From the Sector

The next-generation card TC 30i has earned popularity in main textile markets by achieving proven results in real-world operating conditions – for cotton yarn and for man-made fibers. It is suitable for a uniquely broad range of applications, including fine count (with the TC 30Fi model) and recycling (with the TC 30Ri model). All orders from the last few months are now being installed, so that the TC 30i can demonstrate ist positive impact on productivity and quality at many more mills worldwide

The TC 30i is designed to maximize process efficiency and product quality for spinning. Due to its intelligent, self-optimizing functions it achieves consistent results from any raw material while reducing or eliminating the demand for operator intervention. The machine has already proven up to 40 % higher productivity in man-made fiber applications. In recent trials with cotton applications, customers in Indonesia and Türkiye have achieved outstanding results, too.

The T-GO automated gap optimizer improves quality by enabling the smallest and most precise carding gaps – far beyond anything possible with manual settings. Second, the TC 30i maximizes quality and productivity by increasing the number of active flats without sacrificing flexibility in the pre- and post-carding areas due to the larger cylinder diameter. And third, the TC 30i minimizes cotton waste because it features a new and highly precise mote knife at the first licker-in. Customers can automatically optimize and adjust the mote knife settings to meet their specific needs. Combined with the impact of our WASTECONTROL feature, this significantly reduces material waste.

Big benefits for Budi Texindo Prakarsa
Budi Texindo Prakarsa is a leading spinning mill based in Indonesia, specialized in the production of premium cotton yarn with an annual capacity of 80,000 spindles. In their recent trials with the TC 30i, they produced 100 % cotton yarn (Ne 20 to Ne 30) via ring-combed processes. Compared to the previous benchmark, productivity increased by up to 30 % with the same IPI quality level. At the same time, energy and air consumption per kilogram have been reduced.

Measurable advantages for Mem Tekstil
In Türkiye, Mem Tekstil is one of the largest integrated manufactures in the textile sector. Their products range from knitting, dyeing, rotation and digital printing to ring spinning, open-end spinning and vortex spinning. With Trützschler's TC 30i they produced a yarn (Ne 20) made from 100 % cotton soft waste via open-end (OE) spinning. Its engineers tested the TC 30i because they are considering upgrading older card models from a Swiss competitor. Our machine has increased productivity from 70 kilograms per hour to 160 kilograms per hour with the same or better quality. This shows once again that modernization can be worthwhile.

Super results for SAFTEKS
SAFTEKS is another Trützschler customer located in Türkiye. The company produces cotton yarns with a monthly production capacity of 2100 tons. It uses OE spinning to manufacture 100 % cotton yarn (Ne 20) from 40 % virgin cotton and 60 % cotton soft waste. Swapping its cards for the TC 30i made it possible for SAFTEKS to increase its output capacity from 70 tons per day to 85 tons per day. That is a productivity boost of more than 20 %, with the same level of quality.

Promising results for PT Dhanar Mas Concern in man-made fiber applications
PT Dhanar Mas Concern (Danar Mas) is an Indonesian company dedicated to the production of high-quality textile products. The company specializes in spinning yarns and manufacturing greige fabrics. They use our TC 30Si card, which is specially customized for man-made fibers. In recent trials with the TC 30Si, Danar Mas produced a ring carded polyester yarn (Ne 20 to Ne 30) and a viscose yarn (Ne 30 to Ne 40) via vortex spinning. In both applications, the next-generation card produced 125 kg/h of material at the same IPI quality level, up to 40 % more than the company produces with its current benchmark.

Fashion for Good and The Microfibre Consortium launch 'Behind the Break: Exploring Fibre Fragmentation,' a study investigating the key drivers of fibre fragmentation. The research aims to challenge root causes and assumptions, address data gaps, and validate test methods. Tackling the issue at the source, this project is c reated to advance the industry knowledge needed to mitigate fibre fragment pollution.  
 
The project brings together major fashion brands and manufacturers including adidas, Bestseller, C&A, Inditex, Kering, Levi Strauss & Co., Norrona, ON, Paradise Textiles, and Positive Materials, with Under Armour joining as a project partner. Testing will be conducted across three laboratories - Paradise Textiles, Under Armour, and IMPACT+ Network from Northumbria University - to analyse fibre fragmentation in cotton knit, cotton woven, and polyester knit fabrics.  

BEHIND THE BREAK: Data required to understand root causes of fragmentation  
Fibre fragmentation is a significant topic of concern across the industry, with studies highlighting the potential threat to ecosystems and human health. This underscores the urgent need for the development of effective strategies aimed at mitigating the negative impact of fibre fragments.  
 
In recent years, several domestic and industrial mitigation efforts have been developed to capture fibre fragments before they enter air, water, and soil. However, the focus lies in reducing fibre fragments from entering the environment downstream, rather than tackling the problem at the source.

It is pivotal for the industry to better understand the root causes and mechanisms of fibre fragmentation. Therefore, under this initiative, Fashion for Good and The Microfibre Consortium are launching:  

• A new report, which aims to offer a snapshot of the issue of fibre fragmentation through the lens of the textile and fashion industry, unpacking various aspects of this complex issue (definition, sources and pathways, root causes, analytical test methods, solution portfolio, biodegradation, toxicity and regulation).  
• “Behind the Break: Exploring Fibre Fragmentation” project, identifying root causes of fibre fragmentation within manufacturing processes (such as different dye methods) and how these influence fibre fragmentation. It will focus on three different fabric types - cotton knit, cotton woven and polyester knit. The project includes various testing methods, leveraging the expertise of project partners Under Armour, Impact+ and Paradise Textiles. You can learn more about the testing details here.

"Fibre pollution is a challenge that the industry faces as a whole, so we are partnering with The Microfibre Consortium to contribute to the foundation of data that will help us better understand the root causes of fibre fragmentation. The focus on different testing methods will allow us to reduce uncertainty, take a common direction and set priorities for future research and initiatives within the industry.” Katrin Ley, Managing Director at Fashion for Good.  

This initiative aims to identify the most effective approaches to tackling fibre fragmentation at the source through the following insights:  

• Enhancing Test Methods: Validate and refine testing techniques to ensure accuracy, reliability, and alignment with industry standards.
• Strengthening Data Correlation: Compare results across methods to identify variations, uncover discrepancies, and establish clearer data connections.
• Driving Improvements: Address limitations in current methods, expand databases, and support better design and supply chain practices.
• Supporting Stakeholders: Equip partners and industry players with practical strategies to reduce fragmentation through improved design and manufacturing.
• Informing Policy: Provide valuable insights into contamination and fibre structures to shape effective regulations and policies.

To read the report and learn more about the project click here.
“Partnering with Fashion For Good has helped to unite the project partners behind the ongoing need for alignment on closing fibre fragmentation knowledge gaps. With this rallied support, we can build on the existing state of knowledge and make great strides in addressing urgent topic challenges for a future of informed, science-led and integrated mitigation action.” Kelly Sheridan, CEO at The Microfibre Consortium.
 
“By conducting this study, we are taking a proactive approach to addressing microfibre release. Our goal is to leverage data-driven insights to improve our processes, product design, and sourcing practices, thereby contributing to a less polluting industry. Collaboration across stakeholders is crucial to accelerating our progress toward a more sustainable future.” Lucie Anne Martinol, Textile Innovation Lead at ON.  
 
“At Paradise Textiles, we recognise that the future of the fashion and textile industry hinges on our ability to address challenges like fibre fragmentation head-on. By partnering with Fashion for Good and The Microfibre Consortium, we're bringing collective insights together to validate theories on the root causes of fibre fragmentation. Our objective is to identify processes and strategies that mitigate fibre pollution through informed textile design and manufacturing processes. We're excited about continuing this critical work and pioneering innovative technologies that can reshape the industry for the better.” Lewis Shuler, Head of Innovation at Alpine Group/Paradise Textiles
 
“Positive Materials believes that reducing fibre fragmentation requires innovation at every stage. Our partnership with Fashion for Good and The Microfibre Consortium on Behind the Break is critical because we're not just aiming to reduce shedding; we're making sure our materials maintain the high standards our customers depend on. It’s about finding that balance where environmental responsibility drives innovation, not compromises it.” Elsa Parente, Co-CEO & CTO of Positive Materials

Oerlikon Manmade Fibers Solutions recently hosted its highly anticipated Innovation and Technology Day at the Deltin Hotel in Daman by end of January 2025. The event attracted over 300 participants, including industry experts, partners, and stakeholders, who gathered to explore the latest advancements and trends in the manmade fibers industry in India.

Customer Event in Daman, India
The Innovation and Technology Day commenced with a warm welcome and introduction by Wolfgang Ernst, Chief Sales Officer (CSO) at Oerlikon Manmade Fibers Solutions, and Debabrata Ghosh, Head of Sales at Oerlikon Textile India. They provided an overview of the Indian market and its challenges.

“The Indian textile industry, particularly the chemical fiber sector, is experiencing significant growth and transformation. This development is driven by increasing production capacities, strategic investments, and a shift in global consumption patterns”, said Ghosh. India's production of manmade fibers (MMF) is robust, with annual outputs of 4.8 million tons of Polyester Filament Yarn (PFY), 1.7 million tons of Polyester Staple Fiber (PSF), 0.7 million tons of viscose, 0.2 million tons of Polyamide 6 (PA 6), and 25 thousand tons of acrylic. Additionally, the country boasts substantial capacities for PET bottles and films, growing at rates of 7% and 15% per annum, respectively. The Indian market is witnessing significant expansions in PTA (Purified Terephthalic Acid) capacity, with major projects underway by Indian Oil Corporation, GAIL, MCPI, Reliance Industries, and the Adani-Indorama joint venture. These expansions are set to increase the PTA capacity from the current 6.296 million tons to over 14 million tons by 2030.

Market Dynamics and strategic investments
“The global consumption landscape is shifting towards India and emerging Asia, driven by rising incomes and changing demographics. By 2050, India and emerging Asia are expected to account for 30% of global consumption at purchasing-power parity (PPP), up from 12% in 1997. This shift underscores the growing importance of these regions in the global economic landscape”, Ghosh continuous. Significant investments are being made to enhance production capacities and integrate advanced technologies. Indian Oil Corporation, in a joint venture with MCPI, is establishing a 900 TPD continuous polymerization unit in Odisha, supported by substantial government subsidies. Similarly, the Adani Group, in partnership with Indorama, is entering the petrochemical sector with a $3 billion PTA plant in Maharashtra.

Challenges and Opportunities
Despite the positive outlook, the industry faces challenges such as ensuring cost efficiency, scalability, and the seamless integration of new technologies into existing production processes. However, the sector is optimistic about improving profitability, driven by favorable supply-demand dynamics and strategic investments. “The Indian textile and chemical fiber industry is poised for significant growth, supported by strategic investments, capacity expansions, and a favorable global consumption shift. These developments position India as a key player in the global textile market, driving towards a sustainable and prosperous future”, said Ernst.

After the introduction about the current market situation, the event continued with numerous technical presentations in which Oerlikon and its partners presented their technological and solution expertise along the textile value production chain “From Melt to Yarn, Fibers and Nonwovens”.

“To spin an excellent yarn, you need the prefect melt”, said Moderator André Wissenberg, Head of Marketing, Corporate Communications, and Public Affairs at Oerlikon Manmade Fibers Solutions. How this can be produced using extrusion or continuous polycondensation technology was demonstrated by the keynote speakers Sven Streiber, Regional Sales Director at Oerlikon Barmag, Deepak Lokre, Head of Engineering at Oerlikon Textile India, and Matthias Schmitz, Head of Engineering Recycling Technology at BB Engineering (BBE).

The second session focused on Oerlikons technology partner for manmade fiber spinning mills. Presentations covered topics such as enhancing manmade fiber production with innovative air engineering, automatic handling solutions and quality inspections, as well as air texturizing solutions. Notable speakers included Praveen Kumar Singh, Managing Director of Luwa India, and Luca Lacitignola, Sales Director at Irico Gualchierani Handling (IGH), Simone Ducceschi, Sales & Project Manager at Thema Systems, as well as Ralf Morgenroth, Head of Engineering Textile Machinery at BBE.

The third session delved into solutions for producing the perfect fibers and yarns, with a focus on Oerlikon Barmag POY/DTY, FDY, IDY technologies as well as Oerlikon Neumag BCF and staple fiber line plants. Presentations were delivered by Philip Jungbecker, Head of R&D, and Guido Dresen, Regional Sales Director, both at Oerlikon Barmag, as well Chetan Bhagat, General Manager Sales, and Sameer Mehrotra, General Manager Service at Oerlikon Textile India. Ralf Morgenroth added further insights of the compact spinning solution VarioFil from BBE.

Environmentally friendly recycling solutions
The fourth session highlighted environmentally friendly recycling solutions, featuring insights from Sven Streiber and Sudipto Mandal, Sales and Marketing Manager at Oerlikon Textile India, and again Matthias Schmitz, BBE. They provided a detailed portfolio overview in the field of mechanical and chemical recycling. The new partnership between Oerlikon Barmag and Evonik was also presented to the audience. Finally, this was followed by a session on customer services and digital solutions, where Michael Ruebenhagen, Head of Global Service Sales and Ivan Gallo, Digital Solutions, both at Oerlikon Manmade Fibers Solutions discussed current upgrade and retrofit options, the Digital Academy, and the future of digitalization in manmade fiber spinning mills. Shared Kulkarnie, General Manager Service Sales & Workshops, as well as Chandru Gurbaxani, Digital Solutions, performed together with their German colleagues.

The event concluded with closing remarks again from Wolfgang Ernst, who provided a global market overview and outlook for 2025. Final remarks were given by Atul Vaidya, Managing Director of Oerlikon Textile India. Finaly the event ended with a gala evening with more than 500 participants featuring a fashion show, music, dancing, and excellent food, supported by Decathlon and Garden Vareli.

The Middle East’s industrial sector is synonymous with high-risk environments, particularly in oil and gas production. Workers face hazards such as flash fires, chemical splashes and electric arcs—all within the context of demanding conditions, including sweltering heat and long shifts. In response to these challenges, flame-retardant (FR) fabrics with stretch properties are emerging as the next generation of protective workwear, delivering comfort, safety and durability.

Traditionally, FR fabrics prioritised protection over comfort. However, the increasing demand for ergonomic clothing has driven a shift towards stretch solutions. Thanks to innovations in textile engineering and the influence of modern fashion, these fabrics now combine unparalleled flexibility with the stringent safety standards required in high-risk industries.

Stretch fabrics such as Carrington Textiles’ Flametougher 290AS Flex and Flameflex 300AS demonstrate how this transition is not just a luxury but a necessity. Flametougher 290AS Flex, for example, incorporates 19.5% CORDURA® nylon 6,6 for exceptional durability and strength, blended with 78% cotton for lightweight comfort. At just 290gsm, it ensures workers maintain mobility without compromising on protection.

Meeting the needs of Middle Eastern workers, Flameflex 300AS, weighing 300gsm, provides a perfect balance of durability, flexibility and flame resistance. Its 83% cotton and 14% polyester composition ensures longevity, while 2% EOL fibres enable enhanced elasticity—critical for workers in physically intensive roles such as oil rig operations or refinery maintenance.

Flexibility in workwear isn’t just a matter of comfort, it’s a matter of safety. Restricted movement can lead to fatigue, reduced compliance with safety standards and accidents. Stretch FR fabrics excel in adaptability. Whether it’s a worker scaling scaffolding on an oil platform or handling maintenance in a petrochemical plant, garments made with stretch FR textiles allow for the unrestricted movement critical to performing tasks safely.

The rise of these type of fabrics also owes much to the fashion industry. Decades of innovation in stretch garments for everyday use have created a ripple effect in workwear. Workers increasingly expect the same level of comfort and fit in their protective clothing, and manufacturers are responding.

Autoneum has supported Renault Group in the development of Renault Emblème, a low-carbon demonstration car designed to reduce greenhouse gas emissions by 90 percent over its entire life cycle. As a key partner of the project, Autoneum further optimized the environmental performance of its sustainable Pure technologies, which were used for numerous components in the vehicle interior and exterior. Leveraging its proven expertise in the development of lightweight and fully recyclable monomaterials with a high recycled content, as well as in the areas of life cycle analysis (LCA) and product innovation, Autoneum was able to reduce the carbon footprint of its parts and contribute to a significant reduction in vehicle weight for Renault Emblème.

Increasingly stringent regulations to reduce greenhouse gas emissions on a global scale, new directives and the electrification of mobility require innovative approaches from the entire automotive industry. To support vehicle manufacturers in achieving their sustainability targets, Autoneum continuously optimizes the environmental performance of its products and processes: from further increasing the share of recycled content and the end-of-life recyclability of its lightweight technologies to reducing waste and shifting to renewable energy in its production facilities. In addition, the Company is working closely with customers and partners to validate data and products together. One of the most recent examples of such a successful collaboration is Autoneum’s contribution to Renault Emblème.

The Renault Emblème demonstration car emits 90% fewer greenhouse gases over its entire life cycle than a comparable vehicle produced today. To achieve these ambitious decarbonization targets, Renault Group assembled more than twenty suppliers from across the industry to participate in specialized projects in five different areas: eco-design, raw material selection, manufacturing, use and end of life. In addition to providing valuable expertise in the areas of LCA and product development, Autoneum’s contribution entailed the further optimization of its environmentally friendly Pure technologies, which already today are characterized by an excellent sustainability performance across the product life cycle and also include the Company’s growing portfolio of monomaterial technologies made of 100 percent polyester.

Autoneum’s innovative and lightweight materials were used for around thirty fiber-based components in the interior and exterior of Renault Emblème, including the carpet, the underbody panels and wheelhouse outer liners as well the front and rear trunk. Thanks to the high recycled content, the waste-free production process and the excellent recyclability of the materials at the end of their service life, Autoneum was able to reduce drastically the carbon footprint of the components. This outstanding achievement was made possible by further boosting the sustainability performance of existing technologies such as Ultra-Silent, Propylat PET, Hybrid-Acoustics and Autoneum’s monomaterial polyester carpet systems. In addition, the parts contributed to a weight reduction, which positively affected both the carbon footprint and the range of the electric car.

International technology group ANDRITZ has received an engineering order from US textile recycling innovator Circ in anticipation of its first large-scale textile recycling plant. The plant will be the first to recover cotton and polyester from blended textile waste.

Circ® is a pioneering company focused on sustainable solutions for the fashion industry. By converting fashion waste into reusable raw materials for fabrics, Circ reduces the need for petroleum and natural resources. The company’s mission is to build a truly circular economy to protect the planet from the cost of clothing.

ANDRITZ has been successfully conducting trials for Circ at the ANDRITZ Fiber R&D Center in Springfield, Ohio, USA, for several years. The successful partnership and recent developments have led to the decision to expand this cooperation.

The majority of fashion waste consists of polyester-cotton blends, which poses a significant challenge to achieving greater circularity. In particular, the separation of cellulosic and synthetic fibers from textile waste has been a major obstacle. Circ’s innovative recycling process can break down polycotton textile waste into its original components – polyester and cotton. The forthcoming plant will process 200 tons of textile waste per day, allowing cotton to be recycled for lyocell production and polyester to be reused for polyester production. This will reduce the need for virgin raw materials.

Conor Hartman, Chief Operating Officer at Circ, says: “We remain excited about this continued collaboration with ANDRITZ. Together, we will commercialize Circ’s innovative recycling process and take another step towards a truly circular fashion industry. With its expertise in engineering and building large-scale process equipment, ANDRITZ is the right partner to help us transform textile waste into recycled fibers on an industrial level.

Michael Waupotitsch, Vice President Textile Recycling at ANDRITZ, comments: “We are eager to support Circ in their vision of circularity because the technology they have developed is uniquely suited to solve one of the biggest challenges in fashion waste and recycling. With our holistic knowledge in resizing, mechanical separation, hydrothermal processing, recovery of cellulosic pulp as well as pulp cleaning and pulp drying, we have the right expertise to help them achieve their goals. Our experience in process development and machinery will help bring their innovative recycling technology to life.”

Ibrahim Fibres operates nearly 200 Trützschler cards, which is more than any other business in Pakistan. The leading yarn and Polyester Staple Fiber (PS) manufacturer has partnered with Trützschler for over two decades - and recently wanted to start processing long polyester and viscose fibers. It's an unusual request that brings unique challenges.

Pakistan is the eighth largest exporter of textiles in Asia and has the third largest spinning capacity in the continent. Ibrahim Fibres, located in Faisalabad, is a big contributor to that economic strength. The pioneering company produces a wide range of yarns for woven, and knitted fabrics. This includes various blends of cotton, viscose and polyester in different proportions and combinations with yarn counts ranging from Ne 8 to Ne 50. Ibrahim Fibres uses its own polyester via 240,000 spindles at four factories, mainly to produce poly-viscose and poly-cotton combed yarn. In total, the company manufactures 1,200 tons of PSF per day and consumes around 100 tons of its own materials per day. The remaining material is sold to other textile manufacturers.

An unusual challenge
Teams from Ibrahim Fibres often approach Trützschler with fresh ideas and new expectations. They recently set the challenge of producing top-quality yarns from unusually long polyester and viscose fibers. These fibers are used for luxury textiles, high-performance fabrics, fine bedding and advanced nonwoven materials. The end products benefit from the fibers outstanding strength and durability. Often, people in the textile industry talk about the problems with processing short fibers. But long fibers also present difficulties because they have a tendency to wrap or clog carding elements. Their length also makes them more tightly bound, which means they are more difficult to open.

What was the answer to this unusual challenge? Collaboration! Experts from Trützschler worked closely with partners at Ibrahim Fibres to explore potential solutions. "Our technical teams regularly collaborate with Trützschler’s R&D department to enhance production using Industry 4.0 principles, Al, and the latest technology," says Zafar Iqbal. "We’ve now developed a method for handling longer fibers that improves yarn consistency, end-product performance, and cost efficiency, while reducing waste. Our ongoing partnership with Trützschler continues to drive innovation and efficiency in our operations."

TC 30Si is here to help...
Ibrahim Fibres wanted to process 51mm polyester with 51 mm viscose fibers. In line with these requirements, Trützschler engineers optimized the TC 30Si carding machine for processing long polyester and viscose fibers. This machine is specifically customized for man-made fibers and can process these fibers more effectively due to its larger drum diameter, which results in a 14 % extended carding length. The machine also has 35 % more active flats. It has one licker-in and its cylinder, doffer wire, flat tops and stationary flats are all designed for processing man-made fibers.

"We chose TC 30Si for its advanced features, such as its 1400 mm cylinder diameter, extended carding lengths, and the automatic T-GO gap optimizer," says Zafar Iqbal. "These attributes support our Industry 4.0 goals by enhancing technology integration, data use, and operational efficiency, making it ideal for modernizing production and staying competitive in the textile industry."

And Ibrahim Fibres has even more reasons for choosing the TC 30Si: "It has user-friendly software and an intuitive Human Machine Interface (HMI), making it easy to maintain with minimal adjustments. This card boosts productivity and reduces energy consumption, while also improving consistency and reducing defects."

Polyester has been the cornerstone of the textile printing industry for decades. Its compatibility with the digital sublimation process—a cost-effective, simple technology—has driven exponential growth in polyester printing. However, the very characteristics that make polyester well suited for sublimation printing render this printing technique unsuitable for other materials, such as cotton and some blended fibres, leaving a significant gap in the market.

This gap was, until recently, partially filled by direct-to-textile printing. However, this method requires substantial initial investments in equipment and heavily relies on the time- and resource-consuming pre- and post-processing of fabrics to ensure colourfastness, colour accuracy, and compatibility with different substrates. Consequently, a need arose for a more sustainable and cost-effective solution that could cater to a wider range of textiles.

In response to this demand, Mimaki spent six years developing a breakthrough technology, TRAPIS, a simple two-step textile transfer printing solution, consisting of only an inkjet printer and a high-pressure calender. The design of choice is printed by the inkjet printer onto the company’s groundbreaking Texcol® pigment ink transfer paper. This is then transferred to the application via the calender.

Entirely removing the treatment stages means that printing on non-polyester materials has gone from an expensive and time-consuming task to one that is simple, cost-efficient and more sustainable.

Ideal for home textiles and soft signage which often require vibrant colours but varied materials, this technology gives printers the ability to print on a wide variety of materials, including natural fibres like cotton and silk without losing stretchability or colourfastness. All this can be done with just one type of ink, making the process flexible and adaptable to customer demands.  

The pre-treatment and washing of the fabric is often needed in digital dye printing, producing a significant amount of wastewater in the process. TRAPIS eliminates those stages altogether and is almost entirely waterless, saving around 14.5 litres per square metre of water, an almost 90% decrease in comparison to digital dye printing .

Additionally, this eliminates the need for wastewater treatment facilities, which can be both expensive and constrictive when it comes to where the solution is installed.

CARBIOS, a pioneer in the development and industrialization of biological technologies to reinvent the life cycle of plastic and textiles, and SELENIS, a leading supplier of high-quality specialty polyester solutions, have signed a Letter of Intent to cooperate in the production of PETG. By leveraging CARBIOS’ enzymatic depolymerization technology and Selenis’ expertise in polymerization, the companies aim to develop a premium, sustainable PETG material made from PET waste for the Cosmetic and Healthcare packaging sectors across Europe and the U.S. This partnership follows a two-year collaboration between the two companies and represents a significant advancement in the plastic recycling industry.

PETG is an indispensable packaging material in both the cosmetics and healthcare industries due to its exceptional clarity, durability, mechanical and chemical resistance. CARBIOS’ enzymatic depolymerization solution breaks down all types of PET waste into PTA and MEG monomers, which are then transformed into PETG through Selenis’ advanced polymerization processes. Thanks to the purity of these monomers, PETG issued from biorecycling presents the same properties as virgin PETG, allowing for products packaged in thick, molded pots and lids to be protected and presented attractively. In the medical and pharmaceutical industries, PETG properties are also critical for guaranteeing top packaging performance, sterility, transparency and optical brightness, making it an ideal choice for complex medical device packaging, pharmaceuticals blisters, or any other packaging of diagnostic equipment. The material’s value is therefore further underscored by combining a sustainable recycling solution whilst guaranteeing all needed properties, aligning with consumer sustainability demands and stringent regulatory requirements.

CARBIOS and Selenis’ partnership is the result of extensive pilot and industrial polymerization trials that have refined the quality of the end product. The result is high-specialty PETG grades issued from biorecycling that meet the strict requirements of sectors like cosmetics and healthcare, where Selenis has a strong presence through its Selcare brand.

This year's ITMA Asia + CITME 2024 trade fair appearance of the Oerlikon Polymer Processing Solutions Division between 14 and 18 October 2024 will once again focus on current challenges for the global textile machinery industry: the replacement of old systems with energy-efficient and sustainable technology solutions, the use of digital software and hardware solutions to increase productivity and ensure material quality, and the traceability of all products to enable the recycling of the raw materials used in a future-oriented circular economy.

Oerlikon Polymer Processing Solutions offers complete solutions ranging from extrusion and polycondensation systems to texturized yarn, accompanied by automation and digital solutions. The supply of all process steps from a single source ensures a coordinated technology that guarantees the high quality of the fibers and yarns produced. The entire product portfolio of the supplier of machines and systems primarily to produce polyester, polypropylene and nylon will therefore take centre stage at this year's trade fair.

“The Chinese market continues to have enormous potential for us, even if it has not been able to match the previous times in terms of large new installations of manmade fiber plants and the associated expansion of production capacity for good two years. However, there is still a great need for renewal, especially in terms of sustainability. Shutting down old plants and replacing them with new, modern and energy-efficient technologies is the path to a better and lower-emission future for us all,” explains André Wissenberg, Head of Marketing, Corporate Communications and Public Affairs. “We have been contributing to sustainability with our technology solutions for decades. Be it by increasing energy efficiency with each new generation of machines or by processing new materials,” Wissenberg continues. Oerlikon is proud of the fact that the company has been offering solutions for the textile industry under the e-save sustainability label for 20 years and has saved over 15 million tons of CO2 thanks to the machines and systems developed and installed on the market during this time.