From the Sector

Reset
196 results
22.03.2024

EURATEX: European Commission announces “Textiles of the Future” Partnership

In the fringes of the EU Research and Innovation Days, the European Commission has announced 9 new European co-funded and co-programmed partnerships, including “Textiles of the Future”. These partnerships will be at the core of the Horizon Europe Strategic Plan 2025-2027, addressing the green and digital transition, and a more resilient, competitive, inclusive and democratic Europe.

EURATEX has been working towards such a partnership over the last few years. Investing in innovation is a critical component to successfully implement the EU Strategy for Sustainable and Circular Textiles. EURATEX therefore welcomes the Commission’s decision, as a measure to help their 200.000 EU textile companies to remain competitive.

The Textiles of the Future Partnership will be co-managed by the European Technology Platform for Future of Textiles and Clothing (ETP). With a deep knowledge in textiles research and a vast innovation network, ETP stands ready to bring that partnership into reality.

In the fringes of the EU Research and Innovation Days, the European Commission has announced 9 new European co-funded and co-programmed partnerships, including “Textiles of the Future”. These partnerships will be at the core of the Horizon Europe Strategic Plan 2025-2027, addressing the green and digital transition, and a more resilient, competitive, inclusive and democratic Europe.

EURATEX has been working towards such a partnership over the last few years. Investing in innovation is a critical component to successfully implement the EU Strategy for Sustainable and Circular Textiles. EURATEX therefore welcomes the Commission’s decision, as a measure to help their 200.000 EU textile companies to remain competitive.

The Textiles of the Future Partnership will be co-managed by the European Technology Platform for Future of Textiles and Clothing (ETP). With a deep knowledge in textiles research and a vast innovation network, ETP stands ready to bring that partnership into reality.

Source:

EURATEX

HEREWEAR is winner of the Cellulose Fibre Innovation of the Year Photo: DITF
The Flexidress in its various forms
22.03.2024

HEREWEAR is winner of the Cellulose Fibre Innovation of the Year

At the "International Conference on Cellulose Fibers 2024" in Cologne, Germany, the Nova Institute for Ecology and Innovation awarded first place in the Innovation Prize to the project partners of the EU-funded HEREWEAR project. They presented a dress made of cellulose fibers, which is entirely made of straw pulp.

HEREWEAR is an EU-wide research project that brings together partners from research and industry. They are working to establish a European circular economy for locally produced textiles and clothing made from bio-based raw materials.
The HEREWEAR consortium consists of small and medium-sized enterprises and research institutions. HEREWEAR covers all the necessary expertise and infrastructure from academic and applied research and industry from nine EU countries.

The HEREWEAR approach includes technical and ecological innovations in the production of fibers, yarns, fabrics, knitwear and garments, as well as the use of regional value chains and the circular development of fashion items.

At the "International Conference on Cellulose Fibers 2024" in Cologne, Germany, the Nova Institute for Ecology and Innovation awarded first place in the Innovation Prize to the project partners of the EU-funded HEREWEAR project. They presented a dress made of cellulose fibers, which is entirely made of straw pulp.

HEREWEAR is an EU-wide research project that brings together partners from research and industry. They are working to establish a European circular economy for locally produced textiles and clothing made from bio-based raw materials.
The HEREWEAR consortium consists of small and medium-sized enterprises and research institutions. HEREWEAR covers all the necessary expertise and infrastructure from academic and applied research and industry from nine EU countries.

The HEREWEAR approach includes technical and ecological innovations in the production of fibers, yarns, fabrics, knitwear and garments, as well as the use of regional value chains and the circular development of fashion items.

New technologies for wet and melt spinning of cellulose and bio-based polyesters, e.g. PLA, from which yarns and fabrics are produced, form the technical basis. Coating and dyeing processes have been developed and tested as part of the project. In addition to reducing the carbon footprint of the product, another environmental goal is to reduce the release of microfibers throughout the textile manufacturing process and life cycle.

Improving the sustainability and recyclability of the developed garments is ensured by design for circularity and digitally networked production means. On-demand production is realized in so-called "microfactories", which are individualized and produce only for actual demand. This production method can be achieved through regional, networked value chains and enables the traceability of materials and manufacturing processes.

The dress presented at the award ceremony is an example of the cooperation and the different qualifications of the project partners: TNO (Netherlands Organization for Applied Scientific Research) provided sustainably produced pulp. The HighPerCell fibers were produced in DITF's spinning facilities. At the same time, designers from the fashion label Vretena created the design for the flexible, two-piece dress, which can be knitted without cutting waste. DITF textile experts worked with the designers to develop the knitting pattern. DITF textile engineers and technicians produced the knitted fabric and assembled the dress at the institutes’ technical center. DITF computer scientists and engineers created the "value chain" and "digital twins" for digital traceability of the production processes.

The innovation prize was awarded to the HEREWEAR consortiu for their joint achievement. Representatives of DITF Denkendorf and Vretena accepted the award on behalf of the EU project partners.

Source:

Deutsche Institute für Textil- und Faserforschung (DITF)

18.03.2024

Lenzing: Combined annual and sustainability report 2023

  • Combination of financial and non-financial reporting as evidence of the central role of sustainability
  • Measurable progress in achieving sustainability and climate targets
  • Recognized for sustainability and prepares for the European Green Deal

The Lenzing Group has published a combined annual and sustainability report for the first time, reaffirming the strategic importance of social and environmental responsibility for the company. With the title “Ready to join?”, Lenzing would like to extend an invitation to all customers and partners to join forces to renew the textile and nonwovens industries and bring about positive change.

“This annual and sustainability report is also an invitation to find answers together. Lenzing is working tirelessly to make the industries in which it operates even more sustainable and to drive the transformation of the textile business model from linear to circular. For this transformation to be successful, further efforts by the entire industry and a policy designed to ensure a level playing field for sustainability pioneers are needed,” says Stephan Sielaff, CEO of the Lenzing Group.

  • Combination of financial and non-financial reporting as evidence of the central role of sustainability
  • Measurable progress in achieving sustainability and climate targets
  • Recognized for sustainability and prepares for the European Green Deal

The Lenzing Group has published a combined annual and sustainability report for the first time, reaffirming the strategic importance of social and environmental responsibility for the company. With the title “Ready to join?”, Lenzing would like to extend an invitation to all customers and partners to join forces to renew the textile and nonwovens industries and bring about positive change.

“This annual and sustainability report is also an invitation to find answers together. Lenzing is working tirelessly to make the industries in which it operates even more sustainable and to drive the transformation of the textile business model from linear to circular. For this transformation to be successful, further efforts by the entire industry and a policy designed to ensure a level playing field for sustainability pioneers are needed,” says Stephan Sielaff, CEO of the Lenzing Group.

The results for the 2023 financial year were already published. The report was once again prepared in digital form and is now available.

Source:

Lenzing AG

08.03.2024

Rieter: Partnership with Shanghai's DIW

On March 6, 2024, Rieter received an order for the first batch of Rieter technology amounting to around CHF 62 million from Shanghai Digital Intelligence World Industrial Technology Group Co., Ltd. (DIW). Rieter also signed a strategic partnership with DIW to develop an intelligent yarn manufacturing technology that utilizes digitization and automation to minimize conversion costs.

On March 6, 2024, Rieter received an order for the first batch of Rieter technology amounting to around CHF 62 million from Shanghai Digital Intelligence World Industrial Technology Group Co., Ltd. (DIW). Rieter also signed a strategic partnership with DIW to develop an intelligent yarn manufacturing technology that utilizes digitization and automation to minimize conversion costs.

Rieter and DIW signed a first order in the amount of around CHF 62 million for combers and draw frames that will provide the basis to transform DIW’s spinning mills into state-of-the-art industrial textile operations. DIW, a fast-growing company specializing in intelligent manufacturing and industrial operation services, selected Rieter following a competition in which the company’s machines achieved better stability and higher production than competitors. The strategic partnership of DIW and Rieter is designed to further enhance the overall operational efficiency of DIW’s mills by providing highly efficient machines, automation and digitization technology. This will also minimize conversion cost and consolidate the sustainable growth of both companies, while contributing to the high-quality development of the Chinese textile industry.

Source:

Rieter Management AG

06.03.2024

Browzwear adds complete Color Atlas by Archroma® library

Archroma and Browzwear, a company of 3D digital solutions for the fashion industry, have expanded their partnership to bring the complete Color Atlas by Archroma® library of colors to Browzwear’s VSticher, Lotta and Stylezone platforms.

Designers will now have access to a total of 5,760 color references, with 1,440 colors for polyester added to Browzwear’s existing color library of 4,320 Color Atlas colors for cotton poplin. This will support them to collaborate across the entire supply chain, ensuring color consistency from digital design to production for cotton, polyester and blends.

Crucially, the color references in the Color Atlas by Archroma® have been formulated to comply with leading international eco-standards, allowing designers to select dyes and finishes that meet their desired sustainability profile. Each color is available as a physical color standard that includes precise dyeing recipes and compliance data, as well as access to expert technical support from Archroma around the world.

Archroma and Browzwear, a company of 3D digital solutions for the fashion industry, have expanded their partnership to bring the complete Color Atlas by Archroma® library of colors to Browzwear’s VSticher, Lotta and Stylezone platforms.

Designers will now have access to a total of 5,760 color references, with 1,440 colors for polyester added to Browzwear’s existing color library of 4,320 Color Atlas colors for cotton poplin. This will support them to collaborate across the entire supply chain, ensuring color consistency from digital design to production for cotton, polyester and blends.

Crucially, the color references in the Color Atlas by Archroma® have been formulated to comply with leading international eco-standards, allowing designers to select dyes and finishes that meet their desired sustainability profile. Each color is available as a physical color standard that includes precise dyeing recipes and compliance data, as well as access to expert technical support from Archroma around the world.

More information:
Archroma Browzwear Color Atlas
Source:

Archroma

Pointcarre integrates Archroma's portfolio of 5,760 colors Photo: Archroma
23.02.2024

Pointcarre integrates Archroma's portfolio of 5,760 colors

Archroma Textile Effects expands the digital textile design and production system (CAD/CAM) Pointcarre with its entire portfolio of 5,760 colors.

Pointcarre Textile Software enables fashion, home furnishing and technical textiles designers to create accurate digital samples, streamline the fabric weaving, knitting and printing processes, and produce realistic presentations of their collections.

Incorporating the Archroma color portfolio into this workflow will allow designers to bring their ideas to life with greater speed and accuracy. They will not only have access to a vast searchable library of Archroma colors, but they will also be better able to produce the exact color they need at the factory.

All of the Archroma color references can be formulated with dyes that meet leading international eco-standards and the brand customer’s desired sustainability profile.

To support customers to optimize the potential of the new color library, Pointcarre is offering new interactive e-learning modules on its Academy training platform, as well as assistance in several languages.

Archroma Textile Effects expands the digital textile design and production system (CAD/CAM) Pointcarre with its entire portfolio of 5,760 colors.

Pointcarre Textile Software enables fashion, home furnishing and technical textiles designers to create accurate digital samples, streamline the fabric weaving, knitting and printing processes, and produce realistic presentations of their collections.

Incorporating the Archroma color portfolio into this workflow will allow designers to bring their ideas to life with greater speed and accuracy. They will not only have access to a vast searchable library of Archroma colors, but they will also be better able to produce the exact color they need at the factory.

All of the Archroma color references can be formulated with dyes that meet leading international eco-standards and the brand customer’s desired sustainability profile.

To support customers to optimize the potential of the new color library, Pointcarre is offering new interactive e-learning modules on its Academy training platform, as well as assistance in several languages.

More information:
Archroma Pointcarre CAD/CAM Software
Source:

Archroma

06.02.2024

Hohenstein future part of the AI hotspot IPAI

The testing service provider and research partner Hohenstein is joining the Innovation Park for Artificial Intelligence (IPAI) in Heilbronn. There are already points of contact with AI applications in some interdisciplinary research projects. In addition, there is the cooperation with the Munich-based start-up Sizekick and its AI-based technology for size recommendations, which aims to reduce size-related returns in online fashion retail.

"We expect the connection to the IPAI AI network to provide us with valuable impulses to remain fit for the future," explains Hohenstein CEO Dr. Timo Hammer, "This unique platform brings together a wide variety of players with their experience and knowledge. New ideas, projects and even products can be generated with great dynamism in the network as an intelligent response to future requirements. Because one thing is clear - artificial intelligence is THE key technology of the future".

The testing service provider and research partner Hohenstein is joining the Innovation Park for Artificial Intelligence (IPAI) in Heilbronn. There are already points of contact with AI applications in some interdisciplinary research projects. In addition, there is the cooperation with the Munich-based start-up Sizekick and its AI-based technology for size recommendations, which aims to reduce size-related returns in online fashion retail.

"We expect the connection to the IPAI AI network to provide us with valuable impulses to remain fit for the future," explains Hohenstein CEO Dr. Timo Hammer, "This unique platform brings together a wide variety of players with their experience and knowledge. New ideas, projects and even products can be generated with great dynamism in the network as an intelligent response to future requirements. Because one thing is clear - artificial intelligence is THE key technology of the future".

The Innovation Park for Artificial Intelligence (IPAI) in Heilbronn (www.ip.ai) sees itself as an innovation platform for applied AI and a German lighthouse project with international appeal. The center is intended to map the entire AI value chain, from the qualification of specialists to the application of ethically responsible AI. The aim is to use the AI ecosystem to bring together companies, start-ups, research institutions, scientists, and public institutions and to secure Germany's digital independence and competitiveness in a key future technology.

Source:

Hohenstein Laboratories GmbH & Co. KG

05.02.2024

Solvay: Educational alliance with MIT and Fermi High School

Solvay awarded a scholarship to facilitate an educational alliance between the Massachusetts Institute of Technology (MIT) and Fermi High School in Cecina. The initiative unfolded during an event held at Solvay's Rosignano site in Italy, providing a platform for students and faculty. Through this partnership, 200 Fermi High School students participated in STEM* and digital lessons from MIT's Global Teaching Labs project, emphasizing the teaching of scientific disciplines by the American university.

Beyond the scholarship award ceremony, students received a tour of Solvay's factory in Rosignano. The tour highlighted the company's dedication to safety, sustainability, and bridging the gap between academia and industry challenges. The experience illustrated the practical application of academic studies in an industrial context, showcasing Solvay's advanced control procedures, safety protocols, technological innovations, digital transformation efforts, and sustainability measures.

Solvay awarded a scholarship to facilitate an educational alliance between the Massachusetts Institute of Technology (MIT) and Fermi High School in Cecina. The initiative unfolded during an event held at Solvay's Rosignano site in Italy, providing a platform for students and faculty. Through this partnership, 200 Fermi High School students participated in STEM* and digital lessons from MIT's Global Teaching Labs project, emphasizing the teaching of scientific disciplines by the American university.

Beyond the scholarship award ceremony, students received a tour of Solvay's factory in Rosignano. The tour highlighted the company's dedication to safety, sustainability, and bridging the gap between academia and industry challenges. The experience illustrated the practical application of academic studies in an industrial context, showcasing Solvay's advanced control procedures, safety protocols, technological innovations, digital transformation efforts, and sustainability measures.

Discussions during the event included key sustainability topics such as water conservation, energy efficiency, waste management, and Solvay's commitment to promoting a balanced work-life culture and diversity within the workplace.

This collaboration aligns with Solvay's global Corporate Citizenship program. Through this program, Solvay supports individuals and communities, channeling efforts to tackle worldwide societal challenges through strategic investments in education, sustainability, and local community initiatives.

*STEM stands for science, technology, engineering and mathematics

KARL MAYER: Launch of new tricot machine TM 4 EL (c) KARL MAYER GROUP
24.01.2024

KARL MAYER: Launch of new tricot machine TM 4 EL

At the end of last year, KARL MAYER launched the TM 4 EL – a new, highly flexible machine for the mid-range segment in the four-bar tricot machine sector. The machine produces fabrics for upholstery, automotive interiors and outerwear, as well as sportswear items and home textiles.

Featuring KARL MAYER’s proven CFRP technology, the TM 4 EL is up to 30% faster than the previous four-bar tricot machine designed for the commodity sector.

The new TM 4 EL is offered in gauges E 28 and E 32. The available working widths are 210” and 280”, with a working width extension also available. Further width varieties are also planned. Equipment highlights include an integrated Laser Stop to detect yarn breakages early, and functional LED lighting, which illuminates the warp knitting area for easy handling and signals unplanned machine stops using the corresponding colour. The machine can be networked with KM.ON’s secure cloud via the k.ey device to utilise the KARL MAYER GROUP’s digital solutions. This includes, for example, the web-based lapping editor CORE LITE.

At the end of last year, KARL MAYER launched the TM 4 EL – a new, highly flexible machine for the mid-range segment in the four-bar tricot machine sector. The machine produces fabrics for upholstery, automotive interiors and outerwear, as well as sportswear items and home textiles.

Featuring KARL MAYER’s proven CFRP technology, the TM 4 EL is up to 30% faster than the previous four-bar tricot machine designed for the commodity sector.

The new TM 4 EL is offered in gauges E 28 and E 32. The available working widths are 210” and 280”, with a working width extension also available. Further width varieties are also planned. Equipment highlights include an integrated Laser Stop to detect yarn breakages early, and functional LED lighting, which illuminates the warp knitting area for easy handling and signals unplanned machine stops using the corresponding colour. The machine can be networked with KM.ON’s secure cloud via the k.ey device to utilise the KARL MAYER GROUP’s digital solutions. This includes, for example, the web-based lapping editor CORE LITE.

Source:

KARL MAYER GROUP

19.12.2023

Euratex Manifesto: 15 requests for competitiveness and resilience

2024 is a turning point for the European textiles and clothing industry: From 6 to 9 June 2024, European citizens will vote for a new European Parliament and, based on the results, a new European Commission will be formed. In view of this important election, EURATEX publishes a Manifesto, presenting 15 requests which will help to ensure a competitive European textiles and clothing industry.

The textile and apparel industry is making a substantial contribution to European wealth, jobs and growth. Europe counts 192,000 companies employing 1.3 million workers with a turnover of €167 billion and over €67 billion of exports. Entrepreneurship should be recognised as the foundation for a competitive textile industry, offering high quality and sustainable products, based on innovation, creativity and design. European policy makers should recognise such role to textiles and apparel companies and have an open dialogue to create better framework conditions to operate in the internal and global markets.

2024 is a turning point for the European textiles and clothing industry: From 6 to 9 June 2024, European citizens will vote for a new European Parliament and, based on the results, a new European Commission will be formed. In view of this important election, EURATEX publishes a Manifesto, presenting 15 requests which will help to ensure a competitive European textiles and clothing industry.

The textile and apparel industry is making a substantial contribution to European wealth, jobs and growth. Europe counts 192,000 companies employing 1.3 million workers with a turnover of €167 billion and over €67 billion of exports. Entrepreneurship should be recognised as the foundation for a competitive textile industry, offering high quality and sustainable products, based on innovation, creativity and design. European policy makers should recognise such role to textiles and apparel companies and have an open dialogue to create better framework conditions to operate in the internal and global markets.

To realise that vision, the industry and policy makers need to work together on a mix of policy measures and initiatives, which are coherent and offer a transparent and predictable framework for our companies, and make them more resilient and competitive.

These policies should focus around four points:

Develop and implement a “smart” EU industrial policy
Europe should create policies which enhance competitiveness, instead of creating administrative burdens. To EURATEX, each new piece of legislation should undergo a “competitiveness test” to critically look at the impact of the new rules. Europe should also create a favourable environment to promote education and jobs in the industry. The EU textile industry currently employees 1,3 million people, 30% of which is above 50 years old. A critical bottleneck for the textile industry is to attract (young) people and make sure these people have the right set of skills, to operate in a changing textile ecosystem. EURATEX also asks the EU to invest in innovation and digitalisation as they are key to the European competitive advantage. Not only, as the last years have proved, Europe should provide companies with access to sustainable energy at lower prices.

No sustainability without competitiveness
The EU Strategy for Sustainable Textiles is pushing our sector towards new business models with a lower environmental footprint. To realise that ambition, no less than 16 regulatory proposals are on the table, each of them with a different timetable, managed by different departments of the European Commission. EURATEX is committed to sustainability, but asks for economic realism. This set of new regulations needs to be coherent, enforceable, feasible and applicable for SMEs, and not push textile companies out of the market. Moreover, some member states are moving forward faster and some legislations will be decided at national level, creating fragmentation of the market. Such scenarios will hamper Europe and its possibilities to grow.

Ensure free and fair trade
With $224 billion in sold merchandise, Europe is the second major world exporters of textiles and clothes after China ($321 billion). It is therefore important that the global market should be open, free and fair for our industry to continue to thrive. Besides the support to FTAs in general, EURATEX wants to emphasise that all trade agreements should offer effective market access for EU companies and a level playing field in these markets. A free and open market should go hand in hand also with protection against free riders. The EU must always consider enforcement and enforceability when making new laws; it should also take action together with the member states for a better coordination with harmonised criteria for action among Customs Authorities.

Incentivise the Demand for sustainable textiles
Sustainable textile products typically come at a premium price, making it difficult for many consumers and buyers to purchase such products. Many surveys across Europe confirm that around 50% of interviewees do not purchase sustainable fashion products and the main reason is price. EURATEX believes that, to create a demand and help consumers to buy a (genuine) sustainable textile product, there should be standard requirements and fiscal incentives. Public authorities should also implement green public procurements, by increasing the importance of sustainability criteria in their evaluation grids.

Award winners with foundation chairman, foundation MD and professors (c) VDMA e.V. Textile Machinery
Award winners with foundation chairman, foundation MD and professors
08.12.2023

Walter Reiners Foundation honours young engineers

As part of the Aachen-Dresden-Denkendorf International Textile Conference in Dresden, the Chairman of the Walter Reiners Foundation of the VDMA, Peter D. Dornier, presented awards to four successful young engineers. Two promotion prizes and two sustainability prizes were awarded in the Bachelor and Diploma/Master categories. Academic works in which solutions for resource-saving products and technologies are developed are eligible for the sustainability prizes.

A sustainability prize worth 3,000 euros in the Bachelor's category was awarded to Franziska Jauch, Niederrhein University of Applied Sciences, for her Bachelor's thesis on pigment digital printing in denim production.

The promotion prize in the Bachelor's category, also worth 3,000 euros, went to Annika Datko, RWTH Aachen, for her work on determining the polyester content in used textiles.

Dave Kersevan, TU Dresden, was honoured with a sustainability prize in the Diploma/Master's category, endowed with 3,500 euros. The subject of his thesis was the development of a laboratory system for the production of needled carbon preforms.

As part of the Aachen-Dresden-Denkendorf International Textile Conference in Dresden, the Chairman of the Walter Reiners Foundation of the VDMA, Peter D. Dornier, presented awards to four successful young engineers. Two promotion prizes and two sustainability prizes were awarded in the Bachelor and Diploma/Master categories. Academic works in which solutions for resource-saving products and technologies are developed are eligible for the sustainability prizes.

A sustainability prize worth 3,000 euros in the Bachelor's category was awarded to Franziska Jauch, Niederrhein University of Applied Sciences, for her Bachelor's thesis on pigment digital printing in denim production.

The promotion prize in the Bachelor's category, also worth 3,000 euros, went to Annika Datko, RWTH Aachen, for her work on determining the polyester content in used textiles.

Dave Kersevan, TU Dresden, was honoured with a sustainability prize in the Diploma/Master's category, endowed with 3,500 euros. The subject of his thesis was the development of a laboratory system for the production of needled carbon preforms.

This year's promotion award in the Diploma/Master's category, endowed with prize money of 3,500 euros, went to Flávio Diniz from RWTH Aachen. The subject of his Master's thesis was the feasibility of manufacturing ultra-thin carbon fibres.

The award ceremony 2024 will take place in April at the VDMA stand at the Techtextil fair in Frankfurt.

Santoni finalizes Acquisition of Terrot (c) Santoni / Terrot
22.11.2023

Santoni finalizes Acquisition of Terrot

Santoni Shanghai Knitting Machinery Co., Ltd. announces that it has received regulatory approval from Chinese authorities for its proposed acquisition of Terrot GmbH, a manufacturer of circular knitting machines in Germany.

The acquisition represents a pivotal step in Santoni's strategy to advance the circular knitting machine industry. The integration of Terrot into the Santoni ecosystem is projected to increase Santoni's production capacity and boost its market share, and in conjunction with other strategic objectives, firmly solidify Santoni's position as the leading manufacturer in the industry, with unrivaled scale, depth of innovation and expertise.

Santoni Shanghai Knitting Machinery Co., Ltd. announces that it has received regulatory approval from Chinese authorities for its proposed acquisition of Terrot GmbH, a manufacturer of circular knitting machines in Germany.

The acquisition represents a pivotal step in Santoni's strategy to advance the circular knitting machine industry. The integration of Terrot into the Santoni ecosystem is projected to increase Santoni's production capacity and boost its market share, and in conjunction with other strategic objectives, firmly solidify Santoni's position as the leading manufacturer in the industry, with unrivaled scale, depth of innovation and expertise.

Seeking to meet rising demand for high-end circular knitting products, Santoni has pursued an Ecosystem Strategy in recent years, aiming to unify a highly fragmented industry and enhance innovation, sustainability and digitalization to more effectively meet market needs. The deployment of both parties' latest innovation practices, textile automation offerings, integrated enterprise services, C2M solutions, and a platform for designers "Materialliance", will allow Santoni Shanghai and Terrot to connect and bridge demand and offer of circular knitted products.

By incorporating Terrot's offerings, particularly in the double jersey and jacquard sector, Santoni stands to gain a competitive edge in offering machines known for their performance, low maintenance, and cost-effectiveness. Highlighting this shift is Terrot's UCC 572-T, a transfer jacquard machine for sports and leisurewear.

Following the acquisition, Terrot will continue to operate under the leadership of managing directors Robert W. Czajkowski and Dirk Lange. Santoni plans to maintain Terrot’s headquarters in Chemnitz, Germany, along with its facilities, brands, and practices.

Source:

Terrot GmbH

digihub/WFMG: Octo gewinnt Pitch Battle der „TexTech Start-up Night“ (c) Digital Innovation Hub Düsseldorf/Rheinland GmbH
TexTech Start-up Night Pitch-Teilnehmende
15.11.2023

digihub/WFMG: Octo gewinnt Pitch Battle der „TexTech Start-up Night“

Gemeinsam mit der Stadt Mönchengladbach veranstalteten der Digital Innovation Hub Düsseldorf/Rheinland (digihub) und die WFMG – Wirtschaftsförderung Mönchengladbach GmbH am Dienstag, 14. November 2023, die zweite „TexTech Start-up Night“ in der Textilakademie NRW. Bei der Abendveranstaltung versammelten sich rund 100 Personen aus der Branche Textiltechnik (TexTech), um sich über neue Ideen und Geschäftsmodelle auszutauschen.

Einblicke in Textilindustrie und den Standort Mönchengladbach
Insgesamt sechs Start-ups und Ausstellende präsentierten ihre Innovationen in einer Expo. Zu Beginn der Veranstaltung übernahm Mönchengladbachs Oberbürgermeister Felix Heinrichs die Guided Tour durch die Ausstellung: „Es ist großartig zu sehen, wie viele textile Innovationen aus Mönchengladbach kommen. Dies zeigt, dass das Ökosystem hier greift und Mönchengladbach der Standort für die Textilbranche ist.“

Gemeinsam mit der Stadt Mönchengladbach veranstalteten der Digital Innovation Hub Düsseldorf/Rheinland (digihub) und die WFMG – Wirtschaftsförderung Mönchengladbach GmbH am Dienstag, 14. November 2023, die zweite „TexTech Start-up Night“ in der Textilakademie NRW. Bei der Abendveranstaltung versammelten sich rund 100 Personen aus der Branche Textiltechnik (TexTech), um sich über neue Ideen und Geschäftsmodelle auszutauschen.

Einblicke in Textilindustrie und den Standort Mönchengladbach
Insgesamt sechs Start-ups und Ausstellende präsentierten ihre Innovationen in einer Expo. Zu Beginn der Veranstaltung übernahm Mönchengladbachs Oberbürgermeister Felix Heinrichs die Guided Tour durch die Ausstellung: „Es ist großartig zu sehen, wie viele textile Innovationen aus Mönchengladbach kommen. Dies zeigt, dass das Ökosystem hier greift und Mönchengladbach der Standort für die Textilbranche ist.“

Einblicke in die Branche bot zudem die Keynote von Prof. Dr. Maike Rabe, Leiterin des Forschungsinstituts für Textil und Bekleidung an der Hochschule Niederrhein. Sie zeigte auf, welche Bedeutung Start-ups für die Nachhaltigkeits-Transformation der Textil- und Bekleidungswirtschaft haben. Hans-Uwe Gansfort, General Manager FIT Factory C&A, bot im Fireside-Chat mit Peter Hornik, Geschäftsführer des digihub Düsseldorf/Rheinland Einblick in C&A's FIT Factory, die in Mönchengladbach ansässig ist.

Nachhaltige Innovationen für die Zukunft
Bei einem Start-up Pitch Battle konnten sieben Gründerinnen und Gründer ihre Ideen präsentieren:

  • Lars Linnemann, Geschäftsführer Fibraworks, produziert mit der fibraforce Technologie, einem innovaten Wickelverfahren, mehrlagige, multidirektionale Faserhalbzeuge für kosteneffiziente und nachhaltige Leichtbaulösungen.
  • Sarah Neumann und Alexandra Plewnia präsentierten ihr Start-up Octo. Octo hat einen neuen Standard in wasserabweisenden Textilien mithilfe des umweltschonenden Octogarns entwickelt, um der Textilbranche eine nachhaltige Alternative für Fluorpolymere zu bieten.
  • Dr. Hans Peter Schlegelmilch hat sich mit seinem Start-up „Brain of Materials“ der Herausforderung gestellt, aus Textilabfällen ein Recyclinggarn zu entwickeln, das den höchsten industriellen Standards entspricht.
  • Dr. Monika Hauk hat mit Repair Rebels eine Online-Plattform gegründet, die die Lücke zwischen digitalen ModekonsumentInnen und analogen Reparaturdiensten für Kleidung und Schuhe schließt.
  • Yuji Hara stellte das japanischen Start-up AI Silk vor. Dieses arbeitet an innovativen, leitfähigen Fasern, die mit einer Färbetechnik hergestellt werden. Durch die Verwendung von natürlicher Seide und die Leitfähigkeit der Faser selbst ist es gelungen, Elektroden herzustellen, die einige der Risiken und Herausforderungen herkömmlicher medizinischer Elektroden reduzieren, die zu Unbehagen, Haut- und In-vivo-Entzündungen sowie Messausfällen führen können.
  • Dr. Robert Brüll präsentierte die FibreCoat GmbH. Das Start-up mit Sitz in Aachen entwickelt eine revolutionäre Beschichtungstechnologie für beschichtete Fasern in Verbundwerkstoffen.

Das Publikum stimmte im Anschluss über die Vorträge ab und wählte seine zwei Favoriten: FibreCoat und Octo hatten in der zweiten Runde die Möglichkeit, ihre Pitches zu vertiefen und mit dem Publikum zu diskutieren. Das beste Team der TexTech Start-up Night wurde nach der finalen Abstimmung das Start-up Octo. Sarah Neumann und Alexandra Plewnia nahmen den Preis, ein Aussteller-Ticket für das Future Tech Fest am 22. August 2024, entgegen.

Source:

Digital Innovation Hub Düsseldorf/Rheinland GmbH

Adient presented seating innovations at IAA (c) Adient
11.10.2023

Adient presented seating innovations at IAA

Adient, a leader in automotive seating, has presented its latest innovations at the IAA 2023.
 
The current automotive business landscape is marked by shifting industry dynamics, showcasing a strong desire for mobility, with an emphasis on digitalization, cost, and sustainable products. In line with this, Adient’s overall approach is characterized by responding to the need for more sustainable material use, while taking advantage of the potential that sustainable practices hold for streamlining processes.

Adient, a leader in automotive seating, has presented its latest innovations at the IAA 2023.
 
The current automotive business landscape is marked by shifting industry dynamics, showcasing a strong desire for mobility, with an emphasis on digitalization, cost, and sustainable products. In line with this, Adient’s overall approach is characterized by responding to the need for more sustainable material use, while taking advantage of the potential that sustainable practices hold for streamlining processes.

Responding to the need for overall cost and complexity reduction in manufacturing, the Pure Essential seat is especially lightweight. Environmentally-conscious practices such as material separation and recycling, and design for disassembly are embedded into the manufacturing process from the development stage. The visionary seat consists of two materials only – green steel and recyclable polyester (PET).
 
New customer needs in terms of premium comfort are met with the Autonomous Elegance seat, specifically developed to fit Advanced Driver Assistance Systems (ADAS). State-of-the-art findings on ergonomics and human body kinematics have been incorporated following extensive occupant research. They are complemented by advanced comfort assets such as noise cancellation and advanced climate functions. “Our seat demonstrators provide solutions to our customers’ main concerns, and we are looking forward to continuing the strategic product dialogue with them, based on our new demonstrators” highlights David Herberg, Vice President Engineering Adient EMEA. Most features of the seat can already be offered for sourcing, such as the metal structure and seat kinematics (adjustment functions and mechanisms).

Considering optimized use of space as well as sustainability aspects, the automotive supplier has also given its Smart Efficiency seat an update: the seat features a slimmer appearance than its predecessor without compromising on comfort. This design does not only help save space, but also paves the way for new mobility concepts based on battery packaging in electric vehicles.
 
The showcased products will be available for demonstration in customer roadshows as of December 2023.

Source:

Adient

10.10.2023

Textile & Fashion Forum Helsinki 2023

The Textile & Fashion Forum Helsinki 2023, organized by Finnish Textile & Fashion and EURATEX, highlights the discourse on sustainable practices within the textile and fashion industry. This two-day event, scheduled for 26-27 October at the Little Finlandia event center in Helsinki, will include a day of curated company visits.

Finland’s leading textile and fashion forum will showcase the industry's pioneering companies and their pursuit of a sustainable and resilient future. With insightful discussions, inspiring speakers, and thrilling business cases, the event drives transformation and sets new benchmarks for the textile and fashion sector.

The Textile & Fashion Forum Helsinki 2023, organized by Finnish Textile & Fashion and EURATEX, highlights the discourse on sustainable practices within the textile and fashion industry. This two-day event, scheduled for 26-27 October at the Little Finlandia event center in Helsinki, will include a day of curated company visits.

Finland’s leading textile and fashion forum will showcase the industry's pioneering companies and their pursuit of a sustainable and resilient future. With insightful discussions, inspiring speakers, and thrilling business cases, the event drives transformation and sets new benchmarks for the textile and fashion sector.

The Textile & Fashion Forum Helsinki 2023 will focus on critical industry themes. The transformation of the textile and fashion industry relies on three key pillars: the creation of different circular business models matching growth with sustainability, a green and digital transition where information technology is necessary to deliver sustainability, and scaling the business, as how start-ups can make a leap and big companies can evolve their growth strategies. These three themes will be discussed in depth during the event.

The speaker lineup, drawn from Finland, Europe and beyond, demonstrates the expertise connecting on this platform. Noteworthy figures include Tiina Alahuhta-Kasko, President & CEO of Marimekko; Kai Mykkänen, Minister of Climate and the Environment of Finland; Marcus Hartmann, Head of Public Affairs & Sustainability at H&M; Liljana K. Forssten, Range Strategist at IKEA; and Virginijus Sinkevičius, European Commissioner (on video).

Source:

Euratex & Finnish Textile & Fashion

09.10.2023

Lectra joined the CAC Mid 60 and SBF 120 indices

Lectra, a leader in technology solutions for the fashion, automotive and furniture industries, will be listed in the CAC Mid 60 and SBF 120 indices of Euronext as of market close on September 15, 2023. This listing will enhance the visibility of the group with potential shareholders and customers in France and internationally.

Founded 50 years ago, the Lectra Group offers software, connected cutting equipment, data analysis solutions and associated services to players in the fashion, automotive and furniture industries to accelerate their digital transformation and transition to Industry 4.0. In 2017, the company initiated its Lectra 4.0 strategy, with the ambition of becoming an indispensable player in Industry 4.0 worldwide by 2030.

Lectra, a leader in technology solutions for the fashion, automotive and furniture industries, will be listed in the CAC Mid 60 and SBF 120 indices of Euronext as of market close on September 15, 2023. This listing will enhance the visibility of the group with potential shareholders and customers in France and internationally.

Founded 50 years ago, the Lectra Group offers software, connected cutting equipment, data analysis solutions and associated services to players in the fashion, automotive and furniture industries to accelerate their digital transformation and transition to Industry 4.0. In 2017, the company initiated its Lectra 4.0 strategy, with the ambition of becoming an indispensable player in Industry 4.0 worldwide by 2030.

For Daniel Harari, Chairman and Chief Executive Officer of Lectra: “Lectra's entry into the CAC Mid 60 and SBF 120 indices is an outstanding recognition of the successful actions we have taken over the past few years to ensure the profitable growth of our company and the success of our customers. We have changed dimension, notably with the acquisition of our historical competitor, Gerber Technology in June 2021. We have expanded our customer base, launched new cloud-based offerings which have enabled us to significantly increase the volume of SaaS software in our revenues, and offered new Customer Success Management services to support our customers. We have also made Corporate Social Responsibility (CSR) one of the pillars of our strategy.”

More information:
Lectra, PLM stocks
Source:

Lectra

Stefan Brück new Chairman of A+A Advisory Board (c) Messe Düsseldorf GmbH
Stefan Brück, Chairman of A+A Advisory Board
06.10.2023

Stefan Brück new Chairman of A+A Advisory Board

The advisory board of A+A in Düsseldorf, an international trade fair for safety, security and health at work, will soon be under new leadership. Stefan Brück, CEO and Chairman of the Board at UVEX SAFETY GROUP GmbH & Co. KG, Fürth, who has been a member of the A+A advisory board for 7 years, will be the new Chairman. In this position he succeeds Klaus Bornack, Managing Director at Bornack GmbH & Co. KG, who successfully headed the advisory board for 12 years. The handover of office will take place during A+A 2023.

Stefan Brück has developed the Uvex Safety Group into one of the innovation leaders in the international PPE industry. He will assume his future task with over 30 years of industry experience under his belt and is already looking forward to the new challenge.

The advisory board of A+A in Düsseldorf, an international trade fair for safety, security and health at work, will soon be under new leadership. Stefan Brück, CEO and Chairman of the Board at UVEX SAFETY GROUP GmbH & Co. KG, Fürth, who has been a member of the A+A advisory board for 7 years, will be the new Chairman. In this position he succeeds Klaus Bornack, Managing Director at Bornack GmbH & Co. KG, who successfully headed the advisory board for 12 years. The handover of office will take place during A+A 2023.

Stefan Brück has developed the Uvex Safety Group into one of the innovation leaders in the international PPE industry. He will assume his future task with over 30 years of industry experience under his belt and is already looking forward to the new challenge.

“My short and medium-term aim is to move such themes as sustainability but also new technologies and innovations even more into focus in occupational safety. This also includes digital products and solutions such as AI, Virtual Reality or Augmented Reality applications,” explains Stefan Brück and goes on to say: “I look forward to contributing to develop A+A further as the world-leading trade fair and to increasing the social, economic and ecological relevance of PPE on a global scale all year round.”

Source:

Messe Düsseldorf GmbH

Global Fashion Agenda presents new digital film series (c) Fashion Redressed
22.09.2023

Global Fashion Agenda presents new digital film series

Global Fashion Agenda (GFA) presented a new online film series: Fashion Redressed. Produced by BBC StoryWorks Commercial Productions, the captivating series intends to inspire the industry to take action to transform the way we produce and consume fashion.

Global Fashion Agenda (GFA) presented a new online film series: Fashion Redressed. Produced by BBC StoryWorks Commercial Productions, the captivating series intends to inspire the industry to take action to transform the way we produce and consume fashion.

Every day we express ourselves through our clothes. Encompassing cultures, personalities, traditions and beliefs, fashion is core to how we present ourselves to the outside world. But our consumption of fashion and clothing is pushing our planet and societies to its limits. Fashion trendsetters and pioneers are working to meet this challenge head-on with game-changing ideas. At the heart of this is the question: how can we keep expressing all we do through fashion, but without hurting the planet?
 
Focused on finding the answers, Fashion Redressed, comprises multiple films that showcase organisations from across the fashion and textile industries. Launched on a BBC.com microsite, the series spotlights the innovations across the world that are influencing the new seasons of fashion, featuring a collection of stories that depict tailor-made solutions to fit us and our planet.
 
The 11 self-contained branded films showcase a range of participants including: eBay, Elk, The Ellen MacArthur Foundation, Vestiaire Collective, Spinnova, Lenzing, Faherty, FarFetch, Waste2Wear, Colorifix and Forest Stewardship Council. Each film focuses on a bespoke solution that can benefit us and the planet. From the scientist taking inspiration from silk-spinning spiders in Helsinki and the duo taking a deep dive into the genetic makeup of colour in Cambridge, to the pre-loved clothes being brought to life on a global platform from Paris and the importance of cultural appreciation in Arizona, fashion gathers the most creative and innovative minds. This series expresses the dynamism and creativity of the fashion world, spotlighting the people weaving change into the fibres of fashion and those who are working to find the stylish side of a more sustainable sector.
 
The series was unveiled ahead of GFA’s landmark event – Global Fashion Summit: Boston Edition – on 27 September. The forum will bring together fashion stakeholders for agenda-setting discussions and productive meetings on critical environmental and social issues.

Santoni Shanghai acquires German circular knitting machinery maker Terrot (c) Santoni / Terrot
13.09.2023

Santoni Shanghai acquires German circular knitting machinery maker Terrot

Santoni Shanghai Knitting Machinery Co., Ltd. announced the strategic acquisition of Terrot GmbH, a manufacturer of circular knitting machines based in Chemnitz, Germany. The move comes as the latest development in Santoni Shanghai’s long-term vision to build an ecosystem that aims to reshape and consolidate the circular knitting industry. The transaction will be finalized pending approval from Chinese regulatory authorities.

The global circular knitting machine market is expected to see significant growth in the coming years, with a July 2023 report from Consegic Business Intelligence forecasting a 5.7% CAGR from 2023 to 2030, propelled by an increasing consumer preference for breathable and comfortable knitted fabrics as well as increasingly diversification of demand for knitted apparel. To seize this market opportunity, Santoni Shanghai has developed an ambitious strategic plan centered around innovation, sustainability and digitalization. The new partnership with Terrot aims to further this strategy by enhancing Santoni’s integrated and scaled-up ecosystem, while also driving the sustainable development of the global knitting machinery industry.

Santoni Shanghai Knitting Machinery Co., Ltd. announced the strategic acquisition of Terrot GmbH, a manufacturer of circular knitting machines based in Chemnitz, Germany. The move comes as the latest development in Santoni Shanghai’s long-term vision to build an ecosystem that aims to reshape and consolidate the circular knitting industry. The transaction will be finalized pending approval from Chinese regulatory authorities.

The global circular knitting machine market is expected to see significant growth in the coming years, with a July 2023 report from Consegic Business Intelligence forecasting a 5.7% CAGR from 2023 to 2030, propelled by an increasing consumer preference for breathable and comfortable knitted fabrics as well as increasingly diversification of demand for knitted apparel. To seize this market opportunity, Santoni Shanghai has developed an ambitious strategic plan centered around innovation, sustainability and digitalization. The new partnership with Terrot aims to further this strategy by enhancing Santoni’s integrated and scaled-up ecosystem, while also driving the sustainable development of the global knitting machinery industry.

“With the strategic investment of Santoni, we aim to strengthen our position as the preferred solution provider to many of the world’s leading textile manufacturers and top brands as well as continue working with industry talents as we provide valuable and essential know-how to drive premium ‘Made in Germany’ textile machinery.” said Robert Czajkowski, Managing Director of Terrot GmbH. "We have found a strong, globally active partner with clear dedication to quality, performance and excellent expertise in all circular knitting segments, who understands the unique value proposition and potentials of our portfolio and with whom we can realize our growth objectives” he added.

Source:

Terrot GmbH

A Dress For Venice 2023 Illustration by Jacopo Ascari for A Dress For Venice 2023
05.09.2023

A Dress For Venice - Debut at the International Film Festival

The project "A Dress For Venice" get on the Red Carpet at the Venice Film Festival to advocate for sustainability. September 7th, actress Margot Sikabonyi will wear a dress from the collection designed by conscious designer Tiziano Guardini, illustrated by artist Jacopo Ascari, and produced by Martina Vidal Venezia, with the following materials:

  • Bemberg™: The innovative and biodegradable fiber from the Japanese company Asahi Kasei.
  • Burano lace: Produced by the historic Martina Vidal Venezia for four generations.

"Returning to Venice and experiencing the emotions of this place and the artists who have enriched it is exhilarating," says Tiziano Guardini. "It's a work based on volumes, shapes, three-dimensionality, colours and materials research… from Mariano Fortuny to the Ottoman Empire's Turcherie."

Illustrator Ascari adds, "I started with a careful study of the works of Canaletto, Guardi and Bellotto, masterpieces of Eighteenth-Century Vedutismo. I portrayed new perspectives on the city's splendour, enhanced by Guardini's vibrant shapes and color choices."

The project "A Dress For Venice" get on the Red Carpet at the Venice Film Festival to advocate for sustainability. September 7th, actress Margot Sikabonyi will wear a dress from the collection designed by conscious designer Tiziano Guardini, illustrated by artist Jacopo Ascari, and produced by Martina Vidal Venezia, with the following materials:

  • Bemberg™: The innovative and biodegradable fiber from the Japanese company Asahi Kasei.
  • Burano lace: Produced by the historic Martina Vidal Venezia for four generations.

"Returning to Venice and experiencing the emotions of this place and the artists who have enriched it is exhilarating," says Tiziano Guardini. "It's a work based on volumes, shapes, three-dimensionality, colours and materials research… from Mariano Fortuny to the Ottoman Empire's Turcherie."

Illustrator Ascari adds, "I started with a careful study of the works of Canaletto, Guardi and Bellotto, masterpieces of Eighteenth-Century Vedutismo. I portrayed new perspectives on the city's splendour, enhanced by Guardini's vibrant shapes and color choices."

On Thursday, September 7th, at 12:30, in the Veneto Region's room at the Hotel Excelsior on Lido, Elena Donazzan, Councilor for Education, Training, Employment, and Equal Opportunities, will present the project alongside its creators Laura Scarpa and Lorenzo Cinotti of Venezia da Vivere, designer Tiziano Guardini, artist Jacopo Ascari, and actress Margot Sikabonyi.

"We conceived A Dress For Venice for Homo Faber in 2019, to celebrate Venice's 1600 years of craftsmanship," explains Laura Scarpa. "This year, the research extends to sustainable innovation thanks to an international team of designers, artisans and companies," continues Lorenzo Cinotti.

The project reaffirms Venice's role as an international laboratory to reflect on the planet's future. "A Dress For Venice" is a limited-edition collection realized with the support of a network of companies identified by the Tavolo Veneto della Moda (Confartigianato, CNA, Confindustria, Confesercenti and Confcommercio of Veneto), the global platform C.L.A.S.S. (Creativity Lifestyle and Sustainable Synergy), the partnership of Camera Buyer Italia and the media partnership of The Italian Rêve.

The presentation of the collection to buyers will take place at the Marina Guidi showroom in mid-September, while it will have its dedicated exhibition on Friday, October 20th, during the Venice Fashion Week.

"A Dress for Venice" is endorsed by the Comune di Venezia, the Regione del Veneto, and Homo Faber - Fondazione Cologni dei Mestieri d’Arte, which promotes worldwide high craftsmanship and savoir-faire.

Partners in the project Infinity srl and Tessitura Grisotto, renowned Italian textile manufacturers who expertly craft Bemberg™ fiber into exquisite fabrics. Creazioni Digitali, a specialized company in sublimation digital printing, carries out the prints on Bemberg™ textiles with its unique project GreenDrop; with inks that reduces the water consumption.

Other partners include Marina Iremonger, Camera Buyer Italia, and the Tavolo Veneto della Moda, representing Confartigianato, CNA, Confindustria, Confcommercio, and Confesercenti.

More information:
Venice Asahi Kasei Bemberg™
Source:

C.L.A.S.S. Eco Hub