saving up to 100 kg of crude oil per ton of material. Perfect for engine air, oil, and fuel filter elements, it combines top-tier filtration performance and durability with lower formaldehyde emissions during curing. Experience sustainability without compromise - achieve high-efficiency filtration, optional flame retardancy, and a tangible step towards a greener future with our lignin filter media.

Hollingsworth & Vose – NanoWave®ESA
Hollingsworth & Vose is a manufacturer of engineered materials. Their innovation NanoWave®ESA is an all-synthetic 3D media designed for high efficiency respiratory protection. Filters can be designed with minimum media processing while extending the filter life. It is free of PFAS, is safe to use, and can meet the demand for smaller and smaller filters without compromising on comfort. NanoWave®ESA can be produced with a stretch so that highly efficient, stretchable, breathable and drapable garment can be cut to size.

Johns Manville – Evalith®
Johns Manville, a Berkshire Hathaway company, and a leader in the filtration business with manufacturing lines in Europe and the US, has pioneered an innovative recycling process that converts post-industrial HVAC bio-soluble glass microfiber filtration media waste into compounded pellets for injection molding. The resulting pellets, with 30% glass fiber, are being used to create durable, second-life products. This eco-friendly solution prevents landfill waste, reduces CO₂ emissions, and supports a circular economy.. It ensures that the produced PP tapes from the starEX tape extrusion line are wound into perfect packages that improve productivity and fabric quality on the looms. The bevelled bobbin edges avoid that tapes come off during doffing, transport and handling and increase loom efficiency during weaving. The automatic bobbin change procedure of twinTAPE winders reduces operator work significantly, and the patented linear traverse system features an infinitely variable stroke, allowing a wide variety of bobbin designs. As the winder does not need lubrication, maintenance work is reduced to cleaning, which saves significant amounts of operator time.

Each of the three companies will have a 10-minute slot to present its innovation during the FILTREX™ 2025 event, held on 25-26 March 2025 in Vienna, Austria. Attendees will have the opportunity to cast their votes and select the winner, with the award being presented during a reception at the end of the first day.

Since its launch in 2004, FILTREX™ has established itself as the leading platform for professionals in the filtration media sector. This two-day conference gathers executives and technical experts from across the industry, including filter media producers, converters, raw material suppliers, testing equipment manufacturers, laboratories, and research institutions. The programme offers insights into market trends, cutting-edge filter materials, advancements in media design, air and liquid filtration, automotive applications, and developments in testing and standardization.

The undersigned PROs and business associations launched the Textile PRO Forum, a unique voluntary initiative designed to harmonise and share best practices for effective and efficient implementation of the Extended Producer Responsibility for textiles and footwear (Textiles EPR) across Europe.

As Europe prepares for the mandatory separate collection of textile waste and with the revision of the Waste Framework Directive entering its final stage, the EPR schemes have become a cornerstone of the European strategy for sustainability and circularity of textiles.

These EPR schemes and the related PROs will operate differently in each EU Member State, reflecting national legislation, market conditions, and infrastructure. While this diversity reflects local features, it also presents a challenge for efficiency and for businesses which will face the complexity of up to 27 different EPR models for textiles.

The Textile PRO Forum addresses this need by bringing together experienced PROs and national business associations engaged in the implementation of the Textile EPRs. Its mission is to foster collaboration, harmonization, and knowledge-sharing among the Textile EPR Producer Responsibility Organizations (PROs).

Initiated by Refashion, the first PRO for textiles, and by EURATEX, the European Textile and Apparel Confederation, the Textile PRO Forum is coordinated by EURATEX. The initial key activities include the Forum set up and the following strategic workstreams:

• Reduce administrative burden
• Harmonize approaches to implement the eco-modulation fees, set by legislation
• Supporting recycling
• Harmonise framework
• Set up, creation and expansion of PROs

List of the participating organizations

1. Asociación para la Gestión del Residuo Textil y Calzado
2. ATOK
3. Cobat Tessile
4. Comeos
5. Creamoda
6. Danish Fashion & Textile
7. Electrao
8. Erion Textiles
9. EURATEX
10. Fedustria
11. Finnish Textile & Fashion
12. Gesamtverband Textil- und Mode
13. Inretail
14. Modint
15. Reconomy / Redress
16. Recydata
17. Refashion
18. RETEX.Green
19. Retur
20. REFABRIK
21. Stichting Producentenorganisatie UPV Textiel
22. TEKO – Swedish Textile and Fashion Industries

Members of TMAS – the Swedish textile machinery association – are providing crucial manufacturing and automation services to the filtration sector, which is an often invisible but very significant part of the global textile industry.

Technical woven and nonwoven fabrics are used in a wide variety of products in filtration systems for air, gas and liquid filtration, touching on almost every facet of life in the 21st Century.

They are crucial to aerospace and road transportation and a vast range of industrial processes and also to be found in every home, hotel and institutional building in air conditioning systems and household appliances such as washing machines and vacuum cleaners.

At its Skjåk manufacturing plant in Norway, for example, Interfil manufactures an annual 230,000 air filter units from a staggering range of some 15,000 variants, with 9,000 products moving continuously through the differing stages of the plant at any time each day, and a daily finished output of 1,100 products.

It’s a similar situation at the US plant of Filtration System Products (FSP) in Farmington, St Louis, which now has a daily production of over 2,200 filter hoses and media.

Both Interfil and FSP rely on the automated material handling expertise of TMAS member Eton Systems.

Eton’s individually addressable product carriers are designed to eliminate manual transportation and minimise handling throughout a manufacturing plant, ensuring each individual product arrives at its correct position precisely when required for each separate process step.

Interfil has relied on Eton automation since 2014, when a 50-metre overhead conveyor system was designed and installed to link the company’s two production halls at the Skjåk plant, eliminating the need for manual handling and truck transport between the facilities. This has resolved the challenge of having semi-finished products made far from the final assembly area, not only improving efficiency, quality control and component traceability across all parts of production, but also increasing on-site safety due to the need for fewer trucks.

FSP has meanwhile calculated that since installing an Eton system in 2023, it has increased its production output by 60% using the same number of operators and the same working hours as with the previous manual system. Eton’s inbuilt quality system also ensures that only 100% perfect products are unloaded from the system, allowing for a much more efficient quality control process. In addition, Eton’s compact method of moving single units through the production process has saved floor space and created a safer and more ergonomic work environment.