Textination Newsline

Reset
5 results
(c) Porsche AG
04.05.2021

Fraunhofer: Lightweight and Ecology in Automotive Construction

  • The “Bioconcept-Car” moves ahead

In automobile racing, lightweight bodies made from plastic and carbon fibers have been standard for many years because they enable drivers to reach the finish line more quickly. In the future, lightweight-construction solutions could help reduce the energy consumption and emissions of everyday vehicles. The catch is that the production of carbon fibers is not only expensive but also consumes considerable amounts of energy and petroleum. In collaboration with Porsche Motorsport and Four Motors, researchers at the Fraunhofer WKI have succeeded in replacing the carbon fibers in a car door with natural fibers. This is already being installed in small series at Porsche. The project team is now taking the next step: Together with HOBUM Oleochemicals, they want to maximize the proportion of renewable raw materials in the door and other body parts - using bio-based plastics and paints.

  • The “Bioconcept-Car” moves ahead

In automobile racing, lightweight bodies made from plastic and carbon fibers have been standard for many years because they enable drivers to reach the finish line more quickly. In the future, lightweight-construction solutions could help reduce the energy consumption and emissions of everyday vehicles. The catch is that the production of carbon fibers is not only expensive but also consumes considerable amounts of energy and petroleum. In collaboration with Porsche Motorsport and Four Motors, researchers at the Fraunhofer WKI have succeeded in replacing the carbon fibers in a car door with natural fibers. This is already being installed in small series at Porsche. The project team is now taking the next step: Together with HOBUM Oleochemicals, they want to maximize the proportion of renewable raw materials in the door and other body parts - using bio-based plastics and paints.

Carbon fibers reinforce plastics and therefore provide lightweight components with the necessary stability. Mass-produced natural fibers are not only more cost-effective but can also be produced in a considerably more sustainable manner. For the “Bioconcept-Car” pilot vehicle, researchers at the Fraunhofer WKI have developed body parts with 100 percent natural fibers as reinforcing components.

“We utilize natural fibers, such as those made from hemp, flax or jute. Whilst natural fibers exhibit lower stiffnesses and strengths compared to carbon fibers, the values achieved are nonetheless sufficient for many applications,” explained Ole Hansen, Project Manager at the Fraunhofer WKI. Due to their naturally grown structure, natural fibers dampen sound and vibrations more effectively. Their lesser tendency to splinter can help to reduce the risk of injury in the event of an accident. Furthermore, they do not cause skin irritation during processing.

The bio-based composites were successfully tested by the Four Motors racing team in the “Bioconcept-Car” on the racetrack under extreme conditions. Porsche has actually been using natural fiber-reinforced plastics in a small series of the Cayman GT4 Clubsport since 2019. During production, the researchers at the Fraunhofer WKI also conducted an initial ecological assessment based on material and energy data. “We were able to determine that the utilized natural-fiber fabric has a better environmental profile in its production, including the upstream chains, than the fabric made from carbon. Thermal recycling after the end of its service life should also be possible without any problems,” confirmed Ole Hansen.

In the next project phase of the "Bioconcept-Car", the researchers at the Fraunhofer WKI, in collaboration with the cooperation partners HOBUM Oleochemicals GmbH, Porsche Motorsport and Four Motors, will develop a vehicle door with a biogenic content of 85 percent in the overall composite consisting of fibers and resin. They intend to achieve this by, amongst other things, utilizing bio-based resin-hardener blends as well as bio-based paint systems. The practicality of the door - and possibly additional components - will again be tested by Four Motors on the racetrack. If the researchers are successful, it may be possible to transfer the acquired knowledge into series production at Porsche.

The German Federal Ministry of Food and Agriculture (BMEL) is funding the “Bioconcept-Car” project via the project-management agency Fachagentur Nachwachsende Rohstoffe e. V. (FNR).

Background
Sustainability through the utilization of renewable raw materials has formed the focus at the Fraunhofer WKI for more than 70 years. The institute, with locations in Braunschweig, Hanover and Wolfsburg, specializes in process engineering, natural-fiber composites, surface technology, wood and emission protection, quality assurance of wood products, material and product testing, recycling procedures and the utilization of organic building materials and wood in construction. Virtually all the procedures and materials resulting from the research activities are applied industrially.

 

  • EU Project ALMA: Thinking Ahead to Electromobility

E-mobility and lightweight construction are two crucial building blocks of modern vehicle development to drive the energy transition. They are the focus of the ALMA project (Advanced Light Materials and Processes for the Eco-Design of Electric Vehicles). Nine European organizations are now working in the EU project to develop more energy-efficient and sustainable vehicles. Companies from research and industry are optimizing the efficiency and range of electric vehicles, among other things by reducing the weight of the overall vehicle. The Fraunhofer Institute for Industrial Mathematics ITWM is providing support with mathematical simulation expertise.

According to the low emissions mobility strategy, the European Union aims to have at least 30 million zero-emission vehicles on its roads by 2030. Measures to support jobs, growth, investment, and innovation are taken to tackle emissions from the transport sector. To make transport more climate-friendly, EU measures are being taken to promote jobs, investment and innovation. The European Commission's Horizon 2020 project ALMA represents one of these measures.

DIGITALE PROZESSKETTE SICHERT ZUKUNFT DES LEICHTBAUS © Reed Exhibitions Deutschland GmbH
10.09.2019

DIGITAL PROCESS CHAIN SECURES THE FUTURE OF LIGHTWEIGHT CONSTRUCTION

  • At COMPOSITES EUROPE from 10 to 12 September
     
  • Incubator of ideas for multi-material lightweight construction
     
  • „Ultralight in Space“: Market study examines lightweight construction trends in aerospace

Whenever there’s movement, mass and weight quickly become destroyers of energy. From 10 to 12 September, the Lightweight Technologies Forum (LTF) at COMPOSITES EUROPE in Stuttgart will show how lightweight construction contributes to more efficient and better cars, airplanes and machines. The focus at the Forum will be on the commercially viable implementation of cross-material and holistic lightweight construction systems. The way to get there is through the digitalisation of the process chain.

  • At COMPOSITES EUROPE from 10 to 12 September
     
  • Incubator of ideas for multi-material lightweight construction
     
  • „Ultralight in Space“: Market study examines lightweight construction trends in aerospace

Whenever there’s movement, mass and weight quickly become destroyers of energy. From 10 to 12 September, the Lightweight Technologies Forum (LTF) at COMPOSITES EUROPE in Stuttgart will show how lightweight construction contributes to more efficient and better cars, airplanes and machines. The focus at the Forum will be on the commercially viable implementation of cross-material and holistic lightweight construction systems. The way to get there is through the digitalisation of the process chain.

From the idea to the component – that’s the path the Lightweight Technologies Forum aims to illuminate and support. To that end, the forum will gather current lightweight construction projects in Stuttgart, including from automotive engineering, aerospace and mechanical engineering – precisely those industries whose stringent material, safety and reliability demands make them idea generators for many other industries.
The commonality that runs through all the projects: a consistently digital process chain contributes significantly to the implementation of innovations. Another focus area is connecting and joining technology in multi-material lightweight construction.

"The Lightweight Technologies Forum is conceived as a cross-industry and cross-material incubator of ideas, a place where all stakeholders can consider new concepts. For that, we’re bringing successful flagship projects to Stuttgart”, says Olaf Freier, who on behalf of organiser Reed Exhibitions is responsible for the programme of the forum.

The growing significance of digitalisation and bionics
Support in putting together the forum programme comes from Automotive Management Consulting (AMC). The consulting company specialises in lightweight construction strategies, processes and structures in the automotive industry. “Lightweight construction requires comprehensive, systematic thinking”, says Rainer Kurek, the managing director of AMC. “The most important key factor, though, is the digitalisation of the process chain. Only virtual and simulation-driven design work can bring about competitive lightweight construction products, because they’re launched faster and ensure process safety while costing far less in development”, Kurek adds.

„Ultralight in Space“: Market study on lightweight construction trends in the aerospace industry
When it comes to ultra-lightweight construction, space travel has played a pioneering role since its inception, having driven many disciplines to new record performances. In cooperation with the Luxembourg-based aerospace suppliers GRADEL, AMC are currently conducting a market study to examine the latest technological trends. The results will be revealed at the LTF in Stuttgart on 10 September.
"Even though aerospace is a niche business: technical solutions that meet the stringent material demands here lead the way into the future, which in turn impacts other industries. That’s why it’s important to know the customer’s needs as well as the lightweight strategies, processes, structures and material decision-making of this market”, Rainer Kurek says assuredly.

Also underlining how important space travel is for the development of new technologies is Claude Maack, managing director of GRADEL: “All components are exposed to extreme conditions. Right from the launch of the rocket, they have to withstand enormous acceleration forces. In space, material must resist radiation exposure – and for many years. Then there are the high temperature differences from minus 185 to plus 200 degrees Celsius – alternating every couple of hours from one extreme to the other.“

The material question: Composites with biggest growth potential
Metals currently hold the largest market share among lightweight materials – but fibre-reinforced composites are said to have the biggest growth potential. More and more often they get to apply their strengths in lightweight construction. In the exhibition area, the LTF demonstrates how glass-fibre reinforced (GFRP) and carbon-fibre reinforced plastics (CFRP) play to their strengths in hybrid structural components.
On display, among other things, will be an ultra-lightweight seat by Automotive Management Consulting (AMC), Alba tooling & engineering and csi entwicklungstechnik GmbH, which was presented as a feasibility study – based on the lightweight construction innovation xFK in 3D – and virtual prototype at the 2018 LTF.

The innovative ultra-lightweight seat, which only weighs 10 kg, is based on a special winding process for fibre-composite components. The  “xFK in 3D process” uses a resin-impregnated continuous fibre from which components are wound and produced without waste to match the load. Conceivable uses for the concept seat include the so-called hypercars, sports cars and the air taxis of the future. Just a few weeks ago, the prototype was presented to the public and swiftly recognised with the German Innovation Award.

Exhibitors will be presenting additional lightweight construction solutions in the adjacent Lightweight Area. Some examples include structural components, semi-finished goods, technical textiles, adhesives and resins for automotive engineering and aerospace.

Altogether, visitors of the Lightweight Technologies Forum and COMPOSITES EUROPE will meet 300 exhibitors from 30 countries who will come to Stuttgart to showcase the entire process chain of fibre-reinforced plastics – from materials to machines for processing to concrete application examples from automotive engineering, aerospace, mechanical engineering, construction, wind power, and the sports and leisure sector. Besides new products, a special focus of the trade fair will be on advances in process technologies for large-scale series production.  
 

Show Preview COMPOSITES EUROPE 2018: Focus on process technologies (c) COMPOSITES EUROPE
09.10.2018

SHOW PREVIEW COMPOSITES EUROPE 2018: FOCUS ON PROCESS TECHNOLOGIES

  • Premiere: “Process live” format
  • Lightweight Technologies Forum to present hybrid lightweight construction
  • Trade fair kick-off event: International Composites Congress (ICC)

In the competition of lightweight construction and design materials, composites are among the winners – automotive engineering, aerospace, wind energy, boatbuilding and construction can no longer do without glass- and carbon-fibre reinforced plastics (GFRP & CFRP). Nevertheless, the greatest impetus right now is coming from the composites industry itself: technological advancements in the process chain. From 6 to 8 November, COMPOSITES EUROPE in Stuttgart will drive home that point.

  • Premiere: “Process live” format
  • Lightweight Technologies Forum to present hybrid lightweight construction
  • Trade fair kick-off event: International Composites Congress (ICC)

In the competition of lightweight construction and design materials, composites are among the winners – automotive engineering, aerospace, wind energy, boatbuilding and construction can no longer do without glass- and carbon-fibre reinforced plastics (GFRP & CFRP). Nevertheless, the greatest impetus right now is coming from the composites industry itself: technological advancements in the process chain. From 6 to 8 November, COMPOSITES EUROPE in Stuttgart will drive home that point.

Trade fair visitors will meet more than 350 exhibitors from 30 countries who in Stuttgart will present state-of-the-art technology and the potential of fibre-reinforced composites – in the exhibition area as well as in numerous event areas, lecture forums and themed tours.

With the new “Process live” format, coordinated processing and manufacturing processes will become the visible focus of this year’s COMPOSITES EUROPE. Mechanical and plant engineering companies will get together in group exhibits to showcase their technologies in live interactions – thus enabling visitors to experience sub-processes presented in a larger context.

Partnerships in the process chain accelerate growth in the industry
Among others, the cutting specialists Gunnar (Switzerland), the composites automation experts Airborne (Netherlands) and the gripping systems providers Schmalz (Germany) will join forces to create a combined production cell in a process-safe depiction of the entire value chain from roller materials to the finished layer structure of a composite component. In this setup, interlocking hardware components are fully connected with each other via software. “Cooperation among processors is getting closer and closer. These partnerships within the process chain are accelerating the growth of the composites industry; that’s what we want to show with the new ‘Process live’ format”, says Olaf Freier, event director of COMPOSITES EUROPE.

Lightweight Technologies Forum: Platform for multi-material lightweight construction
Besides the optimisation of the process chain, industry research today is heavily focused on the use of GFRP and CFRP in multi-material systems. The Lightweight Technologies Forum will once again demonstrate how composites play to their strengths alongside other materials in the material mix for hybrid structural components. A total of 16 exhibitors will present materials, tools and exhibits here – from fillers to bonding agents and presses for laminating different materials to semi-finished hybrid products.

In various presentations, experts will provide an overview of new products in manufacturing and joining technology as well as applications and lightweight engineering references from the automotive, aerospace and construction sectors. Support for the Lightweight Technologies Forum is provided by the German Federal Ministry for Economic Affairs and Energy.

From digitalisation to recycling: Know-how in the supporting programme
A presentation programme, themed tours and special areas complete the COMPOSITES EUROPE lineup. Manufacturing technology, recycling, digitalisation and thermoplastics will be central themes in the programme of the COMPOSITES Forum, which will also feature exhibitors presenting application examples from automotive engineering, aerospace, construction, mechanical engineering, wind energy and shipbuilding.

Themed guided tours, meanwhile, will lead visitors straight to the stands of selected exhibitors ready to explain the latest innovations in fibreglass, thermoplastics, automotive engineering, wind energy and construction.

Special areas and group stands to highlight new ideas
Hosting the special area “Industry meets Science”, the Institute of Plastics Processing (IKV), the leading European research institute for plastics technology based in Aachen, will showcase developments in process technology, design, quality assurance and repair.

The exhibitors at the “Bio-Based Composites Pavilion”, which will again be set up in cooperation with the nova-Institute, will reflect the development of the market for green composites. The focus will be on application options of wood-polymer composites (WPC), natural fibre composites (NFC), bio-based thermoplastics and thermosets for composites, and bio-based plastics.

Moreover, numerous young companies will thrill visitors with fresh ideas: the industry newcomers will present themselves at a group stand funded by the Federal Ministry for Economic Affairs and Energy (BMWi). They will cover a wide range of topics from semi-finished carbon-fibre products to metal foams to production lines for multi-material 3D fibre laminates.

Even the automotive experts of tomorrow will have their own forum at the trade fair: under the banner of “Formula Student”, students and apprentices will show visitors racecars they themselves have designed.

Kick-off event: 4th International Composites Congress (ICC)
The International Composites Congress (ICC) will once again kick off COMPOSITES EUROPE. In a series of presentations starting the day before the trade fair (5 and 6 November), international experts at the event with the headline topic “Composites – On the Path to Becoming a Key Industry?” will speak about and discuss applications, materials, process technologies and market prospects.

More information:
Composites Composites Europe
Source:

Reed Exhibitions Deutschland GmbH

Composites Europe © COMPOSITES EUROPE
05.09.2017

COMPOSITES EUROPE 2017: Lightweight automotive construction propels use of fibre-reinforced plastics

  • Market study “Lightweight Construction as Innovation Factor”: Presentation at COMPOSITES EUROPE
  • 21 September: Focus Day Automotive

No other industry has drawn more public attention to glass- and carbon-fibre reinforced plastics (GFRP/CFRP) than the automotive indus-
try. Next to the aerospace industry, it’s one of the innovation and growth drivers for composites. The great significance of composites for the automotive industry must be credited to the continuing lightweight construction trend. From 19 to 21 September, COMPOSITES EUROPE in Stuttgart will show how the composites industry can support automakers and their suppliers in this area. Programme highlights include the Focus Day Automotive and the Lightweight Technologies Forum.

  • Market study “Lightweight Construction as Innovation Factor”: Presentation at COMPOSITES EUROPE
  • 21 September: Focus Day Automotive

No other industry has drawn more public attention to glass- and carbon-fibre reinforced plastics (GFRP/CFRP) than the automotive indus-
try. Next to the aerospace industry, it’s one of the innovation and growth drivers for composites. The great significance of composites for the automotive industry must be credited to the continuing lightweight construction trend. From 19 to 21 September, COMPOSITES EUROPE in Stuttgart will show how the composites industry can support automakers and their suppliers in this area. Programme highlights include the Focus Day Automotive and the Lightweight Technologies Forum.

Presentation of the study “Lightweight Construction as Innovation Factor”
When it comes to composites in the automotive sector, modern lightweight construction is the No. 1 topic, according to industry expert Rainer Kurek, CEO of AUTOMOTIVE MANAGEMENT CONSULTING GmbH (AMC) from Penzberg near Munich. After all, he says, it comprises all the aspects of lightweight automotive construction – from concept, functions and joining technologies to materials. The training and consulting company specialises in auto-industry strategies, processes and structures; together with COMPOSITES EUROPE organiser Reed Exhibitions, they will, on 21 September, present the study “Lightweight Construction as Innovation Factor” (“Leichtbau als Innovationsfaktor” in the original German), which takes a holistic and detailed look at the issue. “Created in cooperation with Reed Exhibitions, the market study ‘Lightweight Construction as Innovation Factor’ synthesises the German automotive industry’s knowledge from nearly 150 years of experience”, explains Kurek. “Against the backdrop of increasing environmental and climate-protection requirements, a fragile energy supply and the resulting more stringent resource-conservation targets, it serves to sustainably enhance and strengthen Germany’s role as a centre of innovation.” The developer says he used to think in terms of materials first, but “design engineers today approach lightweight construction with an integrative mindset – with other joining and production technologies as well as with new materials. These days, the typical tasks we get from OEMs are almost always based on integrative lightweight construction.”
 
Positive Outlook
With about a third of the GFRP materials produced in Europe being used in the transport sector, innovations and the current development status of composites for the automotive market will be emphasised in the exhibition halls of COMPOSITES EUROPE 2017, as well. The future looks bright, according to Composites Germany’s latest market survey. No fewer than 46 per cent of responding companies expect this segment to grow. Only 15 per cent anticipate a downturn. The automotive industry isn’t just one of the biggest buyers of thermoplastic composites, it’s also a major purchaser of thermoset materials like SMC. Exhibitors such as Saint Gobain Performance Plastics, capricorn COMPOSITE, Lange+Ritter, SGL TECHNOLOGIES GmbH, ARKEMA France, Cevotec and EMS will be onsite to address the automotive industry’s composites requirements.

Theme day for “motorists”: Focus Day Automotive
What’s more, the entire third day of the trade fair – dubbed the Focus Day Automotive – will be dedicated to visitors predominantly interested in composites for the vehicle industry. A free one-hour guided tour at 11 am on 21 September, for example, will give visitors a comprehensive overview. Stops include the stands of industry-leading companies such as Evonik Industries, Huntsman, the Institute of Aircraft Design at the University of Stuttgart, PHP Fibers, Toho Tenax Europe and Vosschemie. Since the number of participants is limited, it would be advisable to register in a timely manner by visiting: www.composites-europe.com/guided-tours.

The subsequent Automotive Business Lunch taking place at the stand of sponsor Hexion (Hall C2, BO6) at 12 pm will provide an excellent networking opportunity. In addition, expert lectures at the COMPOSITES Forum in Hall 6, Stand B76, will cover automotive basics, trends and innovations. Admission is free of charge for trade fair visitors.
 
Hybrid lightweight construction: The best from different material worlds
Hybrid lightweight construction, which combines metallic materials with composites, is another trend in automotive engineering, as Kurek confirms. In his estimation, it’s imperative to intelligently leverage the strengths of each respective material. “We need to think very carefully about how the different materials can be used in line with the required strength.” Composites, for instance, are great at absorbing tensile forces, while metallic materials are better suited for compressive forces.” This is exactly the issue Kurek sees as COMPOSITES EUROPE’s most critical task: “Even with composites, we long ago moved from ‘either-or’ to ‘both’. Metallic materials have a right to exist just as composites do.”
That’s why the Lightweight Technologies Forum at COMPOSITES EUROPE will provide answers to questions revolving around lightweight construction with other materials like aluminium or steel. The combined exhibition and presentation forum featuring exhibitors such as Kunststoffwerk AG Buchs, Linn High Therm, Schütze, OCSiAL Group, Hexcel Composites and ar engineers will serve as the cross-material interface between metal and composite technologies in structural components.

Trade fair opening event: 3rd International Composites Congress (ICC)
Kicking off COMPOSITES EUROPE 2017 on 18 and 19 September 2017 will be the “3rd International Composites Congress (ICC)” hosted by the trade association Composites Germany in Stuttgart. Current trends, new applications and technologies, and a comprehensive overview of market developments in Europe and worldwide will be the centre of attention at the 3rd ICC. This year’s partner country, South Korea, will be represented with several exclusive speakers.

 

Wind energy plant © Timo Klostermeier / pixelio.de
11.10.2016

WIND POWER INDUSTRY AT COMPOSITES EUROPE 2016

Offshore expansion and onshore repowering ensure growth

  • Wind theme day with guided tour November 29th
  • Lectures about material trends

With an investment volume of EUR 14 billion in the offshore sector alone, the European wind power industry has set a new record high in the first half of 2016. This figure and the view on the still open approval procedures in this segment as well as the onshore upcoming generational change from existing to modern facilities (repowering) show that the potential for growth is far from being exploited. Also in America as well as in Asia and the Pacific area a new emerging wind energy sector is also driving demand for fiber composites. The COMPOSITES EUROPE exhibition will be showing in Dusseldorf from November 29th to December 1st 2016 the latest trends and developments.

Theme Day: Wind meets Composites

Offshore expansion and onshore repowering ensure growth

  • Wind theme day with guided tour November 29th
  • Lectures about material trends

With an investment volume of EUR 14 billion in the offshore sector alone, the European wind power industry has set a new record high in the first half of 2016. This figure and the view on the still open approval procedures in this segment as well as the onshore upcoming generational change from existing to modern facilities (repowering) show that the potential for growth is far from being exploited. Also in America as well as in Asia and the Pacific area a new emerging wind energy sector is also driving demand for fiber composites. The COMPOSITES EUROPE exhibition will be showing in Dusseldorf from November 29th to December 1st 2016 the latest trends and developments.

Theme Day: Wind meets Composites

Sector specialists such as Gaugler & Lutz, DD Compound, 3D Core, LAP and Power & Composite Technology will be showing current technologies at the COMPOSITES EUROPE, latest machine tools and manufacturing processes for the wind power industry. A highlight for all wind experts: On November 29th will be the theme day „Wind meets Composites" at the fair. This day will be sponsored by GUNNAR International, Weissenberger, Hexion and SAERTEX. Engineers of aerodynamics, materials science, lightweight construction and production technology will be able to exchange ideas with purchasers, exhibitors and wind energy specialists in the composite sector. The focus will be, among other things, on topics such as the influence of material selection, on design, weight, stability, processing or production processes as well as on certification, standardization and automation in rotor blade construction.
 
Guided theme walks

An optimal overview of exhibitors' offer on the topic wind is given to visitors by the opportunity of taking part at guided tours. Here they will specifically directed to various exhibitors from the wind segment, where they can get within 10 minutes information about their products and innovations. There will be two guided tours on November 29th: tour 1 will take place between 12:00 AM and 01.00 PM and tour 2 in the afternoon between 02:00 and 03:00 PM. Participating exhibitors include Airtech, GUNNAR International, Agilent Technologies, RH Cutting Technology, Granta Design, DD Compound and Armacell Benelux. The lecture is in English. Participation is free, but the number of participants is limited. Between the two round trips the participants have the opportunity to strengthen themselves at the "Wind Lunch" at the booth of Hexion (Hall 8a / booth G31).
Click here to register for the guided tours: www.composites-europe.com/guided-tours

 
Lectures at COMPOSITES Forum

On the afternoon of the wind theme day the COMPOSITES Forum provides an overview of the latest challenges in research, design, quality management, transportation and production of rotor blades. Starting at 3:00 PM Sinoi will discuss "Challenges and approaches in the construction of large onshore blades". Euros will hold a lecture on "Potentials and limits of composites in rotor blade construction" and the Fraunhofer Institute for Wind Energy and Energy System Technology will be presenting "Composite trends for wind turbine blades". Pontis Engineering also has a slot in the lecture program. From 04.00 PM it will be about "Challenges in design and manufacturing of large wind turbine blades". Access to the lecture area is free of charge for visitors. The COMPOSITES Forum is located in Hall 8, Booth B45.

Click here for a complete overview on the topic wind:
https://www.composites-europe.com/windenergie_527.html

About COMPOSITES EUROPE:
350 exhibitors from 30 countries will attend the COMPOSITES EUROPE, European Trade Fair and Forum for Composite Materials, Technology and Applications from November 29th to December 1st in Dusseldorf. The exhibition shows the entire range of fiber-reinforced plastics, from raw materials to manufacturing processes, to lightweight construction innovations in automotive engineering, aviation, boat building, wind power industry and construction. COMPOSITES EUROPE is organized by Reed Exhibitions in cooperation with the European sector association EuCIA and the economic association Composites Germany, a consortium of branch associations and clusters AVK, CCeV, CFK-Valley Stade and VDMA AG Hybrid Light Construction Technologies.