From the Sector

from to
Reset
16 results
Generating its own energy with solar panels Photo Karl Mayer Group
Generating its own energy with solar panels
23.02.2024

Karl Mayer Group: Generating its own energy with solar panels

The Karl Mayer Group is reducing its ecological footprint when it comes to energy utilisation: The Group's largest photovoltaic system to date has just been installed at its headquarters in Obertshausen.

Following the construction of a stable substructure, the first photovoltaic elements were installed on the roof of the assembly hall in Obertshausen on 16 February 2024. This will be followed by the step-by-step conversion of other roofs. If everything goes according to plan, around 6,000 modules will have been installed on an area of approx. 12,000 m² and over 60,000 metres of cable laid by the middle of the year.

"With a total output of 2.4 MWp, we will be able to generate over 35% of the total electricity consumption at the site ourselves," explains Michael Sustelo, Head of Facility Management at the Karl Mayer Group.

The Karl Mayer Group is reducing its ecological footprint when it comes to energy utilisation: The Group's largest photovoltaic system to date has just been installed at its headquarters in Obertshausen.

Following the construction of a stable substructure, the first photovoltaic elements were installed on the roof of the assembly hall in Obertshausen on 16 February 2024. This will be followed by the step-by-step conversion of other roofs. If everything goes according to plan, around 6,000 modules will have been installed on an area of approx. 12,000 m² and over 60,000 metres of cable laid by the middle of the year.

"With a total output of 2.4 MWp, we will be able to generate over 35% of the total electricity consumption at the site ourselves," explains Michael Sustelo, Head of Facility Management at the Karl Mayer Group.

Source:

Karl Mayer Group

Vesta Corporation presented first Sustainability Report (c) Vesta Corporation
05.01.2024

Vesta Corporation: First Sustainability Report

The Tuscan tannery Vesta Corporation has presented to its stakeholders a report outlining its current commitment and future objectives, with a view to innovating, safeguarding and fostering high-end leather material processing.

Ever since it was founded in 1966 in Ponte a Egola, the Tuscan hub for the production of leather for vegetable tanned soles, Vesta has been a supplier and partner of haute couture and sportswear brands, from lightweight calf and half-calf leather, to heavy leathers made with hind and rump hide, for leatherware and shoes.

The Tuscan tannery Vesta Corporation has presented to its stakeholders a report outlining its current commitment and future objectives, with a view to innovating, safeguarding and fostering high-end leather material processing.

Ever since it was founded in 1966 in Ponte a Egola, the Tuscan hub for the production of leather for vegetable tanned soles, Vesta has been a supplier and partner of haute couture and sportswear brands, from lightweight calf and half-calf leather, to heavy leathers made with hind and rump hide, for leatherware and shoes.

To draft this Report, reference was made to the “Global Reporting Initiative Sustainability Reporting Standards” established by the Global Reporting Initiative (GRI). The information in the balance sheet refers to the year 2022 (from 1 January to 31December 2022). Wherever possible, data for the previous year are included, to allow for a comparison of data over time and to assess the trend of Vesta activities. Sustainability is an objective-driven process. This means that comparing data allows for concretely measuring the company’s progress, as it pursues this accounting process year after year.

The improvement actions already implemented by Vesta involve corporate responsibility from an environmental, social and governance perspective. An example are the improved heating and processing plants (which entails the construction of a new tumbling department based on 4.0 technology). This guarantees significant energy, water and economic savings. Along with numerous corporate certifications, the company has passed the Raw Material Traceability test with a score of EXCELLENT, as well as the Carbon and Water footprint analysis.

As confirmation of its commitment to improving corporate performance levels, Vesta has been upgraded from BRONZE (2020) to GOLD in 2023, as assessed by the Leather Working Group (which measures leather manufacturers’ environmental performance for ecological production and for a systemic management of quality, environmental, safety and ethical factors).

Becoming energy-independent is a major step in the pipeline, involving the installation of a photovoltaic plant. This is complemented by the implementation of a project aimed at totally compensating its CO2 emissions for the year subject to accounting and certification. This neutrality will be achieved through the acquisition of credits deriving from projects certified by the United Nations. For example, with the construction of an important hydro-electric plant to which Vesta is contributing. With regard to production, corporate research is currently focused on developing solutions to reduce water and energy use. It is also implementing circular trends by adopting an increasing number of bio-based products, to guarantee the most sustainable end-of-life and waste management for its products.

Source:

Vesta Corporation

Lenzing relies on wind power in the fiber and pulp production (c) Lenzing AG
At the ground-breaking ceremony, from left to right: Josef Reiter (Mayor of Engelhartstetten) Thomas Östros (Vice-President of the European Investment Bank) Helga Krismer-Huber (Green Party Lower Austria LAbg) Stephan Pernkopf (Deputy Governor of Lower Austria) Leonore Gewessler (Minister for Climate Protection) Gregor Erasim (owner of WLK energy) Gerda Holzinger-Burgstaller (Chairwoman of the Management Board of Erste Bank Österreich) Bianca Flesch (Environmental Management Messer Austria GmbH) Mario Wohanka (WLK Chief Financial Officer) Christian Skilich (CTO Lenzing AG)
10.11.2023

Lenzing relies on wind power in the fiber and pulp production

The Lenzing Group has concluded a supply contract with the Austrian electricity producer WLK energy for the purchase of around 13 megawatts of wind power. Lenzing is thus not only underlining its commitment to climate protection and the energy transition, but is also making a long-term investment in a price-stable and diversified electricity supply. The contract has a term of 15 years and provides for supply from the new wind farm in Engelhartstetten from the first quarter of 2025.

The construction of the wind farm is a joint project involving several partners, including the operator and electricity supplier WLK energy, based in Untersiebenbrunn (Lower Austria). The total output of the wind farm with a total of eleven wind turbines will be around 45 megawatts. The share of around 13 megawatts, which will be produced exclusively for the needs of the Lenzing site (Upper Austria), corresponds to the average electricity requirements of around 10,000 households per year in Austria. The ground-breaking ceremony to mark the start of construction took place on November 09, 2023 with representatives from politics and business.

The Lenzing Group has concluded a supply contract with the Austrian electricity producer WLK energy for the purchase of around 13 megawatts of wind power. Lenzing is thus not only underlining its commitment to climate protection and the energy transition, but is also making a long-term investment in a price-stable and diversified electricity supply. The contract has a term of 15 years and provides for supply from the new wind farm in Engelhartstetten from the first quarter of 2025.

The construction of the wind farm is a joint project involving several partners, including the operator and electricity supplier WLK energy, based in Untersiebenbrunn (Lower Austria). The total output of the wind farm with a total of eleven wind turbines will be around 45 megawatts. The share of around 13 megawatts, which will be produced exclusively for the needs of the Lenzing site (Upper Austria), corresponds to the average electricity requirements of around 10,000 households per year in Austria. The ground-breaking ceremony to mark the start of construction took place on November 09, 2023 with representatives from politics and business.

In 2019, Lenzing was the first fiber manufacturer to set itself the goal of reducing its CO2 emissions by 50 percent by 2030 and becoming carbon-neutral by 2050. This CO2 reduction target was recognized by the Science Based Targets Initiative. In 2022, Lenzing opened Upper Austria's largest open-space photovoltaic plant together with Verbund and also signed an electricity supply contract for photovoltaic energy with the green electricity producer Enery and Energie Steiermark.

Source:

Lenzing AG

(c) CHT Group
12.05.2023

CHT Group: New production facility in Bangladesh

Die CHT Group, a worldwide company for chemical specialties, has built a new production facility in Meghna Industrial Economic Zone (MIEZ), Narayanganj which was inaugurated on May 9th, 2023.

Martin Stangs, Regional Sales Manager APAC Auxiliaries at CHT says: “The long-term success story with RH Corporation now comes to an even higher level. In addition to the decade-long service provided by motivated colleagues of RH Corporation and constant visits by well-experienced CHT application field colleagues, CHT products will now be made available locally by our new production facility at CHT Bangladesh. This will further enhance our current high-end offer with in-time deliveries which are now possible. The well-known services provided by our up-to-date laboratory facility in Dhaka will continue to prevail. This is all supported by the profound analytical and technical equipment at CHT Germany as well as CHT Switzerland. Less water, less energy, less time, but still “fit-for-purpose performance”: these requirements are no strangers to us. In alignment with our CHT Group policy ‘We take care’, we will solve these problems, too”.

Die CHT Group, a worldwide company for chemical specialties, has built a new production facility in Meghna Industrial Economic Zone (MIEZ), Narayanganj which was inaugurated on May 9th, 2023.

Martin Stangs, Regional Sales Manager APAC Auxiliaries at CHT says: “The long-term success story with RH Corporation now comes to an even higher level. In addition to the decade-long service provided by motivated colleagues of RH Corporation and constant visits by well-experienced CHT application field colleagues, CHT products will now be made available locally by our new production facility at CHT Bangladesh. This will further enhance our current high-end offer with in-time deliveries which are now possible. The well-known services provided by our up-to-date laboratory facility in Dhaka will continue to prevail. This is all supported by the profound analytical and technical equipment at CHT Germany as well as CHT Switzerland. Less water, less energy, less time, but still “fit-for-purpose performance”: these requirements are no strangers to us. In alignment with our CHT Group policy ‘We take care’, we will solve these problems, too”.

Sustainability is anchored at CHT Group and plays an important role in Bangladesh, too. The new facility of the CHT Group in Bangladesh contributes to sustainability in more ways: The roofs of two buildings are fully covered with solar photovoltaic modules. For a proper use of natural light all the other buildings have periphery glass and transparent roofs There are additionally a ground water tank to harvest rainwater as well as a biological effluent treatment plant to reuse treated water as process water in the plant.

Source:

CHT Germany GmbH

24.03.2023

RadiciGroup: Zeta Polimeri becomes Radici EcoMaterials Srl

A little over three years have passed since RadiciGroup announced the acquisition of Zeta Polimeri, an Italian company headquartered in Buronzo (VC) with over 30 years' experience in the recovery of pre- and post-consumer synthetic fibres and thermoplastic materials. Today, the company has become a full member of the Group with its new name Radici EcoMaterials Srl.

The new company’s long-standing know-how, combined with RadiciGroup’s as a whole, will create a virtuous production system that recovers worn-out materials (fabric, yarn and granules), or otherwise unusable materials, and processes them into raw materials available for other production cycles by taking advantage of industrial synergy.

A little over three years have passed since RadiciGroup announced the acquisition of Zeta Polimeri, an Italian company headquartered in Buronzo (VC) with over 30 years' experience in the recovery of pre- and post-consumer synthetic fibres and thermoplastic materials. Today, the company has become a full member of the Group with its new name Radici EcoMaterials Srl.

The new company’s long-standing know-how, combined with RadiciGroup’s as a whole, will create a virtuous production system that recovers worn-out materials (fabric, yarn and granules), or otherwise unusable materials, and processes them into raw materials available for other production cycles by taking advantage of industrial synergy.

Radici EcoMaterials is a strategic production site because it handles all the preliminary recovery stages: the sorting, processing and pre-treatment of materials, including those used for the production of post-consumer yarns and engineering polymers. In this sense, Radici EcoMaterials is in line with the most recent European policies on sustainable textiles, which address minimizing the share of materials destined for disposal sites, favouring instead more structured recycling solutions.

Radici EcoMaterials is also GRS certified. GRS certification ensures the complete traceability of its materials, which are made in a safe plant that meets the highest environmental and social certification standards.

The company is also equipped with a photovoltaic system and, for the portion of its energy needs not covered by the photovoltaic source, it partially relies on renewable energy. The goal is to use 100% green energy in the next few years, in accord with RadiciGroup's goals.

Source:

RadiciGroup

Photo: Freudenberg Performance Apparel
24.11.2022

Freudenberg Performance Materials Apparel: Rooftop photovoltaic coverage at Nantong

Freudenberg recently completed the installation of 13,000m2 of photovoltaic cells on the roof of its new Nantong factory. With a total capacity of 1.6 MW, the new rooftop installation is projected to produce 1.5 million kWh of green electricity each year. In addition to reduced energy consumption from the grid, this new installation will lower CO2 emissions by approximately 1,200 tons/year.

Freudenberg recently completed the installation of 13,000m2 of photovoltaic cells on the roof of its new Nantong factory. With a total capacity of 1.6 MW, the new rooftop installation is projected to produce 1.5 million kWh of green electricity each year. In addition to reduced energy consumption from the grid, this new installation will lower CO2 emissions by approximately 1,200 tons/year.

Beyond the photovoltaic installation, Freudenberg has integrated sustainability into the Nantong factory’s design, with advances in energy conservation and emissions and loss reduction.
The factory uses valley voltage to cool water in its reservoir that is applied to A/C and machine temperature management during working hours. The new waste gas treatment technology enables hot water collected by heat exchangers to be directly reused in production, thereby reducing thermal energy waste. Furthermore, the factory applies a new multi-phase waste gas treatment technology to reduce volatile organic compounds (VOC) emissions. The factory has also incorporated new methods to improve the A-grade rates of bi-elastic interlinings and shirt interlinings, further reducing waste while improving garment quality.

As part of the Group’s sustainable development strategy, Freudenberg Apparel has also launched its House of Sustainability to minimize the impact of production processes on the environment and help customers achieve their sustainability goals, with responsible products across the seasons.

Source:

Freudenberg Performance Apparel

(c) Lenzing AG
03.10.2022

Lenzing: Ground-mounted photovoltaic system becomes operational

The Lenzing Group and VERBUND, an energy transition company, launched the first development stage of the largest ground-mounted photovoltaic system in Upper Austria. Together with its energy partner VERBUND, Lenzing is also paving the way for the transition to zero-emission mobility. The installation of electric vehicle charging infrastructure at the company’s premises underlines Lenzing’s commitment to the energy transition process.

The Lenzing Group and VERBUND, an energy transition company, launched the first development stage of the largest ground-mounted photovoltaic system in Upper Austria. Together with its energy partner VERBUND, Lenzing is also paving the way for the transition to zero-emission mobility. The installation of electric vehicle charging infrastructure at the company’s premises underlines Lenzing’s commitment to the energy transition process.

Thanks to the ground-mounted photovoltaic system at the “Ofenloch” landfill site, Lenzing, in conjunction with VERBUND, is consistently moving forward on the path to a carbon-free energy supply and has commissioned the first half of the new photovoltaic system with a peak power of 2,780 kWp. Full commissioning of the system with a peak power of 5,560 kWp is envisaged in mid-October. Annual electricity production will amount to 6,000,000 kWh, which is expected to cut CO2 emissions by some 4,400 tonnes per year. The Austrian pioneer in fiber production already commissioned three rooftop photovoltaic systems in spring/summer of 2022, with a peak power of 1,454 kWp and annual electricity production of some 1,508,000 kWh. The electricity flows directly into the company’s on-site production and will also power electric charging stations in future. In the first development stage, 16 wallboxes are set to be installed by the end of the year. A further 32 charging points are planned for 2023. The charging stations will be accessible to staff, visitors and the company’s own vehicle fleet.

“VERBUND’s photovoltaic operator model allows us to make the transition to solar power without incurring investment costs or risks. Thanks to the constant expansion in renewable energy, we remain on course to ecologize the value chain, while optimizing our carbon footprint, cutting costs and reducing the load on the grid, as we are using nearly 100 percent of photovoltaic power in our production,” explains Christian Skilich, Chief Pulp Officer of the Lenzing Group.

More information:
Lenzing energy consumption CO2
Source:

Lenzing AG

09.09.2022

Lenzing invests in renewable energy expansion

  • Partnership with green power producer Enery and Energie Steiermark realizes construction of a photovoltaic plant with 5.5 MWpeak capacity
  • Strategic investments in renewables boost energy independence and reduce carbon footprint

The Lenzing Group has signed an electricity supply contract with green power producer Enery and Energie Steiermark to finance a photovoltaic plant in the Deutschlandsberg region (Styria). The electricity generated will supply the fiber and pulp plant at the Lenzing site after commissioning from the fourth quarter of 2023. The electricity supply contract is limited to 20 years.

The plant’s output will amount to 5.5 MWpeak. This corresponds to the average annual electricity demand of more than 1,700 households. Several photovoltaic systems are already being installed at the Lenzing site, including the largest ground-mounted plant in the province of Upper Austria, whose commissioning is imminent.

  • Partnership with green power producer Enery and Energie Steiermark realizes construction of a photovoltaic plant with 5.5 MWpeak capacity
  • Strategic investments in renewables boost energy independence and reduce carbon footprint

The Lenzing Group has signed an electricity supply contract with green power producer Enery and Energie Steiermark to finance a photovoltaic plant in the Deutschlandsberg region (Styria). The electricity generated will supply the fiber and pulp plant at the Lenzing site after commissioning from the fourth quarter of 2023. The electricity supply contract is limited to 20 years.

The plant’s output will amount to 5.5 MWpeak. This corresponds to the average annual electricity demand of more than 1,700 households. Several photovoltaic systems are already being installed at the Lenzing site, including the largest ground-mounted plant in the province of Upper Austria, whose commissioning is imminent.

In 2019, Lenzing became the first fiber manufacturer to set a target to reduce its carbon emissions by 50 percent by 2030 and to be climate neutral by 2050. This carbon reduction target has been confirmed by the Science Based Targets Initiative. Lenzing is also currently investing in reducing carbon emissions at other sites worldwide. Only recently, the Lenzing Group announced that its Indonesian site will also be relying on green energy in the future.

Source:

Lenzing AG

(c) Marchi & Fildi Group
19.10.2021

Marchi & Fildi Group: Positive balance for 10 years of the photovoltaic installation

10 years after the installation of the photovoltaic plant in the production units in the Biellese region, the Marchi & Fildi Group takes stock of the operation and publishes the data on energy produced, consumed, and fed back into the grid.

The photovoltaic plant owned by the Group is made up of 11,385 modules divided between the three facilities in Biella (Production), Cerrione (Dyeing mill) and Verrone (Logistics), which in total cover a surface of 16,515 sq.m.

The balance to be drawn from these 10 years is a positive one: in total 22,974,828 kWh have been produced, of which 7,292,027 kWh have been used in company activities, with a saving in energy costs of approximately €1m over 10 years.  

The energy kWh produced and not used by the company was fed back into the grid and corresponds to the average annual consumption of around 4630 families.*

10 years after the installation of the photovoltaic plant in the production units in the Biellese region, the Marchi & Fildi Group takes stock of the operation and publishes the data on energy produced, consumed, and fed back into the grid.

The photovoltaic plant owned by the Group is made up of 11,385 modules divided between the three facilities in Biella (Production), Cerrione (Dyeing mill) and Verrone (Logistics), which in total cover a surface of 16,515 sq.m.

The balance to be drawn from these 10 years is a positive one: in total 22,974,828 kWh have been produced, of which 7,292,027 kWh have been used in company activities, with a saving in energy costs of approximately €1m over 10 years.  

The energy kWh produced and not used by the company was fed back into the grid and corresponds to the average annual consumption of around 4630 families.*

The Marchi & Fildi Group has always been committed to rationalising electric energy consumption with the aim of contributing towards an eco-sustainable development without compromising the rate of production and the ability to grow. In addition to producing its own electric energy, over the years, the company has also achieved an increasing number of Energy Efficiency Titles (TEE), otherwise known as white certificates. In 2021, 138 TEEs have been awarded as a result of such interventions as the introduction of LED lighting and the optimisation of the production processes which, while still as efficient as before, permit the company to reduce the electric energy consumption of the machinery.

*In the meter class for the range of 3kW to 4.5 kW, the average consumption for residential properties is the equivalent of 3,382 kWh (source: Arera Relazione annual state of services for the year 2020). The calculations are the results of an internal study conducted by the Marchi & Fildi Group.

Source:

Marchi & Fildi Group

Rieter CAMPUS – Foundation Stone Laid (c) Rieter
Rieter Campus Winterthur
09.09.2021

Rieter CAMPUS – Foundation Stone Laid

  • Rieter CAMPUS strengthens innovation strategy and technology leadership position
  • Customer and technology center and administration building ready for occupancy in 2024
  • Commitment to the Winterthur site and to Switzerland as a business location

On September 8, 2021, the foundation stone was laid for the Rieter CAMPUS on the western part of the Rieter site at the Winterthur location, which includes a customer and technology center as well as an administration building. The Rieter CAMPUS will make an important contribution to the implementation of the innovation strategy and to the enhancement of the company’s technology leadership position. At the same time, the investment of around CHF 80 million is a commitment to the Winterthur site and to Switzerland as a business location. 

  • Rieter CAMPUS strengthens innovation strategy and technology leadership position
  • Customer and technology center and administration building ready for occupancy in 2024
  • Commitment to the Winterthur site and to Switzerland as a business location

On September 8, 2021, the foundation stone was laid for the Rieter CAMPUS on the western part of the Rieter site at the Winterthur location, which includes a customer and technology center as well as an administration building. The Rieter CAMPUS will make an important contribution to the implementation of the innovation strategy and to the enhancement of the company’s technology leadership position. At the same time, the investment of around CHF 80 million is a commitment to the Winterthur site and to Switzerland as a business location. 

With a floor area of over 30 000 m2, the Rieter CAMPUS offers space for around   700 ultra-modern workplaces. For this purpose, Rieter and a specialist in office architecture have developed a contemporary space concept for the “Open Space Office” that is tailored to the needs of the company, divided into meeting rooms, focus rooms and some individual offices. The underground car park provides   88 parking spaces, and a further 12 outdoor parking spaces are being created   in front of the technology center.  “In the course of its 225-year company history, Rieter has helped shape the city of Winterthur. The foundation for the future as a leading technology company is now being created with the new CAMPUS. In this way, Rieter is giving a clear indication   of its commitment to the Winterthur site and to Switzerland as a business location”, commented Bernhard Jucker, Chairman of the Board of Directors of Rieter Holding AG.

Innovation is an important part of Rieter’s strategy and crucial for the company’s success. For this reason, Rieter invests more than CHF 50 million annually in research and development. Thanks to this commitment, Rieter is making a   decisive contribution to the further development of systems for sustainable yarn production and their digitization. The Rieter CAMPUS will provide an attractive working environment that promotes creativity and innovation.  The new CAMPUS is a showcase project in terms of economic feasibility, energy efficiency and sustainability. Rieter relies on renewable energy for construction. This includes heat generation via geothermal probes and a photovoltaic system on around 1 300 m2 of roof area. “In this way, the entrepreneurial focus on sustainable and energy-efficient solutions for yarn production is reflected in the overall concept of the CAMPUS,” emphasized Rieter CEO Norbert Klapper.  The move into the new building is planned for 2024.

Source:

Rieter Management AG

(c) Brückner Trockentechnik GmbH & Co. KG
BRÜCKNER ECO-HEAT and ECO-AIR system on the stenter at FEINJERSEY
19.08.2021

Sustainable production technology from BRÜCKNER

  • Long-term partnership between the Austrian textile producer FEINJERSEY and the German textile machinery manufacturer BRÜCKNER

The Feinjersey Group is an internationally operating textile company and supplies the "global players" of the textile industry worldwide. The value chain of the company, which is based in Götzis, Austria, ranges from yarn processing to the finished product.

As a fully integrated production company, the internationally active textile company Feinjersey attaches great importance to a high quality standard and guarantees care at every step in the process chain. With approx. 250 employees and annual sales of around 45 million euros, the company knits, dyes and finishes top-quality knitted fabrics as well as elastic woven fabrics for a wide range of applications.

Products are made for the fashion, sports, workwear and technical textiles sectors. Among other things, fabrics for the automotive industry, laminating backings and coating substrate for artificial leather or foils, construction textiles or fabrics for medical technology are all produced.

  • Long-term partnership between the Austrian textile producer FEINJERSEY and the German textile machinery manufacturer BRÜCKNER

The Feinjersey Group is an internationally operating textile company and supplies the "global players" of the textile industry worldwide. The value chain of the company, which is based in Götzis, Austria, ranges from yarn processing to the finished product.

As a fully integrated production company, the internationally active textile company Feinjersey attaches great importance to a high quality standard and guarantees care at every step in the process chain. With approx. 250 employees and annual sales of around 45 million euros, the company knits, dyes and finishes top-quality knitted fabrics as well as elastic woven fabrics for a wide range of applications.

Products are made for the fashion, sports, workwear and technical textiles sectors. Among other things, fabrics for the automotive industry, laminating backings and coating substrate for artificial leather or foils, construction textiles or fabrics for medical technology are all produced.

The Austrian textile manufacturer has been certified with the Bluesign textile seal and ensures efficient use of resources with modern machinery. Water and energy consumption as well as pollutant emissions are to be reduced to a minimum.

In textile finishing in particular, the focus is on minimising energy consumption as this process is the most energy-intensive in the entire process chain. Feinjersey uses its own photovoltaic system for this purpose, as well as the heat recovery and exhaust air purification systems on the stenter frames. By using the waste heat from production, the company's buildings are heated. All six stenter frames at Feinjersey are made by BRÜCKNER and produce with three-stage heat recovery and exhaust air purification systems.

The latest BRÜCKNER line has a working width of 4.20 m and is mainly used for the finishing of high-ly elastic and extremely sensitive knitted fabric. In order to avoid yellowing on the fabric, the stenter is equipped with an indirect gas heating system. The knitting oil vapours coming from the fabric during the heat-setting process are extracted from the dryer and cleaned in a BRÜCK-NER ECO-AIR exhaust air cleaning system before being extracted to atmosphere. The complete exhaust air treat-ment on the newest stenter is carried out by a multistage BRÜCKNER ECO-HEAT and ECO-AIR system.

Source:

Brückner Trockentechnik GmbH & Co. KG

Ascend expands HiDura™ LCPA production capacity (c) Ascend Performance Materials
APMPR059
09.06.2021

Ascend expands HiDura™ LCPA production capacity

  • New capacity brought online to meet growing demand

Ascend Performance Materials has expanded production capacity for HiDura long-chain polyamides in its Greenwood, S.C., plant. The multi-million dollar expansion will help the company meet growing demand for its new product line.

Launched in Nov. 2020, Ascend’s HiDura PA610 and 612 products are used in a variety of consumer goods, industrial, renewable energy, automotive and electric vehicle applications. “Exceptional ductility, UV weatherability and hydrolysis resistance give HiDura resins and engineered plastics reliable, long-term performance in some of the harshest conditions,” said Kaan Gunes, business manager for HiDura at Ascend. Gunes cited applications in solar photovoltaic supports, battery seals and brush bristles to illustrate the versatility and durability of HiDura. “Each of these parts faces extreme conditions, whether the 25 years a solar PV installation will be exposed to the elements or the constant contact with corrosive chemicals inside a battery cell. The various grades we developed are designed to improve the reliability of our customers’ products.”

  • New capacity brought online to meet growing demand

Ascend Performance Materials has expanded production capacity for HiDura long-chain polyamides in its Greenwood, S.C., plant. The multi-million dollar expansion will help the company meet growing demand for its new product line.

Launched in Nov. 2020, Ascend’s HiDura PA610 and 612 products are used in a variety of consumer goods, industrial, renewable energy, automotive and electric vehicle applications. “Exceptional ductility, UV weatherability and hydrolysis resistance give HiDura resins and engineered plastics reliable, long-term performance in some of the harshest conditions,” said Kaan Gunes, business manager for HiDura at Ascend. Gunes cited applications in solar photovoltaic supports, battery seals and brush bristles to illustrate the versatility and durability of HiDura. “Each of these parts faces extreme conditions, whether the 25 years a solar PV installation will be exposed to the elements or the constant contact with corrosive chemicals inside a battery cell. The various grades we developed are designed to improve the reliability of our customers’ products.”

Ascend, which is the largest fully integrated producer of polyamide 66 resin, used its extensive polymerization knowledge to expand capacity at its Greenwood facility. “We have been polymerizing PA66 in Greenwood for decades,” said Michael Walters, senior site director for Ascend in Greenwood. “Our people understand how to consistently produce high-performance, high-quality materials safely and were excited to see the success of HiDura build off their work.” Ascend continues to expand its HiDura grades to meet the growing needs of its customers.

Source:

EMG

05.05.2021

Lenzing Group with an excellent start into 2021

Lenzing – The Lenzing Group had a clearly positive revenue and earnings development in the first quarter of 2021. Growing optimism in the textile and apparel industry as a result of the vaccination progress and the continuing recovery in retail led to a significant increase in demand and higher prices in the global fiber market.

•    Significant increase in operating result: EBITDA at EUR 94.5 mn, cash flow from operating activities more than tripled
•    Major strategic projects continue fully on track – production start of the lyocell plant in Thailand expected in the fourth quarter 2021
•    Upper Austria’s largest photovoltaic plant at the Lenzing site
•    Lenzing exits Hygiene Austria joint venture
•    Guidance 2021: Lenzing expects operating result at least at pre-crisis level

Please read the attached document for more information.

Lenzing – The Lenzing Group had a clearly positive revenue and earnings development in the first quarter of 2021. Growing optimism in the textile and apparel industry as a result of the vaccination progress and the continuing recovery in retail led to a significant increase in demand and higher prices in the global fiber market.

•    Significant increase in operating result: EBITDA at EUR 94.5 mn, cash flow from operating activities more than tripled
•    Major strategic projects continue fully on track – production start of the lyocell plant in Thailand expected in the fourth quarter 2021
•    Upper Austria’s largest photovoltaic plant at the Lenzing site
•    Lenzing exits Hygiene Austria joint venture
•    Guidance 2021: Lenzing expects operating result at least at pre-crisis level

Please read the attached document for more information.

Source:

Lenzing Aktiengesellschaft

19.01.2021

Lenzing plans Upper Austria's largest ground-mounted photovoltaic plant

With the industrial use of solar energy, Lenzing sets new standards regarding decarbonization in the fiber industry.

The Lenzing Group plans Upper Austria’s largest ground-mounted photovoltaic plant on an area of around 55,000 m². The groundbreaking ceremony is scheduled to take place in summer 2021. After the expected commissioning in the second half of 2021, the plant's output will amount to 5.5 MWpeak. With approximately 16,000 modules, the plant will generate nearly 5,500 megawatt hours per year. This corresponds to the average annual electricity demand of more than 1,700 households and is unique in Upper Austria on this scale.

The photovoltaic plant is an important symbolic milestone for Lenzing on its way to becoming a CO2-neutral manufacturing site. This project is part of Lenzing’s global energy concept, which aims to provide electricity from 100 percent renewable sources in order to reduce CO2 intensity by 50 percent already in 2030 and to be globally climate neutral in 2050.

With the industrial use of solar energy, Lenzing sets new standards regarding decarbonization in the fiber industry.

The Lenzing Group plans Upper Austria’s largest ground-mounted photovoltaic plant on an area of around 55,000 m². The groundbreaking ceremony is scheduled to take place in summer 2021. After the expected commissioning in the second half of 2021, the plant's output will amount to 5.5 MWpeak. With approximately 16,000 modules, the plant will generate nearly 5,500 megawatt hours per year. This corresponds to the average annual electricity demand of more than 1,700 households and is unique in Upper Austria on this scale.

The photovoltaic plant is an important symbolic milestone for Lenzing on its way to becoming a CO2-neutral manufacturing site. This project is part of Lenzing’s global energy concept, which aims to provide electricity from 100 percent renewable sources in order to reduce CO2 intensity by 50 percent already in 2030 and to be globally climate neutral in 2050.

"The great challenges of our time need answers. As a leading company in innovation and sustainability, we are proactively contributing to the achievement of climate targets and setting new standards for our industry," explains Stefan Doboczky, CEO of the Lenzing Group. “In addition to ongoing major investments in CO2 neutral sites such as Thailand and Brazil, innovative projects at existing sites are bringing us one step closer to climate neutrality.”

Source:

Lenzing AG

Sustainable leadership for GtA with new Monforts Montex wide width lines (c) AWOL Media
GtA Managing Director Andreas Niess
27.07.2020

Sustainable leadership for GtA with new Monforts Montex wide width lines

Following the successful commissioning of two new Monforts Montex wide-width stenter lines and additional environmental management equipment at its plant in Germany, GtA – Society for Textile Equipment GmbH – is aiming to be the first textile finishing company to become entirely CO2-neutral in the manufacture of all of its products by 2025.

GtA is a partner company to Germany’s large-format digital printing fabric leader, Georg and Otto Friedrich GmbH, which has has this year been able to considerably expand its portfolio due to the new Monforts lines.

Headquartered in Gross-Zimmern, close to Frankfurt, Georg and Otto Friedrich GmbH and its partners in Germany have an annual production of 37 million square metres of warp knits for a range of end-use applications, including garments, automotive interiors and technical textiles, but increasingly with a concentration on digital printing substrates.

Fault-free textiles

Following the successful commissioning of two new Monforts Montex wide-width stenter lines and additional environmental management equipment at its plant in Germany, GtA – Society for Textile Equipment GmbH – is aiming to be the first textile finishing company to become entirely CO2-neutral in the manufacture of all of its products by 2025.

GtA is a partner company to Germany’s large-format digital printing fabric leader, Georg and Otto Friedrich GmbH, which has has this year been able to considerably expand its portfolio due to the new Monforts lines.

Headquartered in Gross-Zimmern, close to Frankfurt, Georg and Otto Friedrich GmbH and its partners in Germany have an annual production of 37 million square metres of warp knits for a range of end-use applications, including garments, automotive interiors and technical textiles, but increasingly with a concentration on digital printing substrates.

Fault-free textiles

A new standard in pure white, 100% clean and fault-free textile substrates has been demanded by this market in recent years due to the rapid growth in digitally-printed banners and billboards – often referred to as ‘soft signage’.

The substrates of choice for digital printing are 100% polyester warp knits which are resilient and allow excellent take-up of inks, and vibrant colours and clear and precise images to be achieved with digital printing techniques. The knitted construction also has the advantage of elasticity, which is a plus in terms of flexibility for installers.

Critically, the warp knitted fabrics have extremely smooth surfaces which is becoming increasingly important due to the general move away from PVC coatings which were the standard in the past.

It was to finish these fabrics for Georg and Otto Friedrich GmbH as well as providing such services for many other customers, that the GtA plant in Neresheim, Baden-Württemberg, was established in 2015.

The purpose-built plant on a greenfield site was initially equipped with a fully-automated, 72 metre long Monforts installation comprising a washing machine integrated with a 3.6 metre wide, seven-chamber Montex stenter. The line quickly went from single to double shift production and then to 24/7 operation  to meet demand.

Expanded widths

Building on the success of this installation, GtA has now installed two more Montex stenter lines – both in expanded working widths of 5.6 metres and purpose-built at Montex GmbH in Austria.

A six-chamber Montex unit is combined with a washing machine to guarantee the purity of the substrates, while a five-chamber line is integrated with a wide-width coating machine. This new coating capability at GtA has led to a number of new additions to the Georg and Otto Friedrich DecoTex range for digital printing, including wide width fabrics with flame retardant, antimicrobial and non-slip finishes.

The new Montex stenter lines benefit from all of the latest innovations from Monforts, including the Smart Sensor system for the optimised maintenance planning of key mechanical wear components on the stenters. A comprehensive overview of the condition of all parts at any time is now available for operators within the highly intuitive Qualitex visualization software.

With Qualitex, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

Environmental commitment

GtA is run by a seasoned team of textile professionals led by Managing Director Andreas Niess.

“We have received excellent service from Monforts from the outset and we were happy to place the order for these two new lines as part of our ongoing cooperation,” he says. “With all of the latest Monforts advances in technology we are fully in control of all production and quality parameters with these lines, as part of our significant commitment to innovative environmental technology.”

The GtA plant, which operates in near-cleanroom conditions, has also been equipped with proprietary technology to fully exploit the Monforts air-to-air heat recovery systems that are now standard with Montex stenters.

“Around 30 per cent of our investment volume at the site goes to energy-saving measures and we are sure that this commitment is worthwhile,” Mr Niess says. “As an example, our integrated heat recovery system fully exploits the waste heat from the process exhaust air and the burner exhaust gases of the Monforts stenters, allowing us to achieve an exhaust air temperature of  between 30 to 34°C, compared to what would conventionally be between 140 to 160°C. Another focus has been on exhaust air purification technology and here too, the latest technology has been installed with integrated heat recovery elements.”

This, he adds, saves 52% of the energy that would normally be used – equating to 5,800,000 KwH per year. The necessary audits for energy-efficient companies are also carried out annually.

In addition, GtA has purpose-designed the automatic chemical mixing and dosing systems that feed the padders for the key treatments that are carried out on the fabrics through the stenters.

The company is going further, however, in its pursuit of clean production and raw materials.

"We want to be an asset and not a burden on our immediate environment and therefore do not use any additives containing solvents," Mr Niess says. “We were the first to use fully halogen-free flame retardant chemistry, and we use bio-based, finely ground alumina products for the washing process instead of surfactants. PES polyester yarns made from recycled material are also increasingly used and the latest additions to our raw materials portfolio, the RC-Ocean products, are made from recycled sea plastic.

“We are now planning a combined heat and power plant for the production of electrical energy and heat and we will also build a photovoltaic system that converts solar radiation into electrical energy. GtA wants to be the first textile finishing company to be CO2-neutral in the manufacture of all of its products by 2025. The complete heat supply and heating for the 13,000 square metre production hall, as well as the office building and the hot water supply for the domestic water, is already energy-neutral. We are convinced that this commitment will pay off in the long term and our positive business development proves that sustainability and business profitability are perfectly compatible.”

In addition to the products for Georg and Otto Friedrich GmbH, GtA  offers its manufacturing capacities for other customers as a contract service.

All products are manufactured in accordance with Öko-Tex Standard 100, product class 1 and the company is also involved in the research and development of new sustainable manufacturing processes, in cooperation with many regional universities and funding project partners.

Source:

AWOL Media for A. Monforts Textilmaschinen GmbH & Co. KG

Metalbottoni strengthens its partnerships with northern Europe thanks to its green range. (c) Metalbottoni SPA
23.10.2018

Metalbottoni strengthens its partnerships with northern Europe thanks to its green range.

  • At Kingpins Show Amsterdam (24-25 October) the new “Committed Accessories” dedicated to denim take centre stage.

For the appointment with the exhibition dedicated to denim Metalbottoni focuses on its new range of increasingly green accessories which have captured the attention of the northern European brands most attentive to sustainability in the world of jeans and elsewhere. A range of proposals which, in recent months, has progressed remarkably, following the rules established by the corporate responsibility protocol called NO IMPACT.

This is a responsible approach underlined by the promise “Committed Accessories”, but also a strategic choice with a view to approaching those markets which so far have appeared to be most keen on the subject, for example northern Europe, Benelux and the United States, California in particular. This means that Metalbottoni is acting with increasing assertiveness on those scenarios where it has been present for a long time, in order to increase the segments depth, intercepting new ones, thanks to its wide-ranging eco-compatible proposal.

  • At Kingpins Show Amsterdam (24-25 October) the new “Committed Accessories” dedicated to denim take centre stage.

For the appointment with the exhibition dedicated to denim Metalbottoni focuses on its new range of increasingly green accessories which have captured the attention of the northern European brands most attentive to sustainability in the world of jeans and elsewhere. A range of proposals which, in recent months, has progressed remarkably, following the rules established by the corporate responsibility protocol called NO IMPACT.

This is a responsible approach underlined by the promise “Committed Accessories”, but also a strategic choice with a view to approaching those markets which so far have appeared to be most keen on the subject, for example northern Europe, Benelux and the United States, California in particular. This means that Metalbottoni is acting with increasing assertiveness on those scenarios where it has been present for a long time, in order to increase the segments depth, intercepting new ones, thanks to its wide-ranging eco-compatible proposal.

NO IMPACT: “Committed Accessories” expanded

It is the constant search for sustainable innovation that reveals the extent of the progress made over the past few months by Metalbottoni. For the Kingpins Show exhibition, there are many novelties in store from the company, extending its range in terms of sustainability. Firstly, there is the new MONSTER line eco-processing, special for pure denim, which – apart from metal – includes new material solutions developed through high-profile collaborations.

Also the LEATHER ACCESSORIES line is extending its range of sustainable materials. The line of tags and rear waistband labels is enhanced through interpretations based on two new eco-friendly materials: recycled jacron and cork. For denim designed to be 100% green, also in accessories. Sustainable proposals are increasingly integrated throughout the Metalbottoni range, for example the new glossy and satin finishing developed for the line LABORA on exclusive metal accessories.

Partnerships with brands from northern Europe: Bik Bok and Kings of Indigo

One of the most important collaboration in sustainable fashion is the one with the Norwegian brand Bik Bok. The brand that was founded in 1973 dedicated to young women, today offer accessible trend driven fashion through a network of over 200 single-brand stores in Norway, Sweden, Finland and Austria. The brand has since 2017 chosen to use only BCI (Better Cotton Initiative) certified cotton for their in house premium denim brand Never Denim. For Never Denim Metalbottoni has realized a series of jeans buttons and personalized rivets, all entirely produced according to the NO IMPACT protocol; which means recycled raw materials, no use of chemical agents, through processing and machinery that minimize the use of water and electricity, resulting 100% from photovoltaic panels. All these features are part of a capsule developed for the new AW 2018 collection for Never Denim entirely made with Fair Trade certified cotton. Thanks to this project, the No Impact becomes an integral part of a collection that is aimed at a very large, young and aware public.

Another important brand which has chosen the new NO IMPACT metal accessories is Kings Of Indigo, the Dutch denim mill which is presenting top-quality jeans, inspired by traditional American style, combined with Japanese attention to detail, which today has as many 250 authorised dealers in 12 countries, with a very strong focus on northern Europe.

More and more sportswear for the new Monster SS 2020 collection

The great Metalbottoni classic dedicated to denim confirms the trend of strongly merging with the world of sportswear. The MONSTER line introduces the style developments of the SS 2020 season, with the range being more and more influenced by technical and sports interpretations, alongside sustainable production processes based on the NO IMPACT protocol. The new MONSTER proposals include items made of non-metal material, using sustainable processes, of natural origin and 100% biodegradable; these accessories are similar in appearance to traditional polyester, interpreted in a responsible way, developed through a series of special and unique effects. Also the button, rivet and small plate range has been restyled, having always been the core of the MONSTER line. Today the number of solutions available increases  hanks to new vintage finishing, developed on metal accessories, which are also totally green. “The denim world is moving in a clear direction: that of sustainability.” says Maria Teresa Ricciardo, Creative Director at Metalbottoni, “This is true in particular for some markets, which are strategic for us, and where we are proving increasingly successful, thanks to constant product and process research from a green  perspective, which Metalbottoni today is able to offer within the framework of the NO IMPACT pathway which we have been pursuing for a long time”.