Textination Newsline

• Bcomp wins BMW Group Supplier Innovation Award in the category “Newcomer of the Year”

The sixth BMW Group Supplier Innovation Awards were presented at the BMW Welt in Munich on 17 November 2022. The coveted award was presented in a total of six categories: powertrain & e-mobility, sustainability, digitalisation, customer experience, newcomer of the year and exceptional team performance.

Bcomp won the BMW Group Supplier Innovation Award in the Newcomer of the Year category. Following a successful collaboration with BMW M Motorsport for the new BMW M4 GT4 that extensively uses Bcomp’s powerRibs™ and ampliTex™ natural fibre solutions and BMW iVentures recently taking a stake in Bcomp as lead investor in the Series B round, this award is another major step and recognition on the path to decarbonizing mobility.

“Innovations are key to the success of our transformation towards electromobility, digitalisation and sustainability. Our award ceremony recognises innovation and cooperative partnership with our suppliers – especially in challenging times,” said Joachim Post, member of the Board of Management of BMW AG responsible for Purchasing and Supplier Network at the ceremony held at BMW Welt in Munich.

BMW first started to work with Bcomp’s materials in 2019 when they used high-performance natural fibre composites in the BMW iFE.20 Formula E car. From this flax fibre reinforced cooling shaft, the collaboration evolved and soon after, the proprietary ampliTex™ and powerRibs™ natural fibre solutions were found successfully substituting selected carbon fibre components in DTM touring cars from BMW M Motorsport. By trickling down and expanding into other vehicle programs, such developments highlight the vital role that BMW M Motorsports plays as a technology lab for the entire BMW Group. This continues in the form of the latest collaboration with Bcomp to include a higher proportion of renewable raw materials in the successor of the BMW M4 GT4.

With the launch of the new BMW M4 GT4, it will be the serial GT car with the highest proportion of natural fibre components. Bcomp’s ampliTex™ and powerRibs™ flax fibre solutions can be found throughout the interior on the dashboard and centre console, as well as on bodywork components such as the hood, front splitter, doors, trunk, and rear wing. Aside from the roof, there are almost no carbon fibre reinforced plastic (CFRP) components that were not replaced by the renewable high-performance flax materials. “Product sustainability is increasing in importance in the world of motorsport too,” says Franciscus van Meel, Chairman of the Board of Management at BMW M GmbH.

Bcomp is a leading solutions provider for natural fibre reinforcements in high performance applications from race to space.

The company started as a garage project in 2011 with a mission to create lightweight yet high performance skis. The bCores™ were launched and successfully adopted by some of the biggest names in freeride skiing. The founders, material science PhDs from École Polytechnique Fédérale de Lausanne (EPFL), used flax fibres to reinforce the balsa cores and improve shear stiffness. Impressed by the excellent mechanical properties of flax fibres, the development to create sustainable lightweighting solutions for the wider mobility markets started.

Flax is an indigenous plant that grows naturally in Europe and has been part of the agricultural history for centuries. It requires very little water and nutrients to grow successfully. In addition, it acts as a rotational crop, thus enhancing harvests on existing farmland. Neither cultivation nor processing of the flax plants requires any chemicals that could contaminate ground water and harvesting is a completely mechanical process. After harvesting the entire flax plant can be used for feed, to make oil and its fibres are especially used for home textiles and clothing. The long fibre that comes from the flax plant possesses very good mechanical properties and outstanding damping properties in relation to its density, making it especially suited as a natural fibre reinforcement for all kinds of polymers.

The harvesting and processing of flax takes place locally in the rural areas it was grown in. Using European flax sourced through a well-established and transparent supply chain it allows to support the economic and social structure in rural areas thanks to the large and skilled workforce required to sustain the flax production. When it comes to the production of technical products like the powerRibs™ reinforcement grid, Bcomp is investing in local production capacities close to its headquarters in the city of Fribourg, Switzerland, thus creating new jobs and maintaining technical know-how in the area. The production is built to be as efficient as possible and with minimal environmental impact and waste.

Further strengthening the local economy, Bcomp aims to hire local companies for missions and with the headquarters being located in Fribourg’s “Blue Factory” district, Bcomp can both benefit from and contribute to the development of this sustainable and diverse quarter.

3D printing has been in use in architecture for a while, and now it is to become ecologically sustainable as well: Together with partners, the LZH is researching how to produce individual building elements from natural fibers using additive manufacturing.

In the project 3DNaturDruck, architectural components such as facade elements shall be created from natural fiber-reinforced biopolymers in 3D printing. To this end, the scientists will develop the corresponding composite materials from biopolymers with both natural short fibers and natural continuous fibers and optimize them for processing with the additive manufacturing process FDM (Fused Deposition Modeling). The project partners' goal is to enable smart and innovative designs that are both ecological and sustainable.
 
The goal: highly developed components made from sustainable materials
Within the project, different natural fiber-reinforced biopolymer composites will be investigated. The partners are researching both processing methods with very short natural fibers, such as from wood and straw, and a method for printing continuous fibers from hemp and flax in combination with biopolymers. The LZH then develops processes for these new materials and adapts the tools and nozzle geometries of the FDM printer. A pavilion with the 3D-printed facade elements is planned as a demonstrator on the campus of the University of Stuttgart.
 
The project partners want to explore how additive manufacturing can be used to simplify manufacturing processes for architectural components. Natural fiber-reinforced biopolymers are particularly suitable for producing components with complex geometries in just a few steps and with low material and cost requirements. With their research, the partners are also working on completely new starting conditions for the fabrication of newly developed architectural components: For example, the topology optimization of components according to their structural stress can be easily implemented with additive manufacturing.

Enabling the natural fiber trend in architecture also using additive manufacturing
There is great interest in the use of natural fibers in structural components in architecture and construction because natural fibers have several advantages. They have good mechanical properties combined with low weight and are widely available. As a renewable resource with in some cases very short renewal cycles, they are also clearly a better ecological alternative than synthetic fibers.

In additive manufacturing, large-format elements for the architectural sector have so far mostly been manufactured with polymers based on fossil raw materials. Research in the project 3DNaturDruck should now make the use of natural fibers in architecture possible for additive manufacturing as well.

About 3DNaturDruck
The project 3DNaturDruck is about the design and fabrication of 3D-printed components made of biocomposites using filaments with continuous and short natural fibers.

The project is coordinated by the Department of Biobased Materials and Materials Cycles in Architecture (BioMat) at the Institute of Building Structures and Structural Design (ITKE) at the University of Stuttgart. In addition to the LZH, project partners include the Fraunhofer Institute for Wood Research Wilhelm-Klauditz-Institut (WKI) and the industrial companies Rapid Prototyping Technologie GmbH (Gifhorn), ETS Extrusionstechnik (Mücheln), 3dk.berlin (Berlin) and ATMAT Sp. Z o.o. (Krakow, Poland).

The project is funded by the German Federal Ministry of Food and Agriculture through the Fachagentur Nachwachsende Rohstoffe e.V. under the funding code 2220NR295C.

The fashion industry is massively influenced by the change in social values. Which trends can be observed and in which direction is the fashion future developing - an excerpt from the Retail Report 2023¹ by Theresa Schleicher.

The fashion industry has been slowed down by the global health pandemic and further affected by the measures taken in the wake of the Ukraine war: Fragile supply chains, increased transportation and energy costs, and rising prices are having an impact on the globalized fashion industry. Those who were moving the fastest are being hit the hardest. Fast fashion based on the principle of "faster and faster, cheaper and cheaper, more and more" - which has been in the fast lane for years - is now experiencing an unprecedented crash. Even without these momentous events, the fashion system would have reached its limits. What could have developed evolutionarily is now being revolutionized. Now and in the future, it will be particularly difficult for brands and retail companies that do not have a sharp profile or that have lost many customers in the attempt to offer mass-produced goods at prices that are still lower than those of their competitors.

New value paradigm in society - also for fashion
While fashion retailers and fashion brands are focusing on expanding online and have been putting their foot on the gas pedal since the corona pandemic at the latest, a parallel change in values is taking place in society. Many behaviors that have been practiced, tested and lived for months will continue to shape our consumer behavior and lifestyles in the future. The uncertainty in society as well as a shrinking economy and rising consumer prices as a result of the Ukraine war will further contribute to this shift in values.

The old paradigm was "primarily shaped by pragmatic factors such as price, quantity, safety and convenience, so consumer behavior was predominantly based on relatively simple cost-benefit calculations." The new value paradigm, on the other hand, is more strongly influenced by "soft factors". For example, the quality of a product is defined more holistically. In addition to price, "ecological, [...] ethical and social aspects are also taken into account. It is about positive or negative experiences that one has had with producers and about the visions that they pursue with their companies". This new value paradigm is forcing the large chain stores in particular to rethink. They have to develop their business models further in the direction of sustainability, transparency and responsibility - and show attitude. The influence of the neo-ecology megatrend combined with the push towards the sense economy is reshuffling the cards in the fashion industry.

The most important driver for the change in consumer behavior is climate protection, which is also becoming personally more important to more and more people because they are feeling the effects of climate change themselves in their everyday lives. The transition to a sustainable, bio-based and circular economy is accompanied by fundamental changes in the technical, economic and social environment.

Circular fashion as an opportunity for fast fashion
The development of the fashion industry - especially the fast fashion industry - towards a more circular economy is not a short-term trend, but one of the most long-term and at the same time forward-looking trends in retailing of all.

Even before the pandemic, a growing proportion of consumers placed value on sustainably produced clothing instead of constantly shopping the latest trends. A reset is needed, but the fashion industry faces a difficult question: How can it respond to the demand for new trends without neglecting its responsibility for the environment?

The solution for reducing emissions and conserving raw materials and resources seems obvious: produce less. On average, 2,700 liters of water are needed to produce a T-shirt - that much drinking water would last a person for two and a half years. In Europe, each person buys an average of 26 kilograms of textiles per year - and disposes eleven kilograms. Of this, almost 90 percent is incinerated or ends up in landfills. Overproduction, precarious working conditions during production and the use of non-sustainable materials are the major problems of the fast fashion industry. It is time to slow down fast fashion.

Fashion recycling by Design & Recycling as a Service
A first step towards keeping fashion and textiles in the cycle for longer is to recycle materials properly. In the future, recycling must be considered as early as the design stage - not only for sustainably produced fashion, but also for fast fashion. The H&M Group, for example, developed the Circulator for this purpose: The digital evaluation tool guides the designer through materials, components and design strategies that are best suited for the product depending on its purpose, and evaluates them in terms of their environmental impact, durability and recyclability.

However, more and more young companies are specializing in offering recycling for textiles as a service. They work directly with fashion retailers or fashion brands to enable the best possible recycling, re-circulation or even upcycling. Until now, it has not been worthwhile for large textile companies to invest in their own recycling systems. But Recycling as a Service is a market of the future, led by innovative start-ups such as Resortecs that are tackling previous hurdles in our recycling system. In the future, more and more new service providers will pop up around returns and recycling and help fashion retailers to align their material cycles more sustainably.

Secondhand conquers the fast fashion market
Another way to extend the life of clothing is to pass it on to new users. We are witnessing the triumph of vintage, retro and more - chic secondhand stores and chains like Resales and Humana are popping up everywhere. The renaming of secondhand to pre-owned or pre-loved also illustrates the increased appreciation of worn clothing. The trend toward secondhand also pays off economically for companies: The number of platforms whose business model revolves around the resale of clothing is increasing, and secondhand fashion is arriving in the middle of society. The luxury segment and especially vintage fashion are stable in price because the availability of these unique pieces is limited. Fast fashion, on the other hand, is available in sufficient quantities and is particularly interesting for price-sensitive customers, as secondhand is considered one of the most sustainable forms of consumption - meaning that fashion can be shopped with a clear conscience - and is usually even offered at a lower price than new goods. The second-hand market will continue to professionalize and become more socially acceptable. As a result, the fast fashion industry will also be forced to produce higher quality clothing in order to become or remain part of the circular system.

Slow fashion gains momentum thanks to technology
The development and orientation of fast fashion towards circular processes is also changing sustainable fashion. In the future, fast fashion and slow fashion can learn from each other to fully exploit their potential: fast fashion will become more sustainable, while slow fashion will focus on faster availability and delivery and make the customer experience as pleasant as possible. Fast and slow fashion are no longer compelling opposites - because the sustainable fashion movement can also benefit from technological innovations that are being established above all by the fashion platforms, and lift slow fashion to a new level.

At the same time, Sustainable Luxury is a new form of luxury consumption - especially in the field of designer fashion, sustainability is becoming the all-important criterion. Sustainability as a means of distinction for true luxury and sustainability as a basic prerequisite for a functioning fashion industry are increasingly converging. This is where the transition between a slowdown of fast fashion and an acceleration of slow fashion takes place.

Trend Sustainable Luxury
Luxury is defined less and less by the object and its possession and is increasingly becoming an expression of one's own lifestyle and values. Consumers' understanding of premium and luxury has changed - not least driven by the neo-ecology megatrend. In the future, it will no longer be just about owning something as expensive and ostentatious as possible. What began as a rebellion against careless consumption of luxury brands that promise high-end products but accept unfair and environmentally damaging manufacturing conditions in the process has increasingly become accepted as a value attitude. Luxury products have no less a claim than to improve the world.

Sustainable and ethical products and services made from innovative materials that have the power to solve problems and make the world a better place. At the same time, this highly ethically and morally charged form of sustainability is turning into a means of distinction: For the materials are so new, the manufacturing processes still so experimental, that the products are unique and often only available in very small quantities or on order. And this exclusive sustainability naturally comes at a price. After all, a company that pursues a mission is not concerned with simply cutting costs - certainly not at the expense of others or the environment. Instead of leather and fur, luxury fashion is now made from oranges, pineapples, hemp, cacti: there are more and more new, innovative and sustainable materials from which unique garments and accessories can be made.

Predictive, Pre-Order & Made-to-Order
Artificial intelligence and Big Data analysis can help predict fashion demand. Fast fashion leaders like Shein are characterized by agile production which is supported by AI algorithms for trend prediction fed with data from TikTok and other social media services. This could sustainably reduce overproduction and unsaleable goods in the future. As critical as Shein's practices are, the automation of processes also offers immense opportunities for a more sustainable fashion industry, as production only starts when goods are in demand.

AI support in the design process can be used to produce more sustainable fashion - and make it available more quickly. In a future of an avatar economy and in the world of virtual influencers, it may even be possible to dispense with part of the production process: Fashion will remain virtual - and thus more resource-efficient. Digital fashion will become increasingly important as the metaverse is built.

5 Key Takeaways on the Future of Fashion

1. The current crisis in the fashion industry is an opportunity to move more in the direction of circular fashion. Above all, the new value paradigm in society, understanding quality more holistically and consuming more mindfully, is providing a push towards fairer, more ecological and more social fashion. Fast fashion and sustainability are not mutually exclusive.
2. There are already first approaches to keep fast fashion in the cycle longer or to return it to the cycle. One important development is to consider recycling or reuse as early as the design and manufacturing process - known as recycling by design. In addition, there is a growing number of start-ups specializing in the optimized recycling of textiles and cooperating with major fashion players.
3. Above all, the booming online trade in used fashion, often communicated as the pre-loved or pre-owned category, is making secondhand respectable for the mainstream. Such fashion, with a story and an aura of uniqueness, is also a cost-effective but more sustainable alternative to fast fashion.
4. But slow fashion is also changing, especially due to the dominance of new technologies. Slow fashion can also benefit from processes that are currently manifesting themselves in the online fashion market, such as fast delivery or pre-order services. Slow fashion thus becomes more convenient, better and faster available. It will be easier for sustainably oriented fashion enthusiasts to consume according to their values and attitudes.
5. The trend toward sustainable luxury continues: Sustainability as a means of distinction for a new form of luxury enables alternative manufacturing processes and innovative materials in the luxury fashion market. These are being showcased by an avant-garde and, if they prove successful, adapted by fast fashion.

¹ https://onlineshop.zukunftsinstitut.de/shop/retail-report-2023/

MAI Scrap SeRO | From Scrap to Secondary Ressources – Highly Orientated Wet-Laid-Nonwovens from CFRP-Waste

The »Scrap SeRO« project is an international joint project in the field of »recycling of carbon fibers«.

The technical project goal is the demonstration of a continuous process route for processing pyrolytically recycled carbon fibers (rCF) in high-performance second-life component structures. In addition to the technological level, the focus of the project is particularly on the international transfer character, in the sense of a cross-cluster initiative between the top cluster MAI Carbon (Germany) and CVC (South Korea).

Through direct cooperation between market-leading companies and research institutions of the participating cluster members, the technical project processing takes place in the context of the global challenge of recycling, as well as the need for increased resource efficiency, with reference to the economically strategic material carbon fibers.

Efficient processing of recycled carbon fibers
The technological process route within the project runs along the industrial wet-laying technology, which is comparable to classic paper production. This enables a robust production of high-quality rCF nonwovens, which are characterized, among other things, by particularly high homogeneity and stability of characteristic values.

A special development focus is on a specific process control, which allows the generation of an orientation of the individual fiber filaments in the nonwoven material.

The given preferred fiber direction of the discontinuous fiber structure opens up strong synergy effects in relation to increased packing densities, i.e. fiber volume content, as well as a significantly optimized processing behavior in relation to impregnation, forming and consolidation, in addition to a load path-oriented mechanics.

The innovative wetlaid nonwovens are then further processed into thermoset and thermoplastic semi-finished products, i.e. prepregs or organosheets, using impregnation processes that are suitable for large-scale production.

rCF tapes are produced from this in an intermediate slitting step. By means of automated fiber placement, load path-optimized preforms can be deposited, which are then consolidated into complex demonstrator components.

The process chain is monitored at key interfaces by innovative non-destructive measurement technology and supplemented by extensive characterization methods. Especially for the processing of pyrolysed recycled carbon fibers, which were recovered from end-of-life waste or PrePreg waste, for example, there are completely new potentials with significant added value compared to the current state of the art for the overall process route presented here.

International Transfer
The fundamentally global challenge of recycling and the striving for increased sustainability is strongly influenced by national recycling strategies as a result of country-specific framework conditions. The globalized way in which companies deal with high-volume material flows places additional demands on a functioning circular economy. A networked solution can only be created on the basis of and in compliance with the respective guidelines and structural factors.

In the case of the high-performance material carbon fiber, there is a particularly high technical requirement for an ecologically and economically viable recycling industry. At the same time, the specific market size already opens up interesting scaling effects and potential for market penetration.

The Scrap SeRO project connects two of the world's leading top clusters in the field of carbon composites from South Korea and Germany on the basis of a cross-cluster initiative. As part of this first promising technology project, the foundation stone for future cooperation is to be laid that supports the effective recycling of carbon fibers. The project makes an important contribution to closing the material cycle for carbon fibers and thus paves the way for renewed use in further life cycles of this high-quality and energy-intensive material.

Info »Scrap SeRO«

• Duration: 05/2019 – 04/2022
• Funding: BMBF
• Funding Amount: 2.557.000 €

National Consortium

• Fraunhofer Institute for Casting, Composite and Processing Technology IGCV
• ELG Carbon Fibre
• J.M. Voith SE & Co. KG
• Neenah Gessner
• SURAGUS GmbH
• LAMILUX Composites GmbH
• Covestro Deutschland AG
• BA Composites GmbH
• SGL Carbon

International Consortium

• KCarbon
• Hyundai
• Sangmyung University
• TERA Engineering

More and more sports and fashion brands are setting themselves the goal of becoming climate neutral within the next few years, on a corporate as well as product level. The CO₂ balance serves as the gateway to sustainable apparel and for more transparency for the consumer.

This process begins with the materials supplied by textile producers, requiring knowledge of the amount of CO₂ emitted during production. By evaluating and quantifying CO₂ emissions, the industry gains in transparency and can turn to more sustainable options.

In close collaboration with sustainability insights platform Higg and partners such as Climate Partner, PERFORMANCE DAYS Munich and Functional Fabric Fair by PERFORMANCE DAYS Portland seek targeted answers to the question, “How can we cut down on CO₂ emissions?” as part of its roadmap over the next three fairs. The Focus Topic “The Journey to Carbon Neutrality” will therefore highlight materials and fibers that provide solutions on how to produce and reprocess materials in the future in a climate-friendly manner, kicking off at the spring trade fair, to be held at the Oregon Convention Center in Portland on April 4-5, 2022, at the Munich’s Exhibition Center on April 27-28, 2022, continuing through the winter fair in October/November and culminating at the Spring 2023 fair.

When the conversation turns to environmental protection and climate change these days, the term CO₂ neutrality is also often mentioned in connection with CO₂ emissions and CO₂ reduction. Yet what exactly does CO₂ neutrality mean? Climate neutrality implies achieving a balance between carbon emissions themselves and the absorption of carbon in the atmosphere into carbon sinks. To achieve net zero emissions, all greenhouse gas emissions worldwide must be offset by carbon sequestration. The fashion and sportswear industries are among the world’s highest emitters of CO₂.

If one wishes to examine their emissions across all stages of the value chain, it is worth looking beyond raw materials, production, logistics and trade. Consumer behavior can also influence emissions: According to the “Fashion on Climate” report published by the Global Fashion Agenda and McKinsey at the end of August 2020, even greater leverage lies in the products themselves: 61 percent of reductions in emissions could be achieved through CO₂ reductions in material production and processing, by minimizing production and manufacturing waste, and in the manufacturing of garments. By 2030, that would account for around 1 billion tons annually. And last but not least, consumer behavior is also a factor that impacts the fashion industry’s climate footprint. If even more attention is paid to sustainable clothing, and if it is reused and worn longer, this can lead to a reduction in emissions of up to 347 million tons, according to the report.

A pioneering example on the road to sustainability was PERFORMANCE DAYS’ decision to only present sustainable materials at the PERFORMANCE FORUM from the trade fair event in November 2019 onwards. And from the upcoming Spring Fair onwards, the sustainable approach will be heightened further. Within the framework of this roadmap, the new Focus Topic is intended to accompany exhibitors on their way to climate neutrality over the course of three fairs. In doing so, PERFORMANCE DAYS and Functional Fabric Fair are pursuing a 3-step plan.  

• Step 1, April 2022: The focus of the upcoming fair will be on CO₂-reducing technologies and the measuring of a product’s carbon footprint.
• Step 2, November 2022: Within the entire Focus Topic product category, only products that indicate CO₂ emissions caused during production will be shown. This contributes to more transparency and comparability in the industry.
• Step 3, April 2023: The PERFORMANCE FORUM will present the amount of CO₂ emitted by each individual product. Furthermore, approaches to solutions will be shown as to how CO₂ released during the manufacturing of materials can be offset and further reduced.

For the best possible implementation and presentation of the new Focus Topic, PERFORMANCE DAYS and Functional Fabric Fair trust in collaborators: Higg and Climate Partner – amongst others – will accompany the next three fairs. The Higg Materials Sustainability Index (Higg MSI) is considered the leading tool for assessing the environmental impact of materials in the apparel, footwear and textile industries. The Higg MSI is able to calculate the environmental impact of millions of possible material manufacturing variants. A packaging library has also been added to assist in making sustainable decisions for packaging. The Higg Index is neither a certificate nor a label, but rather an important self-assessment tool that textile companies can utilize internally to be able to identify and improve environmental and social issues throughout their value chain.

Climate Partner, on the other hand, seeks solutions for climate protection: This involves the balancing of CO₂ emissions – which in turn are to offset the emissions of companies with recognized climate protection projects in order to make products, services and companies climate neutral. Climate Partner also sees itself as an advisor to companies on their climate protection strategies. Together, the aim is to work on reducing CO₂ emissions and to support climate protection projects that benefit the everyday lives of people in developing countries. 

From the perspective of European consumption, textiles have on average the fourth highest negative life cycle impact on the environment and climate change, after food, housing and mobility. A shift to a circular textile production and consumption system with longer use, and more reuse and recycling could reduce those impacts along with reductions in overall consumption. One important measure is circular design of textiles to improve product durability, repairability and recyclability and to ensure the uptake of secondary raw materials in new products.

Key messages

• In 2019, the EU textile and clothing sector had a turnover of EUR162 billion, employing over 1.5 million people across 160,000 companies. As was the case in many sectors, between 2019 and 2020, the COVID-19 crisis decreased turnover by 9% for textiles as a whole and by 17% for clothing.
• In 2020, textile consumption in Europe had on average the fourth highest impact on the environment and climate change from a global life cycle perspective. It was the consumption area with the third highest impact on water and land use, and the fifth highest in terms of raw material use and greenhouse gas emissions.
• To reduce the environmental impacts of textiles, a shift towards circular business models, including circular design, is crucial. This will need technical, social and business model innovation, as well as behavioural change and policy support.
• Circular design is an important enabler of the transition towards sustainable production and consumption of textiles through circular business models. The design phase plays a critical role in each of the four pathways to achieving a circular textile sector: longevity and durability; optimised resource use; collection and reuse; and recycling and material use.

Textiles are identified as a key value chain in the EU circular economy action plan and will be addressed in the forthcoming European Commission’s 2022 EU strategy for sustainable and circular textiles and EU sustainable products initiative. This briefing aims to improve our understanding of the environmental and climate impacts of textiles from a European perspective and to identify design principles and measures to increase circularity in textiles. It is underpinned by a report from the EEA’s European Topic Centre on Circular Economy and Resource Use available here.

1. Production, trade and consumption of textiles
Textiles is an important sector for the EU economy. In 2019, the EU textile and clothing sector had a turnover of EUR162 billion, employing over 1.5 million people in 160,000 companies. As was the case for many sectors, between 2019 and 2020, the COVID-19 health and economic crisis decreased turnover by 9% for textiles as a whole and by 17% for clothing (Euratex, 2021).

In 2020, 6.9 million tonnes of finished textile products were produced in the EU-27. EU production specialises in carpets, household textiles and other textiles (including non-woven textiles, technical and industrial textiles, ropes and fabrics). In addition to finished products, the EU produces intermediate products for textiles, such as fibres, yarns and fabrics (Köhler et al., 2021).

The textiles sector is labour intensive compared with others. Almost 13 million full-time equivalent workers were employed worldwide in the supply chain to produce the amount of clothing, textiles and footwear consumed in the EU-27 in 2020. This makes the textiles sector the third largest employer worldwide, after food and housing. Most production takes place in Asia, where low production costs come at the expense of workers’ health and safety.
 
Textiles are highly globalised, with Europe being a significant importer and exporter. In 2020, 8.7 million tonnes of finished textile products, with a value of EUR125 billion, were imported into the EU-27. Clothing accounts for 45% of imports in terms of volume, followed by household textiles, other textiles and footwear (Eurostat, 2021a). The EU imports mainly from China, Bangladesh and Turkey, and exports mainly to the United Kingdom, Switzerland and the United States (Euratex, 2020).

Consumption
European households consume large amounts of textile products. In 2019, as in 2018, Europeans spent on average EUR600 on clothing, EUR150 on footwear and EUR70 on household textiles (Köhler et al., 2021; Eurostat, 2021b).

The response to the COVID-19 pandemic, involving stay-at-home measures and the closure of companies and shops, decreased textile production and demand overall (Euratex, 2021). As a result, the consumption of clothing and footwear per person decreased in 2020, relative to 2019, while the consumption of household textiles slightly increased. Average textile consumption per person amounted to 6.0kg of clothing, 6.1kg of household textiles and 2.7kg of shoes in 2020 (see Figure 1).

Apart from this COVID-related drop in consumption in 2020, the estimated consumption of clothing and footwear stayed relatively constant over the last decade, with slight fluctuations between years (see Figure 2). Similarly, the consumption of household textiles was also relatively steady, with a slight increase over the decade.

When calculating the ‘estimated consumption’ based on production and trade data from 2020, and excluding industrial/technical textiles and carpets, total textile consumption is 15kg per person per year, consisting of, on average:

• 6.0kg of clothing
• 6.1kg of household textiles
• 2.7kg footwear.

For 2020, this amounts to a total consumption of 6.6 million tonnes of textile products in Europe. Textile consumption estimates are uncertain, as they vary by study, often using different scopes and calculation methods.

2. Environmental and climate impacts of textiles
The production and consumption of textiles has significant impacts on the environment and climate change. Environmental impacts in the production phase result from the cultivation and production of natural fibres such as cotton, hemp and linen (e.g. use of land and water, fertilisers and pesticides) and from the production of synthetic fibres such as polyester and elastane (e.g. energy use, chemical feedstock) (ETC/WMGE, 2021b). Manufacturing textiles requires large amounts of energy and water and uses a variety of chemicals across various production processes. Distribution and retail are responsible for transport emissions and packaging waste.

During use and maintenance — washing, drying and ironing — electricity, water and detergents are used. Chemicals and microfibres are also emitted into the waste water. Meanwhile, textiles contribute to significant amounts of textile waste. At the end of their life, textiles often end up in general waste and are incinerated or landfilled. When textile waste is collected separately, textiles are sorted and reused, recycled or disposed of, depending on their quality and material composition. In 2017, it was estimated that less than 1% of all textiles worldwide are recycled into new products (Ellen MacArthur Foundation, 2017).

To illustrate the magnitude of the impacts of textile consumption on raw material use, water and land use and greenhouse gas emissions compared with other consumption categories, we have updated our calculations of the life cycle environmental and climate impacts in the EU. We used input-output modelling based on data from the Exiobase database and Eurostat. In line with the reduced textile consumption level in 2020 because of the COVID-19 pandemic, the environmental impacts decreased from 2019 to 2020.

Raw material use
Large amounts of raw materials are used for textile production. To produce all clothing, footwear and household textiles purchased by EU households in 2020, an estimated 175 million tonnes of primary raw materials were used, amounting to 391kg per person. Roughly 40% of this is attributable to clothes, 30% to household textiles and 30% to footwear. This ranks textiles as the fifth highest consumption category in Europe in terms of primary raw material use (see Figure 3).

The raw materials used include all types of materials used in producing natural and synthetic fibres, such as fossil fuels, chemicals and fertilisers. It also includes all building materials, minerals and metals used in the construction of production facilities. Transport and retail of the textile products are included as well. Only 20% of these primary raw materials are produced or extracted in Europe, with the remainder extracted outside Europe. This shows the global nature of the textiles value chain and the high dependency of European consumption on imports. This implies that 80% of environmental impacts generated by Europe’s textile consumption takes place outside Europe. For example, cotton farming, fibre production and garment construction mostly take place in Asia (ETC/WMGE, 2019).

Water use
Producing and handling textiles requires large quantities of water. Water use distinguishes between ‘blue’ water (surface water or groundwater consumed or evaporated during irrigation, industry processes or household use) and ‘green’ water (rain water stored in the soil, typically used to grow crops) (Hoekstra et al., 2012).

To produce all clothing, footwear and household textiles purchased by EU households in 2020, about 4,000 million m³ of blue water were required, amounting to 9m³ per person, ranking textiles’ water consumption in third place, after food and recreation and culture (see Figure 4).

Additionally, about 20,000 million m³ of green water was used, mainly for producing cotton, which amounts to 44m³ per person. Blue water is used fairly equally in producing clothing (40%), footwear (30%) and household and other textiles (30%). Green water is mainly consumed in producing clothing (almost 50%) and household textiles (30%), of which cotton production consumes the most.

Water consumption for textiles consumed in Europe mostly takes place outside Europe. It is estimated that producing 1kg of cotton requires about 10m³ of water, typically outside Europe (Chapagain et al., 2006).

Land use
Producing textiles, in particular natural textiles, requires large amounts of land. The land used in the supply chain of textiles purchased by European households in 2020 is estimated at 180,000 km², or 400m² per person. Only 8% of the land used is in Europe. Over 90% of the land use impact occurs outside Europe, mostly related to (cotton) fibre production in China and India (ETC/WMGE, 2019). Animal-based fibres, such as wool, also have a significant land use impact (Lehmann et al., 2018). This makes textiles the sector with the third highest impact on land use, after food and housing (see Figure 5). Of this, 43% is attributable to clothes, 35% to footwear (including leather shoes, which have a high land use impact because of the need for cattle pasture) and 23% to household and other textiles.

Greenhouse gas emissions
The production and consumption of textiles generate greenhouse gas emissions, in particular from resource extraction, production, washing and drying, and waste incineration. In 2020, producing textile products consumed in the EU generated greenhouse gas emissions of 121 million tonnes carbon dioxide equivalent (CO₂e) in total, or 270kg CO₂e per person. This makes textiles the household consumption domain responsible for the fifth largest impact on climate change, after housing, food, transport and mobility, and recreation and culture (see Figure 6). Of this, 50% is attributable to clothes, 30% to household and other textiles, and 20% to footwear. While greenhouse gas emissions have a global effect, almost 75% are released outside Europe, mainly in the important textile-producing regions in Asia (ETC/WMGE, 2019).

About 80% of the total climate change impact of textiles occurs in the production phase. A further 3% occurs in distribution and retail, 14% in the use phase (washing, drying and ironing), and 3% during end of life (collection, sorting, recycling, incineration and disposal) (ECOS, 2021; Östlund et al., 2020).

Textiles made from natural fibres, such as cotton, generally have the lowest climate impact. Those made from synthetic fibres (especially nylon and acrylic) generally have a higher climate impact because of their fossil fuel origin and the energy consumed during production (ETC/WMGE, 2021b; Beton et al., 2014).

3. Design as an enabler of circular business models for textiles
To reduce the environmental and climate change impacts of textiles, shifting towards circular business models is crucial to save on raw materials, energy, water and land use, emissions and waste (ETC/WMGE, 2019). Implementing and scaling circular business models requires technical, social and business model innovation; as well as enablers from policy, consumption and education (EEA, 2021).

Circular design is an important component of circular business models for textiles. It can ensure higher quality, longer lifetimes, better use of materials, and better options for reuse and recycling. While it is important to enable the recycling and reuse of materials, life-extending strategies, such as design for durability, ease of reuse, repair and remanufacturing, should be prioritised. Preventing the use of hazardous chemicals and limiting toxic emissions and release of microplastics at all life cycle stages should be incorporated into product design.

Designing for circularity is the most recent development in design for sustainability. Expanding a technical and product-centric focus to a focus on large-scale system-level changes (considering both production and consumption systems) shows that this latest development requires many more disciplines than traditional engineering design. Product design as a component of a circular business model depends on consumer behaviour and policy to realise its potential and enable implementation. Figure 7 shows the linkages between the circular business model, product design, consumer behaviour and policy. All are needed to slow down and close the loop, making it circular.

• Representative study with almost 8,000 participants regarding the second hand fashion market in Germany
• Second hand replaces new: 84 percent have bought less new goods due to second hand shopping
• 71 percent have spent less money on new goods because they have bought second-hand clothing
• For just under one in two (45 percent), buying second-hand clothing has become a matter of course
• When buying second-hand fashion, sustainable production is more important (60 percent) than the brand name (48 percent)

Second hand replaces new - that's what 84 percent of second hand shoppers in Germany say, stating that buying second hand items has replaced buying a new clothing item for them. Another 71 percent state that they have spent less money on clothing because they have bought used items.** These are the results of the current Second Hand Fashion Report 2022, for which the second hand online store momox fashion has conducted two studies for the third time in a row: A representative survey in cooperation with the market research institute Kantar as well as a customer survey among momox fashion customers to get detailed insights into the second hand clothing market. A total of 7,826 people took part in the surveys.

Buying second hand clothes has become a matter of course for every second person
The representative Kantar survey shows that buying second-hand clothing has become routine: 67 percent of Germans have already bought second-hand clothing at some point - an increase of eleven percent on the previous year. More than one in two (56 percent) do so regularly - at least once a year. For 45 percent, buying second-hand clothing has become a matter of course or very much a matter of course. In addition, more than half of Germans (53 percent) estimate that their closet consists of up to 20 percent second-hand clothing.*

Second hand clothing is not only shopped online, but also sold
The most popular way to buy used clothing is online shopping: 44 percent of respondents buy their second-hand fashion pieces online. Around one in three (28 percent) go to second-hand stores in search of their next favorite second-hand item, followed by flea markets with 14 percent. Surprisingly, the 50+ generation in particular likes to buy online (44 percent). Generation Z (under 25s), however, prefers second-hand stores (30 percent).*

But it is not only second-hand online shopping that is popular. Almost one in two (45 percent) resells used clothing, preferably online (76 percent). Only 11 percent sell at flea markets and 8 percent at second-hand stores.*

Sustainability remains main motivation for buying used clothing
To find out more about the reasons for buying second-hand clothing, momox fashion conducted a customer survey among almost 7,000 participants. The main motivation for buying second-hand clothing continues to be the sustainability aspect with 87 percent. 83 percent buy second-hand clothing because of the price savings compared to new goods. Around one in two (49 percent) goes in search of clothing in second-hand stores because the desired items are no longer available in regular stores.**

Almost all respondents (91 percent) generally consider sustainability and environmental protection to be important or very important when buying clothing. This is also reflected in consumer behavior: Around three quarters (85 percent) try to buy second-hand whenever possible. 58 percent make sure to purchase sustainable clothing. And 31 percent use environmentally friendly products for the care and cleaning of clothing.**

Sustainable production or brand name - which is more important?
For more than half (51 percent) of the respondents, the brand name is less important or unimportant when buying used clothing. Whether the clothing was produced sustainably, on the other hand, is considered by 60 percent to be very important or important. Especially for the 60+ generation (75 percent), sustainable production of second-hand clothing is very important or important.**

Second hand clothing is especially popular among parents
However, second-hand clothing is not only bought for oneself, almost every fifth person (18 percent) also buys it for his/her children.* Among the parents of the second-hand shoppers, 85 percent buy second-hand clothing for their children. Online stores (58 percent) and online marketplaces and second-hand online stores (51 percent) are the most popular. 43 percent buy used children's clothing from friends. 33 percent like to go shopping in second-hand stores and another 23 percent in stationary children's clothing stores. At the same time, 63 percent of respondents say they buy more second-hand clothing since becoming parents.**

Jackets and coats are second hand top sellers
Second-hand jackets and coats (70 percent) are the most popular items, followed by sweaters (60 percent), dresses and skirts (56 percent) and pants (49 percent). Pants and sweaters seem to have become more popular among second-hand shoppers compared to the previous year (previous year: 46 percent and 51 percent). Younger shoppers (18-29 year olds) prefer to buy their sweaters second hand even more than jackets and coats (80 percent).**

Sources:
* Kantar survey
** momox fashion survey
 
Method:
Kantar survey: number of cases (n=1,037), target group: 16-64 years; method: online survey in the survey period (13.-16.11.2021), conducted by Kantar Deutschland GmbH on behalf of momox AG.
 
momox fashion survey: number of cases (n=6,789), survey period (21.-26.10.2021), target group: momox fashion customers aged under 18 to over 60; method: online survey, conducted by momox AG

Download of study (in German)

SCIRT stands for System Circularity & Innovative Recycling of Textiles. Coordinated by VITO, an independent Flemish research organisation in the cleantech and sustainable development sector, SCIRT is a three year EU-funded project from the Horizon 2020 Programme.

It aims to demonstrate a complete textile-to-textile recycling system for discarded clothing—or post-consumer textiles—involving stakeholders throughout the value chain and focusing on the recycling of natural fibres, synthetic fibres and fibre blends. To reach this goal, the project has set four main objectives.

• Deliver a closed-loop recycling solution for discarded textiles.
• Stimulate and encourage conscious design as well as production practices.
• Create new business opportunities by boosting textile value chain activity.
• Raise awareness of the environmental and social impacts of buying clothes.

Gathering 18 partners from five countries, the SCIRT project held its virtual kick-off meeting in mid-2021 to begin tackling the issue of clothing waste and recyclability, one of the biggest challenges faced in the fashion industry today.

As clothing brands are setting ambitious targets and making promises to incorporate recycled fibres in their products, discarded textiles are piling up in abundance around the globe. Though it would seem that the stars of supply and demand have aligned for this part of the circular economy, the truth is that less than 1% of textile waste is recycled into new textile fibres, according to an Ellen MacArthur Foundation report published in 2017. This miniscule percentage is indicative of a greater problem-achieving circularity in the fashion industry is not just a question of supply and demand, but of the connection between the two. There is a lack of knowledge surrounding the technological, economic and environmental feasibility of recycling fibre mixtures, and a need to align the quality and cost of recycling processes with the demands of textile companies and fashion brands.

SCIRT will develop solutions to support systemic innovation towards a more circular fashion system and bridge this supply-demand gap. To address the demand side of the equation, SCIRT will demonstrate a complete textile-to-textile recycling system for discarded clothing, otherwise known as post-consumer textiles, involving stakeholders throughout the value chain and focusing on the recycling of natural and synthetic fibres, as well as fibre blends. With the support of technical partners and research institutes, clothing brands Decathlon, Petit Bateau, Bel & Bo, HNST and Xandres, will develop, prototype and produce six different representative types of apparel using post-consumer recycled fibres. These include formal and casual wear, sportswear, underwear and uniforms. Through this endeavour, SCIRT will prioritise quality and cost-effectiveness in order to ensure market confidence and encourage the broad uptake of post-consumer recycled fibres.

From a non-technological perspective, SCIRT will develop supporting policy measures and tools to facilitate the transition towards a circular system for apparel. This includes a framework for an eco-modulated Extended Producer Responsibility (EPR) system and a True Cost Model to quantify circularity and increase value chain transparency. Special attention will also be given to the consumer perspective. To this end, Citizen Labs engaging consumers in various European locations, as well as a wider online engagement platform, will be developed to engage citizens throughout the project in order to understand the perceptions, motivations and emotions shaping their behaviour regarding the purchase, use, and disposal of textiles.

Over the next three years, SCIRT project partners will work to overcome current technological, economic, socio-economic and regulatory barriers faced in textiles recycling to achieve a real, lasting circular fashion economy.

2021:
The SCIRT project kicks off and partners identify the current state-of-the-art in apparel design, production and recycling, challenges and market trends, and stakeholder needs.

2022:
Designing and testing a fibre-to-fibre system by producing recycled yarns and filaments, free from harmful substances.

2023:
Formal wear, casual wear, sportswear, underwear and uniforms will be designed and produced using the optimized yarns developed.

Partners

• Fashion companies: Bel&Bo, HNST, Decathlon, Xandres, Petit Bateau
• Research organisations: VITO, CETI, Prospex Institute
• Universities: BOKU, TU Wien, ESTIA
• Industry players: Altex, AVS Spinning - A European Spinning Group (ESG) Company, Valvan
• SMEs: Circular.fashion, FFact
• Non-profit organisations: Flanders DC, IID-SII

ALTEX
ALTEX is a textile recycling company based in Germany that employs state-of-the-art machinery to recycle textile waste into new high-quality products. Its products include teared fibres, natural fibres, synthetic fibres and fibre blends among others.

Bel & Bo
Bel&Bo is a family-owned Belgian business with about 95 retail stores located throughout Belgium. Its mission is to offer colourful, fashionable and sustainably produced clothing for men, women and children at an affordable price.

CETI
The European Center for Innovative Textiles (CETI) is a non-profit organisation dedicated to conceiving, experimenting with and prototyping innovative textile materials and products through both private and collaborative R&D projects.

circular.fashion
circular.fashion offers software for circular design, intelligent textile sorting and closed-loop recycling, including the Circular Design Software and the circularity.ID®, as well as training and hands-on support to fashion brands in their transitions.

Decathlon
With over 315 stores in France, and 1,511 around the world, Decathlon has been innovating since 1976 to become the main player for athletic people. It has been engaged in reducing its environmental impact through a number of actions.

ESG
The European Spinning Group (ESG) is a textile group based in Belgium that offers a range of yarns produced with a highly technological open-end spinning mill for different applications, such as for interiors, fashion and technical textiles.

ESTIA
ESTIA is a French institute that has provided education and training in the areas of industrial technologies for 20 years. Since 2017, ESTIA has had a program focused on new materials and disruptive process in the fashion and textile industry.

FFACT
FFact is a unique group of management consultants that facilitates the implementation of sustainability from a business perspective, and translates facts into useful management information. FFact is based in the Netherlands and Belgium.

Flanders DC
The Flanders District of Creativity, a non-profit organisation based in Belgium, informs, coaches, promotes and inspires creative entrepreneurs in various sectors, including the fashion industry, who want to build or grow their business.

HNST
HNST is a Belgian circular denim brand that recovers post-consumer denim and recycles it into new fabric in the EU, creating durable and 100% recyclable jeans that use 82% less water and emit 76% less carbon dioxide than conventional jeans.

Petit Bateau
Petit Bateau is a French apparel brand that specialises in knit products. As a vertical company, Petit Bateau carries out its own knitting, dyeing, making up and store management with the support of its 3,000 employees.

Prospex Institute
The Prospex Institute aims to promote the participation of citizens and stakeholders in socially relevant decision-making dialogue and development by engaging with theorists and practitioners both in Belgium and abroad.

IID-SII
The Sustainable Innovation Institute is a French non-profit association based in Paris. Initiated by LGI, a French SME, the purpose of IID-SII is to act as a think and do tank on sustainable innovation to support the adoption of novel solutions.

TU Wien
TU Wien is an open academic institution where research, teaching and learning have taken place under the motto “Technology for people” for the past 200 years. One of its key areas of research is on recycling technology and fibre innovation.

BOKU
Research at the Institute for Environmental Biotechnology of BOKU based in Vienna, Austria focus on the exploitation of enzymes as powerful biocatalysts for biomaterials processing within recycling applications.

Valvan
Valvan Baling Systems has 30 years of experience in designing and constructing custom-made machinery, specialising in Baling Machines and Sorting Facilities for fibre producers, collectors, sorters and recyclers of textiles.

VITO
VITO, a leading independent European research and technology organisation in the cleantech and sustainable development sectors, aims to accelerate the transition towards a sustainable society by developing sustainable technologies.

Xandres
Xandres is a brand inspired by and for women. It is rooted in a highly respected tradition of fashion, driven by quality and created for the life women lead today. Xandres offers innovative designs with respect for luxury and the environment.

Cellulose Fibre Innovation of the Year 2022: Cellulose Fibre Solutions are expanding from hygiene and textiles as well as non-wovens up to alternatives for carbon fibres for light-weight applications.

Great submissions made the nomination for the Innovation Award difficult. All of them present promising sustainable solutions in the field of cellulose fibres value chain. Six of them now get the chance to demonstrate their potential to a wide audience in Cologne (Germany), and online.

For the second time, nova-Institute grants the “Cellulose Fibre Innovation of the Year” within the framework of the “International Conference on Cellulose Fibres 2022” (2-3 February 2022). The advisory board of the conference nominated six  products, ranging from cellulose made of orange- and wood pulp to a novel technology for cellulose fibre production. The presentations, election of the winner by the conference audience and the award ceremony will take place on the first day of the conference.

Cellulose fibres show an increasingly expanding wide range of applications, while at the same time markets are driven by technological developments and political framework conditions, especially bans and restrictions on plastics and increasing sustainability requirements. The conference provides rich information on opportunities for cellulose fibres through policy assessment, a session on sustainability, recycling and alternative feedstocks as well as latest development in pulp, cellulose fibres and yarns. This includes application such as non-wovens, packaging and composites.

Here are the nominees:
Carbon Fibres from Wood – German Institutes of Textile and Fiber Research Denkendorf (Germany)
The HighPerCellCarbon® technology is a sustainable and alternative process for the production of carbon fibres made from wood. The technology starts with wet spinning of cellulosic fibres using ionic liquids (IL) as direct solvent in an environmentally friendly, closed loop filament spinning process (HighPerCell® technology). These filaments are directly converted into carbon fibres by a low-pressure stabilisation process, followed by a suitable carbonisation process. No exhaust fumes or toxic by-products are formed during the whole process. Furthermore, the approach allows a complete recycling of solvent and precursor fibres, creating a unique and environmentally friendly process. Carbon fibres are used in many lightweight applications and the fibres are a sustainable alternative to fossil-based ones.

Fibers365, Truly Carbon-Negative Virgin Fibres from Straw – Fibers365 (Germany)
Fibers365 are the first carbon-negative virgin straw fibres on the market. The Fibers365 concept is based on a unique, state of the art process to provide functional, carbon negative, and competitive non-wood biomass products such as virgin fibres for paper, packaging and textile purposes as well as high value process energy, biopolymer and fertilizer side streams. The products are extracted from the stems of annual food plants such as straw by a chemical-free, regional, farm level steam explosion pulping technology, allowing an easy separation of the fibres from sugars, lignin, organic acid and minerals. In the case of annual plants, CO2 emissions are recaptured within 12 months from their production date, offering “instant”, yearly compensation of corresponding emissions.

Iroony® Hemp and Flax Cellulose – RBX Créations (France)
Iroony® is a branded cellulose made by RBX Créations from hemp. This resistant hemp plant grows quickly within in a few months, massively captures carbon and displays a high content of cellulose. The biomass is directly collected from French farmers who cultivate without chemicals or irrigation, in extended rotation cycles, contributing to soil regeneration and biodiversity. For a diversified supply, the hemp can be combined with organically-grown flax. Through its patented process, RBX Créations extracts high-purity cellulose, perfectly suitable for spinning technologies such as HighPerCell® of DITF research centre. The resulting fibres display versatile properties of fineness, tenacity and stretch, for applications like clothing or technical textiles. Iroony® combines low impact, trackability and performance.

SPINNOVA, Sustainable Textile Fibre without Harmful Chemicals – Spinnova (Finland)
Spinnova’s innovative technology enables production of sustainable textile fibres in a mechanical process, without dissolving or any harmful chemicals. The process involves use of paper-grade pulp and mechanical refining to turn pulp into microfibrillated cellulose (MFC). The fibre suspension consisting of MFC is extruded to form textile fibre, without regeneration processes. The Spinnova process does not generate any side waste, and the environmental footprint of SPINNOVA® including 65 % less CO2 emissions and 99 % less water compared to cotton production. Spinnova’s solution is also scalable: Spinnova targets to reach 1 million tonnes annual production capacity in the next 10 to 12 years.    

Sustainable Menstruation Panties: Application-driven Fibre Functionalisation – Kelheim Fibres (Germany)
Kelheim’s plant-based and biodegradable fibres contribute significantly to a sustainable future in the field of reusable hygiene textiles. Through innovative functionalisation they are specifically adjusted to the requirements of the single layers and thereby reach a performance comparable to that of synthetic fibres. A unique duality in fibre technology is created: sustainably manufactured cellulosic fibres that allow for high wearing comfort and reusability with extraordinary, durable performance. Fibre concepts comprise Celliant® Viscose, an in-fibre infrared solution and Danufil® Fibres in the top sheet, Galaxy, a trilobal fibre for the ADL, Bramante, a hollow viscose fibre, in the absorbing core and a water repellent woven fabric, a biodegradable PLA film or a sustainable coating as a back sheet.

TENCEL™ branded Lyocell Fibre made of Orange and Wood Pulp – Orange Fiber (Italy)
Orange Fiber is the world's first company to produce a sustainable textile fibre from a patented process for the extraction of cellulose to be spun from citrus juice leftovers, which are more than 1 million tonnes a year just in Italy. The result of our partnership with Lenzing Group, leading global producer of wood-based specialty fibres, is the first ever TENCEL™ branded lyocell fibre made of orange and wood pulp. A novel cellulosic fibre to further inspire sustainability across the value chain and push the boundaries of innovation. This fibre, part of the TENCEL™ Limited Edition initiative, is characterized by soft appeal and high moisture absorbance and has already obtained the OEKO-TEX Standard 100 certificate and is undergoing a diverse set of other sustainability assessments.

From December 1 to 2, 2021, the industry will meet up again live at the trade fair center in Munich. Trade visitors, industry insiders and experts can look forward to inter-personal exchanges, intensive networking, exciting fabric innovations and various other program highlights. The fair will go ahead in strict compliance with the current official hygiene regulations and in close cooperation with the Messe München authorities. Planned as a hybrid event, PERFORMANCE DAYS offers the possibility to follow what is on offer digitally.

Live in Munich: PERFORMANCE DAYS in Hall A6
In Hall A6 on the grounds of the New Trade Center in Munich, trade visitors can look forward to an extensive portfolio of exhibitors showcasing their latest functional textiles and fabric innovations for the upcoming winter season, winter 2023/24. Exhibitors who are unable to present their highlights on site can also be accessed via the PERFORMANCE DAYS LOOP digital platform throughout the course of the fair. As part of the newly developed “remote booths” concept, trade visitors will for the first time also find collections from exhibitors who cannot be in Munich in person for the trade show. Interactive exchanges via chat, call or video call is planned.

Two further PERFORMANCE DAYS fairs are planned as live events: The Functional Fabric Fair by PERFORMANCE DAYS in Portland, Oregon, USA on November 17-18, 2021 and Functional Textiles Shanghai by PERFORMANCE DAYS on December 6-7, 2021. Registration is open at www.functionalfabricfair.com/ and www.functionaltextilesshanghai.com/

PERFORMANCE FORUM together with USA Fair
As part of the PERFORMANCE FORUM, a select jury of experts assembles for two days prior to the fair to exchange views on the latest fabric innovations for the winter 23/24 season. In order to ensure a more global market overview, the PERFORMANCE FORUM will curate highlights for the first time in conjunction with the US fair in Portland. Consequently, the next fair in Munich will not only feature the latest products from exhibitors at the Munich fair, but also highlights from the fair in Portland. This year’s Focus Topic in cooperation with the Vaude Academy will engage with the topic “The Sustainable Future of Nylon” and a specific hand-chosen selection of fabric materials. Furthermore, as part of the winter fair, the “sustain & innovate” conference on sustainability, organized in close cooperation with SAZsport, will take an in-depth look at the topic comprising all its aspects along with speakers, webinars and discussion rounds. The program will be broadcast live from the fair and thus accessible for all who wish to follow it online in digital form.  

Eco Award and Performance Award for Innovative Winter Fabrics 23/24
This year, in addition to a PERFORMANCE AWARD, the jury also presented an ECO PERFORMANCE AWARD. An integral part of the winter edition of PERFORMANCE DAYS is the presentation of the fabric highlights and accessory trends in the respective categories for the Winter Season 2023/24 at the PERFORMANCE FORUM. The well-known segments will be joined for the first time this winter by the Shoes & Bags category, while the renowned Lifestyle Category will be continued under its new title, “Function Meets Fashion”. The high level of innovation and quality of many of the fabrics submitted this year are particularly striking.

“The fusion of the two PERFORMANCE FORUMs of our fairs in Munich and Portland has lead to a significant increase in quality and innovation. Thanks to the new partnership, not only were we able to get new, exciting manufacturers on board, but there was also a significant increase in participation in general“, says Marco Weichert, CEO of PERFORMANCE DAYS.

Natural fabrics such as organic cotton, wool or canvas remain in demand. These are joined by significantly more plant fibers such as hemp, coconut shell, bamboo or fibers derived from pineapple or banana leaves. The additional use of castor oil, zinc or ginger supports the antibacterial effect, ensures enhanced breathability, optimum temperature management and makes the fabric soft, light and kind to the skin. The topic of recycling presents itself in various new facets and features exciting trends. The portfolio ranges from the recycling of marine waste, such as old buoys, plastic waste or fishing nets, to the recycling of waste from the automotive and computer industries, such as old car tires or computer chips. Natural dyeing methods are also gaining increasing importance, as is the recycling of materials into the textile loop.

In the Marketplace, visitors have the opportunity to view over 13,000+ products from exhibitors, including the fabric highlights of the individual categories at the PERFORMANCE FORUM. In order to be able to present the fabrics to the digital visitors as realistically as possible in terms of feel, design and structure, the PERFORMANCE FORUM has been equipped with groundbreaking 3D technology, including innovative tools such as 3D images, video animations and U3M files for download.

In addition to the PERFORMANCE AWARD WINNER, which goes to drielease/Optimer, there is also an ECO PERFORMANCE AWARD WINNER, awarded to Long Advance.

Completely new look: With the innovative Dricomfort Geo, drirelease turns to a blend of 6 % Lycra, 44 % polyester and 50 % recycled polyester. The processing of the various fibers in the knitting process, in combination with the Dricomfort GEO finishing, makes the reversible interlock fabric unique.

Unique, new pattern and knit designs are possible thanks to a special jacquard knitting process used to process the recycled polyester yarn. The material impresses with its lightness and versatility. The GEO technology also ensures optimal body temperature management. The adaptable technology provides excellent thermal regulation features through efficient heat management and enhanced moisture transport to optimize comfort and performance. Moreover, GEO boasts UV protection up to 50+.

New recycling variant: Long Advance presents LNT-21191-Z4C, a post consumer nylon that opens up a new world to recycling. The fabric, which consists of 7 % elastane and 93% recycled polyamide via Mass Balance, introduces new facets to the topic of recycling. BASF is using tire waste from now on and processes them into a new fiber. fiber. Due to the recycling, the need for synthetic fabrics are reduced to replace petroleum-based plastics with plastics made from renewable raw materials.