Textination Newsline

from to
Reset
7 results
Photo dayamay Pixabay
21.08.2023

Composites Germany: Investment climate cloudy

  • Results of the 21st Composites Market Survey
  • Critical assessment of the current business situation
  • Future expectations turn negative
  • Expectations for application industries vary
  • Growth drivers with only slight shifts
  • Composites index points in different directions

This is the 21st time that Composites Germany (www.composites-germany.de) has identified the latest performance indicators for the fibre-reinforced plastics market. The survey covered all the member companies of the umbrella organisations of Composites Germany: AVK and Composites United, as well as the associated partner VDMA.

As before, to ensure a smooth comparison with previous surveys, the questions in this half-yearly survey have been left unchanged. Once again, the data obtained in the survey is largely qualitative and relates to current and future developments in the market.

  • Results of the 21st Composites Market Survey
  • Critical assessment of the current business situation
  • Future expectations turn negative
  • Expectations for application industries vary
  • Growth drivers with only slight shifts
  • Composites index points in different directions

This is the 21st time that Composites Germany (www.composites-germany.de) has identified the latest performance indicators for the fibre-reinforced plastics market. The survey covered all the member companies of the umbrella organisations of Composites Germany: AVK and Composites United, as well as the associated partner VDMA.

As before, to ensure a smooth comparison with previous surveys, the questions in this half-yearly survey have been left unchanged. Once again, the data obtained in the survey is largely qualitative and relates to current and future developments in the market.

Critical assessment of current business situation
After consistently positive trends were evident in the assessment of the current business situation in 2021, this slipped in 2022. For the third time in a row, the current survey shows pessimistic assessments. The reasons for the negative mood are manifold. However, the main drivers are likely to be the still high energy and commodity prices. In addition, there are still problems in individual areas of the logistics chains as well as a restrained consumer climate. Despite rising registration figures, the automotive industry, the most important application area for composites, has not yet returned to its former volume. This also illustrates the change in strategy of European OEMs to move away from volume models towards high-margin vehicle segments. The construction industry, the second central area of application, is currently in crisis. Although the order books are still well filled in many cases, new orders are often not forthcoming. High in-terest rates and material costs combined with a high cost of living are placing a heavy burden on private construction in particular. A real decline in turnover of 7% is currently expected for the construction industry in 2023.

The assessment of the business situation of their own company is also increasingly pessimistic. The picture is particularly negative for Germany. Almost 50% of respondents (44%) are critical of the current business situation. The view of global business and Europe is somewhat more positive. Here, "only" 36% and 33% of the respondents respectively assess the situation rather negatively.

Future expectations turn negative
Following the rather pessimistic assessment of the current business situation, future business expectations also turn negative. After an increase in the last survey, the cor-responding indicators for the general business situation are now clearly pointing down-wards. The respondents are also more pessimistic about their own com-pany's future expectations.

The participants apparently do not expect the situation to improve in the short term. It is also noticeable here that the view of Germany as a region is more critical in relation to Europe and the global economy. 22% of the respondents expect a negative develop-ment in Germany. Only 13% expect the current situation to improve. The indicators for Europe and the world are better.

Investment climate clouds over
The currently rather cautious assessment of the economic situation and the pessimistic outlook also have an impact on the investment climate.
Whereas in the last survey 40% of the participants still expected an increase in person-nel capacity, this figure is currently only 18%. On the other hand, 12% even expect a decline in the area of personnel.

The share of respondents planning to invest in machinery is also declining. While 71% of respondents in the last survey expected to invest in machinery, this figure has now fallen to 56%.
 
Expectations of application industries differ
The composites market is characterised by strong heterogeneity, both in terms of materials and applications. In the survey, the participants were asked to give their assessment of the market development in different core areas. The expectations are extremely varied.

The weaknesses already described in the most important core markets of transport and construction/infrastructure are clearly evident. Growth is expected above all in the wind energy and aviation sectors. Expectations about future market developments, on the other hand, are significantly more positive than the figures presented here might suggest.

Growth drivers with only slight shifts
The paradigm shift in materials continues. While in the first 13 surveys the respondents always named CFRP as the material from which the main growth impulses for the com-posites sector are to be expected, the main impulses are now assumed to come from GRP or across all materials. There is a slight regional shift. At present it is mainly North America that is expected to provide the main growth impulses for the industry. Europe and Asia are losing ground slightly.

Composites index points in different directions
The numerous negative influences of recent times are now also reflected in the overall composites index. All indicators are weakening. Both the current and the future assessment are turning negative.  

The total volume of composites processed in Europe in 2022 was already slightly down compared to 2021. After a good first quarter of 2022, there is currently a clear cooling of activity. It remains to be seen whether it will be possible to counteract the negative development. Targeted intervention, including by political decision-makers, would be desirable here. However, this cannot succeed without industry/business. Only together will it be possible to further strengthen Germany's position as a business location and to maintain or expand its position against the backdrop of a weakening global economy. There are still very good opportunities for composites to expand their market position in new and existing markets. However, the dependence on macroeconomic developments remains. The task now is to open up new market fields through innovations, to consistently exploit opportunities and to work together to further implement composites in existing markets. This can often be done better together than alone. With its excellent network, Composites Germany offers a wide range of opportunities.

Source:

Composites Germany
c/o AVK-TV GmbH

08.03.2023

Composites Germany presents results of 20th market survey

  • General economic developments are dampening mood in composites industry
  • Future expectations are optimistic
  • Investment climate has remained stable
  • Varying expectations for application industries
  • Growth drivers have remained unchanged
  • Composites Index is pointing in different directions

This is the 20th time that Composites Germany has identified the latest performance indicators for the fibre-reinforced plastics market. The survey covered all the member companies of the umbrella organisations of Composites Germany: AVK and Composites United, as well as the associated partner VDMA.  

  • General economic developments are dampening mood in composites industry
  • Future expectations are optimistic
  • Investment climate has remained stable
  • Varying expectations for application industries
  • Growth drivers have remained unchanged
  • Composites Index is pointing in different directions

This is the 20th time that Composites Germany has identified the latest performance indicators for the fibre-reinforced plastics market. The survey covered all the member companies of the umbrella organisations of Composites Germany: AVK and Composites United, as well as the associated partner VDMA.  

General economic developments are dampening mood in composite industry
Like all industries, the composite industry has been affected by strong negative forces in recent years. The main challenges over the last few years have been the Covid pandemic, a shortage of semiconductors, supply chain problems and a sharp rise in the price of raw materials. Furthermore, there have been numerous isolated effects that added to the pressure on the industry.

The main challenges during the past year were primarily a steep increase in energy and fuel prices and the cost of logistics. In addition, the war in Ukraine put a further strain on supply chains that had already been weakened.

Overall, the stock market prices for both electricity and petroleum products are currently showing a clear downward trend. However, the significantly lower prices have not yet percolated from manufacturers and buyers to the end customer.

The aforementioned effects have further dampened the mood in the composites industry. The index assessing the current general business situation in Germany and Europe has dropped even further than before. However, the assessment of the global situation is somewhat more positive.

Despite this generally negative assessment of the current situation, companies are moving in a somewhat more positive direction in the assessment of their own business situations. The companies that were surveyed rated their own positions more positively than in the last survey.

Future expectations are optimistic
The expectations on future market developments are showing a very positive picture. After a significant drop in the last survey, the indicators for the general business situation are now displaying a clear upward trend again. Moreover, respondents were far more optimistic about their own companies’ future prospects.

Investment climate remaining stable
The investment climate has remained at a stable level. Nearly half of the companies surveyed are planning to employ new staff over the next six months. As before, about 70% of respondents are either considering or planning machine investments. Unlike in the previous survey, this value has remained almost unchanged.

Varying expectations for application industries
The composites market is highly heterogeneous in terms of both materials and applications. In the survey, respondents were asked to assess the market developments of different core areas. Expectations turned out to be extremely diverse.

The most important application segment for composites is the transport sector. The number of new registrations of passenger cars has been declining in recent years. This is where we can see OEMs moving away from volume models and opting for more profitable mid-range and premium segments. In this year’s survey, this shows itself in relatively cautious expectations for this segment.

The currently rather pessimistic outlook for the construction industry is leading companies to expect major slumps in this sector, in particular. The building sector, in particular, often reacts rather slowly to short-term economic fluctuations and has long been relatively robust towards the aforementioned crises. Now, however, it seems that this area, too, is being affected by negative influences.

The pessimistic outlook on the sports and leisure sector can be explained by a rather pessimistic view of consumer behaviour.

Expectations about future market developments, on the other hand, are significantly more positive than the figures presented here might suggest.

Growth drivers still stable
As before, the current survey shows Germany, Europe and Asia as the global regions expected to deliver the most important growth stimuli for the composites segment, with Europe playing a key role for many of the respondents.

Where materials are concerned, we are seeing a continuation of the ongoing paradigm shift. Whereas, in the first 13 surveys, respondents always believed that the composites segment would receive its prevailing growth stimuli from CRP, there is now an almost universal expectation that the most important stimuli will be coming from GRP or from all the materials.

Composites Index points in different directions
Despite the many negative influences that have occurred recently, composites appear to be in good shape for the future. Thanks to excellent market developments in 2021, they have almost reached their pre-pandemic level. The outlook for market developments in 2022 have not been finalised but are showing a less positive trend for last year.

Nevertheless, there are many indications to suggest that the generally positive development of the composite industry over the last few years is set to continue. In the medium term, structural changes in the transport sector will open up opportunities for composites to gain a new foothold in new applications. Major opportunities can be seen in areas of construction and infrastructure. Despite the rather weak market situation, these areas offer enormous opportunities for composites, due to their unique properties which predestine them for long-term use. The main assets of these materials are their durability, their almost maintenance-free use, their potential for use in lightweight construction and their positive impact on sustainability. Furthermore, one major growth driver is likely to be the wind industry, provided that it meets the politically self-imposed targets for the share of renewable energies in power consumption.

Overall, the Composites Index shows a restrained assessment of the current situation, whereas the assessment of the future situation is clearly positive. Respondents are apparently optimistic about the future, reflecting the assessment mentioned above: Composites have been used in industry and in serial production for several decades and, despite numerous challenges, they are set to provide immense potential for exploring new areas of application.

The next Composites Market Survey will be published in July 2023.

Source:

Composites Germany

photo: pexels
26.07.2022

Composites Germany – Results of the 19th Market Survey

  • Current crises are dampening mood in composites industry
  • Pessimistic outlook
  • Subdued investment climate
  • Varying expectations for application industries
  • GRP is still a growth driver
  • Composites Index continues to decline

This is the 19th time that Composites Germany has identified the latest performance indicators for the fibre-reinforced plastics market. The survey covered all the member companies of the three major umbrella organisations of Composites Germany: AVK, Leichtbau Baden-Württemberg and the VDMA Working Group on Hybrid Lightweight Construction Technologies.

As before, to ensure a smooth comparison with the previous surveys, the questions in this half-yearly survey have been left unchanged. Once again, the data obtained in the survey is largely qualitative and relates to current and future developments in the market.

  • Current crises are dampening mood in composites industry
  • Pessimistic outlook
  • Subdued investment climate
  • Varying expectations for application industries
  • GRP is still a growth driver
  • Composites Index continues to decline

This is the 19th time that Composites Germany has identified the latest performance indicators for the fibre-reinforced plastics market. The survey covered all the member companies of the three major umbrella organisations of Composites Germany: AVK, Leichtbau Baden-Württemberg and the VDMA Working Group on Hybrid Lightweight Construction Technologies.

As before, to ensure a smooth comparison with the previous surveys, the questions in this half-yearly survey have been left unchanged. Once again, the data obtained in the survey is largely qualitative and relates to current and future developments in the market.

Current crises are dampening mood in composites industry
Both the economy in general and industry in particular are struggling with numerous challenges at the moment. The Covid-19 pandemic has now had a negative impact for over two years and is still affecting a range of segments of the composites industry. One area that has been hit especially hard by the resulting losses is the mobility sector. Another major strain has been a sharp rise in energy costs recently. Above all, we can expect price increases in fuel and gas to become a central issue over the next few months. In addition, there are still problems along international supply chains, coupled with steep increases in raw material prices, partly due to bottlenecks in the supply. The war in Ukraine has put an additional strain on many business sectors, affecting their supply chains, in particular.

In the current survey, both these and other effects have had a major negative impact on the mood in the composites industry.

The assessment index for the current general economic situation is showing a clear decline.

Compared to the last survey, the assessment of the respondents’ own business situations has dropped significantly and for the first time in eighteen months. However, this decline has been far less severe than during the onset of the Covid-19 pandemic.

Pessimistic outlook
Furthermore, there has been a substantial decline in expectations for the future market development. The key figures for the general economic situation have been declining sharply and have reached an all-time low since the beginning of the survey. The respondents are also less optimistic about future expectations for their own companies.

However, respondents are less extreme when assessing the business situations of their own companies. Despite negative spikes, this curve is far less steep, showing that respondents are expecting less dramatic effects on their own companies than on the industry as a whole.

Subdued investment situation
Although, as expected, the investment climate has also become subdued, it should be noted that, in all, expectations are still relatively high. 70% of all respondents believe that machine investments are possible, or they are planning for it. This figure is somewhat lower than in the previous market survey, but it shows a far less dramatic development than the other factors mentioned above .

Varied expectations for application industries
We already mentioned the high level of heterogeneity of applications in the composite sector. In the survey, respondents were asked to provide assessments of market developments in various core sectors.

Their expectations clearly differ substantially from one another.

The proportion of pessimistic expectations has generally been rising for all application industries. While these expectations are almost entirely within a single-digit range, there has been a clear rise in the proportion of those expecting a deterioration of the market in the various application industries. Similar to the last surveys, major drops are expected above all for the automotive, aviation and mechanical engineering sectors. For the first time, however, we can now also see rather negative expectations on the infrastructure and building sector. Yet this is a segment which often reacts quite slowly to temporary economic fluctuations and has so far shown itself to be relatively resilient towards the above-mentioned crises. It remains to be seen whether such forebodings will come true, or whether the construction industry will continue to hold its own in the face of the current negative forces.

Growth drivers remain stable
Geographically, the survey shows that the most important growth stimuli for the composites segment are expected to come from Germany, Europe and Asia.

Where materials are concerned, we are seeing a continuation of the ongoing paradigm shift. Whereas, in the first 13 surveys, respondents always mentioned CRP as the material with the most important growth drivers in its environment, the most important stimuli are now being expected to come consistently either from GRP or from all materials.

Composites Index continues to decline
The industry is currently going through an extremely tense and difficult period, characterised by rising costs, supply chain issues, lack of availability of certain semifinished products and raw materials, increasing political instability and very pessimistic expectations for the future. All the relevant indicators of the current composites survey are pointing downwards at the moment. After some slight recovery over the last 18 months, the Composite Index has therefore clearly been weakening this time and has been dropping to new low points, especially concerning future expectations.

Industry in general, but particularly also Germany’s composite industry, has always shown itself to be very resilient towards crises and has often cushioned negative developments quickly. The total production volume for composites in Europe last year already reached its pre-crisis level of 2019. Germany continues to be the most important manufacturing country in Europe, with a market share of nearly 20%. Hopefully, the slowdown in the coming months will be less severe than expected and the composites industry will remain on an upward trajectory. We will continue to be optimistic, as composites are highly diverse and therefore a key material of the future.

The next Composites Market Survey will be published in January 2023.

Source:

Composites Germany

Photo: Pixabay
03.08.2021

Composites Germany presents results of the 17th Composites Market Survey

  • Highly positive rating of current business situation
  • Future expectations are optimistic
  • Varied expectations for application industries
  • Still the same growth drivers

This is the seventeenth time that Composites Germany has identified the latest KPIs for the fibre-reinforced plastics market. The survey covered all the member companies of the three major umbrella organisations of Composites Germany: AVK (Industrievereinigung Verstärkte Kunststoffe e.V.), Leichtbau Baden-Württemberg and the VDMA Working Group on Hybrid Lightweight Construction Technologies.

As before, to ensure a smooth comparison with the previous surveys, the questions in this half-yearly survey have been left unchanged. Once again, the data obtained in the survey is largely qualitative and relates to current and future market developments.

  • Highly positive rating of current business situation
  • Future expectations are optimistic
  • Varied expectations for application industries
  • Still the same growth drivers

This is the seventeenth time that Composites Germany has identified the latest KPIs for the fibre-reinforced plastics market. The survey covered all the member companies of the three major umbrella organisations of Composites Germany: AVK (Industrievereinigung Verstärkte Kunststoffe e.V.), Leichtbau Baden-Württemberg and the VDMA Working Group on Hybrid Lightweight Construction Technologies.

As before, to ensure a smooth comparison with the previous surveys, the questions in this half-yearly survey have been left unchanged. Once again, the data obtained in the survey is largely qualitative and relates to current and future market developments.

Highly positive rating of current business situation
After ratings of the current business situation had been steadily declining for nearly two years in succession, last year’s survey already displayed a trend reversal towards a more positive outlook. This positive trend has now continued in the latest survey, with entirely positive ratings for all three regions (Germany, Europe and worldwide). For ex-ample, 80% described the current general business situation as either positive or indeed very positive.

Moreover, unlike in the last survey, this more optimistic assessment applies not only to the general business situation, but also to the respondents’ own businesses, as they gave even more positive ratings than last year.     

There are currently quite a few challenges in the industrial environment. In many cases, the Covid-19 pandemic, for example, has merely receded, but has not disappeared.      
Business models have been and are still requiring adjustments. In some cases, supply chains have been severely disrupted and there are still some serious bottlenecks. The blockage of the Suez Canal by the Ever Given has once again highlighted the vulnerability of international commerce.

Shortages of raw materials, sharp increases in the prices of many raw materials and, most recently, a shortage of chips are having a major impact on various application industries. Nevertheless, the overall picture in the composites in-dustry is extremely optimistic. Similarly positive ratings were last achieved in the autumn 2018 and spring 2019 surveys.

Future expectations are optimistic
The positive prevailing mood is further reinforced by positive expectations for the future. A consistently optimistic picture emerged when respondents were asked about their ex-pectations for future business developments. For example, more than 80% of respond-ents are expecting the business situation in Europe to improve over the next six months. The pattern is similar for the other regions.

Varied expectations for application industries
Expectations on selected application industries vary substantially. As in the previous survey, significant declines are expected, above all, in automotive, aviation and wind energy. However, we can see that the proportion of respondents giving more pessimistic assessments has once again declined significantly.
Whereas, in the last sur-vey, 46% were expecting to see the situation get worse in aviation, this value has now dropped to a “mere” 17%. In the automotive sector, it has dropped from 17% (second half of 2020) to only 14%.

Two areas of application, in particular – infrastructure/construction and sports/leisure – have long been seen by many respondents as major growth stimulants for the composites industry. Even in times of a more difficult industrial environment, these two areas are currently proving to be especially robust.

GRP is still a growth driver
As before, the current market survey shows Germany, Europe and Asia as the global regions expected to deliver the most important growth stimuli for the composites segment. Expectations for Asia, on the other hand, have declined somewhat in favour of Europe. Where materials are concerned, we are seeing a continuation of the ongoing paradigm shift.      

Respondents are still convinced that CRP (carbon fibre reinforced plastic) is losing ground as a growth driver. However, GRP (glass fibre reinforced plastic) is now ranking as the most important material for the third time in succession. A large number of respondents have also mentioned the area entitled “Across All Segments” this time.

Composites are still relatively young materials with a great deal of potential. It remains exciting to see to what extent composites will continue to emerge as alternative materials and whether they can benefit from the major forthcoming developments (e.g. alternative drives, a growing demand for sustainability, alternative power sources, 5G, etc.).
The next Composites Market Survey will be published in January 2022. 

DIGITALE PROZESSKETTE SICHERT ZUKUNFT DES LEICHTBAUS © Reed Exhibitions Deutschland GmbH
10.09.2019

DIGITAL PROCESS CHAIN SECURES THE FUTURE OF LIGHTWEIGHT CONSTRUCTION

  • At COMPOSITES EUROPE from 10 to 12 September
     
  • Incubator of ideas for multi-material lightweight construction
     
  • „Ultralight in Space“: Market study examines lightweight construction trends in aerospace

Whenever there’s movement, mass and weight quickly become destroyers of energy. From 10 to 12 September, the Lightweight Technologies Forum (LTF) at COMPOSITES EUROPE in Stuttgart will show how lightweight construction contributes to more efficient and better cars, airplanes and machines. The focus at the Forum will be on the commercially viable implementation of cross-material and holistic lightweight construction systems. The way to get there is through the digitalisation of the process chain.

  • At COMPOSITES EUROPE from 10 to 12 September
     
  • Incubator of ideas for multi-material lightweight construction
     
  • „Ultralight in Space“: Market study examines lightweight construction trends in aerospace

Whenever there’s movement, mass and weight quickly become destroyers of energy. From 10 to 12 September, the Lightweight Technologies Forum (LTF) at COMPOSITES EUROPE in Stuttgart will show how lightweight construction contributes to more efficient and better cars, airplanes and machines. The focus at the Forum will be on the commercially viable implementation of cross-material and holistic lightweight construction systems. The way to get there is through the digitalisation of the process chain.

From the idea to the component – that’s the path the Lightweight Technologies Forum aims to illuminate and support. To that end, the forum will gather current lightweight construction projects in Stuttgart, including from automotive engineering, aerospace and mechanical engineering – precisely those industries whose stringent material, safety and reliability demands make them idea generators for many other industries.
The commonality that runs through all the projects: a consistently digital process chain contributes significantly to the implementation of innovations. Another focus area is connecting and joining technology in multi-material lightweight construction.

"The Lightweight Technologies Forum is conceived as a cross-industry and cross-material incubator of ideas, a place where all stakeholders can consider new concepts. For that, we’re bringing successful flagship projects to Stuttgart”, says Olaf Freier, who on behalf of organiser Reed Exhibitions is responsible for the programme of the forum.

The growing significance of digitalisation and bionics
Support in putting together the forum programme comes from Automotive Management Consulting (AMC). The consulting company specialises in lightweight construction strategies, processes and structures in the automotive industry. “Lightweight construction requires comprehensive, systematic thinking”, says Rainer Kurek, the managing director of AMC. “The most important key factor, though, is the digitalisation of the process chain. Only virtual and simulation-driven design work can bring about competitive lightweight construction products, because they’re launched faster and ensure process safety while costing far less in development”, Kurek adds.

„Ultralight in Space“: Market study on lightweight construction trends in the aerospace industry
When it comes to ultra-lightweight construction, space travel has played a pioneering role since its inception, having driven many disciplines to new record performances. In cooperation with the Luxembourg-based aerospace suppliers GRADEL, AMC are currently conducting a market study to examine the latest technological trends. The results will be revealed at the LTF in Stuttgart on 10 September.
"Even though aerospace is a niche business: technical solutions that meet the stringent material demands here lead the way into the future, which in turn impacts other industries. That’s why it’s important to know the customer’s needs as well as the lightweight strategies, processes, structures and material decision-making of this market”, Rainer Kurek says assuredly.

Also underlining how important space travel is for the development of new technologies is Claude Maack, managing director of GRADEL: “All components are exposed to extreme conditions. Right from the launch of the rocket, they have to withstand enormous acceleration forces. In space, material must resist radiation exposure – and for many years. Then there are the high temperature differences from minus 185 to plus 200 degrees Celsius – alternating every couple of hours from one extreme to the other.“

The material question: Composites with biggest growth potential
Metals currently hold the largest market share among lightweight materials – but fibre-reinforced composites are said to have the biggest growth potential. More and more often they get to apply their strengths in lightweight construction. In the exhibition area, the LTF demonstrates how glass-fibre reinforced (GFRP) and carbon-fibre reinforced plastics (CFRP) play to their strengths in hybrid structural components.
On display, among other things, will be an ultra-lightweight seat by Automotive Management Consulting (AMC), Alba tooling & engineering and csi entwicklungstechnik GmbH, which was presented as a feasibility study – based on the lightweight construction innovation xFK in 3D – and virtual prototype at the 2018 LTF.

The innovative ultra-lightweight seat, which only weighs 10 kg, is based on a special winding process for fibre-composite components. The  “xFK in 3D process” uses a resin-impregnated continuous fibre from which components are wound and produced without waste to match the load. Conceivable uses for the concept seat include the so-called hypercars, sports cars and the air taxis of the future. Just a few weeks ago, the prototype was presented to the public and swiftly recognised with the German Innovation Award.

Exhibitors will be presenting additional lightweight construction solutions in the adjacent Lightweight Area. Some examples include structural components, semi-finished goods, technical textiles, adhesives and resins for automotive engineering and aerospace.

Altogether, visitors of the Lightweight Technologies Forum and COMPOSITES EUROPE will meet 300 exhibitors from 30 countries who will come to Stuttgart to showcase the entire process chain of fibre-reinforced plastics – from materials to machines for processing to concrete application examples from automotive engineering, aerospace, mechanical engineering, construction, wind power, and the sports and leisure sector. Besides new products, a special focus of the trade fair will be on advances in process technologies for large-scale series production.  
 

Composites Europe 2019 (c) Photos: Reed Exhibitions/ Oliver Wachenfeld
30.07.2019

COMPOSITES EUROPE 2019: Digital Process Chain makes Fibre Composites Competitive

  • Strong Triple: COMPOSITES EUROPE, International Composites Conference and Lightweight Technologies Forum
  • “Process live” special areas showcase technological progress
  • Co-located event: Foam Expo Europe

The composites industry provides important impetus – for lightweight construction and material innovations in automotive, aviation, mechanical engineering, construction, wind power as well as in the sports and leisure sectors. So in international competition it is solutions with a high degree of automation that are in demand. COMPOSITES EUROPE from 10 to 12 September will present the trends and advances in the production and processing of fibre-reinforced plastics in Stuttgart. The trade fair will be accompanied by the International Composites Conference and the Lightweight Technologies Forum. Also held in parallel at the Messe Stuttgart premises will be Foam Expo Europe.

  • Strong Triple: COMPOSITES EUROPE, International Composites Conference and Lightweight Technologies Forum
  • “Process live” special areas showcase technological progress
  • Co-located event: Foam Expo Europe

The composites industry provides important impetus – for lightweight construction and material innovations in automotive, aviation, mechanical engineering, construction, wind power as well as in the sports and leisure sectors. So in international competition it is solutions with a high degree of automation that are in demand. COMPOSITES EUROPE from 10 to 12 September will present the trends and advances in the production and processing of fibre-reinforced plastics in Stuttgart. The trade fair will be accompanied by the International Composites Conference and the Lightweight Technologies Forum. Also held in parallel at the Messe Stuttgart premises will be Foam Expo Europe.

Trade fair visitors will meet with over 300 exhibitors from 30 nations who will be displaying materials, technical solutions and innovative application examples in Stuttgart. Apart from novel products the trade fair will place special emphasis on innovative process engineering. Visitors will learn about the state of play in serial production and new applications in the composites industry in the exhibition area as well as on numerous special areas, on themed guided tours, at the accompanying International Composites Conference and at the Lightweight Technologies Forum, which is dedicated to the trends in multi-material lightweight construction.

“Process live”: Technologies in Synergy
Perfectly coordinated processing and manufacturing processes will be centre stage at the “Process live” event. On shared exhibition space machinery and equipment manufacturers will exhibit their technologies in concert and – what’s more – in operation so as to show the different individual processes in a real context.  

On display, to name but one exhibit, is VAP®, the Vacuum Assisted Process patented by Airbus, which will be in the limelight in the Trans-Textil and Composyst special area. This process permits the one-step production of large-surface and geometrically complex components without an autoclave, which is why it is particularly suitable for structural components in aviation, wind power, shipbuilding, in rail and road transport, in machinery and device manufacturing as well as in architecture and in the leisure industry.

The “Process live” special area care of cutting specialists GUNNAR from Switzerland specifically targets the DACH region (Germany, Austria, Switzerland) with its small and medium-sized companies. Jointly with laser projection expert LAP and composites engineering expert SCHEURER Swiss, GUNNAR introduces a connected overall process that fuses modern machinery and software with specialists’ manual jobs. The point of departure here is an automated manufacturing process for sorted layer placement in small and medium quantities involving a certain degree of skilled labour.

Fibre composite specialist Hacotech will present CNC-controlled cutting processes and various finishing possibilities in cooperation with Aristo Graphic Systeme and Lavesan. Alongside cutting, production preparation and customised sizing, the production of dimensionally correct templates and the cutting and custom-sizing of composite materials and prepregs will be on show.

Cutting technology is also centre stage in the special area of Rebstock Consulting, Broetje-Automation and Zünd Systemtechnik, which will be taking part in “Process live” with “Automated Sorting and Kitting”.

Composite producer Saertex and chemical company Scott Bader will demonstrate the RTM process for producing and curing a laminate that complies with the highest fire protection requirements in as little as 1 hour.   

5th International Composites Conference (ICC)
Serial production, stable processes, new markets – the International Composites Conference (ICC) is set to inject a fresh breeze for innovations into the market and to this end brings together processors and users of fibre-reinforced plastics from all over Europe. For the first time, this renowned Conference will be held in parallel with COMPOSITES EUROPE. The lecture programme put together by the trade association Composites Germany and the trade fair will also move closer in terms of content.  

One of tomorrow’s cross-cutting themes keeping the entire industry on its toes are multi-material solutions in nearly all industrial applications. In the construction sector the Conference also deals with the rising use of carbon concrete. Process engineering will focus on processing thermoplastic materials for serial production and stable processes for thermoset plastic processing.  

The partner country of the Conference is the United Kingdom. Especially against the backdrop of the current Brexit debate the ICC aims to foster exchange among all European countries. After all, the UK is among the biggest producers of composites components in Europe.

Themed Tours on Digitalisation, Fibre Glass, Thermoplastics, Automotive and Wind Power
Guided tours and hands-on demonstrations in the exhibition halls complement the conference programme. Themed guided tours revolving around composites application, materials and markets guide trade fair visitors and congress delegates right to the stands of selected exhibitors, who will share with visitors their innovations in the fields of digitalisation of composites production, automotive manufacturing, building and construction, fibreglass, new mobility, thermoplastic materials and wind power.  

New ideas on special areas and joint stands
“Material and Production Technology” is the name of the new special area set up under the guidance of the Institute of Plastics Processing (IKV) of the RWTH Aachen University. In cooperation with other institutes such as the Aachen Center for Integrative Lightweight Production (AZL) the IKV will place manufacturing technology centre stage at the trade fair. In particular, the special area will trace the path from scientific development to practical, industrial implementation.

Tomorrow’s automotive experts will also be given a separate forum: under the heading “Formula Student” students and trainees will present to visitors racing cars and bikes they have engineered.

Lightweight Technologies Forum: platform for multi-material lightweight construction
Lightweight construction remains a driver across the board for many developments in the composites sector. The Lightweight Technologies Forum (LTF) held as part of COMPOSITES EUROPE makes it clear how lightweight construction can be achieved in an economical and resource-efficient manner. This Forum views itself as a cross-industry and multi-material think tank where all parties involved can reflect on these new concepts.

To this end, the Forum in Stuttgart pools lightweight construction projects from automotive manufacturing, aviation and aerospace and mechanical engineering, to name but a few industries that serve as a driving force for many sectors with high demands made on materials, security and reliability.  

This year’s keynote speakers include Airbus Innovation Manager Peter Pirklbauer, lightweight construction expert Prof. Jörg Wellnitz (TU Ingolstadt), Dutch racing driver Jeroen Bleekemolen and lightweight construction, aviation and aerospace specialist Claus Georg Bayreuther (AMC). In their talks they will provide an overview of reference projects and novel manufacturing and joining technologies.  

Combining its own exhibition space with a lecture forum, the LTF demonstrates how glass-fibre reinforced plastics (GRP) and carbon fibre reinforced plastics (CFRP) leverage their strengths mixed with other materials in hybrid structural components. Exhibitors at the Forum and in the neighbouring Lightweight Area include “Leichtbau-Zentrum Sachsen” (Lightweight Construction Center Saxony), Chem-Trend, Gößl + Pfaff, Krempel, Mitsui Chemicals Europe, Leichtbau BW, the VDMA, Gustav Gerster, Potters Ballotini (UK), Yuho (Japan), Riba Composites (Italy) and Stamixco (Switzerland) as well as the journals Lightweight Design (Springer Fachmedien) and Automobil Industrie (Vogel Communications Group), to name but a few.

“Ultralight in Space”: market study on lightweight construction trends in the aerospace industry
The aerospace industry has always served as a pioneer for ultra-lightweight construction pushing many disciplines to their limits as a driver of innovation. The latest technical trends are currently under scrutiny via a market study carried out by consultancy Automotive Management Consulting (AMC) in cooperation with the Luxembourg-based aerospace OEM GRADEL. The results will be presented for the first time at the LTF in Stuttgart on 10 September.  

Presentation of the AVK Innovation Prize
Innovative products and applications in fibre-reinforced plastics, manufacturing processes and the latest insights from research and science, will again be recognised by the German trade association AVK – Industrievereinigung Verstärkte Kunststoffe e. V. with its renowned Innovation Prize. The winners will be announced as part of the trade fair on 10 September and the award-winning products and projects will be on display in a special area.

Presentation of the SMB-BMC Design Award
The European Alliance for SMC BMC will announce the winners of the SMC BMC Design Award 2019 – also on 10 September. The contest already held for the second time now, honours and promotes the design excellence of students or young design professionals who use SMC and BMC components (sheet and bulk moulding compounds) in their designs. This year saw sustainable mobility take centre stage as a theme.

COMPOSITES Night
The event to celebrate the midway point of the trade fair: the COMPOSITES Night at the end of the second trade fair day offers visitors and exhibitors additional opportunities for networking. Participants are in for buffets and live music at the Stage Palladium Theater in Stuttgart.

Matchmaking programme makes trade fair visit more efficient
Thanks to the complimentary networking & meeting platform “matchmaking” visitors and exhibitors can already reach out to contacts in the run-up to COMPOSITES EUROPE. Who is at the trade fair? Who has answers to your specific questions? Who can you team up with to turn new ideas into practice? The matchmaking platform allows you to “filter” and make direct appointments with potential cooperation partners by product category, industry, country, or company.

Career & Composites
With its career&composites stand COMPOSITES EUROPE targets students and graduates who can come here to establish contact with potential employers. On the special area the exhibitors present their companies to interested junior employees and attract attention to vacancies and career opportunities via a Job Wall.

Co-located with Foam Expo Europe
COMPOSITES EUROPE will be co-located with Foam Expo Europe for the first time. This trade fair covers the supply chain of technical foam production and presents moulded, rigid and soft foam solutions – from raw materials to equipment and machinery. The parallel exhibition dates generate special synergies for gaining an overview of lightweight construction materials for such shared applications as the automotive, aviation, construction and sports & leisure industries.

Composites Europe © COMPOSITES EUROPE
05.09.2017

COMPOSITES EUROPE 2017: Lightweight automotive construction propels use of fibre-reinforced plastics

  • Market study “Lightweight Construction as Innovation Factor”: Presentation at COMPOSITES EUROPE
  • 21 September: Focus Day Automotive

No other industry has drawn more public attention to glass- and carbon-fibre reinforced plastics (GFRP/CFRP) than the automotive indus-
try. Next to the aerospace industry, it’s one of the innovation and growth drivers for composites. The great significance of composites for the automotive industry must be credited to the continuing lightweight construction trend. From 19 to 21 September, COMPOSITES EUROPE in Stuttgart will show how the composites industry can support automakers and their suppliers in this area. Programme highlights include the Focus Day Automotive and the Lightweight Technologies Forum.

  • Market study “Lightweight Construction as Innovation Factor”: Presentation at COMPOSITES EUROPE
  • 21 September: Focus Day Automotive

No other industry has drawn more public attention to glass- and carbon-fibre reinforced plastics (GFRP/CFRP) than the automotive indus-
try. Next to the aerospace industry, it’s one of the innovation and growth drivers for composites. The great significance of composites for the automotive industry must be credited to the continuing lightweight construction trend. From 19 to 21 September, COMPOSITES EUROPE in Stuttgart will show how the composites industry can support automakers and their suppliers in this area. Programme highlights include the Focus Day Automotive and the Lightweight Technologies Forum.

Presentation of the study “Lightweight Construction as Innovation Factor”
When it comes to composites in the automotive sector, modern lightweight construction is the No. 1 topic, according to industry expert Rainer Kurek, CEO of AUTOMOTIVE MANAGEMENT CONSULTING GmbH (AMC) from Penzberg near Munich. After all, he says, it comprises all the aspects of lightweight automotive construction – from concept, functions and joining technologies to materials. The training and consulting company specialises in auto-industry strategies, processes and structures; together with COMPOSITES EUROPE organiser Reed Exhibitions, they will, on 21 September, present the study “Lightweight Construction as Innovation Factor” (“Leichtbau als Innovationsfaktor” in the original German), which takes a holistic and detailed look at the issue. “Created in cooperation with Reed Exhibitions, the market study ‘Lightweight Construction as Innovation Factor’ synthesises the German automotive industry’s knowledge from nearly 150 years of experience”, explains Kurek. “Against the backdrop of increasing environmental and climate-protection requirements, a fragile energy supply and the resulting more stringent resource-conservation targets, it serves to sustainably enhance and strengthen Germany’s role as a centre of innovation.” The developer says he used to think in terms of materials first, but “design engineers today approach lightweight construction with an integrative mindset – with other joining and production technologies as well as with new materials. These days, the typical tasks we get from OEMs are almost always based on integrative lightweight construction.”
 
Positive Outlook
With about a third of the GFRP materials produced in Europe being used in the transport sector, innovations and the current development status of composites for the automotive market will be emphasised in the exhibition halls of COMPOSITES EUROPE 2017, as well. The future looks bright, according to Composites Germany’s latest market survey. No fewer than 46 per cent of responding companies expect this segment to grow. Only 15 per cent anticipate a downturn. The automotive industry isn’t just one of the biggest buyers of thermoplastic composites, it’s also a major purchaser of thermoset materials like SMC. Exhibitors such as Saint Gobain Performance Plastics, capricorn COMPOSITE, Lange+Ritter, SGL TECHNOLOGIES GmbH, ARKEMA France, Cevotec and EMS will be onsite to address the automotive industry’s composites requirements.

Theme day for “motorists”: Focus Day Automotive
What’s more, the entire third day of the trade fair – dubbed the Focus Day Automotive – will be dedicated to visitors predominantly interested in composites for the vehicle industry. A free one-hour guided tour at 11 am on 21 September, for example, will give visitors a comprehensive overview. Stops include the stands of industry-leading companies such as Evonik Industries, Huntsman, the Institute of Aircraft Design at the University of Stuttgart, PHP Fibers, Toho Tenax Europe and Vosschemie. Since the number of participants is limited, it would be advisable to register in a timely manner by visiting: www.composites-europe.com/guided-tours.

The subsequent Automotive Business Lunch taking place at the stand of sponsor Hexion (Hall C2, BO6) at 12 pm will provide an excellent networking opportunity. In addition, expert lectures at the COMPOSITES Forum in Hall 6, Stand B76, will cover automotive basics, trends and innovations. Admission is free of charge for trade fair visitors.
 
Hybrid lightweight construction: The best from different material worlds
Hybrid lightweight construction, which combines metallic materials with composites, is another trend in automotive engineering, as Kurek confirms. In his estimation, it’s imperative to intelligently leverage the strengths of each respective material. “We need to think very carefully about how the different materials can be used in line with the required strength.” Composites, for instance, are great at absorbing tensile forces, while metallic materials are better suited for compressive forces.” This is exactly the issue Kurek sees as COMPOSITES EUROPE’s most critical task: “Even with composites, we long ago moved from ‘either-or’ to ‘both’. Metallic materials have a right to exist just as composites do.”
That’s why the Lightweight Technologies Forum at COMPOSITES EUROPE will provide answers to questions revolving around lightweight construction with other materials like aluminium or steel. The combined exhibition and presentation forum featuring exhibitors such as Kunststoffwerk AG Buchs, Linn High Therm, Schütze, OCSiAL Group, Hexcel Composites and ar engineers will serve as the cross-material interface between metal and composite technologies in structural components.

Trade fair opening event: 3rd International Composites Congress (ICC)
Kicking off COMPOSITES EUROPE 2017 on 18 and 19 September 2017 will be the “3rd International Composites Congress (ICC)” hosted by the trade association Composites Germany in Stuttgart. Current trends, new applications and technologies, and a comprehensive overview of market developments in Europe and worldwide will be the centre of attention at the 3rd ICC. This year’s partner country, South Korea, will be represented with several exclusive speakers.