From the Sector

Reset
487 results
comfortemp® nature Lyocell HO 60x Bild Freudenberg
comfortemp® nature Lyocell HO 60x
16.11.2022

Freudenberg presents sustainable product innovations at ISPO 2022

Freudenberg Performance Materials Apparel (Freudenberg) as a leading specialist in woven, knitted and non-woven interlinings and thermal insulation, presents sustainable solutions for sportswear and related product segments of all kinds in Munich.

Trade show visitors will experience a wide range of innovative and sustainable interlinings for active sports outfits, stretch interlinings for yoga wear, Pilates & Co, and thermal insulations that combine perfect outdoor wearing comfort with high warmth retention. With comfortemp® brand thermal insulations and the Active Range, Freudenberg presents a complete package for outdoor and sportswear for winter sports: thermal insulations, interlinings, tapes, lining fabrics and adhesive solutions.

Freudenberg Performance Materials Apparel (Freudenberg) as a leading specialist in woven, knitted and non-woven interlinings and thermal insulation, presents sustainable solutions for sportswear and related product segments of all kinds in Munich.

Trade show visitors will experience a wide range of innovative and sustainable interlinings for active sports outfits, stretch interlinings for yoga wear, Pilates & Co, and thermal insulations that combine perfect outdoor wearing comfort with high warmth retention. With comfortemp® brand thermal insulations and the Active Range, Freudenberg presents a complete package for outdoor and sportswear for winter sports: thermal insulations, interlinings, tapes, lining fabrics and adhesive solutions.

The independent jury has nominated the 100 percent biodegradable thermal insulation comfortemp® nature Lyocell HO 60x, made from Lyocell regenerated fibers, for the Textrends Award fall/winter 2024/25 season. The award is given exclusively to innovative products that are groundbreaking for the development of the textile industry. comfortemp® nature Lyocell HO 60x has a variety of extraordinary performance characteristics as a high warmth retention, bacteria inhibiting and fast drying, furthermore water repellent. High wearing comfort and the assurance of a perfect moisture balance characterize the volume fleece as ideal for the application in sportswear.

Freudenberg is presenting its entire European and global product portfolio from its "House of Sustainability" at ISPO. The "House of Sustainability" supports Freudenberg in minimizing its ecological footprint and maximizing its ecological handprint. For this purpose, the company's own manufacturing processes are designed to minimize the impact on the environment. In addition, products are developed to help customers produce more sustainably.

Source:

Freudenberg Performance Materials Holding SE & Co. KG

(c) Robin Inizan – Lucas Pavy Production
Tearing line by ANDRITZ in operation at the Renaissance Textile plant
11.11.2022

Renaissance Textile starts up the first textile recycling line by ANDRITZ in France

Renaissance Textile in Laval, France has successfully started up a complete textile recycling line, delivered, installed, and commissioned by ANDRITZ Laroche, part of the international technology group ANDRITZ.

The ANDRITZ textile recycling equipment enabled Renaissance Textile to become the first French recycling platform dedicated to industrial end-of-life textiles. The project aims to produce new fibers from the collected post-consumer apparel, which will be used to weave new recycled fabrics in the end.

The new 12,000 m² plant is equipped with a complete tearing line whose design is the result of close collaboration between R&D specialists from ANDRITZ Laroche and Renaissance Textile, as well as customized trials carried out jointly by the two parties at the ANDRITZ technical center in Cours, France.

Renaissance Textile in Laval, France has successfully started up a complete textile recycling line, delivered, installed, and commissioned by ANDRITZ Laroche, part of the international technology group ANDRITZ.

The ANDRITZ textile recycling equipment enabled Renaissance Textile to become the first French recycling platform dedicated to industrial end-of-life textiles. The project aims to produce new fibers from the collected post-consumer apparel, which will be used to weave new recycled fabrics in the end.

The new 12,000 m² plant is equipped with a complete tearing line whose design is the result of close collaboration between R&D specialists from ANDRITZ Laroche and Renaissance Textile, as well as customized trials carried out jointly by the two parties at the ANDRITZ technical center in Cours, France.

The new clothing produced based on this type of circular economy model thus reflects the social and sustainability commitments of Renaissance Textile in terms of decarbonizing the textile industry, the fight against global warming, autonomy in raw material sourcing, and promotion of local staffing, particularly for people who have been unemployed for a long time or are seeking to enter the labor market for the first time. By 2025, for example, Renaissance Textile plans to create no less than 110 direct jobs.

10.11.2022

Indorama Ventures: Resilient YTD earnings in 3Q22

  • Last twelve months (LTM) Core EBITDA of US$2.5B, an increase of 60% YoY
  • Core EBITDA per ton of US$163 in LTM3Q22 and US$159 in 3Q22
  • Operating cash flow of US$1,952 in LTM3Q22, an increase of 59% YoY
  • 3Q22 Core Net Profit of THB 10.34B and Reported Net Profit of THB 8.14B

Indorama Ventures Public Company Limited (IVL) reported a resilient year-to-date performance and increasing earnings in a challenging macroeconomic environment.

IVL posted Core EBITDA of US$606 million in 3Q22, a 39% increase YoY and a decline of 20% QoQ as the strong tailwinds that drove record earnings into 2022 began to normalize in the third quarter.  

  • Last twelve months (LTM) Core EBITDA of US$2.5B, an increase of 60% YoY
  • Core EBITDA per ton of US$163 in LTM3Q22 and US$159 in 3Q22
  • Operating cash flow of US$1,952 in LTM3Q22, an increase of 59% YoY
  • 3Q22 Core Net Profit of THB 10.34B and Reported Net Profit of THB 8.14B

Indorama Ventures Public Company Limited (IVL) reported a resilient year-to-date performance and increasing earnings in a challenging macroeconomic environment.

IVL posted Core EBITDA of US$606 million in 3Q22, a 39% increase YoY and a decline of 20% QoQ as the strong tailwinds that drove record earnings into 2022 began to normalize in the third quarter.  

Strategic acquisitions, including Oxiteno, are bolstering IVL’s increasingly diverse geographic footprint and product portfolio, supporting earnings through volatile economic conditions. Revenue declined 10% QoQ in 3Q and grew 27% YoY as Combined PET, the largest business segment, saw steady volumes through the year, and new portfolio additions performed strongly, such as surfactants in the Integrated Oxides and Derivatives segment. With more than 70% of IVL’s platform catering to consumer daily necessities, demand remains stable.

Fibers segment posted YTD Core EBITDA of $189 million, a rise of 2% YoY. 3Q Core EBITDA increased 2% YoY, and decreased of 11% QoQ, to US$49 million. The Lifestyle fibers business continues to be impacted by the lockdown in China, while management in the Hygiene and Mobility verticals in Europe are effectively managing high energy costs.

Combined PET (CPET) segment achieved YTD Core EBITDA of US$1,192 million, an increase of 42% YoY. Core EBITDA in 3Q22 rose 27% YoY to US$327 million, and declined 24% QoQ, as business remained steady across operations apart from in Europe where peak energy prices continue to put pressure on demand and margins.

D K Agarwal, CEO of Indorama Ventures, said, “We are pleased with our performance across the business cycle. Our management is working hard to extract the advantages that we enjoy in terms of geographic leadership, product diversity, and an unmatched customer base of global household brands. Together with our habitual lens on cost management, these actions will help us to weather the economic challenges and continue to focus on our long-term potential.”

Source:

Indorama Ventures Public Company Limited 

08.11.2022

Ascend buys majority stake in recycler Circular Polymers

Ascend Performance Materials has purchased a majority stake in California-based Circular Polymers, a recycler of post-consumer, high-performance polymers including polyamide 6 and 66, polypropylene and polyester (PET). The deal provides Ascend with a consistent supply of high-quality PCR materials for its ReDefyne™ sustainable polyamides, launched at K 2022.

Circular Polymers, which as part of the deal is renamed Circular Polymers by Ascend, reclaims and processes post-consumer carpet via a unique technology and has redirected approximately 85 million pounds of waste from landfills into new goods since 2018.

“We are focused on helping our customers reach their sustainability goals and Circular Polymers by Ascend provides materials that offer strong performance with a considerably smaller environmental footprint, compared to other technologies like pyrolysis,” said Phil McDivitt, president and CEO of Ascend. “Since we launched ReDefyne, the demand for our circular products has been significant across all segments of our business, including automotive, consumer, electronics and high-performance fibers and textiles.”

Ascend Performance Materials has purchased a majority stake in California-based Circular Polymers, a recycler of post-consumer, high-performance polymers including polyamide 6 and 66, polypropylene and polyester (PET). The deal provides Ascend with a consistent supply of high-quality PCR materials for its ReDefyne™ sustainable polyamides, launched at K 2022.

Circular Polymers, which as part of the deal is renamed Circular Polymers by Ascend, reclaims and processes post-consumer carpet via a unique technology and has redirected approximately 85 million pounds of waste from landfills into new goods since 2018.

“We are focused on helping our customers reach their sustainability goals and Circular Polymers by Ascend provides materials that offer strong performance with a considerably smaller environmental footprint, compared to other technologies like pyrolysis,” said Phil McDivitt, president and CEO of Ascend. “Since we launched ReDefyne, the demand for our circular products has been significant across all segments of our business, including automotive, consumer, electronics and high-performance fibers and textiles.”

Ascend has a sustainability strategy based on three pillars: empowering people, innovating solutions and operating without compromise. Ascend has committed to reducing its greenhouse gas emissions by 80% by 2030 and recently announced two new efforts to reduce the carbon footprint of its products.

Source:

Ascend Performance Materials / EMG

02.11.2022

Nico Reiner as new Chief Financial Officer of Lenzing AG

The Supervisory Board of Lenzing AG, a world-leading provider of sustainably produced specialty fibers for the textile and nonwoven industries, has appointed Nico Reiner as its new Chief Financial Officer. Mr. Reiner will join Lenzing’s Managing Board led by Chief Executive Officer Stephan Sielaff on January 1, 2023. He will succeed Chief Financial Officer Thomas Obendrauf, who is leaving the company of his own volition after seven years.

Nico Reiner has held several positions in his professional career to date, including CFO at globally operating companies such as Schüco Group, AL-KO Group and Pfleiderer Group, as well as management consultant roles. His most recent appointment was as CFO of Vacuumschmelze GmbH & Co. KG, a global player with headquarters in Hanau that specializes in the development, production and marketing of magnetic materials.

The Supervisory Board of Lenzing AG, a world-leading provider of sustainably produced specialty fibers for the textile and nonwoven industries, has appointed Nico Reiner as its new Chief Financial Officer. Mr. Reiner will join Lenzing’s Managing Board led by Chief Executive Officer Stephan Sielaff on January 1, 2023. He will succeed Chief Financial Officer Thomas Obendrauf, who is leaving the company of his own volition after seven years.

Nico Reiner has held several positions in his professional career to date, including CFO at globally operating companies such as Schüco Group, AL-KO Group and Pfleiderer Group, as well as management consultant roles. His most recent appointment was as CFO of Vacuumschmelze GmbH & Co. KG, a global player with headquarters in Hanau that specializes in the development, production and marketing of magnetic materials.

Source:

Lenzing AG

(c) Freudenberg Performance Materials Holding SE & Co. KG
31.10.2022

Freudenberg: Elastic superabsorbers for wound dressings

Freudenberg Performance Materials (Freudenberg) has launched an elastic variant of its flexible superabsorbers for modern wound dressings. These superabsorbers increase the comfort level for patients as well as enabling longer wear time, thus reducing the frequency of dressing changes. Freudenberg is debuting the elastic superabsorbers at this year’s Compamed in Düsseldorf, from November 14 – 17, 2022. Further highlights at the trade fair include components for more sustainable wound care, PU foams with directly applied silicone adhesives, and an innovative hydrophilic debridement foam.

Freudenberg uses a new technology to manufacture the elastic superabsorbers. Unlike other methods, this technology does not perforate or slit the material, thus achieving a high degree of consistent elasticity. Furthermore, the technology used by Freudenberg bonds the superabsorbent fibers more uniformly with the material, thus enhancing the integrity of this layer in the wound dressing.

Freudenberg Performance Materials (Freudenberg) has launched an elastic variant of its flexible superabsorbers for modern wound dressings. These superabsorbers increase the comfort level for patients as well as enabling longer wear time, thus reducing the frequency of dressing changes. Freudenberg is debuting the elastic superabsorbers at this year’s Compamed in Düsseldorf, from November 14 – 17, 2022. Further highlights at the trade fair include components for more sustainable wound care, PU foams with directly applied silicone adhesives, and an innovative hydrophilic debridement foam.

Freudenberg uses a new technology to manufacture the elastic superabsorbers. Unlike other methods, this technology does not perforate or slit the material, thus achieving a high degree of consistent elasticity. Furthermore, the technology used by Freudenberg bonds the superabsorbent fibers more uniformly with the material, thus enhancing the integrity of this layer in the wound dressing.

“Our new elastic superabsorbers demonstrate yet again how Freudenberg components help increase comfort for patients, reduce the workload for nursing staff and lower healthcare costs. Our extensive technology platform and our innovative strength are the basis for this,” Dr. Henk Randau, SVP and General Manager Global Division Healthcare at Freudenberg Performance Materials, said.

Source:

Freudenberg Performance Materials Holding SE & Co. KG

(c) Rieter
Autoconer X6
31.10.2022

Rieter at India ITME 2022

Rieter is presenting the latest innovations in its systems, components and services at the upcoming India ITME 2022 in Uttar Pradesh (India), taking place from December 8 – 13, 2022.

Autoconer X6
The automatic winding machine Autoconer X6 completes the Rieter ring and compact-spinning systems. The machine serves as the final quality assurance in the ring and compact-spinning process and is key to the performance of the subsequent process stages. The Multilink system with Multilot offers maximum flexibility to handle a different type of yarn.

The latest splicer generation OZ1 and OZ2 provides an optimum splice quality based on an open prism. With only two prisms spinning mills can splice the entire spectrum of cotton yarns as well as blends. They are also used for the splicing of cotton-based elastic core yarns in combination with the Elastosplicer. The splice zone exhibits an impressive elasticity in the fabric.

Rieter is presenting the latest innovations in its systems, components and services at the upcoming India ITME 2022 in Uttar Pradesh (India), taking place from December 8 – 13, 2022.

Autoconer X6
The automatic winding machine Autoconer X6 completes the Rieter ring and compact-spinning systems. The machine serves as the final quality assurance in the ring and compact-spinning process and is key to the performance of the subsequent process stages. The Multilink system with Multilot offers maximum flexibility to handle a different type of yarn.

The latest splicer generation OZ1 and OZ2 provides an optimum splice quality based on an open prism. With only two prisms spinning mills can splice the entire spectrum of cotton yarns as well as blends. They are also used for the splicing of cotton-based elastic core yarns in combination with the Elastosplicer. The splice zone exhibits an impressive elasticity in the fabric.

Compacting Solutions
The Rieter compacting devices include the COMPACTapron, COMPACTeasy and COMPACTdrum. Spinning mills can change quickly between ring and compact yarn and offer customers a broader product range.

Recycling Expertise from Rotor to Ring
Rieter offers solutions for the integration of recycled raw material into yarn production to help close the textile loop and make fashion more circular. Both rotor and ring yarns can be produced with a considerable amount of mechanically recycled fibers.

ESSENTIALorder
Based on existing customer information, the webshop ESSENTIALorder visualizes which Rieter machines andn systems are available inside each spinning mill. It therefore offers a personalized shopping experience and facilitates order management, enabling spinning mills to optimize their internal stock levels.

ROBOspin
The piecing robot ROBOspin reduces personnel requirements in the ring spinning section by 50%. The robot also attains productivity increases thanks to higher spindle speeds at equal or higher efficiency.

SSM NEO-FD
SSM is presenting NEO-FD, the assembly-winding machine for precision wound packages for twisting. It meets all requirements for efficient production. The machine features the auto-doffing option and the online back-pressure system for low and high package densities.

Temco CoolFlow Disc
Temco’s CoolFlow texturing discs offer longer lifetime thanks to a brand-new geometry and the latest polyurethane technology. The texturing discs now generate a disc surface that operates at a lower temperature, resulting in slower ageing and abrasion. Further benefits are more stable yarn quality, higher productivity, and an overall process cost reduction.

Photo: Officina39
27.10.2022

Dyeing for good: Officina39 part of design events in Amsterdam

The Italian company offers its dyeing technology for practical and theoretical design explorations at the Fashion For Good Museum in Amsterdam.

On Saturday October 22nd in Amsterdam, Andrea Venier, Officina39 Managing Director, took part in the Denim & Dyeing seminar to talk about Recycrom™, the patented revolutionary and sustainable dyestuffs range obtained through an innovative upcycling process that involves textile fibers from used clothing and manufacturing waste for dyeing and printing applications.

The seminar was organized inside the Fashion For Good Museum by the Stichting Textielcommissie Nederland, together with a Design Challenge to which took part a selection of young designers who have explored Recycrom™’s colorful potential in their creations. The winning designs are exposed in a 2-week pop-up show at Fashion For Good Museum.

The Museum is also hosting the “Knowing Cotton Otherwise” exhibition, that highlights the relationship between cotton and the fashion industry, the role of cotton in an increasingly intertwined web of global cultures, and the sustainable innovations driving its circular transformation.

The Italian company offers its dyeing technology for practical and theoretical design explorations at the Fashion For Good Museum in Amsterdam.

On Saturday October 22nd in Amsterdam, Andrea Venier, Officina39 Managing Director, took part in the Denim & Dyeing seminar to talk about Recycrom™, the patented revolutionary and sustainable dyestuffs range obtained through an innovative upcycling process that involves textile fibers from used clothing and manufacturing waste for dyeing and printing applications.

The seminar was organized inside the Fashion For Good Museum by the Stichting Textielcommissie Nederland, together with a Design Challenge to which took part a selection of young designers who have explored Recycrom™’s colorful potential in their creations. The winning designs are exposed in a 2-week pop-up show at Fashion For Good Museum.

The Museum is also hosting the “Knowing Cotton Otherwise” exhibition, that highlights the relationship between cotton and the fashion industry, the role of cotton in an increasingly intertwined web of global cultures, and the sustainable innovations driving its circular transformation.

Innovative solutions from Fashion for Good Innovators Oritain and Officina39, which tackle some of the challenging aspects of cotton’s production such as origin and traceability, dyeing and water use, are also used by the artists in their installations. Three of them have been inspired by the ecofriendly dyeing potential of Recycrom™: the protagonist of the meeting between art and fashion, sustainability and design, past, present and future of the industry. The first artist that has challenged herself is Caithlin Courtney Chong, who has realized an artwork installation with Recycrom™ in the print room, and a suggestive installation dedicated to Officina39’s sustainable dyestuffs.

Source:

Officina39

Texaid / Texcircle
26.10.2022

Swiss Textile Recycling Project TEXCIRLCE

After two years of joint collaboration and research the Swiss Textile Recycling Project “Texcircle” comes to an end. Partners and stakeholders have worked on the vision of a textile cluster where materials flow in circular loops. The goal of the project was to develop high-quality yarns and products incorporating such a large amount of recycled textiles as possible. In the end, several product prototypes from carpets, socks, and curtains to pullovers, padding and accessories have been developed with at least 50 % recycled fiber up to 80 % recycled fibers and yarns.

Europe has a waste problem of 7.5 million waste of which only 30-35 % is collected and less than 1 % of the textile and clothing worldwide is recycled into textiles and clothing again. It is as well found that around 80 % of the impact of a textile product lies in the design.

After two years of joint collaboration and research the Swiss Textile Recycling Project “Texcircle” comes to an end. Partners and stakeholders have worked on the vision of a textile cluster where materials flow in circular loops. The goal of the project was to develop high-quality yarns and products incorporating such a large amount of recycled textiles as possible. In the end, several product prototypes from carpets, socks, and curtains to pullovers, padding and accessories have been developed with at least 50 % recycled fiber up to 80 % recycled fibers and yarns.

Europe has a waste problem of 7.5 million waste of which only 30-35 % is collected and less than 1 % of the textile and clothing worldwide is recycled into textiles and clothing again. It is as well found that around 80 % of the impact of a textile product lies in the design.

Together with the design research expertise of the Lucerne University of Applied sciences and arts, the spinning expertise of Rieter and the sorting and collection expertise of Texaid, systems should be created where products of high quality can be produced of recycled fiber. On board were the expertise of further Cluster partners of Brands, Retailers, and the public sector to see how a joint Cluster and system coukld be established.

The Project Texcircle and cluster is led by the Lucerne University of Applied Sciences and Arts – Art  & Design, and in collaboration with Coop, Rieter, Jacob Rohner AG, Ruckstuhl AG, TEXAID as well as workfashion.com ag. Furthermore, Bundesamt für Zivildienst ZIVI, NIKIN AG, and Tiger Liz Textiles are supporting the project. The project is funded by Innosuisse.

Furthermore, collaboration partners from all over Europe contributed to the project to enable these prototypes and systems.

Through joint developments from the design, the collecting, sorting trials, tearing, and spinning trials until the actual production trials and product testing. The partners were able to recycle 2.5 Tons of pre-and post-consumer textile waste into product prototypes with a promising commercial interest. From socks, west, and pullovers to non-woven felts and accessories to carpets and curtains. Through our 2 years of collaboration, the teamcame across several hurdles in the textile recycling value chain which could be tackled. This was a proof of concept that a circular system is possible and the industry now has to enable this at full scale.

Source:

Texaid / Texcircle

(c) UNIFI
25.10.2022

Hologenix and UNIFI® announce partnership

Hologenix, creators of CELLIANT®, and global textile solutions provider UNIFI®, makers of REPREVE®, have announced their partnership to introduce CELLIANT® with REPREVE®. CELLIANT with REPREVE has the infrared properties of science-backed CELLIANT infrared technology and the sustainable footprint of REPREVE, a brand of recycled fiber.

CELLIANT is a blend of IR-generating bioceramic minerals, which, when embedded into textiles, allows them to convert body heat into infrared energy, returning it to the body and temporarily increasing local circulation and cellular oxygenation. This aids significantly in muscle recovery, increases endurance, and improves overall performance in healthy individuals, among other benefits.

REPREVE recycled performance fiber consists of high-quality fibers made from 100% recycled materials, including post-consumer plastic bottles and pre-consumer waste. It is also certified and traceable with U TRUST® verification and FiberPrint™ technology, to back up customers' recycled claims. Compared to virgin fiber, REPREVE helps to offset the use of petroleum, emitting fewer greenhouse gasses and conserving water and energy in the process.

Hologenix, creators of CELLIANT®, and global textile solutions provider UNIFI®, makers of REPREVE®, have announced their partnership to introduce CELLIANT® with REPREVE®. CELLIANT with REPREVE has the infrared properties of science-backed CELLIANT infrared technology and the sustainable footprint of REPREVE, a brand of recycled fiber.

CELLIANT is a blend of IR-generating bioceramic minerals, which, when embedded into textiles, allows them to convert body heat into infrared energy, returning it to the body and temporarily increasing local circulation and cellular oxygenation. This aids significantly in muscle recovery, increases endurance, and improves overall performance in healthy individuals, among other benefits.

REPREVE recycled performance fiber consists of high-quality fibers made from 100% recycled materials, including post-consumer plastic bottles and pre-consumer waste. It is also certified and traceable with U TRUST® verification and FiberPrint™ technology, to back up customers' recycled claims. Compared to virgin fiber, REPREVE helps to offset the use of petroleum, emitting fewer greenhouse gasses and conserving water and energy in the process.

CELLIANT with REPREVE’s official preferred North America knitting partner is Beverly Knits, one of the largest circular knitters in the US, developing fabric for all markets including intimate apparel, activewear, outdoor products, mattress and bedding, automotive, industrial and medical. Beverly Knits also operates Creative Dyeing & Finishing, LLC.

Source:

Hologenix 

(c) Zünd Systemtechnik AG
25.10.2022

Zünd: Heat Sealing Module – HSM receives composites industry award

At the recent CAMX 2022 Composites and Advanced Materials Expo in Anaheim, California, The Heat Sealing Module – HSM from Zünd was recognized with an Unsurpassed Innovation Award. The HSM significantly facilitates the processing and handling of dry fiber materials with thermoplastic content. This new tool is Zünd’s answer to a demand in the composites industry for wider-spread use and easier processing of these types of materials.

The American Composites Manufacturing Association, ACMA, proclaimed the Heat Sealing Module – HSM the winner of the ACE Award for Unsurpassed Innovation in the “Manufacturing: Equipment and Tooling” category. This award is presented annually to equipment, tooling, a production aid, or software designed to improve manufacturing production, environmental sustainability, or product quality and performance in composites manufacturing.

At the recent CAMX 2022 Composites and Advanced Materials Expo in Anaheim, California, The Heat Sealing Module – HSM from Zünd was recognized with an Unsurpassed Innovation Award. The HSM significantly facilitates the processing and handling of dry fiber materials with thermoplastic content. This new tool is Zünd’s answer to a demand in the composites industry for wider-spread use and easier processing of these types of materials.

The American Composites Manufacturing Association, ACMA, proclaimed the Heat Sealing Module – HSM the winner of the ACE Award for Unsurpassed Innovation in the “Manufacturing: Equipment and Tooling” category. This award is presented annually to equipment, tooling, a production aid, or software designed to improve manufacturing production, environmental sustainability, or product quality and performance in composites manufacturing.

During processing, dry fiber materials are prone to fraying along the edges. Using hot air, the HSM seals the fabric along the cut path in advance of the Zünd Power Rotary Tool – PRT cutting it. Because of this sealing process, the cut can then be performed at full speed, in any direction, and produces both higher-quality parts and greater production efficiencies.

The HSM helps create clean, sealed edges when cutting fiber-reinforced thermoplastic composites. It benefits not only the cutting process itself, but other production processes downstream. Cutting this way leaves behind no loose or uncut fibers and maintains a clean cutting surface and uncontaminated production environment. At the same time, it ensures that cut parts maintain their shape, and this increased stability makes them much easier to handle, especially in fully automated production workflows.

Source:

Zünd Systemtechnik AG

Photo: Unsplash, Sheraz Shaikh
24.10.2022

C.L.A.S.S. presents its new partner Orange Fiber

Founded in Catania, Italy in 2014, Orange Fiber has developed a process to transform what remains from the industrial pressing process of citrus fruits for juice into a unique textile material. The innovative process has been patented in Italy and extended to major citrus juice producing countries around the world.

Recently, Orange Fiber and the Lenzing Group, a leading manufacturer of textile fibers specialties from wood, started a collaboration to produce the first lyocell fiber branded TENCEL™ composed of cellulose from orange and from wood. Produced using the same closed-loop process as the TENCEL™ Lyocell fibers, the TENCEL™ Limited Edition x Orange Fiber contributes to promote sustainability in the textiles. The name of the fiber is LENZING Lyocell LE orange, abbreviated to OF in the yarn and in the fabric composition.

Founded in Catania, Italy in 2014, Orange Fiber has developed a process to transform what remains from the industrial pressing process of citrus fruits for juice into a unique textile material. The innovative process has been patented in Italy and extended to major citrus juice producing countries around the world.

Recently, Orange Fiber and the Lenzing Group, a leading manufacturer of textile fibers specialties from wood, started a collaboration to produce the first lyocell fiber branded TENCEL™ composed of cellulose from orange and from wood. Produced using the same closed-loop process as the TENCEL™ Lyocell fibers, the TENCEL™ Limited Edition x Orange Fiber contributes to promote sustainability in the textiles. The name of the fiber is LENZING Lyocell LE orange, abbreviated to OF in the yarn and in the fabric composition.

Source:

C.L.A.S.S.

Photo: EREMA
21.10.2022

EREMA: Circular economy for PET fibres

The textile industry is the third largest consumer of plastics. While growth rates in the production of fibres and textiles are high, the circular economy has hardly become established in this segment. The EREMA Group is now intensifying development of recycling solutions for this application with their new fibres and textiles business unit. Currently, the focus is on PET fibre materials from fibre production and subsequent processing steps. Technologies for recycling mixed fibre textiles from textile collection sources are to follow in a follow-up project phase.

The textile industry is the third largest consumer of plastics. While growth rates in the production of fibres and textiles are high, the circular economy has hardly become established in this segment. The EREMA Group is now intensifying development of recycling solutions for this application with their new fibres and textiles business unit. Currently, the focus is on PET fibre materials from fibre production and subsequent processing steps. Technologies for recycling mixed fibre textiles from textile collection sources are to follow in a follow-up project phase.

"With EREMA's VACUREMA® and INTAREMA® technology and PURE LOOP's ISEC evo technology, our company group already has an extensive range of machines for fibre and PET recycling applications. For ecologically and economically sound recycling, however, new technological solutions are needed to use the recycled fibres in higher-value end applications and to achieve a functioning circular economy," explains Wolfgang Hermann, Business Development Manager Application Fibres & Textiles, EREMA Group GmbH. The initial focus will be on PET, regarded as a key material for the production of synthetic fibres. The aim is to find recycling solutions that allow PET fibre materials to be prepared for reuse in PET fibre production processes. This is a significant step for the circular economy because PET fibres in textiles account for about two-thirds of the total volume of PET.

In this development work, the EREMA Group can build on existing know-how. Proven recycling technologies have been combined with a new IV optimiser. "This extends the residence time of the PET melt, which is particularly necessary in fibre recycling to efficiently remove spinning oils. Our recycling process also increases the IV value of the PET melt after extrusion back to the specific level that is essential for production of the fibre," explains Hermann. Waste PET fibre from production processes can therefore be further processed into rPET filament fibre, carpet yarn and staple fibre.

Fibre test centre with plant to test customers' materials
In order to accelerate development work, EREMA opened its own fibre test centre a few months ago, where a cross-company team is working on recycling solutions for fibre-to-fibre applications.

Source:

EREMA Gruppe

20.10.2022

Lenzing: Ambitions in textile recycling

  • Lenzing becomes partner company of CISUTAC
  • New project CISUTAC, co-funded by the EU, shall remove barriers to circularity in the textile industry
  • Lenzing will make a contribution in cellulose recycling

The Lenzing Group, a leading provider of specialty fibers for the textile and nonwoven industries, is reinforcing its commitment to circularity by becoming a partner in the CISUTAC (Circular and Sustainable Textile and Clothing) project that is co-funded by the EU. The new consortium was established to support the transition to a circular and sustainable textile sector and, as well as Lenzing, the 27 consortium members include the industry association Euratex, textile company Inditex, PVH, Decathlon and non-governmental organization Oxfam. For its part, Lenzing is focusing on the development of recycling processes for cellulose.
 
CISUTAC aims to remove current bottlenecks in order to enhance textile circularity in Europe. Its goal is to minimize the sector’s total environmental impact by developing sustainable, novel and inclusive large-scale European value chains.

 

  • Lenzing becomes partner company of CISUTAC
  • New project CISUTAC, co-funded by the EU, shall remove barriers to circularity in the textile industry
  • Lenzing will make a contribution in cellulose recycling

The Lenzing Group, a leading provider of specialty fibers for the textile and nonwoven industries, is reinforcing its commitment to circularity by becoming a partner in the CISUTAC (Circular and Sustainable Textile and Clothing) project that is co-funded by the EU. The new consortium was established to support the transition to a circular and sustainable textile sector and, as well as Lenzing, the 27 consortium members include the industry association Euratex, textile company Inditex, PVH, Decathlon and non-governmental organization Oxfam. For its part, Lenzing is focusing on the development of recycling processes for cellulose.
 
CISUTAC aims to remove current bottlenecks in order to enhance textile circularity in Europe. Its goal is to minimize the sector’s total environmental impact by developing sustainable, novel and inclusive large-scale European value chains.

 

Infinited Fiber Company
14.10.2022

Infinited Fiber Company accelerates scaling plans amid turbulence

and textile technology company Infinited Fiber Company’s work to build the world’s first commercial-scale Infinna™ textile fiber factory in Kemi, Finland, has progressed largely according to plan since the announcement of the factory site in June 2022. The company is increasing its focus on scaling Infinna™ production volume further as quickly as possible. This is in response to the continued and growing customer demand for the company’s high-quality regenerated textile fiber Infinna™. The market impacts of the ongoing war in Ukraine – including the increased uncertainty on the global utility, commodity and financial markets – have highlighted the need to proceed rapidly with technology scaling on multiple fronts.
 

and textile technology company Infinited Fiber Company’s work to build the world’s first commercial-scale Infinna™ textile fiber factory in Kemi, Finland, has progressed largely according to plan since the announcement of the factory site in June 2022. The company is increasing its focus on scaling Infinna™ production volume further as quickly as possible. This is in response to the continued and growing customer demand for the company’s high-quality regenerated textile fiber Infinna™. The market impacts of the ongoing war in Ukraine – including the increased uncertainty on the global utility, commodity and financial markets – have highlighted the need to proceed rapidly with technology scaling on multiple fronts.
 
“We are not immune to the global market context in which we operate. The supply chain issues stemming from the Covid-19 pandemic are still wreaking havoc, and the ongoing war in Ukraine has dealt a heavy blow to the global utility, commodity, and financial markets – and to us. We are satisfied with the progress at the site of our planned commercial-scale factory and the opening of the factory remains our key priority. The current, unstable market environment has highlighted the need for us to also accelerate efforts to simultaneously pursue other avenues for scaling production, with the ultimate aim of serving our customers in the best possible way in the long run,” said Infinited Fiber Company CEO and cofounder Petri Alava.
 
Infinited Fiber Company said in June that it planned to build a factory to produce Infinna™, a textile fiber that can be created 100% from cotton-rich textile waste, at the site of a discontinued paper mill in Kemi, Finland. The factory is expected to create around 270 jobs in the area and to have an annual production capacity of 30,000 metric tons, equivalent to the fiber needed for about 100 million T-shirts. The future factory’s customer-base includes several of the world’s leading apparel companies, with most of the future production capacity already sold out for several years.
 
Since June, Infinited Fiber Company has advanced the site-specific basic engineering, recruitment planning, vendor selection, and permit processes according to plan. The limited component availability caused by the continuing impacts of the Covid-19 pandemic and the war in Ukraine have, however, prolonged significantly the delivery times for some of the key equipment and machinery needed for the factory. As a result of these developments, Infinited Fiber Company has re-evaluated its overall factory project timeline. The first commercial fiber deliveries from Kemi are now expected to begin in January 2026. The scope of the project remains unchanged and construction work at the site is expected begin during 2023 as previously communicated.
 
In addition, the European energy crisis sparked by the war in Ukraine has caused the electricity prices in Finland to roughly triple, and the prices of some of the key chemicals needed in the fiber regeneration process have risen by some 200-300% since the start of the war.
 
“We of course don’t have a crystal ball. But according to our advisors and other experts, utility and commodity prices are forecast to normalize before 2026, when we now expect the first commercial fiber deliveries from Kemi to be shipped. In addition to the likely normalization of the market, the extended timeline enables us to undertake the necessary measures to develop the profitability of the future factory. The growing demand for Infinna™, despite the general turbulence, is an encouraging and clear indication of the fashion industry’s commitment to circularity,” said Petri Alava.

Source:

Infinited Fiber Company

Photo: Indorama Ventures Limited
12.10.2022

Indorama Ventures: New plant for nylon yarn

  • Collaboration between Indorama Ventures and Toyobo to meet growing global demand for airbags
  • Newly completed plant in Thailand will supply high-performance nylon yarn to customers in the automotive safety sector

Indorama Ventures Public Company Limited (IVL) celebrated the completion of a plant to manufacture high-performance nylon yarn for automobile airbags. The new plant in Rayong, Thailand, was constructed by Toyobo Indorama Advanced Fibers Co., Ltd. (TIAF), a joint venture that Indorama Ventures established with Toyobo Co., Ltd in November 2020.

The plant, which has been built on the site of Indorama Polyester Industries PCL (IPI) in Rayong Province, will deliver 11,000 tons of high-performance yarn per year to meet global demand for airbags that is expected to grow by 3 percent to 4 percent annually as automakers equip vehicles with more airbags and emerging economies require cars to adopt more safety features. Test production is scheduled to start in October 2022 with the goal of starting commercial production in the middle of 2023.

  • Collaboration between Indorama Ventures and Toyobo to meet growing global demand for airbags
  • Newly completed plant in Thailand will supply high-performance nylon yarn to customers in the automotive safety sector

Indorama Ventures Public Company Limited (IVL) celebrated the completion of a plant to manufacture high-performance nylon yarn for automobile airbags. The new plant in Rayong, Thailand, was constructed by Toyobo Indorama Advanced Fibers Co., Ltd. (TIAF), a joint venture that Indorama Ventures established with Toyobo Co., Ltd in November 2020.

The plant, which has been built on the site of Indorama Polyester Industries PCL (IPI) in Rayong Province, will deliver 11,000 tons of high-performance yarn per year to meet global demand for airbags that is expected to grow by 3 percent to 4 percent annually as automakers equip vehicles with more airbags and emerging economies require cars to adopt more safety features. Test production is scheduled to start in October 2022 with the goal of starting commercial production in the middle of 2023.

In 2014, Indorama Ventures and Toyobo jointly acquired Germany’s PHP Fibers GmbH, a leading airbag yarn maker. Since then, both companies have strengthened their relationship with a focus to expand in the automotive safety sector. Mr Christopher Kenneally, based in Bangkok, leads IVL’s Fibers segment, which produces fibers and yarns across its Hygiene, Mobility and Lifestyle verticals. Mr Ashok Arora, with over 30 years of experience in fibers and polymer operations, will helm TIAF as CEO while maintaining his role as CTO with IVL Fibers.

Source:

Indorama Ventures Limited

Graphic Hologenix
06.10.2022

CELLIANT® Viscose now as flock coating and flock fabric

  • Partnership with Spectro Coating Corp. Expands Horizons for the World’s First In-fiber Sustainable Infrared Viscose

CELLIANT® Viscose, which converts body heat into energy, is a combination of nature and performance. It was developed by materials science leader Hologenix®, creators of CELLIANT, a natural blend of IR-generating bioceramics used in textiles, and Kelheim Fibres, a leading manufacturer of viscose specialty fibers. It is the world’s first in-fiber sustainable infrared viscose.  Now Hologenix has partnered with Spectro Coating Corp., the largest vertically integrated flock coating and flock fabric manufacturer in the world, to create the first flocked infrared material with CELLIANT Viscose.

  • Partnership with Spectro Coating Corp. Expands Horizons for the World’s First In-fiber Sustainable Infrared Viscose

CELLIANT® Viscose, which converts body heat into energy, is a combination of nature and performance. It was developed by materials science leader Hologenix®, creators of CELLIANT, a natural blend of IR-generating bioceramics used in textiles, and Kelheim Fibres, a leading manufacturer of viscose specialty fibers. It is the world’s first in-fiber sustainable infrared viscose.  Now Hologenix has partnered with Spectro Coating Corp., the largest vertically integrated flock coating and flock fabric manufacturer in the world, to create the first flocked infrared material with CELLIANT Viscose.

Flocking is an application method in which tiny fibers are piled on to the surface of a textile, creating textures for both decorative and functional purposes. CELLIANT Viscose in a flocked material has many potential applications in the medical field for tapes, bandages, braces and orthopedic products, home textiles and decor, dog beds, clothing, and more.  CELLIANT features natural, ethically sourced minerals, which convert body heat into infrared energy for increased local circulation and cellular oxygenation.  These CELLIANT minerals are then embedded into viscose plant-based fibers. The Viscose fibers are then flocked onto a base material. CELLIANT Viscose provides all the benefits of being a viscose fiber — lightweight, soft, highly breathable, excellent moisture management — as well as the fiber enhancements from CELLIANT infrared technology.

CELLIANT Viscose is the first IR flocked material that Spectro is producing. CELLIANT Viscose also represents a further expansion into sustainable products for Spectro. In addition, Spectro products are made in the USA, as is CELLIANT’s mineral blend.

Source:

Hologenix

04.10.2022

Carbios appoints new Director of Operations and Expertise Team

  • Stéphane Ferreira joined Carbios as Director of Operations and Executive Committee Member, on October 10, 2022.
  • Frédéric Alarcon appointed Licensing Manager
  • Arnaud Tillon appointed Group Marketing Director
  • New areas of expertise complete the seniority of Carbios’ leadership team, following June appointments of Mathieu Berthoud as Sourcing and Public Affairs Director, Lionel Arras as Industrial Director, and Pascal Bricout as Strategy and Finance Director.
  • Departure of Martin Stephan, Deputy CEO

Carbios strengthens its organization with the appointment of Stéphane Ferreira as Director of Operations. He will be in charge of the business’ global development and will steer the relationship with Carbios’ industrial and commercial partners.

Stéphane Ferreira's team will be reinforced by two new members, including:

  • Stéphane Ferreira joined Carbios as Director of Operations and Executive Committee Member, on October 10, 2022.
  • Frédéric Alarcon appointed Licensing Manager
  • Arnaud Tillon appointed Group Marketing Director
  • New areas of expertise complete the seniority of Carbios’ leadership team, following June appointments of Mathieu Berthoud as Sourcing and Public Affairs Director, Lionel Arras as Industrial Director, and Pascal Bricout as Strategy and Finance Director.
  • Departure of Martin Stephan, Deputy CEO

Carbios strengthens its organization with the appointment of Stéphane Ferreira as Director of Operations. He will be in charge of the business’ global development and will steer the relationship with Carbios’ industrial and commercial partners.

Stéphane Ferreira's team will be reinforced by two new members, including:

  • Frédéric Alarcon, Licensing Manager, who joined Carbios on September 5. His role is to build and deploy the process licensing model that is at the heart of Carbios’ business model;
  • Arnaud Tillon, Group Marketing Director, who joined the firm on September 12. He will support the company’s development by defining and deploying the marketing strategy. He is also in charge of reinforcing the customer culture within the organization.

Martin Stephan will leave his position as Deputy CEO on October 15, 2022, after nearly six years at Carbios.

Emmanuel Ladent, Carbios’ Chief Executive Officer: "The appointment of Stéphane Ferreira as Director of Operations is excellent news for Carbios. His extensive experience in global markets will help Carbios reach a new level, by deploying the company’s proprietary technologies on a large scale. I am also very pleased with the recent arrivals of Frédéric Alarcon and Arnaud Tillon, whose respective expertise in licenses and mass-market offers will be invaluable. Lastly, on behalf of all Carbios’ teams, I want to salute and thank Martin Stephan for his continued commitment to the company’s development. His experience, expertise and skills have been key to developing partnerships which have enabled Carbios to be so close to industrial deployment and recognized as the future worldwide leader of plastics and fibers in the circular economy."

More information:
Carbios Managing Director
Source:

Carbios

Photo: ANDRITZ
04.10.2022

ANDRITZ to supply needlepunch equipment to Jasztex, Canada

International technology group ANDRITZ has received an order from Jasztex Fibers Inc., Canada, to supply a crosslapper to its site of Pointe Claire (Quebec province).
The line will be dedicated to the production of polyester blends for a wide range of applications, including home furnishing, filtration, blankets, architectural, fire retardant, transportation. Start-up is planned for the second quarter of 2023.

ANDRITZ has been a regular supplier of Jasztex. Over the last years, ANDRITZ provided crosslappers for previous investments in Toronto (Ontario) and Pointe Claire (Quebec).

Jasztex’s nonwoven products are sold throughout the bedding, furniture, filtration, acoustic and thermal insulation, transportation and medical markets.

International technology group ANDRITZ has received an order from Jasztex Fibers Inc., Canada, to supply a crosslapper to its site of Pointe Claire (Quebec province).
The line will be dedicated to the production of polyester blends for a wide range of applications, including home furnishing, filtration, blankets, architectural, fire retardant, transportation. Start-up is planned for the second quarter of 2023.

ANDRITZ has been a regular supplier of Jasztex. Over the last years, ANDRITZ provided crosslappers for previous investments in Toronto (Ontario) and Pointe Claire (Quebec).

Jasztex’s nonwoven products are sold throughout the bedding, furniture, filtration, acoustic and thermal insulation, transportation and medical markets.

Source:

ANDRITZ AG

(c) Baldwin Technology Company Inc.
Baldwin’s Rick Stanford and Fi-Tech’s Ian Mills kick off partnership with a handshake
03.10.2022

Baldwin Technology partners with Fi-Tech to represent textile finishing technologies

Baldwin Technology Co. Inc. and Fi-Tech Inc. join partnership to ensure service amid growing demand for sustainable solutions. Fi-Tech Inc. will represent Baldwin Technology Co. Inc.’s complete textile and nonwoven product lines as its sales agent in the U.S. and Canada.

Founded in 1972 and headquartered in Richmond, Virginia, Fi-Tech is an agency and distribution firm for textile and non-woven machinery. Its initial focus was on synthetic fibers and nonwovens and it has since expanded its portfolio to represent manufacturers of complete machines or technical components used in the production of nonwovens, synthetic fibers, polymer, textiles, converting, perforated products and tobacco processing. Fi-Tech also maintains a spare parts inventory for many of the companies it represents.

Baldwin Technology Co. Inc. and Fi-Tech Inc. join partnership to ensure service amid growing demand for sustainable solutions. Fi-Tech Inc. will represent Baldwin Technology Co. Inc.’s complete textile and nonwoven product lines as its sales agent in the U.S. and Canada.

Founded in 1972 and headquartered in Richmond, Virginia, Fi-Tech is an agency and distribution firm for textile and non-woven machinery. Its initial focus was on synthetic fibers and nonwovens and it has since expanded its portfolio to represent manufacturers of complete machines or technical components used in the production of nonwovens, synthetic fibers, polymer, textiles, converting, perforated products and tobacco processing. Fi-Tech also maintains a spare parts inventory for many of the companies it represents.

“With the increasing demand of Baldwin’s finishing technology, we needed to find the right partner for sales promotion in the U.S. and Canadian markets for knits, wovens and non-wovens,” said Rick Stanford, Baldwin Technology’s VP Global Business Development, Textiles. “Fi-Tech of Richmond, Virginia is the perfect partner. They are well established in the textile and non-wovens industry and their portfolio of principals provides excellent synergy with Baldwin’s precision spray and plasma treater systems.”

Baldwin’s solutions are used in a wide variety of fabrics from basic jersey and fleece with softening and anti-microbial finishes to technical fabrics such as outdoor gear, military, upholstery, automotive and industrial fabrics utilizing the latest in technical finishes such as DWR, soil release, flame retardants and insect repellent among others.

Source:

Baldwin Technology Company Inc. / Adduco Communications