Textination Newsline

In a world first for the fashion industry, in October 2020 twelve pioneering players came together to break new ground by demonstrating a circular model for commercial garment production. Over more than three years, textile waste was collected and sorted, and regenerated into a new, man-made cellulosic fiber that looks and feels like cotton – a “new cotton” – using Infinited Fiber Company’s textile fiber regeneration technology.
 
The pioneering New Cotton Project launched in October 2020 with the aim of demonstrating a circular value chain for commercial garment production. Through-out the project the consortium worked to collect and sort end-of-life textiles, which using pioneering Infinited Fiber technology could be regenerated into a new man-made cellulosic fibre called Infinna™ which looks and feels just like virgin cotton. The fibres were then spun into yarns and manufactured into different types of fabric which were designed, produced, and sold by adidas and H&M, making the adidas by Stella McCartney tracksuit and a H&M printed jacket and jeans the first to be produced through a collaborative circular consortium of this scale, demonstrating a more innovative and circular way of working for the fashion industry.
 
As the project completes in March 2024, the consortium highlights eight key factors they have identified as fundamental to the successful scaling of fibre-to-fibre recycling.

The wide scale adoption of circular value chains is critical to success
Textile circularity requires new forms of collaboration and open knowledge exchange among different actors in circular ecosystems. These ecosystems must involve actors beyond traditional supply chains and previously disconnected industries and sectors, such as the textile and fashion, waste collection and sorting and recycling industries, as well as digital technology, research organisations and policymakers. For the ecosystem to function effectively, different actors need to be involved in aligning priorities, goals and working methods, and to learn about the others’ needs, requirements and techno-economic possibilities. From a broader perspective, there is also a need for a more fundamental shift in mindsets and business models concerning a systemic transition toward circularity, such as moving away from the linear fast fashion business models. As well as sharing knowledge openly within such ecosystems, it also is important to openly disseminate lessons learnt and insights in order to help and inspire other actors in the industry to transition to the Circular Economy.

Circularity starts with the design process
When creating new styles, it is important to keep an end-of-life scenario in mind right from the beginning. As this will dictate what embellishments, prints, accessories can be used. If designers make it as easy as possible for the recycling process, it has the bigger chance to actually be feedstock again. In addition to this, it is important to develop business models that enable products to be used as long as possible, including repair, rental, resale, and sharing services.

Building and scaling sorting and recycling infrastructure is critical
In order to scale up circular garment production, there is a need for technological innovation and infrastructure development in end-of-use textiles collection, sorting, and the mechanical pre-processing of feedstock. Currently, much of the textiles sorting is done manually, and the available optical sorting and identification technologies are not able to identify garment layers, complex fibre blends, or which causes deviations in feedstock quality for fibre-to-fibre recycling. Feedstock preprocessing is a critical step in textile-to-textile recycling, but it is not well understood outside of the actors who actually implement it. This requires collaboration across the value chain, and it takes in-depth knowledge and skill to do it well. This is an area that needs more attention and stronger economic incentives as textile-to-textile recycling scales up.

Improving quality and availability of data is essential
There is still a significant lack of available data to support the shift towards a circular textiles industry. This is slowing down development of system level solutions and economic incentives for textile circulation. For example, quantities of textiles put on the market are often used as a proxy for quantities of post-consumer textiles, but available data is at least two years old and often incomplete. There can also be different textile waste figures at a national level that do not align, due to different methodologies or data years. This is seen in the Dutch 2018 Mass Balance study reports and 2020 Circular Textile Policy Monitoring Report, where there is a 20% difference between put on market figures and measured quantities of post-consumer textiles collected separately and present in mixed residual waste. With the exception of a few good studies such as Sorting for Circularity Europe and ReFashion’s latest characterization study, there is almost no reliable information about fibre composition in the post-consumer textile stream either. Textile-to-textile recyclers would benefit from better availability of more reliable data. Policy monitoring for Extended Producer Responsibility schemes should focus on standardising reporting requirements across Europe from post-consumer textile collection through their ultimate end point and incentivize digitization so that reporting can be automated, and high-quality textile data becomes available in near-real time.

The need for continuous research and development across the entire value chain
Overall, the New Cotton Project’s findings suggest that fabrics incorporating Infinna™ fibre offer a more sustainable alternative to traditional cotton and viscose fabrics, while maintaining similar performance and aesthetic qualities. This could have significant implications for the textile industry in terms of sustainability and lower impact production practices. However, the project also demonstrated that the scaling of fibre-to-fibre recycling will continue to require ongoing research and development across the entire value chain. For example, the need for research and development around sorting systems is crucial. Within the chemical recycling process, it is also important to ensure the high recovery rate and circulation of chemicals used to limit the environmental impact of the process. The manufacturing processes also highlighted the benefit for ongoing innovation in the processing method, requiring technologies and brands to work closely with manufacturers to support further development in the field.

Thinking beyond lower impact fibres
The New Cotton Project value chain third party verified LCA reveals that the cellulose carbamate fibre, and in particular when produced with a renewable electricity source, shows potential to lower environmental impacts compared to conventional cotton and viscose. Although, it's important to note that this comparison was made using average global datasets from Ecoinvent for cotton and viscose fibres, and there are variations in the environmental performance of primary fibres available on the market. However, the analysis also highlights the importance of the rest of the supply chain to reduce environmental impact. The findings show that even if we reduce the environmental impacts by using recycled fibres, there is still work to do in other life cycle stages. For example; garment quality and using the garment during their full life span are crucial for mitigating the environmental impacts per garment use.
          
Citizen engagement
The EU has identified culture as one of the key barriers to the adoption of the circular economy within Europe. An adidas quantitative consumer survey conducted across three key markets during the project revealed that there is still confusion around circularity in textiles, which has highlighted the importance of effective citizen communication and engagement activities.

Cohesive legislation
Legislation is a powerful tool for driving the adoption of more sustainable and circular practices in the textiles industry. With several pieces of incoming legislation within the EU alone, the need for a cohesive and harmonised approach is essential to the successful implementation of policy within the textiles industry. Considering the link between different pieces of legislation such as Extended Producer Responsibility and the Ecodesign for Sustainable Products Regulation, along with their corresponding timeline for implementation will support stakeholders from across the value chain to prepare effectively for adoption of these new regulations.

The high, and continuously growing demand for recycled materials implies that all possible end-of-use textiles must be collected and sorted. Both mechanical and chemical recycling solutions are needed to meet the demand. We should also implement effectively both paths; closed-loop (fibre-to-fibre) and open -loop recycling (fibre to other sectors). There is a critical need to reconsider the export of low-quality reusable textiles outside the EU. It would be more advantageous to reuse them in Europe, or if they are at the end of their lifetime recycle these textiles within the European internal market rather than exporting them to countries where demand is often unverified and waste management inadequate.

Overall, the learnings spotlight the need for a holistic approach and a fundamental mindset shift in ways of working for the textiles industry. Deeper collaboration and knowledge exchange is central to developing effective circular value chains, helping to support the scaling of innovative recycling technologies and increase availability of recycled fibres on the market. The further development and scaling of collecting and sorting, along with the need to address substantial gaps in the availability of quality textile flow data should be urgently prioritised. The New Cotton Project has also demonstrated the potential of recycled fibres such as Infinna™ to offer a more sustainable option to some other traditional fibres, but at the same time highlights the importance of addressing the whole value chain holistically to make greater gains in lowering environmental impact. Ongoing research and development across the entire value chain is also essential to ensure we can deliver recycled fabrics at scale in the future.

The New Cotton Project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 101000559.

 

Composites Germany - Results of the 22^nd Composites Market Survey

• Critical assessment of the current business situation
• Future expectations brighten
• Investment climate remains subdued
• Different expectations of application industries
• Growth drivers with slight shifts
• Composites index points in different directions

For the 22^nd time, Composites Germany has collected current key figures on the market for fiber-reinforced plastics. All member companies of the supporting associations of Composites Germany: AVK and Composites United as well as the associated partner VDMA were surveyed.
In order to ensure that the different surveys can be compared without any problems, no fundamental changes were made to the survey. Once again, mainly qualitative data was collected in relation to current and future market developments.

Critical assessment of the current business situation
After consistently positive trends were seen in the assessment of the current business situation in 2021, this has slipped since 2022. There is still no sign of a trend reversal in the current survey. The reasons for the negative sentiment are manifold and were already evident in the last survey.

At present, politicians do not seem to be able to create a more positive environment for the industry with appropriate measures. Overall, Germany in particular, but also Europe, is currently experiencing a very difficult market environment.

However, the main drivers of the current difficult situation are likely to be the persistently high energy and commodity/raw material prices. In addition, there are still problems in individual areas of the logistics chains, for example on the main trade/container routes, as well as a cautious consumer climate. A slowdown in global trade and uncertainties in the political arena are currently fueling the negative mood in the market.

Despite rising registration figures, the automotive industry, the most important application area for composites, has not yet returned to its former volume. The construction industry, the second most important key area of application, is currently in crisis. Although the order books are still well filled, new orders are often failing to materialize. High interest rates and material costs coupled with the high cost of living are having a particularly negative impact on private construction, but public construction is also currently unable to achieve the targets it has set itself. According to the ZDB (Zentralverband Deutsches Baugewerbe), the forecasts in this important sector remain gloomy: "The decline in the construction industry is continuing. Turnover will fall by 5.3% in real terms this year and we expect a further 3% drop next year. Residential construction remains responsible for the decline, which will slump by 11% in real terms this year and continue its downward trajectory at -13% in 2024."

It is not only the assessment of the general business situation that remains pessimistic. The situation of their own companies also continues to be viewed critically. The picture is particularly negative for Germany. Almost 50% of respondents are critical of the current business situation in Germany. The view of global business and Europe is somewhat more positive. Here, "only" 40% and 35% of respondents respectively assess the situation rather negatively.

Future expectations brighten
Despite the generally rather subdued assessment of the business situation, many of those surveyed appear to be convinced that the mood is improving, at least in Europe. When asked about their assessment of future general business development, the values for Europe and the world are more optimistic than in the last survey. The survey participants do not currently expect the situation in Germany to improve.

Respondents were more optimistic about their own company's future expectations for Europe and the global market.

The participants seem to be assuming a moderate short to medium-term recovery of the global economy. The forecasts are more optimistic than the assessment of the current situation. It is striking that the view of the German region is more critical in relation to Europe and the global economy. 28% of those surveyed expect the general market situation in Germany to develop negatively. Only 13% expect the current situation to improve. The figures for Europe and the world are better.

Investment climate remains subdued
The current rather cautious assessment of the economic situation continues to have an impact on the investment climate.

While 22% of participants in the last survey still assumed an increase in personnel capacity (survey 1/2023 = 40%), this figure is currently only 18%. In contrast, 18% even expect a decrease in personnel.

The proportion of respondents planning to invest in machinery is also declining. While 56% of respondents in the last survey still expected to make such investments, this figure has now fallen to 46%.

Different expectations of application industries
The composites market is characterized by a high degree of heterogeneity in terms of both materials and applications. In the survey, the participants are asked to give their assessment of the market development of different core areas.

The expectations are extremely varied. The two most important application areas are the mobility and construction/infrastructure sectors. Both are currently undergoing major upheavals or are affected by declines, which is also clearly reflected in the survey. Growth is expected above all in the wind energy and aviation sectors.

Growth drivers with slight shifts
In terms of materials, there has been a change in the assessment of growth drivers. While the respondents in the last 9 surveys always named GRP as the material from which the main growth impetus for the composites sector is to be expected, the main impetus is now once again expected to come from CFRP or across all materials.

There is a slight regional shift. Germany is seen less strongly as a growth driver. In contrast, Europe (excluding Germany) and Asia are mentioned significantly more.

Composites index points in different directions
The numerous negative influences of recent times continue to be reflected in the overall Composites Index. This continues to fall, particularly when looking at the current business situation. On the other hand, there is a slight improvement in expectations for future market development, although this remains at a low level.

The total volume of processed composites in Europe in 2022 was already declining, and a further decline must also be expected for 2023. This is likely to be around 5% again.

It remains to be seen whether it will be possible to counteract the negative trend. Targeted intervention, including by political decision-makers, would be desirable here. However, this cannot succeed without industry/business. Only together will it be possible to maintain and strengthen Germany as a business/industry location. For composites as a material group in general, there are still very good opportunities to expand the market position in both new and existing markets due to the special portfolio of properties. However, the dependency on macroeconomic developments remains. It is now important to develop new market areas through innovation, to consistently exploit opportunities and to work together to further implement composites in existing markets. This can often be achieved better together than alone. With its excellent network, Composites Germany offers a wide range of opportunities.

The next composites market survey will be published in July 2024.

Hospital germs and pathogens are not always transmitted directly from person to person. They can also spread via germ-contaminated surfaces and objects. Empa researchers, together with the chemical company BASF, Spiez Laboratory and the Technical University of Berlin, have now developed coated textiles that inhibit or even kill pathogens. They could be used as antimicrobial curtains in hospitals in the future.

Countless times a day, patients, visitors and medical staff in hospitals touch surfaces of all kinds. Door handles, railings or elevator buttons can serve as transport vehicles for pathogens such as hospital germs or viruses. Smooth surfaces are comparatively easy to clean after contamination. With porous structures such as textiles, however, this is not that simple. Empa researchers have solved this problem together with experts from BASF, Spiez Laboratory and the Technical University of Berlin: A coating process can now be used to treat fabrics in such a way that bacterial and viral pathogens are killed or inhibited in their growth. In hospitals, the coated textiles could be used in future as antimicrobial curtains between patient beds, for example.

Active for months
"We were looking for a process that reliably prevents germs from contaminating textiles that come into contact with a large number of people during use," explains Peter Wick from Empa's Particles-Biology Interactions laboratory in St. Gallen. In this way, chains of infection could be interrupted in which multi-resistant bacteria or viral pathogens, for example, settle on hospital curtains and can then be spread by people.

The researchers ultimately developed a coating process in which a benzalkonium chloride-containing disinfectant was evenly applied to hospital curtains. After optimizing parameters such as concentration, exposure time, processing pressure and drying, the coating adhered stably to the textile surface. But did the coated textiles also exhibit a germicidal effect? This was to be shown by analyzing the antimicrobial activity of the first fabric samples.

"The results of the laboratory tests were very encouraging," says Wick. When the bacterial cultures of some typical problem germs were incubated with the fabric samples, the coated textiles inhibited the growth of staphylococci and pseudomonas bacteria, for example. "The hospital germs were significantly reduced or even killed after just ten minutes of exposure," says the Empa researcher. Moreover, the coating was also active against viral pathogens: Over 99 percent of the viruses were killed by the coated fabric samples.

Another advantage: The coatings remained effective even after several months of storage. This allows production in stock. With the new process, other textiles, filters or cleaning utensils could also be quickly and safely treated with antimicrobials in the future, for example in the event of an epidemic, emphasizes Empa researcher Wick.

Set against the vast and surreal backdrop of the Black Rock Desert in Nevada, Burning Man is an annual gathering that transforms the flat, barren expanse into a vibrant playground for artistic and creative expression. Here, "Burners" come to both witness and contribute to the ephemeral Black Rock City, which participants build anew each year. With its myriad art installations and performances, Black Rock City is a temporary home for creative minds from around the world.

This year among the large-scale art stood the Living Knitwork Pavilion, an unusual architectural piece crafted from knitted textiles and a lattice network of wood. Developed and built by a team of researchers from the MIT Media Lab and MIT School of Architecture and Planning, and led by PhD student Irmandy Wicaksono, the installation received a 2023 Black Rock City Honorarium. For the team, it was a highly challenging and fulfilling project, full of learning and surprises. Seeing it emerge and illuminate in the middle of the desert was truly magical.

In the Living Knitwork Pavilion, 12 modular fabric panels, known as Knitwork petals, are connected through a central tower. The whole installation stood as a dodecagonal pyramid shade structure, 18 feet tall and 26 feet wide, resembling a teepee. The fabrics were developed using digital machine knitting and a collection of functional and common yarns, including photochromic, luminous, and conductive yarns. Taking inspiration from the intricacy of textile patterns and temple carvings of Indonesia, Wicaksono leveraged the tension between knitted polyester and spandex yarns to create textural textile patterns or reliefs. The fusion of parametric and hand-designed motifs transforms the "Living Knitwork" into a narrative artwork, reflecting both a reverence for ancient artistry and a vision of the future. These reliefs, full of symbols and illustrations, depict 12 stories of the future — from solarpunk cities and bio-machine interfaces to the deep ocean and space exploration.

Burning Man and the Black Rock Desert are famed for their climbing enthusiasts and intense winds. Given that strong winds can make the fabrics behave like sails, exerting significant force, the team designed a structure capable of supporting the weight of many climbers, and withstanding wind speeds of up to 70 mph.

The finalized central structure of the pavilion consists of an asymptotic lattice network of lumber and joint elements, optimized for structural integrity while minimizing material use. The knitwork petals, integrated with double-knit structure and mesh openings, and thermoformed through melting yarns, maintain structural stability. Tailored channels for ropes and cables were also incorporated into the knitting design, ensuring each fabric and electrical component is securely anchored and protected, without compromising visual elegance. Facing winds that reached 36 mph this year, the Living Knitwork Pavilion remained steadfast throughout the Burning Man event, demonstrating its resilience in extreme desert conditions.

In support of Burning Man's push for more sustainable art, the Living Knitwork Pavilion utilized additive manufacturing of digital knitting. This method allowed for the creation of custom multi-layer textiles that are both aesthetic and functional, all while minimizing raw material use and waste. The team incorporated recycled materials in their fabrics, with 60 percent of the yarns coming from recycled plastic bottles. The pavilion also runs entirely on battery power and solar cells. The team worked together with the Solar Library, a sculptural solar panel that distributes energy to other arts on the playa, to eliminate generators and noise while promoting the use of renewable energy sources.

By day, the Living Knitwork Pavilion served as a shade structure, while providing a communal space for meditation and discovery. As the sun shifts through the day, hidden-encrypted textile patterns and visual experience are revealed through photochromism and luminescent glow. As dusk descended upon the desert, the pavilion underwent a metamorphosis, illuminating its surroundings through an immersive lighting and audio system. Through a distributed network of antennas embedded within the central structure and each knitwork petal, the team’s ultimate goal was to create an intimate experience that allows individual and collective movement and activity to influence the overall ambience of the space, involving sound and illumination.

Throughout Burning Man, the pavilion also hosted pop-up events, from yoga sessions, dance performances, live music, and even a wedding ceremony. Unfortunately, in the last two days of the event, a heavy rainstorm hit the Black Rock Desert — a rarity for the event. Yet, this climatic twist worked in favor of the pavilion, helping cleanse its textile surface from the accumulated dust and reviving its vivid blue color.

The result of this grand project is a collaboration that transcends disciplinary boundaries. The research team aims to exemplify the remarkable possibilities that arise when architecture, technology, and textile arts converge and bring communities together.

The interdisciplinary group behind the Living Knitwork Pavilion includes researchers from across the Media Lab, the MIT Center for Bits and Atoms, and the Department of Architecture: Irmandy Wicaksono, Sam Chin, Alfonso Parra Rubio, Nicole Bakker, Erik Strand, Gabriela Advincula, Manaswi Mishra, Age van der Mei, Judyta Cichoka, Tongge Yu, and Angelica Zhang.

Focusing on short-term profit isn’t sustainable. So what can we do to move in the right direction: favour resilience over efficiency in all industries.

We buy cheap products knowing we’ll need to replace them soon. We throw out used items rather than repairing or re-using them. Our employers plan in terms of financial quarters despite hoping to remain relevant and resilient longer-term. Even countries prioritise short-term economic output, focusing on gross domestic product (GDP) above any other indicator.

But does this way of living, working and weighing decisions make sense in the 21st century?

Our global obsession with economic short-term efficiency – and how to transform it – is a conundrum that Professor of Sustainability Management Minna Halme has been thinking about for most of her career. Even as a business school student, she felt flummoxed by how focused her classes were on short-term goals.

'It was about selling more, about maximising shareholder profits, about economic growth – but not really asking, Why? What's the purpose of all this?'

Halme says. 'Even 20-year-old me somehow just felt that this was strange.

'What are we trying to do here? Are we trying to create a better economy for all, or most, people? Whose lives are we trying to improve when we are selling more differently-packaged types of yoghurt or clothes that quickly become obsolete?'

Halme has devoted her career to studying these questions. Today, she is a thought leader in innovative business practices, with recognitions including serving on Finland's National Expert Panel for Sustainable Development and on the United Nation's Panel on Global Sustainability.

Her ultimate goal? Pioneering, researching and advocating for alternative ways of thinking that prioritise values like long-term economic sustainability and resilience – alternatives that she and other experts believe would provide more lasting, widespread benefit to all.

How traditional indicators have failed
One way in which our preference for economic efficiency shapes how we measure a country's overall well-being or status is GDP. This isn't the fault of the originator of the modern concept of GDP, who specifically warned against using it in this way in the 1930s.

'GDP was never meant to tell us about the wellbeing of the citizens of a country,' Halme says. Seventy-five years ago, however, it was easy to conflate the two. Many countries were more committed to redistributing their wealth among their citizens, and population surveys show that until the 1970s, GDP often correlated with general wellbeing.

But with the rise of increasingly heedless free-market capitalism, this became less the case – and GDP's shortcomings became all the more apparent. 'We are in a situation where the wealth distribution is more and more trickling up to those who already have capital. Those who don't have it are in declining economic positions,' Halme says. In fact, the richest 1% of the global population now own nearly half of the world's wealth.

Some governments, such as Finland's, do take indicators of environmental and social progress into account. 'But none is considered as important for decision-making as GDP,' Halme says – and GDP is also considered the arbiter of a government's success. It is that attitude that, through her work advising the Finnish government on sustainability practises as well as in her own research, Halme is trying to shift.

Where industries have failed
Our often-exclusive focus on the economy – and, in particular, on making profits as quickly and efficiently as possible – doesn’t provide a clear picture of how everyone in a society is faring. Worse yet, it has encouraged industries to act with a short-term view that makes for longer-term problems.

Fast fashion is one example. At the moment, supply chains for clothing – as for most other goods – are linear. Raw materials come from one place and are transformed step by step, usually at different factories around the world, using materials, energy and transport that are “cheap” because their high environmental costs aren’t included. They are ultimately purchased by a consumer, who wears the product temporarily before discarding it. To expand profit margins, the industry pushes fast-changing trends. A shocking amount of this clothing ends up in landfill – some of it before it's even been worn.

As the COVID lockdowns showed, this kind of linear supply system isn't resilient. Nor is it sustainable.

Currently, fashion is estimated to be the world's second most polluting industry, accounting for up to 10% of all greenhouse gas emissions. Aalto University researchers have reported that the industry produces more than 92 million tonnes of landfill waste per year. By 2030, that is expected to rise to 134 million tonnes.

Cutting fashion's carbon footprint isn't just good for the environment; it will help the longer-term prospects of the industry itself. 'With this kind of wrong thinking about efficiency, you're eroding the basis of our long-term resilience both for ecology and for society,' Halme says.

Getting out of this trap, she and other researchers say, requires a complete paradigm shift. 'It's really difficult to just tweak around the edges,' she says.

Towards resilience
For several years, Halme researched and studied ecological efficiency, looking at ways that businesses could make more products with a smaller environmental impact. But gradually she realised this wasn't the answer. Although businesses could innovate to have more efficient products and technologies, their absolute use of natural resource use kept growing.

'I began to think, "If not efficiency, then what?"' Halme says. She realised the answer was resilience: fostering ways for systems, including the environment, to continue and even regenerate in the future, rather than continuing to degrade them in the present.

The solution isn’t more of anything, even ‘sustainable’ materials. It’s less.

'The only way to fix fast fashion is to end it,' Halme and her co-authors write. This means designing clothes to last, business models that make reuse and repair more accessible, and prioritising upcycling. Recycling systems also need to be overhauled for when an item really is at the end of its life – particularly regarding blended synthetic fibres, which are difficult to separate and break down.

This would upend the current focus on short-term revenue above all else. And, says Halme, it is one more example of how we need better ways to measure the success of these industries, taking into account factors like resilience and sustainability – rather than just short-term profits.

And while individuals can make an impact, these changes ultimately have to be industry-led.

'Textiles are a good example, because if they break quickly, and if you don't have repair services nearby, or if the fabrics are of such lousy quality that it doesn't make any sense to repair them, then it's too much trouble for most people,' Halme says. 'So most solutions should come from the business side. And the attempt should be to make it both fashionable and easy for consumers to make ecologically and socially sustainable choices.'

What will it take?
The ultimate challenge, says Lauri Saarinen, Assistant Professor at the Aalto University Department of Industrial Engineering and Management, is how to shift towards a more sustainable model while keeping companies competitive. But he believes there are ways.

One option is to keep production local. 'If we compete with low-cost, offshore manufacturing by doing things more locally, and in a closed loop, then we get the double benefit of actually providing some local work and moving towards a more sustainable supply chain,' Saarinen says. For example, if clothing were produced closer to consumers, it would be easier to send garments back for repair or for brands to take back used items and resell them.

Local production is yet another example of the need to rethink how we measure societal success. After all, outsourcing and offshoring in favour of cheaper production may appear to cut costs in short term, but this is done at the expense of what Halme and other experts argue really matters – longer-term economic viability, resilience and sustainability.

Shifting towards this kind of thinking isn't easy. Still, Saarinen and Halme have seen promising signs.

In Finland, for example, Halme points to the start-up Menddie, which makes it easy and convenient to send items away for repairs or alterations. She also highlights the clothing and lifestyle brand Marimekko, which re-sells its used items in an online secondhand shop, and the Anna Ruohonen label, a made-to-measurecollection and customer on-demand concept which creates no excess garments.

It's these kinds of projects that Halme finds interesting – and that, through her work, she hopes to both advocate for and pioneer.

At the moment, she says, these changes haven't yet added up to a true transformation. On a global scale, we remain far from a genuine shift towards longer-term resilience. But as she points out, that can change quickly. After all, it has in the past. Just look at what got us here.

'The pursuit of economic growth became such a dominant focus in a relatively short time – only about seven decades,' she says. 'The shift toward longer-term resilience is certainly possible. Scientists and decision-makers just need to change their main goal to long-term resilience. The key question is, are our most powerful economic players wise enough to do so?'

As part of her research, Halme has led projects pioneering the kinds of changes that the fashion industry could adapt. For example, along with her Aalto colleague Linda Turunen, she recently developed a measurement that the fashion industry could use to classify how sustainable a product really is – measuring things like its durability, how easily it can be recycled, and whether its production uses hazardous chemicals – which could help consumers to decide whether to buy. Her colleagues curated a recent exhibition that showcased what we might be wearing in a sustainable future, such as a leather alternative made from discarded flower cuttings, or modular designs to get multiple uses from the same garment – turning a skirt into a shirt, for example.
 
Because all of this requires longer-term thinking, innovation and investment, industry is reticent to make these shifts, Halme says. One way to encourage industries to change more quickly is with regulation. In the European Union, for example, an updated set of directives now requires companies with more than 500 employees to report on a number of corporate responsibility factors, ranging from environmental impact to the treatment of employees. These rules won't just help inform consumers, investors and other stakeholders about a company's role in global challenges. They’ll also help assess investment risks – weighing whether a company is taking the actions necessary to be financially resilient in the long-term.

Interview on the trade fair landscape for floor coverings in Germany

The effects of the Corona pandemic were felt in almost all areas of social and economic life. The trade fair industry in particular was severely affected, with many events cancelled or postponed. With the return to normality, the question arises as to what significance leading trade fairs will have in the post-Corona era and how the competition between different organisers will develop. For its KLARTEXT interview series, Textination talked to Ms Sonia Wedell-Castellano, Global Director of DOMOTEX Events.

 

After DOMOTEX was unable to take place in 2021 and 2022 due to the pandemic, the trade fair returned in 2023 with a successful event. Nevertheless, the number of exhibitors has almost halved compared to 2020. How do you assess the future importance of leading trade fairs after the industry had to come to terms with online meetings and travel restrictions for a long period of time?

I think it is important to remember that this was the first DOMOTEX since the outbreak of the pandemic, and at a time when the global economic situation is rather difficult. Of course, this situation has made some companies reluctant to participate in DOMOTEX 2023, so we have not yet been able to welcome all companies back as exhibitors at the show. In addition, there were still significant travel restrictions in place at the beginning of the year, for example in China, which simply made it more difficult for our exhibitors to participate in a trade fair abroad. As far as our expectations for the next event are concerned, I can say that many companies - even those that did not exhibit this year - have communicated their interest in wanting to be back at DOMOTEX 2024.
 
We are certain that leading trade fairs and exhibitions in general will continue to be of great importance in the future! You may be able to cultivate existing customers at digital events, but you can't generate new ones. The focus of DOMOTEX is on products you can touch, on the haptic experience on site. You can't transfer that to the digital world. Even the chance encounters at the stand or in the halls do not happen digitally. But a trade fair thrives on personal encounters, personal exchanges. Business is done between people, not between screens. Both exhibitors and visitors have told us quite clearly that they want and need DOMOTEX to be a trade fair where people are present.

 

The degree of internationalisation among DOMOTEX visitors was between 62 and 67 percent in the last three years of the event before the pandemic; in 2023 it even reached 69 percent. Would you agree that leading international trade fairs in Germany are now primarily only important for export-oriented companies? And what does that imply for the economic efficiency of trade fairs?

Certainly, leading international trade fairs in Germany are particularly interesting for export-oriented companies, but not exclusively. That doesn't change anything at all about the profitability of trade fairs. We generate our turnover with all our exhibitors, regardless of whether they are export-oriented or only interested in the Germany-Austria-Switzerland region. That's why satisfied exhibitors are very important to us. And an exhibitor is satisfied when he can do good business or make good contacts at our fairs. It's more and more about the right quality of visitors, less about the quantity. In any case, all our exhibitors very much welcome international visitors!

 

For the 2024 edition, Deutsche Messe has announced that its DOMOTEX concept has been changed to focus on different areas each year: Carpet & Rugs in the odd-numbered years and Flooring in the even-numbered years. Flooring covers wood and laminate flooring, parquet, design flooring, resilient floor coverings, carpets, outdoor flooring and application and installation technology. Carpet & Rugs stands for hand-made carpets and runners as well as for machine-woven carpets.

Yet you say that the Carpet & Rugs segment in particular needs an annual presentation platform, while the flooring segment would like to see DOMOTEX every two years as the central platform for the industry due to longer innovation cycles. Doesn't that actually mean that floor coverings are only in Hannover every other year, but carpets continue to exhibit annually in Hannover? Could you clarify that?

DOMOTEX - Home of Flooring will take place in 2024 and in all even years: This is a DOMOTEX with all exhibitors as we know them from the past. So, from herringbone parquet to outdoor coverings, oriental carpets and contemporary designs - everything, under one roof. In the odd years, i.e. from 2025, there will then be DOMOTEX - Home of Carpets and Rugs, with a focus on suppliers of fitted carpets. The background to this is that the hard flooring industry had wanted DOMOTEX to be held every two years. After this year's DOMOTEX, the suppliers of wall-to-wall carpets have again clearly spoken out in favour of an annual platform. With our new focus model, we are meeting the needs that the market has expressed to us.

 

Messe Frankfurt has declared a new product segment for next year's Heimtextil - interestingly, under the name Carpets & Rugs. While the watchword at DOMOTEX in the even year 2024 is Flooring, Heimtextil offers an alternative trade fair venue for carpets. How do you assess this situation - do exhibitors now have to choose between Hannover and Frankfurt and what does this mean for the split concept?

No, exhibitors from the carpet sector will not have to choose between Hannover and Frankfurt in future - because DOMOTEX is and will remain the home of the entire industry, even in the even years! At DOMOTEX, Home of Flooring means, as I explained earlier, that we present the entire spectrum of floor coverings and carpets. But what is even more important is that we have been told by exhibitors and many visitors that the market does not want to be split up any further. Through the many (small) events, the flooring industry is only competing with itself. To put it bluntly: if only some of the exhibitors take part in ten events, it can't really work. The critical mass is missing. A trade fair is only as good as its participants and they often don't have the time to visit several events.    

 

Another innovation for DOMOTEX is the country focus. What do you expect from this and why did you choose "Insight Italy" for 2024?

With our new special presentation, we want to arouse the curiosity of our visitors - especially retailers, architects and contractors - and highlight the international character of DOMOTEX. After all, what could be more exciting than getting to know a country in depth?  

That is why the INSIGHT concept will in future feature a different country at each DOMOTEX - Home of Flooring. Special exhibition areas will showcase innovations and products, present partnerships with designers and universities, and stage trends. In addition, the conference will provide insights into the respective market and references.  
In 2024, we will start with Italy, a very design-savvy and creative country from which many trends come.

 

Deutsche Messe wants to strengthen the Hannover venue for the leading trade fair DOMOTEX and to hold additional fairs only in Shanghai and in Gaziantep. There will be no Carpet Expo in Istanbul. What influence does the changing entrepreneurial landscape in terms of production countries and markets have on your international concept?

First of all, it must be noted that the business landscape for carpets has not changed in Turkey. Here, only the associations have decided to organise a carpet fair in Istanbul in the future. The background is the continuing visa problem for Turkish exhibitors in Germany as well as the immensely high inflation in Turkey, which makes foreign participation extremely costly for Turkish companies. We would have liked to organise a carpet fair in Istanbul together with the Turkish associations, but not at any price and not on their terms alone. Hannover is and will remain the international platform for DOMOTEX, and we will continue to strengthen this location.

But of course, we also keep an eye on the global market and keep our eyes and ears open at all times, for all our brands, by the way. It was only in this way that DOMOTEX asia/Chinafloor in Shanghai was able to develop into what is now a very successful event. The potential was there, we were in the right place at the right time. If we hadn't seized the opportunity at the time, there would still be a strong floor coverings trade fair in Shanghai - but it would be run by one of our competitors and it wouldn't be called DOMOTEX today.

Many thanks to Ms Sonia Wedell-Castellano for the KLARTEXT.

• For sports and physiotherapy alike

Researchers at ETH Zurich, Empa and EPFL are developing a 3D-printed insole with integrated sensors that allows the pressure of the sole to be measured in the shoe and thus during any activity. This helps athletes or patients to determine performance and therapy progress.

In elite sports, fractions of a second sometimes make the difference between victory and defeat. To optimize their performance, athletes use custom-made insoles. But people with musculoskeletal pain also turn to insoles to combat their discomfort.

Before specialists can accurately fit such insoles, they must first create a pressure profile of the feet. To this end, athletes or patients have to walk barefoot over pressure-sensitive mats, where they leave their individual footprints. Based on this pressure profile, orthopaedists then create customised insoles by hand. The problem with this approach is that optimisations and adjustments take time. Another disadvantage is that the pressure-sensitive mats allow measurements only in a confined space, but not during workouts or outdoor activities.

Now an invention by a research team from ETH Zurich, Empa and EPFL could greatly improve things. The researchers used 3D printing to produce a customised insole with integrated pressure sensors that can measure the pressure on the sole of the foot directly in the shoe during various activities.

“You can tell from the pressure patterns detected whether someone is walking, running, climbing stairs, or even carrying a heavy load on their back – in which case the pressure shifts more to the heel,” explains co-project leader Gilberto Siqueira, Senior Assistant at Empa and at ETH Complex Materials Laboratory. This makes tedious mat tests a thing of the past. The invention was recently featured in the journal Scientific Reports.

One device, multiple inks
These insoles aren’t just easy to use, they’re also easy to make. They are produced in just one step – including the integrated sensors and conductors – using a single 3D printer, called an extruder.

For printing, the researchers use various inks developed specifically for this application. As the basis for the insole, the materials scientists use a mixture of silicone and cellulose nanoparticles.
Next, they print the conductors on this first layer using a conductive ink containing silver. They then print the sensors on the conductors in individual places using ink that contains carbon black. The sensors aren’t distributed at random: they are placed exactly where the foot sole pressure is greatest. To protect the sensors and conductors, the researchers coat them with another layer of silicone.

An initial difficulty was to achieve good adhesion between the different material layers. The researchers resolved this by treating the surface of the silicone layers with hot plasma.
As sensors for measuring normal and shear forces, they use piezo components, which convert mechanical pressure into electrical signals. In addition, the researchers have built an interface into the sole for reading out the generated data.

Running data soon to be read out wirelessly
Tests showed the researchers that the additively manufactured insole works well. “So with data analysis, we can actually identify different activities based on which sensors responded and how strong that response was,” Siqueira says.

At the moment, Siqueira and his colleagues still need a cable connection to read out the data; to this end, they have installed a contact on the side of the insole. One of the next development steps, he says, will be to create a wireless connection. “However, reading out the data hasn’t been the main focus of our work so far.”

In the future, 3D-printed insoles with integrated sensors could be used by athletes or in physiotherapy, for example to measure training or therapy progress. Based on such measurement data, training plans can then be adjusted and permanent shoe insoles with different hard and soft zones can be produced using 3D printing.

Although Siqueira believes there is strong market potential for their product, especially in elite sports, his team hasn’t yet taken any steps towards commercialisation.

Researchers from Empa, ETH Zurich and EPFL were involved in the development of the insole. EPFL researcher Danick Briand coordinated the project, and his group supplied the sensors, while the ETH and Empa researchers developed the inks and the printing platform. Also involved in the project were the Lausanne University Hospital (CHUV) and orthopaedics company Numo. The project was funded by the ETH Domain’s Advanced Manufacturing Strategic Focus Areas programme.

"Shared vision of a true circular economy for the textile industry"

US fashion group PVH has joined the fibre-to-fibre consortium founded by Carbios, On, Patagonia, PUMA and Salomon. The aim is to support the further development of Carbios' biorecycling process on an industrial scale, setting new global standards for textile recycling technologies. PVH owns brands such as Calvin Klein and Tommy Hilfiger. In the agreement signed by PVH Corp, the company commits to accelerating the textile industry's transition to a circular economy through its participation in the consortium.

Carbios is working with On, Patagonia, PUMA, PVH Corp. and Salomon to test and improve its bio-recycling technology on their products. The aim is to demonstrate that this process closes the fibre-to-fibre loop on an industrial scale, in line with sustainability commitments.

The two-year cooperation project will not only enable the biological recycling of polyester articles on an industrial scale, but also develop thorough sorting and disassembly technologies for complex textile waste. Existing members voted unanimously for PVH Corp. to join the consortium, saying the common goal is to support the development of viable solutions that address the fashion industry's contribution to climate change..

Carbios has developed a technology using highly selective enzymes that can recycle mixed feedstocks, reducing the laborious sorting required by current thermomechanical recycling processes. For textiles made from blended fibres, the patented enzyme acts only on the PET polyester contained within. This innovative process produces recycled PET (r-PET) that is equivalent in quality to virgin PET and can be used to produce new textile fibres.

Textile waste treatment and recycling
Globally, only 13% of textile waste is currently recycled, mainly for low-value applications such as upholstery, insulation or rags. The remaining 87% is destined for landfill or incineration. To work on improving textile recycling technologies, consortium members will supply feedstock in the form of clothing, underwear, footwear and sportswear. In 2023, a new PET textile waste facility will be commissioned at the Carbios demonstration plant, notably as part of the LIFE Cycle of PET project co-funded by the European Union.  This is in anticipation of future regulations, such as the separate collection of textile waste, which will be mandatory in Europe from 1 January 2025.

From fibre to fibre: circularity of textiles
Today, the textile industry relies largely on non-renewable resources to produce fibres and fabrics, partly turning to recycled PET bottles for recycled polyester fibres. However, this resource will become scarce as PET bottles are used exclusively for the production of new bottles in the food and beverage industry. In a circular economy, the materials used to produce textiles are obtained from recycled or renewable raw materials produced by regenerative processes. In addition to supplying raw materials for the demonstration plant, the consortium members also aim to produce new products from r-PET fibres using the company's biorecycling process.

"Partnering with Carbios and its consortium members demonstrates our continued commitment to incorporating more circular materials into our collections," said Esther Verburg, EVP, Sustainable Business and Innovation, Tommy Hilfiger Global and PVH Europe. "We are excited to support the development of Carbios' enzymatic recycling technology and to leverage new solutions that can help us drive fashion sustainably."

The Danish company Continuum Group ApS with its subsidiary companies in Denmark (Continuum Aps) and the UK (Continuum Composite Transformation (UK) Limited) wants to give end-of-life wind blades and composites a new purpose, preventing them going to waste. The goal is to reduce the amounts of CO₂ emitted to the atmosphere by the current waste streams, delivering a value to Europe’s Net Zero efforts.

Continuum states that it ensures all wind turbine blades are 100% recyclable and plans to build industrial scale recycling factories across Europe.

Net zero is the phrase on everyone’s lips, and as 2030 rapidly approaches we constantly hear updates about wind energy generating renewable energy that powers millions of European homes – but what happens when those turbine blades reach the end of their lifespan?

Currently the general answer is to put them into landfill or co-process them into cement, but neither is planet friendly. Many countries in Europe look to ban landfill from 2025, so this option is likely to be eliminated in the near future.

Continuum provides an alternative: When the end of their first life arrives, Continuum recycles them into new, high performing composite panels for the construction, and related industries. The vision of the Danes: Abandon the current landfilling, and drastically reduce CO₂ emitted during currently applied incineration & co-processing in cement factories by 100 million tons by 2050, via their mechanical composite recycling technology and their industrial scale factories.  

The technology is proven, patented, and ready to go, says Reinhard Kessing, co-founder and CTO of Continuum Group ApS, who has spent more than 20 years of research and development in this field, and advanced the reclamation of raw materials from wind blades and other composite products and transformation of these materials into new, high performing panel products.

By working with partners, Continuum’s cost-effective solution covers end-to-end logistics and processes. This spans from the collection of the end-of-life blades through to the reclamation of the pure clean raw materials and then the remanufacturing of all those materials into high value, highly performing, infinitely recyclable composite panels for the construction industry or the manufacture of many day-to-day products such as facades, industrial doors, and kitchen countertops. The panels are 92% recycled blade material and are said to outperform competing products.

Nicolas Derrien: Chief Executive Officer of Continuum Group ApS said: “We need solutions for the disposal of wind turbine blades in an environmentally friendly manner, we need it now, and we need it fast, and this is where Continuum comes in! As a society we are rightly focussed on renewable energy production, however the subject of what to do with wind turbine blades in the aftermath of that production has not been effectively addressed. We’re changing that, offering a recycling solution for the blades and a construction product that will outperform most other existing construction materials and be infinitely recyclable, and with the lowest carbon footprint in its class.”

Martin Dronfield, Chief Commercial Officer of Continuum Group ApS and Managing Director of Continuum Composite Transformation (UK) Ltd, adds: “We need wind energy operators & developers across Europe to take a step back and work with us to solve the bigger picture challenge. Continuum is offering them a service which won’t just give their business complete and sustainable circularity to their operations but help protect the planet in the process.“

Each Continuum factory in Europe will have the capacity to recycle a minimum of 36,000 tons of end-of-life turbine blades per year and feed the high value infinitely recyclable product back into the circular economy by 2024/25.

Due to an investment by Climentum Capital and a grant from the UK’s ‘Offshore Wind Growth Partnership’, Continuum are planning for the first of six factories in Esbjerg to be operational by the end of 2024 and for a second factory in the United Kingdom to follow on just behind it. After that they are looking to build another four in France, Germany, Spain, and Turkey by 2030.

As part of their own pledge to promote green behaviour, Continuum have designed their factories to be powered by only 100% green energy and to be zero carbon emitting environments; meaning no emissions to air, no waste fluids to ground, and no carbon fuel combustion.

Nature works often with fiber composites. The construction principles of nature require little material and energy and thus ensure the survival of animals and plant species. Examples include wood, plant stalks, chitinous shells, bones or tissues such as tendons and skin. Mussel shells or spider silk are also composite tissues. We can take advantage of these principles to design and manufacture bio-based, sustainable fiber reinforced composites, which are currently in high demand. Bio-based fiber reinforced composites consist of natural fibers or cellulose fibers embedded in a bio-based matrix. The bio-based components offer properties comparable to those of commonly used glass fiber composites. The German Institutes of Textile and Fiber Research (DITF), together with Arburg GmbH + Co KG, are developing an energy- and material-efficient 3D printing process for manufacturing of such lightweight bio-based fiber composites.

In fiber composites, which occur naturally, reinforcing fibers such as collagen or cellulose fibrils are embedded in a matrix of lignin, hemicellulose or collagen. The fiber strands align with the stress patterns. Tissues are formed mostly via solution-based physio-chemical processes that take place at ambient temperature. Similar to nature, new 3D printing processes with continuous fiber reinforcement also allow the deposition of fiber strands in the right place (topology optimization) and in the appropriate direction in accordance to the load. However, natural fibers such as cellulose fibers are sensitive to higher temperatures. Therefore, they cannot be processed in the commonly employed thermoplastic 3D printing process.

The result of the research work is 3D-printed fiber composite components consisting of cellulose continuous fibers embedded in a cellulose-based matrix. Newly developed 3D-printing process enables to manufacture the composites at ambient temperature. This means that - as in nature - the material and component can be produced simultaneously in a single operation at ambient temperature.

The cellulose fiber strand is first stabilized with a binder for processing in the printer. The specially designed print head transforms the binder into a matrix with which the cellulose continuous fibers are encased. Since the cellulose fibers and the matrix have similar chemical structures, the composite component is particularly stable. The mechanical properties, such as breaking strength, are exceptionally good. The solution-based and energy-efficient manufacturing method developed by the research team can also be used in other composite materials manufacturing processes. It is particularly suitable for processing temperature-sensitive materials that are in high demand, such as natural or cellulose fibers.

The " CellLoes-3D-Druck" research project is funded by the German Federal Ministry of Education and Research as part of the "Biologisierung der Technik" ideas competition.