Textination Newsline

Reset
14 results
(c) Messe Frankfurt Exhibition GmbH
22.12.2020

Decade of Action: Texpertise Network launches further measures to implement the Sustainable Development Goals

Since 2019, the Messe Frankfurt Texpertise Network has been working with the Conscious Fashion Campaign and the United Nations Office for Partnerships to bring the Sustainable Development Goals to all 58 textile events in the network worldwide. Numerous measures have already been implemented. Others are imminent.

Shortly before the start of the COVID-19 crisis, the UN Secretary-General Antonio Gutérrez hailed the start of the Decade of Action. As of 2020, the international community now has just ten years to achieve the 17 Sustainable Development Goals (SDGs) to which the UN Member States committed themselves in the 2030 Agenda. As part of the collaboration with the Conscious Fashion Campaign and the United Nations Office for Partnerships, the Messe Frankfurt Texpertise Network will put the SDGs on the agenda of additional events in December, thus further supporting their implementation in the fashion and textile industry.

Since 2019, the Messe Frankfurt Texpertise Network has been working with the Conscious Fashion Campaign and the United Nations Office for Partnerships to bring the Sustainable Development Goals to all 58 textile events in the network worldwide. Numerous measures have already been implemented. Others are imminent.

Shortly before the start of the COVID-19 crisis, the UN Secretary-General Antonio Gutérrez hailed the start of the Decade of Action. As of 2020, the international community now has just ten years to achieve the 17 Sustainable Development Goals (SDGs) to which the UN Member States committed themselves in the 2030 Agenda. As part of the collaboration with the Conscious Fashion Campaign and the United Nations Office for Partnerships, the Messe Frankfurt Texpertise Network will put the SDGs on the agenda of additional events in December, thus further supporting their implementation in the fashion and textile industry.

Virtual event “Discover the SDGs – To Power the Decade of Action”
From 1-30 December 2020, the Texpertise Network is taking part in the virtual learning experience “Discover the SDGs”, which was initiated by the Conscious Fashion Campaign in collaboration with the United Nations Office for Partnerships. The aim of the event is to strengthen the knowledge and commitment within the fashion industry that is needed to further support the Decade of Action to deliver the Sustainable Development Goals. One component of the event is a virtual and interactive exhibition on the 17 goals, as well as on-demand discussions with industry leaders, United Nations representatives and advocates of the United Nations, including Detlef Braun, Member of the Executive Board, and Thimo Schwenzfeier, Director Marketing Communications Textiles and Textile Technologies at Messe Frankfurt, as well as from Kering, Lenzing, Allbirds, Arch and Hook, Artistic Milliners, Orta, ITL, Vogue Business, CFDA, Collina Strada and the Swarovski Foundation.

“This is a critical time to accelerate partnerships to address the world's biggest challenges – from eliminating poverty, hunger and inequalities to reversing climate change and unsustainable consumption and production practices,” said Annemarie Hou, acting Executive Director of the United Nations Office for Partnerships. “The fashion industry is an important ally for the United Nations in this Decade of Action to deliver the SDGs by 2030.”

Conscious Fashion Campaign becomes a presenting partner of Frankfurt Fashion Week
Joining forces to improve the fashion industry: Frankfurt Fashion Week is positioning itself as the host of the future of fashion and actively driving forward the transformation towards a future-oriented, more sustainable fashion and textile industry. All decision-makers looking to instigate this change will be coming together in Frankfurt am Main from 5-9 July 2021. The initiators of Frankfurt Fashion Week – Messe Frankfurt and the Premium Group – have achieved a real coup: Conscious Fashion Campaign, working in collaboration with the United Nations Office for Partnerships, will be the presenting partner. Messe Frankfurt will build on its collaboration with the United Nations Office for Partnerships. The Sustainable Development Goals (SDGs) will be a prerequisite for exhibitors by 2023. And the Frankfurt Fashion SDG Summit by CFC is set to become the leading international conference for sustainability in the fashion world.

Expansion of internal sustainability communication
17 goals, 58 textile events worldwide, around 600,000 visitors and 23,000 exhibitors in 2019: with its global events, the Messe Frankfurt Texpertise Network offers unique reach for supporting the SDGs, even during the corona pandemic. The participating subsidiary companies, sales partners and Messe Frankfurt partners abroad who organise the relevant events play an important role in this. To actively expand knowledge about and further commitment to the Sustainable Development Goals, the Texpertise Network is organising several online seminars, including for staff members in Argentina, Ethiopia, China, Hong Kong, India, Japan, Russia, South Africa and the USA and thus expanding its internal sustainability communication.

SDG actions up to now
Ever since the expanded collaboration between the Messe Frankfurt Texpertise Network, the Conscious Fashion Campaign and the United Nations Office for Partnerships was announced at the UN headquarters in New York in December 2019, the international Messe Frankfurt textile events have implemented numerous measures to support the SDGs.

At the Messe Frankfurt textile events in Germany alone, a number of things came to fruition: the most recent physical and digital editions of Heimtextil, the leading trade fair for home and contract textiles and Neonyt, global hub for fashion, sustainability and innovation, offered panel discussions, press conferences and video messages, including with the Conscious Fashion Campaign and United Nations Office for Partnerships. An SDG Lounge in the Green Village at Heimtextil and selfie walls with the SDGs inspired exhibitors, visitors and influencers alike to engage with the 17 goals and share them on their social network channels. Podcasts were produced that can still be listened to on the Neonyt and Heimtextil channels and Neonyt also hosted e.g. the influencer challenge “Let's wear the goals!”.

A great deal has also already been achieved internationally: in March 2019, Neonyt organised a showcase with selected Neonyt brands to mark the foundation of the “UN Alliance for Sustainable Fashion” in Nairobi. Techtextil India launched Techtextil NEXT at its 2019 edition, India’s first hackathon for technical textiles and sustainability. Among those who attended were Shrikar Dhole, founder and CEO of the SDG Foundation and Niharika Gautam, who campaigns for the achievement of the SDGs in the fashion industry and co-leads the fashion section of the All Ladies League Delhi. The Heimtextil Russia 2020 Digital Edition was able to attract a prominent figure to give a message of greeting, namely Vladimir Kuznetsov, head of the UN Information Centre (UNIC) in Moscow. The digital edition of Texworld USA (now Texworld New York City) and Apparel Sourcing USA in summer 2020 offered a talk by the Conscious Fashion Campaign and supported the production of a podcast with Claire Kells from the UN Global Compact.

With its SDG actions to date, Messe Frankfurt Texpertise Network is estimated to have reached around 146,000 visitors, 170,000 followers on social media channels and 65,000 subscribers to newsletters about participating events at home and abroad. Added to this is also the approx. 2.5 million followers of the influencers involved in the actions.

Venue Messe Frakfurt (c) Mese Frankfurt GmbH
22.09.2020

Heimtextil 2021 to be held in May

The next Heimtextil has been postponed from January and will now be held concurrently with Techtextil and Texprocess 2021 in Frankfurt from 4 to 7 May 2021. This will result in exciting synergistic effects for the sector.
 
The current situation with respect to the corona pandemic and the associated international travel restrictions have caused Messe Frankfurt to postpone the next Heimtextil, the world’s biggest trade fair for home and contract textiles, from the planned dates in January until 4 to 7 May 2021.
     

The next Heimtextil has been postponed from January and will now be held concurrently with Techtextil and Texprocess 2021 in Frankfurt from 4 to 7 May 2021. This will result in exciting synergistic effects for the sector.
 
The current situation with respect to the corona pandemic and the associated international travel restrictions have caused Messe Frankfurt to postpone the next Heimtextil, the world’s biggest trade fair for home and contract textiles, from the planned dates in January until 4 to 7 May 2021.
     
“The bulk of the international home and contract textiles sector want us to hold Heimtextil 2021. Many companies are hoping to give their businesses a boost by taking part in the fair following the restart. And we consider it a greater obligation than ever before that we play our part in this”, explains Detlef Braun, Member of the Executive Board of Messe Frankfurt. “However, the current travel restrictions and the renewed increase in the number of infections represent a big hurdle for our very international trade fair. We are in constant contact with our exhibitors and the appropriate authorities and will do everything in our power to ensure a safe and successful Heimtextil 2021.”

Over 90 percent of exhibitors come to Heimtextil in Frankfurt from outside Germany. As part of the preparatory work for an international trade fair of this kind in January, it is necessary, for example, to commission stand-construction companies, ship the goods and book flights and hotels in September. Thus, in view of the current travel restrictions, holding Heimtextil 2021 in May instead of January offers greater planning certainty for all involved.
 
“The trend-oriented order cycles of the home and contract textiles sector require an annual event towards the beginning of the year. Techtextil and Texprocess are biennial trade fairs and are next due to be held in May 2021. For Heimtextil, this is an opportunity to join forces with the two internationally successful textile trade fairs and present the entire textile value chain simultaneously at Frankfurt Fair and Exhibition Centre”, says Olaf Schmidt, Vice President Textiles and Textile Technologies.

Additionally, holding Heimtextil concurrently with Techtextil, the leading international trade fair for technical textiles and nonwovens, and Texprocess, the leading international trade fair for processing textile and flexible materials, offers a host of exciting synergistic effects for the sector.

The close proximity to suppliers and buyers of technical textiles and nonwovens with innovative functionalities, as well as machines and the latest technologies for processing textile and flexible materials, is certain to generate interesting new perspectives for both visitors and exhibitors of Heimtextil. Indeed, the two textile fairs already aim at the home-textile sector with the ‘Hometech’ segment.
 
“We are confident that the situation with respect to the corona pandemic will have eased significantly by May, next year, and are looking forward to holding a successful and safe event together with our partners from the sector”, says Olaf Schmidt.

NEU: Nextrade - the digital marketplace
For the first time, Messe Frankfurt will provide a supplementary digital service in connection with Heimtextil 2021: Nextrade, an order and data-management portal offering new opportunities through digital 24/7 business relationships between trade-fair participants, especially against the background of the Covid-19 pandemic. There, dealers can place their orders with suppliers around the clock and, therefore, do so independently of any official pandemic regulations applying at the time. Nextrade also offers suppliers completely new sales and distribution channels, especially internationally. Nextrade was launched in conjunction with the Ambiente, Tendence and Nordstil consumer-goods and lifestyle trade fairs. As the first digital B2B market place for home and living, the portal brings together demand and supply from the whole sector and thus produces great value added for both sides:: www.nextrade.market

Techtextil / Texprocess
At the biennial Techtextil, the leading international trade fair for the sector in Frankfurt am Main, international exhibitors present the complete spectrum of technical textiles, functional apparel textiles and textile technologies for all areas of application. Techtextil is held concurrently with Texprocess, the leading trade for the garment and textile processing industry, which is aimed primarily at manufacturers of garments, fashions, upholstered furniture and leather products.

More information:
Heimtextil 2021
Source:

Messe Frankfurt GmbH

(c) Messe Frankfurt
14.05.2019

Prize winners of the “Textile Structures for New Building” have been chosen

Eight projects receive awards in the "Textile Structures for New Buildings” competition. For the 15th time, the competition for young talent during Techtextil will honour innovative approaches and excellent material solutions from the world of textile construction.
 
The winners of the student competition “Textile Structures for New Building” have now been decided. An international jury of renowned civil engineers and architects has awarded six prizes and two commendations. On the occasion of Techtextil, which will take place in Frankfurt am Main from 14-17 May 2019, the student competition organised jointly by the international association TensiNet as sponsor and Techtextil will award prizes for the 15th time for innovative ideas for building with textiles and textile-reinforced materials.

Eight projects receive awards in the "Textile Structures for New Buildings” competition. For the 15th time, the competition for young talent during Techtextil will honour innovative approaches and excellent material solutions from the world of textile construction.
 
The winners of the student competition “Textile Structures for New Building” have now been decided. An international jury of renowned civil engineers and architects has awarded six prizes and two commendations. On the occasion of Techtextil, which will take place in Frankfurt am Main from 14-17 May 2019, the student competition organised jointly by the international association TensiNet as sponsor and Techtextil will award prizes for the 15th time for innovative ideas for building with textiles and textile-reinforced materials.

‘We're really pleased that, together with the international association TensiNet, we are once again able to sponsor students who have submitted work of a very high quality. Presenting these awards during Techtextil also gives young students and professionals at the start of their careers the chance to come into contact with other universities, the textile technology industry and the construction industry’, explains Michael Jänecke, Director Brand Development Technical Textiles & Textile Processing at Messe Frankfurt.

The submitted works covered a very wide range of services and variety of topics and focused among other things on material applications, building designs, utilisation concepts and environmental solutions as well as assembly and construction concepts.
All prizes and commendations will be presented at a Techtextil ceremony on 14 May 2019 at 4 p.m. as well as during a special show in the foyer of hall 4.2.

Micro architecture
One prize was awarded to the project ‘Airdapt’. Rebecca Schedler from the Weißensee Kunsthochschule Berlin developed an adaptable kinetic wall system that offers the possibility of dividing large rooms into smaller working areas that can become more or less transparent and more or less sound-absorbing depending on requirements.

Macro architecture
The first prize in this category goes to Hugo Cifre from the Universidad Europea de Madrid/Espacio La Nube and Miguel Angel Maure Blesa from the Universidad Politécnica de Madrid for the project ‘Bubble’. This pneumatically supported walk-in cuboid has a square layout and a height of approx. 4 metres. The entrances are elegantly integrated into the geometry and become effective when the cuboid is under slight positive air pressure. Attracted by the unusual object, visitors are literally ‘sucked into’ the interior.

Second prize goes to Thitiwut Pakdee, Surakist Hunpaisarn and Chonticha Wimonchailerk from the Thai Thammasat University for their work ‘Membrane Shelter for Shipyard’, which provides a membrane canopy for the site of a former shipyard in Ayutthaya (Thailand) to protect the plant from direct sunlight, wind and rain. The concept was inspired by the sails and waves of classic shipbuilding.

Ruichen Tang from the Escuela Técnica Superior de Arquitectura de Madrid has been awarded third prize for the entry ‘Tensegrity Cloud’.
The visual lightness of the ‘basic modules’ formed by this design, which consist of a textile-covered steel frame, is supplemented by a structural advantage, namely that the forces within the overall self-stabilising system balance each other out.

Urban Living – City of the Future
Based on this year's special Techtextil theme, Masa Zujovic, Isidora Kojovic and Nevena Jeremic from the University of Belgrade – Faculty of Architecture (Serbia) will receive an award for their ‘Voro-Membrane’ design. What at first glance seems convincing as an aesthetic solution for providing shade in public street spaces is based on the mathematical pattern of Voronoi structures. The resulting exciting interplay of light and shadow could be further explored in an urban context and applied to a wide variety of situations.

Material innovations
In this category, Magdalena Wierzbicka from the Dutch Piet Zwart Institute has been awarded a prize for her project ‘Woven Spaces - Porcelain Textiles’. Here, the jury honours the fact that the contribution draws on the Thuringian tradition of porcelain lace from the late 19th century and transforms it into a modern design language.

Commendation
The project ‘A Catalyst for Urban Renewal’ by Galen Rochon from Canada’s Dalhousie University – School of Architecture receives a commendation. In this design for the Prince of Wales Bridge in Ottawa, an industrial monument that has lain unused for 20 years, various possibilities were shown for hanging double-curved membrane surfaces in the existing, regularly structured truss construction and stiffening them if necessary.

Commendation
The design ‘XCape’ submitted by Lobke Beckfeld from the Weißensee Kunsthochschule Berlin also received praise. It presents a hybrid vehicle whose space is generated by variable folding configurations and can be used in a variety of ways.

Prizewinners can look forward to prize money totalling 8,000 euros.

(c) Messe Frankfurt Exhibition GmbH
30.04.2019

SUSTAINABILITY A MAJOR TOPIC AT TECHTEXTIL AND TEXPROCESS

"Sustainability at Techtextil" and "Sustainability at Texprocess" are the two topics by which these leading international trade fairs for technical textiles and non-wovens, and for the processing of textile and flexible materials, will be explicitly turning their focus for the first time onto their exhibitors' approaches to sustainability. To this will be added a broad complementary programme on this topic. Among those contributing will be major players in the industry, such as Kering, Lenzing and Zalando.

"Sustainability at Techtextil" and "Sustainability at Texprocess" are the two topics by which these leading international trade fairs for technical textiles and non-wovens, and for the processing of textile and flexible materials, will be explicitly turning their focus for the first time onto their exhibitors' approaches to sustainability. To this will be added a broad complementary programme on this topic. Among those contributing will be major players in the industry, such as Kering, Lenzing and Zalando.

Fibres made of recycled polyester, bio-based high-tech textiles, waterconserving dyeing and finishing processes, functional and work clothing, using little or no solvents and adhesives: in the field of technical textiles, and when processing textile and flexible materials, more and more firms are adopting approaches to greater sustainability. Through "Sustainability and Techtextil" and "Sustainability at Texprocess" the leading international trade fairs, from 14 to 17 May, will be demonstrating exactly these approaches taken by their exhibitors. In addition, numerous event formats will be taking up the topic of sustainability at both fairs.

Fair guide for selected exhibitors
In the run-up to Techtextil and Texprocess exhibitors at both fairs were able to submit their approaches and evidence of their work on every aspect of sustainability to the fairs' organisers. An independent, international jury of experts on sustainability assessed the submissions, in accordance with the relevance and validity of current national and international product-sustainability labels, such as currently mainly Bluesign, Cradle-to-Cradle, EU Eco Label, ISO 14001, GOTS, GRS as well as SteP by Oeko-Tex.

Overall, 47 firms were selected, including 44 exhibitors at Techtextil and three at Texprocess. Visitors who are interested will find the selected firms in their own Fair Guide, which will be available at the Fair, via filter function under "Sustainability" in the online visitor search facility, and on both fairs' apps. In addition, the exhibitors so selected will be publicizing their participation at their exhibition stands.

Members of the international jury of experts: Chairman: Max Gilgenmann, Consulting Service International Ltd. (Germany and China); Claudia Som, Empa (Switzerland); Jan Laperre, Centexbel (Belgium); Heike Illing-Günther, Textile Institute of Saxony (Sächsisches Textilinstitut e.V., Germany); Karla Magruder, Fabrikology (USA); Lauren Zahringer, SAC Social Apparel Coalition (Netherlands).

Techtextil Forum featuring theme of sustainability
Taking "Towards sustainability" as its motto, the Techtextil Forum on 14 May between 11 a.m. and 3 p.m. will be providing a series of contributions devoted exclusively to sustainable textile innovations. Chaired by Braz Costa, managing director of the Portuguese technology centre CITEVE, among the topics on the programme will be: textile recycling (TWD Fibres, Velener Textil), sustainable construction with wool (Minet S.A., Romania), sustainable textile coatings (Centexbel), biopolymers (RWTH Aachen University), traceability of GMO-free cotton (Hohenstein Institute) and low-cost, bio-based carbon fibres (Jules Verne Research Institute, France).

Techtextil Innovation Award
For the first time the Techtextil Innovation Award will be presented to two firms in the category of sustainability. The winners will be announced and the awards presented on the first day of the fair during the opening ceremony. During the whole time of the fair visitors will also be able to find out about the prize-winners and their award-winning projects at the Techtextil Innovation Award Exhibition Area in Hall 4.2.

Texprocess Forum with branch of Fashionsustain Conference
Through a branch of Fashionsustain Berlin, Messe Frankfurt's conference on every aspect of sustainable textile innovations, the Texprocess Forum on the morning of the 14 May will be devoted exclusively to the theme of sustainability in the textile and fashion industries in all its aspects. The first keynote, "Sustainable innovation – a matter of survival", will come from Micke Magnusson, co-founder of the Swedish start-up We are Spindye. Next, posing the question "Is Sustainability the Key to Textile Innovations?", will come a discussion by leaders in the industry such as Clariant Plastics and Coatings, Indorama, Lenzing, Perpetual Global, Procalçado S.A., Kering und Zalando. Fashionsustain will be chaired among others by Karla Magruder, founder of Fabrikology International.

Innovation Roadshow features sustainable footwear production
Next at the Fashionsustain Conference fibre manufacturer Lenzing, knitting-machinery producer Santoni and shoe-component manufacturer Procalçado S.A. will be presenting the Innovation Roadshow, entitled "The Future of Eco-Conscious Footwear Manufacturing." The roadshow will be supported by the Messe Frankfurt Texpertise Network. It will feature examples of the sustainable production process of a shoe, thus demonstrating how a fundamental change to sustainability can already be a reality in the fashion and textile industries today. The panel will be chaired by Marte Hentschel, founder of Sourcebook, the B2B network for the fashion industry.

Kettherstellung (c) Schmitz Textiles Kettherstellung (c) Schmitz Textiles
23.04.2019

Interview with CEO Stefan Ruholl (Schmitz Textiles): We are Textile

  • Innovations for Indoor and Outdoor Applications

At the beginning of 2018, the textile company Schmitz-Werke GmbH & Co. KG, Emsdetten, was restructured. In order to be able to react more quickly and flexibly to the markets and their demands, the brands drapilux, swela and mobiltex have since been combined under Schmitz Textiles.

Managing Director of this legally independent company is Stefan Ruholl, who has been working for Schmitz-Werke for more than 30 years, answering the questions of Textination. In 1996 he became head of the finishing department, three years later head of production and development for the textile finishing division, in the beginning of 2000 technical director, and finally 2018 he took over the management of the business unit and of the company Schmitz Textiles.

  • Innovations for Indoor and Outdoor Applications

At the beginning of 2018, the textile company Schmitz-Werke GmbH & Co. KG, Emsdetten, was restructured. In order to be able to react more quickly and flexibly to the markets and their demands, the brands drapilux, swela and mobiltex have since been combined under Schmitz Textiles.

Managing Director of this legally independent company is Stefan Ruholl, who has been working for Schmitz-Werke for more than 30 years, answering the questions of Textination. In 1996 he became head of the finishing department, three years later head of production and development for the textile finishing division, in the beginning of 2000 technical director, and finally 2018 he took over the management of the business unit and of the company Schmitz Textiles.

Schmitz Textiles is a family business that has been offering textile solutions for indoor and outdoor applications for more than 90 years. If you had to introduce yourself in 100 words to someone who doesn't know the company, what makes you unique?
As an almost fully integrated manufacturer in Germany, we have advantages that many other market players are likely to envy. We can respond flexibly, technically and with good service to the needs of our customers. Under the drapilux brand, we distribute intelligent design textiles for the contract sector, outdoor and sun protection fabrics under the swela brand and textiles for the automotive segment under the still young label mobiltex. All brands benefit from the broad know-how in production and product development. A few years ago, Germany as production location may have been regarded more negatively as a pure cost factor, but today we see this as valued by our partners as a clear strategic advantage.

In which product areas do market and partners particularly challenge you?
And with which product innovations in the field of technical textiles do you think you can move most?

In each of our fields of activity, we are confronted with comprehensive challenges. At drapilux, for example, we have to meet strict safety requirements in the context of fire protection certifications for the use of our materials on cruise ships and have invested massively in this subject. The sun protection sector is characterized by high demands on color and light fastness combined with optimum resilience - here we were able to gain a major technological advantage with the change from acrylic to polyester qualities years ago.
With the new, award-winning development of our convertible top fabric for mobiltex, also based on polyester, we were able to realize product properties that are completely new in this form in this segment.

For which socially relevant topics do you see particularly great need for innovation in the upcoming 10 years
and what is your assessment that the textile industry will be able to offer solutions with its products?

When we look at the next ten years, then it is surely the topic of sustainability that is already omnipresent today. At the moment we are living in a phase where we want sustainable products on the one hand, but, on the other hand, the willingness to pay higher prices for them is not yet pronounced and people tend towards staying with conventional products. This will change. Sustainable products from companies that really live sustainability in the dimensions of ecology, economy and society will win the race. The textile industry offers the best conditions to turn this vision into reality - albeit under investment in production and research and development.

Today, product and technology innovations mean to a large extent digitalization of production and business processes.
New business models often aim at verticalization and demand the path to batch size 1 - what does this mean for Schmitz Textiles?

For an industrial company with a B2B focus, such as Schmitz Textiles, "batch size 1" must be answered with a certain bandwidth. However, in principle, this topic is not new to us, for example in yarn dyeing, we can couple micro-installations for larger batches - and conversely control correspondingly smaller batches through our process chain. In the digital printing sector for the contract business, we are very individually and customer-oriented positioned with a minimum quantity of 25 meters. For our sister company and customer markilux we are supplier for their "Color on Demand" offer for the individual awning cloth with a choice of 1625 RAL colors. With an industrial production scale, you can hardly get much closer to "lot size 1".

To break new ground means decisiveness, overcoming fears - and with that the courage to fail. Not every project can succeed.
Which entrepreneurial decision are you particularly happy about having made it in retrospect?

If we look further back, about ten years ago, the decision to invest in digital printing and to build up know-how and our own production capacities was the right one. Having passed through these learning curves enables us today to expand our offer into the outdoor market without major problems. We are currently more convinced than ever that by entering the automotive segment with the still young mobiltex brand, we have established a new, important keystone for the long-term future of Schmitz Textiles.

The textile industry has been growing steadily worldwide for decades. The consumption of chemical and textile fibres more than quadrupled between 1975 and 2016. In terms of sustainability, there is, to put it mildly, a mixed feedback for our industry.
What is Schmitz Textiles concentrating on in order to fulfil their social responsibility?

If textiles are produced exclusively in Germany, the regulatory framework already requires a certain sustainable orientation. But of course, there is also room for maneuver. In order to meet the high demands of a sustainable and environmentally friendly production, we operate a very high expenditure. For example, all dyestuffs and textile auxiliaries are first checked for compliance with laws and regulations and for environmental and occupational safety aspects before they are used in-house. In addition, voluntary measures were implemented in the area of production long before legislation came into force, such as regenerative thermal post-combustion for the post-treatment of process exhaust air from finishing plants. This ensures that no harmful emissions are caused by exhaust air, waste water or noise. Many projects have also been successfully implemented for energy recovery from process waste water and process exhaust air. All process waste is either returned to the production workflow, recycled or professionally disposed of. A contribution to environmental protection, that should not be underestimated, is the use of synthetic fibres (here: polyester), which can be modified with much less chemicals than natural fibres and are much more durable.
 
The next Techtextil is just around the corner. What are your expectations at the Frankfurt trade fair?
We are a young but at the same time an almost 100-year-old company, having emerged from the corporate reorganization of Schmitz-Werke GmbH + Co. KG on January 1, 2018. Consequently, we are exhibiting for the first time as Schmitz Textiles GmbH + Co KG with our three brands mobiltex, swela and drapilux. We want to present ourselves as a textile competence center. However, the automotive textiles theme will be somewhat in the foreground. We are exhibiting a complete convertible roof with our mobiltex 388 soft top fabric, which was nominated for the German Innovation Award 2019 by the German Design Council, and we are confident that we may accept an award at the end of May.

 

Source:

The interview was conducted by Ines Chucholowius, CEO Textination GmbH

As part of its Newsline, Textination will give innovation leaders of the industry a special place to talk about success, experiences, forecasts and trends.

(c) Messe Frankfurt Exhibition GmbH
09.04.2019

Clothing Production in the Future

Individualisation, automation and digitalisation: micro-factories are the way forward for the future of clothing production and will be the main theme of Texprocess in Frankfurt am Main from 14 to 17 May 2019.

“Send your favourite design to the manufacturer today via an app and wear your individually designed, perfectly fitting trainers or shirt tomorrow.
It’s a long time since this was just a pipe dream for the future,” says Michael Jänecke, Director Brand Management Technical Textiles and Textile Processing at Messe Frankfurt. “Behind it, however, lies a host of complex processes, involving production, processing and logistics. Micro-factories, based on networked and integrated procedures, represent the progressive way of making textile processing quicker, more flexible and, because it is more local, also more sustainable; whilst, at the same time, producing personalised products.”

Individualisation, automation and digitalisation: micro-factories are the way forward for the future of clothing production and will be the main theme of Texprocess in Frankfurt am Main from 14 to 17 May 2019.

“Send your favourite design to the manufacturer today via an app and wear your individually designed, perfectly fitting trainers or shirt tomorrow.
It’s a long time since this was just a pipe dream for the future,” says Michael Jänecke, Director Brand Management Technical Textiles and Textile Processing at Messe Frankfurt. “Behind it, however, lies a host of complex processes, involving production, processing and logistics. Micro-factories, based on networked and integrated procedures, represent the progressive way of making textile processing quicker, more flexible and, because it is more local, also more sustainable; whilst, at the same time, producing personalised products.”

In a total of four micro-factories at the up-coming Texprocess, trade visitors will be able to get an idea of how integrated textile processing works and where micro-factories are already being used.


Digital Textile Micro-Factory: on-demand and virtual reality
Following the success of the last event, Texprocess, in collaboration with the German Institutes of Textile and Fibre Research in Denkendorf (Institute für Textil- und Faserforschung Denkendorf – DITF) and partners from industry, will once again be presenting a ‘Digital Textile Micro-Factory’ display - and thus fully networked production chains - live in Hall 4.1. New this year: the ‘Digital Textile Micro-Factory’ will showcase three production lines – one for apparel manufacture, one for 3D-knitted shoes and one for processing technical textiles, largely for the motor-vehicle and furniture industries.

‘Fashion Line’ integrates virtual prototypes and customer interaction
The fashion industry plays a central role in the ‘Digital Textile MicroFactory’. The customer’s digital doppelganger is becoming more and more important in development departments in the apparel industry as the starting point for individualised and perfectly fitting clothes and for links with finishing departments. In the context of the micro-factory’s production line, it is the key feature.

The production line demonstrates the various stages involved, including CAD/Design, printing, cutting out, assembly, finishing and labelling. New approaches also combine 3D simulations of clothing with direct data transfer in virtual reality (VR) and augmented reality (AR). Instead of presenting the customer with physical examples of the clothing to be produced, the examples are visualised as virtual objects. And during the production process, the customer has the opportunity for direct input into the design of the product in question. This direct interaction between the 3D simulation of an item, the representation in VR/AR displayed on the customer’s own hardware and the direct impact on the production process has never been shown before in this way. Partners of the ‘Fashion Line’ are: Assyst (CAD/design), Mitwill (materials), Caddon, ErgoSoft, Mimaki and Multiplot (printing), Zünd (cutting), Juki and Stoll (assembling), Veit (finishing) and Vuframe (AR/VR).

3D knitting on the way to Industry 4.0
From 3D image to finished prototype in 18 minutes: the future is here in the world of knitting too! The ‘Digital Textile Micro-Factory’ at Texprocess and Techtextil shows a workflow which enables 3D-knitted uppers for shoes to be produced directly from the customer’s own particular foot measurements.
The ‘3D-knitting Line’ of the micro-factory demonstrates the process from the 3D model to the creation of a geometrically accurate knitting pattern by the software, based on the 3D data set, and the development of a specification of the final knitting data, through to the manufacture of a 3D-knitted prototype. Knitting is the additive manufacturing process for textiles. The ‘3D-knitting Line’ is partnered by Stoll.

Processing technical textiles in the micro-factory
Industry 4.0 live: the focus of the third production line of the ‘Digital Textile Micro-Factory’ 2019 is on the automated processing of technical textiles, personalised for the individual customer, taking us right through to the finished product. Trade visitors will see here on-demand inkjet printing and networked machines with integrated sensors, which are linked through a bus system – a future-oriented topic for integrated manufacturing. A robot arm with a special claw for use with textiles sorts the cut items as they emerge from the cutter in a free-moving open shuttle. The items to be sewn are conveyed automatically to the sewing stations. Tracing and tracking procedures show the progress of each order through the individual stages of the manufacturing process using an auto ID. In addition, the display will also show how creative ideas from the Cloud can be incorporated in the manufacture of technical products. Technology meets creativity. Partners of the production line: Mitwill (design), ErgoSoft (RIP), Caddon (colour management), HP (large-format inkjet printing), Zünd (cutting), Dürkopp Adler (networking, integration of an open shuttle, sewing), Veit (finishing), Next Robotics (material handling).

Smart Textiles Micro-Factory: industrial-type production of smart textiles
In their ‘Smart Textiles Micro-Factory’, located in the walkway between Halls 4.1 and 5.1, the Institute for Textile Technology (ITA) at the RWTH Aachen University, together with partners from industry and research, will be producing a ‘smart’ pillow which, with the help of integrated LEDs, provides new ways of interaction. With this demonstration, the partners in the project will present an exemplary, industrial-style manufacturing process for a smart textile from design to finished product. The prototype of the pillow was displayed in advance at Heimtextil 2019. The following are all involved in the ‘Smart Textiles Micro-Factory’: the Institute for Textile Technology (ITA) of the RWTH Aachen University (project coordination), Gerber Technology GmbH (cutting), the Korea Institute for Industrial Technology KITECH (electronics), VETRON TYPICAL Europe GmbH (sewing), Wear it GmbH (product design and concept) and ZSK Stickmaschinen GmbH (embroidery).
 
World of Digital Fashion: customisation of apparel
Six companies have grouped together under the ‘World of Digital Fashion’ umbrella. They work in areas of visualisation, CAD-cutting systems, automated body measurement, cutting out and process automation. Together, they will be showcasing, in Hall 4.0, ways of integrating and combining their products in a variety of workflows within the value creation chain and will enable visitors to experience what the digital process chain is like in practice. The focus will fall particularly on the customisation of apparel and fashion items. Partners of the ‘World of Digital Fashion’ are: Browzwear Solutions and Tronog (visualisation), Software Dr. K. Friedrich (CAD), Fision (automated body measurement), Bullmer (cutting), as well as Gertsch Consulting and Mode Vision (process automation).

Micro-factory presented by Efka and Gemini: easy to implement
Manufacturers of drive mechanisms for industrial sewing machines Efka will,in collaboration with CAD suppliers Gemini, be showcasing the production of a knitted garment that can be individually designed. The core element of their micro-factory, which closely reflects industrial practice, is the link to the sewing stage of production, something which is already available today as an economic, partially automated solution. The display presents a solution that can be easily implemented and adopted by most companies, using already available resources.

 

More information:
Texprocess
Source:

Messe Frankfurt Exhibtion GmbH

Textile innovations ‘made in Germany’ in demand in the USA (c) KameraStudio for Messe Frankfurt Exhibition GmbH
05.06.2018

Textile innovations ‘made in Germany’ in demand in the USA

‘High-Tex from Germany’ at Techtextil North America and Texprocess Americas shows again how innovative the German textile industry is.

Back to the USA: ‘High-Tex from Germany’ made a guest appearance at Techtextil North America and Texprocess Americas in Atlanta for the second time from 22 to 24 May 2018. At the special exhibition organised by the Federal Ministry of Economics and Energy (Bundesministerium für Wirtschaft und Energie – BMWi) in cooperation with the Association of the German Trade Fair Industry (Messeausschuss der Deutschen Wirtschaft e.V. – AUMA), a total of 66 companies presented technical textiles, nonwovens, textile-processing machines, smart textiles and textile-research projects to the trade visitors. The textile sector made its first appearance in the USA in 2000. This was followed by highly successful presentations in Shanghai in 2002, in Mumbai in 2007 and in Moscow in 2012.

‘High-Tex from Germany’ at Techtextil North America and Texprocess Americas shows again how innovative the German textile industry is.

Back to the USA: ‘High-Tex from Germany’ made a guest appearance at Techtextil North America and Texprocess Americas in Atlanta for the second time from 22 to 24 May 2018. At the special exhibition organised by the Federal Ministry of Economics and Energy (Bundesministerium für Wirtschaft und Energie – BMWi) in cooperation with the Association of the German Trade Fair Industry (Messeausschuss der Deutschen Wirtschaft e.V. – AUMA), a total of 66 companies presented technical textiles, nonwovens, textile-processing machines, smart textiles and textile-research projects to the trade visitors. The textile sector made its first appearance in the USA in 2000. This was followed by highly successful presentations in Shanghai in 2002, in Mumbai in 2007 and in Moscow in 2012.

“Taking ‘High-Tex from Germany’ to Atlanta again was a very good decision. The southeast of the USA has a long tradition of textile manufacturing. It is home to many companies that are always on the lookout for innovative textiles and machines for textile production and processing”, explained Detlev Rünger, German Consul General in Atlanta during the ‘High-Tex from Germany’ press conference. “Fairs bring people together. And this was evident here in Atlanta. With the overseas exhibition programme, we give small to medium-sized companies the chance to show their products in foreign markets”, said Patrick Specht of the Trade Fair Policy and EXPO Participations division of the BMWi.

“‘High-Tex from Germany’ within the framework of Techtextil North America and Texprocess Americas was a very good platform for our small to medium-sized companies. After Techtextil and Texprocess in Frankfurt, these two events are the second-most important editions of the trade-fair duo. ‘High-Tex from Germany’ came fully up to our expectations and anyone who failed to take part missed a great opportunity to be noticed”, said Marc Lorch, Member of the Board of Zwissler Holding, who represented the participating companies as exhibitor president.

Michael Metzler, Sales President of ZSK Stickmaschinen, confirmed this saying, “A German pavilion of this scope makes us extremely visible. Thanks to the excellent organisation, we were also able to concentrate on promoting our company and products.” In addition to the appealing exhibition-stand concept and the excellent organisation, the companies taking part were particularly pleased with the high visitor standard. “We regularly exhibit at Techtextil North America but taking part in ‘High-Tex for Germany’ resulted in our best ever day at a fair here. The pavilion is a real eye-catcher”, said Thomas Wiederer, Area Sales Manager, Brückner Textile Technologies. “The visitors to our exhibition stand were very interested in our products. We gained potential customers and were able to make numerous high-grade contacts. The level of interest shown in our highly innovative e-textile solutions, which are completely new in the sector, was very high. We are looking forward to the follow-up phase”, said Andreas Lanyi, Vice President Digital Unit and Internet of Things of the Hamburg-based start-up, Lunative Laboratories.

Besides gaining new customers, the focus of the companies taking part in ‘High-Tex from Germany’ was on cultivating customer relations. “The German pavilion in Atlanta once again gave us a good opportunity to get to know the US market better. We have had a factory in the vicinity of Atlanta for two years now and aim to expand our network in the long term”, said Ronny Schröder, Associate Sales Director Technical and Comfort Products, Sandler. “We like making presentations within the framework of the German pavilion very much”, added Georg Voggenreiter, Technical Sales, Maschinenfabrik Herbert Meyer. “Once again, ‘High-Tex from Germany’ was a good starting point for cultivating contacts with our customers in the USA.”

The companies taking part in ‘High-Tex from Germany’ made their presentations on around 1,300 square metres of exhibition space with their own exhibition stands, with selected exhibits on a central ‘Plaza’, in guided tours and no less than 35 lectures. Additionally, the German Institutes of Textile and Fibre Research (Deutsche Institute für Textil- und Faserforschung – DITF), the Association of the Finishing, Yarns, Woven Fabrics and Technical Textiles Industry (Industrieverband Veredlung, Garne, Gewebe und Technische Textilien – IVGT), the Tübingen-Reutlingen-Zollernalb location agency and the German American Chamber of Commerce of the Southern U.S. provided insights into current research projects and offered information about the sector.

Messe Frankfurt intensifies its textile-related involvement in Africa © Pixabay
31.10.2017

MESSE FRANKFURT INTENSIFIES ITS TEXTILE-RELATED INVOLVEMENT IN AFRICA

  • Morocco, Ethiopia and South Africa: Network comprises the most important textile regions in Africa
  • Emerging continent: positive forecasts in the textile sector

First Ethiopia, then South Africa and shortly Morocco: Messe Frankfurt is expanding its portfolio of textile trade fairs on the African continent. With its forthcoming cooperation with the two trade fairs Maroc in Mode and Maroc Sourcing, the global market leader for textile trade fairs is expanding its presence in North West Africa. ‘In future, our network will extend across important textile regions in Africa and encompass the leading trade fairs on the emerging continent’, explains Olaf Schmidt, Vice President Textiles & Textile Technologies at Messe Frankfurt. ‘With our commitment to Ethiopia, South Africa and, in future, Morocco, we have created excellent conditions to support the positive developments in Africa's textile industry’.

  • Morocco, Ethiopia and South Africa: Network comprises the most important textile regions in Africa
  • Emerging continent: positive forecasts in the textile sector

First Ethiopia, then South Africa and shortly Morocco: Messe Frankfurt is expanding its portfolio of textile trade fairs on the African continent. With its forthcoming cooperation with the two trade fairs Maroc in Mode and Maroc Sourcing, the global market leader for textile trade fairs is expanding its presence in North West Africa. ‘In future, our network will extend across important textile regions in Africa and encompass the leading trade fairs on the emerging continent’, explains Olaf Schmidt, Vice President Textiles & Textile Technologies at Messe Frankfurt. ‘With our commitment to Ethiopia, South Africa and, in future, Morocco, we have created excellent conditions to support the positive developments in Africa's textile industry’. Demographic change, increasing urbanisation and shifts in economic forces - these global developments are promoting the growth of the African economy and having a significant impact on the textile industry.

According to the UN Economic Report on Africa 2017, Africa has the fastest growing population. The current population of around 1.2 billion people will more than double by 2050. The number of working people on the African continent is also increasing rapidly. The largest working population (1.1 billion) in the world is predicted to be in Africa by 2034. These demographic changes are causing personal and business consumption to increase sharply, and this will primarily benefit regional economic markets. 

Morocco: Maroc in Mode & Maroc Sourcing

Morocco in particular offers great potential for the clothing trade: Morocco's proximity to important fashion markets such as the EU and the USA, various free trade agreements and a recent economic growth rate of four per cent (between 2010 and 2015, Nachrichten für den Außenhandel, NfA, 19 January 2017) create a secure business climate. The Maroc in Fashion and Maroc Sourcing trade fairs, which have been in existence since 2014, currently showcase around 120 exhibitors from Morocco, Tunisia, Egypt, Turkey, China and a number of Western European countries. The extensive product portfolio inspires with its strong expertise in fashion. The trade fairs are regarded as a hotspot for fast fashion and not only present fashion, denim, lingerie and knitwear, but also sports and casualwear, workwear and accessories. Messe Frankfurt will agree on a cooperation with AMITH (Association Marocaine des Industries du Textile et de l’Habillement), the organiser of the event, for the next edition. The trade fair will take place on 26-27 October 2017 at the Exhibition Park Hassan Circuit in Marrakesh. 

South Africa: Source Africa & ATF Expo

South Africa is the continent's strongest economic power and one of the largest consumer markets. The country has the most powerful retail sector and is the best networked of all African countries. This international networking and its regional free trade agreements make South Africa an important hub for trade with other African countries as well as neighbouring Pacific countries such as the Arabian Peninsula and India.

With the recently approved takeover of the Source Africa and ATF fairs, Messe Frankfurt is driving the exchange between international and regional buyers, manufacturers and suppliers in this region. Source Africa was founded in 2014 as a trade fair for African producers of fabrics, accessories, clothing, shoes and leather items. It appeals not only to African trade buyers but also to international manufacturers of clothing and fashion. The fifth edition of the fair will take place on 20-21 June 2018 at the International Convention Center (CTICC) in Cape Town. ATF Expo will open its doors at the same venue from  21 to 23 November 2017. Ever since 1998, this trade fair has offered an internationally-oriented product range of fabrics, clothing, shoes, leather goods and accessories as well as services for a predominantly local and regional purchasing community.

Ethiopia: successful start for Texworld, Apparel Sourcing and Texprocess

In eastern Africa, Ethiopia has developed into an attractive contract manufacturing country for clothing and leather goods thanks to the government's strategy of focusing on light industry. Ethiopia also benefits from free trade agreements such as AGOA that are aimed at promoting the African economy. With the Africa Sourcing and Fashion Week (ASFW), Messe Frankfurt has had a strong partner at its side ever since the latest edition in October 2017. Offshoots of the three trade fair brands Texworld, Apparel Sourcing and Texprocess were integrated into the Africa Sourcing & Fashion Week for the first time. It is a sourcing platform for mainly European and US fashion companies. The seventh edition brought together around 200 international exhibitors from 25 countries in Addis Ababa's Millennium Hall. Clothing fabrics, contract manufacturing, fashion and accessories were exhibited as well as machinery for contract manufacturing, CAD/CAM systems, printers, printing inks and accessories. In addition, the trade fair also impressed visitors with a fashion show, a series of lectures, a trend section and a matchmaking platform.

Messe Frankfurt: A strong presence in global textile markets

With a portfolio of over 50 international textile trade fairs, Messe Frankfurt is the global market leader in trade fairs for the textile industry. In 2016, around 19,500 exhibitors and approx. 477,000 visitors came to the events in Europe, North America and Asia. With the name Texpertise Network, the textile event offer of Messe Frankfurt covers the entire value creation chain – from apparel fabrics and fashion to home and contract textiles, technical textiles and the processing and care of textiles. The trade fairs include the successful brands Texworld, Apparel Sourcing, Ethical Fashion Show, Greenshowroom, Intertextile, Yarn Expo, Leatherworld, Emitex, Avantex, Avanprint, Heimtextil, Intertextile Home Textiles, Interior Lifestyle, Home Textiles Sourcing, Techtextil, Texprocess, Simatex, Confemaq and Texcare.

Maroc in Mode & Maroc Sourcing: www.marocsourcing.ma
Source Africa & AFT: www.sourceafrica.co.za / www.atfexpo.co.za
Africa Sourcing & Fashion Week: www.asfw-online.com

08.08.2017

INDIA'S TEXTILE AND CLOTHING INDUSTRY STRONGLY SUPPORTED

  • Textile companies comparatively broadly placed 
  • Garment sector scores too little internationally 

New Delhi (GTAI) - India is one of the world's largest manufacturers of textiles. Cotton fabrics and home textiles are among the export hits. The clothing industry plays a comparatively small role and threatens to fall behind in competition. Both areas are required to produce higher qualities and more sustainable. The Ministry of Textiles supports the fragmented industry. Foreign suppliers and buyers can explore the market at trade fairs.

  • Textile companies comparatively broadly placed 
  • Garment sector scores too little internationally 

New Delhi (GTAI) - India is one of the world's largest manufacturers of textiles. Cotton fabrics and home textiles are among the export hits. The clothing industry plays a comparatively small role and threatens to fall behind in competition. Both areas are required to produce higher qualities and more sustainable. The Ministry of Textiles supports the fragmented industry. Foreign suppliers and buyers can explore the market at trade fairs.

The Indian textile and clothing industry is of an overall economic importance. It accounts for 14% of the total industrial production and employs directly 51 million people. Additional further 68 million people in households and micro enterprises are working for the industrial companies. Because the national economy as a whole needs to create about 12 million additional jobs per year, the government has chosen the textile industry as an employment motor. India, in contrast to the textile giant PRC, has high advantages with its labor cost.

 
The availability of natural materials such as cotton, jute and silk is a further advantage of the textile industry, which can look back on a long tradition of processing. India is now the world's largest producer of cotton. In the cultivation year 2016/17 year (4.1 - 31.3) estimated 5.9 million tons are expected to be harvested.

The cotton will be processed into yarns and fabrics. For the production of yarns, 61 million spindles (measured in spindle equivalents) are available. In 2015/16, they spun about 5.7 million t of yarn, of which 4.1 million t are made out of cotton fibers. The production of cotton cloths was about 38 billion sqm., mainly produced in decentralized weaving mills with simple mechanical looms. The global trend in clothing, however, goes to artificial fibers. In order to protect their domestic production the Ministry of Finance levies tariffs.

Textile industry with its own ministry and many promotional programs 
The Ministry of Textiles subsidizes the sector through several programs, which support the technical modernization, the construction of industrial parks, qualification, training and marketing. Garment factories may even be reimbursed for duties and fees paid. For this purpose the budget of the Ministry of Textiles was once again significantly increased in the financial year 2017/18.

The textile and clothing industry does not only want to score on the domestic market, it also wants to play a bigger international role. In a five-year plan, the Ministry of Textiles had targeted an expansion of exports to USD 64 billion by 2016/17. This target has not yet been achieved, in 215/16 the exports of textiles and clothing amounted to USD 37.6 billion. The exports of textiles even shrank against the year before. 

Textile and clothing industry in India (financial years from April to March) 
  2014/15 2015/16
Export of textiles in USD Billion  21.7 20.6
Imports of textiles in USD Billion 5.5 5.4
Export of clothing in USD Billion 16.8 17.0
Imports of clothing in USD Billion 0.5 0.6
Change in the production of textiles (in %) 3.7 2.2
Change in the production of clothing (in %) 0.2 14.7

Sources: Ministry of Textiles, Ministry of Statistics and Programme Implementation

The local garment industry has good chances of development on a large and growing domestic market. According to industry estimates the retail sector sold clothing worth approximately USD 45 billion in 2016. Experts say the world's fifth-largest market is expected to grow well above 10% in the medium term. The backlog of the 1.3 billion inhabitants is not yet covered. The trade imports international branded goods mainly from China and Bangladesh. Standard articles and custom-made products are sewn by the local industry.

Garment sector with opportunities and problems 
Cheap wages are a location advantage. They vary however very different within the subcontinent. The statutory minimum wage regulations differ between the 29 federal states. In addition the person's age, the company membership and abilities are used to calculate the minimum wage.

Due to the increasing production costs in China, labor-intensive manufacturing is moving to more favorable locations. Not only labor costs play a major role here. The complex labor law strongly restricts the efficiency of labor markets in India. Investors consider the labor law, logistics and the structure of supply chains as to be difficult. The World Bank found in its study "Stitches to Riches" in 2016 (see https://www.openknowledge.worldbank.org/handle/10986) that Bangladesh, Indonesia, Cambodia and Vietnam, surpass the competitor India in the points quality, delivery times, reliability and sustainable social responsibility.

India is also missing free trade agreements (FTAs) which facilitate access to international markets and regulate them reliably. The European Union and India have been negotiating as an example a comprehensive FTA for over 10 years with longer interruptions.

Fragmented sector structure with international Champions 
Information on the number of companies, their size classes and investment volumes are not available. Smaller textile companies and retailers are partially not registered and do not pay taxes. Medium-sized companies are very flexible, but they need to   mechanize, automate and upgrade technically in order to survive.
Larger companies look back on their long-standing tradition and have developed into internationally networked corporations. According to the Indian financial service Moneycontrol, the three largest corporations in the clothing industry are: KPR Mills (last net sales circa USD 300 million), Page Industries (USD 270 million) and Gokaldas Exports (USD 170 million); In the textile sector in general: Bombay Rayon (some USD 640 million), Sutlej Textiles (USD 350 million), SEL Manufacturing (USD  300 million), Mandhana Industries (USD 250 million); in the knitting sector: Nahar Industrial Enterprises (USD 270 million), Rupa (USD 160 million); Cotton spinning: Vardhman Textiles (USD 860 million), Trident (USD 560 million), Indo Count (USD 310 million); Spinning of synthetic fibers: RSWM (USD 450 million), Indorama (USD 390 million), Sangam (USD 230 million); Weaving and other processes: Alok Industries (USD 1.8 billion), Welspun (USD x750 million), Garden Silk (USD 370 million); Other areas: Arvind (USD 830 million), Nahar Spinning (USD 310 million), JBF Industries (USD 550 million), Bombay Dyeing (USD 280 million).

Foreign textile companies invest and explore
The government is promoting the "Make in India" campaign in the textile sector for foreign direct investments. Company foundations are for 100% in foreign hands (see http://www.makeinindia.com/sector/textiles-and-garments). The sector attracted USD 2.4 billion from 2000 to 2016 in FDI.

Foreign companies can explore the markets at various trade fairs. The textile ministry wants to expand the “Textiles India”, which took place in Gandhinagar (Gujarat) in June 2017, to a mega-event (https://www.textilesindia2017.com). The international garment industry also met at the same time at the „India International Garment Fair" (http://www.indiaapparelfair.com).

The "National Garment Fair" will take place from July 10th to 12th in Mumbai (http://cmai.fingoh.com/event/65th-national-garment-fair-1/Registration). And Messe Frankfurt is organizing "Techtextil India" from September 13th to 15th in Mumbai. Here German exhibitors can participate in a community stand (http://www.auma.de/de/messedatenbank/seiten/moesetailseite.aspx?tf=135499).

Internet addresses
Name Internet address Remarks
Germany Trade & Invest http://www.gtai.de/Indien Foreign trade information for the German export economy
AHK Indien http://www.indien.ahk.de Starting point for German companies 
Ministry of Textiles http://www.texmin.nic.in Ministry
Office of Textile Commissioner http://www.txcindia.gov.in Authority
Confederation of Indian Textile Industry http://www.citiindia.com Textile confederation
Textile Association India http://www.textileassociationindia.org Textile industry association
The Clothing Manufacturers of India http://www.cmai.in Clothing industry association

 

Source:

Thomas Hundt, Germany Trade & Invest www.gtai.de

Ariane5 © ESA_Stephane Corvaja 2016
09.05.2017

BAGS PACKED FOR SPACE: TEXTILES NEEDED FOR A MISSION TO MARS

  • Techtextil and Texprocess present ‘Living in Space’ in cooperation with ESA and DLR 
  • Nutrition, mobility, fashion and living: technical textiles make settlements in space possible

Beam me up, Scotty: a large amount of material has to be transported for a journey into space – and technical textiles account for a large proportion of them. Examples of the parts and products in which they are to be found will be on show at the ‘Living in Space’ exhibition during this year’s Techtextil und Texprocess (9 to 12 May 2017), which has been organised by Messe Frankfurt in cooperation with the European Space Agency (ESA) and the German Aerospace Centre (DLR). Among the exhibits to be seen are materials and technologies from Techtextil and Texprocess exhibitors in a ‘Material Gallery’, architecture for space by Ben van Berkel, space-inspired fashions and an original Mars Rover.

  • Techtextil and Texprocess present ‘Living in Space’ in cooperation with ESA and DLR 
  • Nutrition, mobility, fashion and living: technical textiles make settlements in space possible

Beam me up, Scotty: a large amount of material has to be transported for a journey into space – and technical textiles account for a large proportion of them. Examples of the parts and products in which they are to be found will be on show at the ‘Living in Space’ exhibition during this year’s Techtextil und Texprocess (9 to 12 May 2017), which has been organised by Messe Frankfurt in cooperation with the European Space Agency (ESA) and the German Aerospace Centre (DLR). Among the exhibits to be seen are materials and technologies from Techtextil and Texprocess exhibitors in a ‘Material Gallery’, architecture for space by Ben van Berkel, space-inspired fashions and an original Mars Rover. And – even without having completed a dizzying astronaut training programme – visitors can take a journey through space to Mars via virtual-reality glasses.

“At the ‘Living in Space’ exhibition, Techtextil and Texprocess visitors can see examples of textile materials and processing technologies in an application-oriented setting. In cooperation with our partners and exhibitors, we have created an informative and entertaining area, the like of which has never been seen before at Techtextil and Texprocess”, explains Michael Jänecke, Brand Manager, Technical Textiles and Textile Processing, Messe Frankfurt. Given that technical textiles are to be found in almost every sphere of human life, the materials and processing technologies shown are oriented towards the ‘Architecture’, ‘Civilization’, ‘Clothing’ and ‘Mobility’ areas of application.

Ideal homes in space

Visitors can get an idea of how building in space could function at the ‘Architecture’ area curated by Stylepark architecture magazine. Lightweight construction and canopy specialist MDT-tex joined forces with star architect Ben van Berkel of the international UNStudio firm of architects to create a ‘Space Habitat’ especially for Techtextil. Comprising 60 individual modules, each of which is double twisted and under tension, the lightweight pavilion has an area of 40 square metres and consists of specially designed aluminium profiles covered with PTFE sheets. MDT-tex designed the fabric especially for the pavilion in an extremely light grammage without sacrificing its high-temperature resistance and technical properties.

Ultra-lightweight materials play a leading role in space travel because the lighter the space capsule’s load, the cheaper the transport. Reclining in comfortable seats, visitors to the Space Habitat can also travel to Mars using virtual-realist glasses and, at the same time, find out more about technical textiles and their processing in space.

Hightech-Fashion in orbit

No one likes to be too hot or too cold. Space-wear should not only protect the wearer from extreme temperatures but also regulate their body temperature, drain off moisture and be durable and easy to clean. All the better, then, if it also looks good, as shown by the designs in the ‘Clothing’ segment of the exhibition. The ESMOD Fashion School from Berlin presents outfits made by students within the framework of the ‘Couture in Orbit’ project (2015/2016), which was organised by ESA and the London Science Museum. Additionally, the POLI.design centre of the Politecnico di Milano (Milan University) presents outfits from the followup project, ‘Fashion in Orbit’ under the scientific supervision of Annalisa Dominoni and the technical supervision of Benedetto Quaquaro in cooperation with ESA and garment manufacturer Colmar.

The Hohenstein Textile Institutes present two models from the Spacetex research project, within the framework of which astronaut Alexander Gerst tested the interaction of body, apparel and climate under conditions of weightlessness during the ‘Blue Dot’ mission. In this connection, the model, ‘Nostalgia’ by Linda Pfanzler (Lower Rhine University) reminds the wearer of the earth with an integrated library of fragrances. The suits of the ‘Dynamic Space’ collection by Rachel Kowalski (Pforzheim University) contain electrodes that stimulate important muscle groups under conditions of weightlessness. The outfits by Leyla Yalcin and Sena Isikal (AMD Düsseldorf) come from the ‘Lift off’ collection created in cooperation with Bremen-based silver-yarn manufacturer Statex. They include a sleeping bag for astronauts made from silver-coated textiles, which can also be used as an overall and protects the wearer from electro-magnetic radiation. Thanks to the silver threads, another garment, a raincoat reflects light and stores the wearer’s body heat.

Material Gallery: fibers for space

In addition to the exhibits at the special exhibition, around 40 Techtextil and Texprocess exhibitors offer ideas for fibre-based materials and processing technology suitable for use in space in a ‘Material Gallery’. For the ‘Civilization’ segment, they include spacer fabrics for growing vegetables, for ‘Mobility’ a carbon yarn, which was used to make a fairing for the solid-fuel booster rocket of the Ariane 6. The Material Gallery also shows fibre-composite structures made of carbon fibres, such as a robot arm, a whole-body suit that transmits the wearer’s movements to a 3D model in real-time, functional apparel textiles with flame-retardant, anti-bacterial and temperature-regulating properties, and membrane systems for ventilating aircraft.

Exhibits from ESA, DLR and Speyer Museum of Technology, including an original Mars Rover and space suits, make the exhibition an extraordinary experience. The exhibits are supplemented by impulse lectures by ESA experts for technology transfer throughout the fair.

 

Texprocess 2017 © Messe Frankfurt Exhibition GmbH
18.04.2017

DIGITAL TEXTILE PRINTING A FOCAL-POINT THEME AT TEXPROCESS

  • First European Digital Textile Conference at Texprocess
  • Exhibitors present the latest digital-printing Technologies

Colour and function: digital textile printing is one of the focal-point themes at this year’s Texprocess. For the first time, the World Textile Information Network (WTiN) is holding the European Digital Textile Conference at Texprocess. And there will be a separate lecture block on digital printing in the programme of the Texprocess Forum. Moreover, the Digital Textile Microfactory in Hall 6.0 will present a textile production chain in action – from design, via digital printing and cutting, to making up. As well, numerous exhibitors, including Brother, Epson, Ergosoft and Mimaki, will be showing digital printing technologies.

  • First European Digital Textile Conference at Texprocess
  • Exhibitors present the latest digital-printing Technologies

Colour and function: digital textile printing is one of the focal-point themes at this year’s Texprocess. For the first time, the World Textile Information Network (WTiN) is holding the European Digital Textile Conference at Texprocess. And there will be a separate lecture block on digital printing in the programme of the Texprocess Forum. Moreover, the Digital Textile Microfactory in Hall 6.0 will present a textile production chain in action – from design, via digital printing and cutting, to making up. As well, numerous exhibitors, including Brother, Epson, Ergosoft and Mimaki, will be showing digital printing technologies.

„“We are expanding our programme on the subject of digital printing in response to the growing demand for digitalised technologies for processing garments, technical textiles and flexible materials. This programme is of particular interest to manufacturers of technical textiles and companies that process textiles”, says Michael Jänecke, Head of Brand Management, Textiles and Textile Technologies, Messe Frankfurt.

Elgar Straub, Managing Director, VDMA Textile Care, Fabric and Leather Technologies: “Thanks to digital textile printing, it is now possible to print apparel, shoes and technical textiles directly. Given the general trend towards individualisation, demand for individualised products is increasing in the apparel industry. This is turning digital textile printing into one of the future-oriented technologies for companies that process garments and textiles.”

European Digital Textile Conference at Texprocess

In cooperation with Texprocess and Techtextil, the World Textile Information Network (WTiN) will hold the European Digital Textile Conference at Texprocess for the first time. The focus of the conference will be on digital textile printing for adding functional and decorative features to technical textiles. The WTiN European Digital Textile Conference will take place in ‘Saal Europa’ of Hall 4.0 from 09.00 to 16.30 hrs on
10 May. Tickets for the conference can be obtained from WTiN under
https://www.digitaltextileconference.com/edtc2017/

The subjects to be covered in the lectures include direct yarn colouring in the embroidery plants (Coloreel, Sweden), plasma pre-treatment for textiles before digital printing (GRINP, Italy) and chemical finishing for textiles using inkjet printing technology (EFI-REGGIANI, USA).

Texprocess Forum to spotlight digital printing technology

Digital printing technology will also be the subject of a separate lecture block at Texprocess Forum. At this international conference, experts from science and industry will focus on the latest findings relating to subjects of major importance to the sector in over 30 lectures and panel discussions on all four days of the fair. Texprocess Forum is free of charge for visitors of Texprocess and Techtextil and will be held in Hall 6.0. For the first time, three partner organisations are organising the lecture blocks: DTB – Dialogue Textile Apparel, the International Apparel Federation (IAF) and the World Textile Information Network (WTiN).

Digital Textile Microfactory

In cooperation with the German Institutes of Textile and Fibre Research Denkendorf (DITF) and renowned textile companies, Texprocess presents the complete interlinked textile production chain – the Digital Textile Microfactory – live in Hall 6.0. The digital-printing station shows large-scale inkjet printing in the form of sublimation printing on polyester and pigment printing on cotton and blended fabrics. Production orders can be combined flexibly and printed colour consistently with a variety of printing parameters. Ensuring optimum printing results at this station are hardware and software partners, Mimaki and Ergosoft, and Coldenhove and Monti Antonio. In addition to the Microfactory partners, other renowned companies, including Brother and Epson, will be showing state-of-the-art printing processes for textiles and apparel at Texprocess.

Digital-printing Outlook

Originally developed for fashion fabrics, digital textile printing is also used for printing technical textiles, such as sports clothing, and textiles for the automobile industry whereby the primary focus is on functionalising textiles. For example, swimwear can be made more colour fast to resist frequent contact with water and chlorine, and exposure to the sun. Also, textiles can be finished by applying chemicals via an inkjet printer and thus be given dirt-repellent, antimicrobial and fire-retardant properties. Additionally, using an inkjet printer in the finishing process is advantageous in terms of sustainability and efficiency.

Apparel Show © Messe Frankfurt Exhibition GmbH
31.01.2017

TEXPROCESS RECORDS HIGHEST NUMBER OF REGISTRATIONS IN ITS HISTORY

Living in Space: special event at Techtextil showcases textile processing technologies for the space industry: Some four months before the start of Texprocess (9 to 12 May 2017), the leading international trade fair for processing textile and flexible materials reports the highest number of registrations in its history and thus continues its pattern of growth. Even now, more floor space has been booked than the previous edition had in total. “It is well worth our while continually developing Texprocess further, with regard to the technologies and processes on display, the hall layout and the complementary programme. With this fourth edition, Texprocess is now firmly established in the marketplace and is attracting other market leaders in the sector to Frankfurt,” says Olaf Schmidt, Vice President Textiles & Textile Technologies, Messe Frankfurt.

Living in Space: special event at Techtextil showcases textile processing technologies for the space industry: Some four months before the start of Texprocess (9 to 12 May 2017), the leading international trade fair for processing textile and flexible materials reports the highest number of registrations in its history and thus continues its pattern of growth. Even now, more floor space has been booked than the previous edition had in total. “It is well worth our while continually developing Texprocess further, with regard to the technologies and processes on display, the hall layout and the complementary programme. With this fourth edition, Texprocess is now firmly established in the marketplace and is attracting other market leaders in the sector to Frankfurt,” says Olaf Schmidt, Vice President Textiles & Textile Technologies, Messe Frankfurt.

Texprocess reports growing numbers of companies signing up, particularly in the CAD/CAM and Cutting, Making, Trimming (CMT) product groups. Technologies and material for Sewing, Joining and Fastening are growing steadily, too.

Among the companies that have already signed up are: Amann, Astas, assyst/Human Solutions, Barudan, Brother, bullmer, Caron Technology, Dürkopp Adler, Epson, Filiz Makina, Gemini CAD Systems, Gerber Technology, Gütermann, Juki, Kuris Spezialmaschinen, MACPI, Malkan, Mitsubishi, Morgan Tecnica, Pfaff, Serkon Tekstil Makina, SMRE, Strima, Tajima, Teseo, Tetas, Veit, Zünd.
The range of products at Texprocess once again covers all stages in the value-creation chain for textile goods, from design, IT, cutting out, sewing, seaming, embroidery and knitting to finishing, textile printing and logistics.

Change in placement for CAD/CAM and Cutting, Making, Trimming
To make the profiles of Techtextil and Texprocess even sharper, the bonding and separating technology, CMT (Cutting, Making, Trimming), CAD/CAM and printing product segments will be concentrated together at Texprocess in hall 4.0. Thus, visitors will find Techtextil exhibitors from these segments at Texprocess. These product groups will be deleted from the Techtextil nomenclature.
Apart from this change, the overall concept behind the halls at the previous event will be retained: trade visitors will find Design, IT, CAD/CAM, CMT and Printing as well as the special IT@Texprocess section in hall 4.0. Exhibitors of machines and accessories for sewing and seaming will be presenting their products in hall 5.0 and 5.1; and hall 6.0 will showcase embroidery technology, together with finishing techniques and logistics for textiles.

The technologies of textile processing for space travel
Both exhibitors and visitors at Texprocess will, this year, have the benefit of a rather special experience at the show: under the heading 'Living in Space', Techtextil will be showcasing the wide variety of applications for technical textiles in space travel, together with the processing involved. This is a cooperative venture between Techtextil, The European Space Agency (ESA) and the German Aerospace Centre (DLR). Close to the location for, amongst others, exhibitors of functional apparel textiles in Hall 6.1, and based on the areas of application for technical textiles, a special, interactive area is to be built to display, with the help of four thematic sections, the high-tech textiles and textile processing technologies that have emerged from and for space travel. The highlight of this area is a virtual-reality experience in which visitors to Techtextil and Texprocess get to go on a virtual journey through the universe, where they will learn about the application of technical textiles in space travel and the processing required to make them.

Complementary programme with focus on Digital Printing and international Innovative Apparel Show
Digital Printing will be one the thematic focusses of the Texprocess complimentary programme. The sector's information service, the World Textile Information Network (WtiN) will, for the first time, be organising the European Digital Textile Conference at Texprocess. The conference will centre round technologies for digital printing on textiles and will be held on Wednesday 10 May in the Saal Europa in hall 4.0.
And digital printing on textiles will also be taken up as a topic in a dedicated series of lectures forming part of the Texprocess Forum. The forum offers, in hall 6.0, expert lectures on current issues in the sector, on all days of the trade fair. For the first time, the programme will have been designed jointly by three partners: the Dialog Textil-Bekleidung (DTB), die International Apparel Federation (IAF) and the World Textile Information Network (WTiN).

Following on from the success of its first edition, the Innovative Apparel Show is to be continued and set on an international footing. For the first time, there will be, as well as a German university, three European universities / colleges from outside Germany, showcasing, on the catwalk, their fashion designs from functional textiles and the processing stages that go into making them. The show will take place on all days of the trade fair. The participating universities / colleges are: Accademia Italiana, Florence / Italy; ESAD College of Art and Design, Matosinhos / Portugal; Esmod Paris/France, and the University of Trier / Germany. The young designers will be displaying designs relating to the three key themes of 'Textile Effects', 'Creative Engineering' and 'Smart Fashion'. Visitors will be able to vote for the public's award throughout the duration of the trade fair and the award will be presented at the last fashion show.

With the Texprocess Innovation Award, Messe Frankfurt seeks, for the fourth time, to honour the best new technological developments in the field. Submissions for the award may be made up until 20 February. The competition is open both to exhibitors at Texprocess 2017 and to other companies, institutes, universities, colleges and private individuals, who are not otherwise exhibiting at the fair. The awards in the various categories will be presented during the joint opening ceremony for Texprocess und Techtextil, on 9 May 2017. At the same time, there will be a special display area in Hall 4.0, showcasing all the prize-winning products at Texprocess.

Visitors will, once again, find many new IT solutions for the apparel industry in the IT@Texprocess section in Hall 4.0, where exhibitors will be presenting product life-cycle management systems (PLM), 'Cloud' applications and 3D CAD systems, which make it possible to create tailor-made clothes in real time and without the need for a Fitting.

Sewing and apparel-making technology record significant rise in Sales According to information provided by the Textile Care, Fabric and Leather Technologies section of the VDMA (Association of German machinery and plant manufacturers), conceptual partner of Texprocess, the German sewing and apparel-technology industry achieved an increase in turnover of 15.9 percent compared to the previous year in the period from January to October. “With export sales of € 523 million, Germany is in third place amongst exporting nations worldwide, behind China and Japan,” observes Elgar Straub, General Manager of the VDMA Textile Care, Fabric and Leather Technologies Association. “Our member companies are outstandingly well placed amongst the international competition. Above all, that is because they are continually developing and innovating. The individualisation of apparel, the digitalisation of the value creation chain and new technologies, such as digital printing and sustainable processing technologies, are currently at the heart of our members' planning for innovation.”

Texprocess will again be taking place in parallel to Techtextil, leading international trade fair for technical textiles and nonwovens (also from 9 to 12 May 2017). In all, 1,662 exhibitors from 54 different countries attended Texprocess and Techtextil in 2015, together with a total of 42,000 trade visitors. Over 13,300 of them came to see Texprocess. Added to that, there were around 7,600 additional visitors, who came across from the concurrently held Techtextil.

 

Apparel Show @ Messe Frankfurt Exhibition GmbH
24.01.2017

TECHTEXTIL ON A GROWTH CURVE

Living in Space: Techtextil presents technical textiles in the aerospace industry in cooperation with ESA and DLR

More exhibitors and a journey to Mars: visitors and exhibitors can look forward to an even bigger event and a completely new trade-fair experience at the coming Techtextil from 9 to 12 May 2017. With around four months still to go before the leading international trade fair for technical textiles and nonwovens opens its doors, the booked space already exceeds the total area of the last edition in 2015. Moreover, the extensive complementary programme of events is set to be distinguished by a variety of innovations in 2017. The highlight of this year’s Techtextil will be the special ‘Living in Space’ event in cooperation with the European Space Agency (ESA) and the German Aerospace Centre (Deutsches Zentrum für Luft- und Raumfahrt – DLR).

Living in Space: Techtextil presents technical textiles in the aerospace industry in cooperation with ESA and DLR

More exhibitors and a journey to Mars: visitors and exhibitors can look forward to an even bigger event and a completely new trade-fair experience at the coming Techtextil from 9 to 12 May 2017. With around four months still to go before the leading international trade fair for technical textiles and nonwovens opens its doors, the booked space already exceeds the total area of the last edition in 2015. Moreover, the extensive complementary programme of events is set to be distinguished by a variety of innovations in 2017. The highlight of this year’s Techtextil will be the special ‘Living in Space’ event in cooperation with the European Space Agency (ESA) and the German Aerospace Centre (Deutsches Zentrum für Luft- und Raumfahrt – DLR).

“We are branching out in completely new directions with this year’s Techtextil and are, therefore, all the more delighted about the outstanding resonance of our exhibitors”, says Olaf Schmidt, Vice President Textiles & Textile Technologies, Messe Frankfurt. “Furthermore, the fact that we have gained strong new partners, ESA and DLR, from one of the main areas of application for technical textiles represents solid evidence of the application relevance of the products and technologies shown at Techtextil.”

Exhibitors include not only international market leaders but also numerous newcomers and returnees. Significant exhibitor growth comes from European countries, particularly from Ger-
many, Italy, the Netherlands, Poland, Switzerland and Spain. However, additional growth is also expected to come from Asia.

Special ‘Living in Space’ exhibition and special area in Hall 6.1

In cooperation with the European Space Agency (ESA) and the German Aerospace Centre (DLR), Techtextil will illustrate the wide range of applications for technical textiles with reference to the aerospace industry under the title ‘Living in Space’. To this end, the concurrent Texprocess trade fair will also be integrated into the exhibition.

“The technical-textile sector offers the textile solutions needed to move around and survive in space. This is what we will show in a professional and at the same time entertaining way on a dedicated area at the trade fair. For visitors, the area will offer inspiration and orientation”, says Michael Jänecke, Director Brand Management Technical Textiles & Textile Processing, Messe Frankfurt.

A special area in the vicinity of exhibitors of functional apparel and technical textiles is being created in hall 6.1 and, based on the areas of application for technical textiles, will show high-tech textiles and textile-processing technology from and for the aerospace sector. The highlight of the interactive area is a virtual-reality experience. On a special area, Techtextil and Texprocess visitors can undertake a virtual journey through space to Mars and discover how technical textiles and their processing technology can make it possible to set up communities in space. Additionally, the ‘Material Gallery’ will show textile products and processing technologies from Techtextil exhibitors with links to space travel. There will also be presentations by start-ups that work at the interface of technical textiles and space travel.

In hall 6.1, exhibitors and visitors will also find the ‘Innovation made in Germany’ area of the Federal Ministry of Economics and Energy (Bundesministerium für Wirtschaft und Energie – BMWi), which is aimed at young, innovative companies based in Germany. Applications for a place in the BMWi area can still be made on the Techtextil website.

Change in placement for CAD/CAM and Cutting, Making, Trimming

To make the profiles of Techtextil and Texprocess even sharper, the bonding and separating technology, CMT (Cutting, Making, Trimming), CAD/CAM and printing product segments will be concentrated together at Texprocess in hall 4.0. Thus, visitors will find Techtextil exhibitors from these segments at Texprocess. These product groups will be deleted from the Techtextil nomenclature.

Complementary programme with changes to the Innovative Apparel Show

Successfully started at Techtextil and Texprocess in 2015, the Innovative Apparel Show will get in 2017 even more international with universities for fashion and design from four European countries. These universities will present their visionary product ideas using technical textiles and modern processing technologies on all four days. They are: Accademia Italiana, Florence / Italy; ESAD College of Art and Design, Matosinhos / Portugal; Esmod Paris/France, and the University of Trier / Germany. The young designers will show designs revolving around the themes of textile effects, creative engineering and smart fashion while a fashion show in the foyer of Halls 5.1 and 6.1 presents their ideas in a professional way.

Techtextil Symposium in cooperation with Dornbirn MFC 

The concept of Techtextil Symposium, one of the world’s leading events for textile research, is being expanded with the coming edition to be held in seven consecutive blocks, each of seven lectures. Thus, all lecture blocks will be expanded by one lecture. Additionally, Techtextil is working together with the Dornbirn MFC Man-made Fibres Congress for the first time. Thus, Dornbirn-MFC will organise one of the seven lecture blocks within the framework of the symposium (to be held in ‘Saal Europa’ of Hall 4.0).
Moreover, outstanding new developments and advances in the fields of technical textiles, nonwovens and functional apparel textiles will be honoured for the 14th time with the Techtextil Innovation Award, the competition for which is also open to non-exhibitors. Entries are now invited. The deadline for receipt is 20 February.

Together with the international Tensinet network, Techtextil is holding the 14th ‘Textile Structures for New Building’ competition for students and young professionals, which honours innovative and practical concepts for building with textiles or textile-reinforced materials. The closing date for receipt of entries to the competition, which is worth a total of € 8,000, is 26 February 2017. In addition to the awards ceremony, all award-winning works from the student competition and the Innovation Award will be on show in special exhibitions in hall 4.1 and hall 6.1.

Technical Textiles market continues growth
 
According to the Confederation of the German Textile and Fashion Industry (textile+mode) the textile and apparel industry with more than 130,000 employees, 1,400 companies and an annual turnover of around 32 billion euros is the second largest consumer goods industry in Germany. The growth is primarily driven by technical textiles. “German companies are the global market leaders in terms of technical textiles. For years, the turnover has been growing steadily – a proof for the innovativeness of the industry and excellent products. The digitalization of textile products and processes will furthermore trigger an innovation boost in other industries”, says Manfred Junkert, Deputy General Manager of textile+mode.

Held concurrently with Techtextil, Texprocess, Leading International Trade Fair for Processing Textile and Flexible Materials (9 to 12 May 2017), offers insights into all stages of textile processing, including finishing and digital printing. Texprocess is also characterised by an outstanding number of exhibitor registrations exceeding the results of the previous edition, too. Techtextil 2015 was attended by 28,500 trade visitors from 102 nations, as well as over 5,500 trade visitors from the parallel Texprocess.

The ‘Textile Structures for New Building’ competition for students is being held for the 14th time by Techtextil © Messe Frankfurt Exhibition GmbH
27.09.2016

TECHTEXTIL AND TENSINET INVITE ENTRIES FOR THE 14TH ‘TEXTILE STRUCTURES FOR NEW BUILDING 2017’ COMPETITION FOR STUDENTS

The ‘Textile Structures for New Building’ competition for students is being held for the 14th time by Techtextil, International Trade Fair for Technical Textiles and Nonwovens, and students of civil engineering, product design and related disciplines, as well as young professionals, are invited to enter their ideas for building with textiles or textile-reinforced materials. As in the past, the competition is sponsored by the international TensiNet network with cash prizes worth a total of € 8,000. The closing date for entries is 26 February 2017.

The ‘Textile Structures for New Building’ competition for students is being held for the 14th time by Techtextil, International Trade Fair for Technical Textiles and Nonwovens, and students of civil engineering, product design and related disciplines, as well as young professionals, are invited to enter their ideas for building with textiles or textile-reinforced materials. As in the past, the competition is sponsored by the international TensiNet network with cash prizes worth a total of € 8,000. The closing date for entries is 26 February 2017.

The scientific supervision remains in the hands of Prof Werner Sobek, Director of the Institute for Lightweight Structures and Conceptual Design (ILEK) of the University of Stuttgart. For the first time, the competition is partnered by Architonic, the leading online platform for architecture and design. The award-winning works will be on show for international exhibitors and visitors during the official presentation ceremony and in a special exhibition at Techtextil 2017 from 9 to 12 May 2017. The aim of the competition is to encourage innovative and practical examples of building with textiles or textile-reinforced materials, and to promote the interests of students and young professionals.

Information about the ‘Textile Structures for New Building 2017’ competition for students

Assignment

The competition covers all aspects of building with textiles and entrants are free to choose any subject of relevance to this. An important theme is ‘Suitability for reuse and recycling’. Both supervised and unsupervised projects will be accepted.

Jury

An independent, international jury of experts comprising renowned academics, architects (building with textiles) and engineers will judge the works submitted. The Chairman of the jury is Prof Werner Sobek.

Prizes

The winners will share prize money totalling € 8,000, sponsored by the TensiNet association. Awards will be given in the following categories: macro-architecture, micro-architecture, material innovations, the environment & ecology and composites & hybrid structures.

Further information and registration at techtextil-student.com