From the Sector

from to
Reset
24 results
20.05.2022

DiloGroup at ITM + Hightex 2022

International textile producers meet again in Istanbul, Turkey, from June 14 – 18, 2022 on the occasion of the ITM + Hightex Exhibition. In Hall 9 (Hightex) the exhibitors will present the complete industry value chain from nonwovens raw materials, production machines and accessories to the endproduct. The related industries covered include hygiene, filtration, fabrics and apparel, medical, automotive, wipes, home furnishings and upholstery. DiloGroup offers tailor-made production systems from one supplier and will inform about its portfolio and the latest equipment developments from fibre opening to the finished felt.

International textile producers meet again in Istanbul, Turkey, from June 14 – 18, 2022 on the occasion of the ITM + Hightex Exhibition. In Hall 9 (Hightex) the exhibitors will present the complete industry value chain from nonwovens raw materials, production machines and accessories to the endproduct. The related industries covered include hygiene, filtration, fabrics and apparel, medical, automotive, wipes, home furnishings and upholstery. DiloGroup offers tailor-made production systems from one supplier and will inform about its portfolio and the latest equipment developments from fibre opening to the finished felt.

DiloGroup will inform about complete lines as well as high speed needlelooms for spunbonds. A new, simplified elliptical needle beam drive makes Hyperpunch technology also attractive for standard application. Hyperpunch HαV allows a more uniform stitch distribution in the preneedling process especially in combination with the new needle pattern 6000X. In a complete needling line this felt homogenization process can be improved further. The new needle pattern 8000X is a milestone in the needle pattern development process and results in endproduct surfaces with low markings over a wide range of advances/stroke.

Another strong pillar of the sales program over decades has been fibre preparation and high speed webforming equipment for other nonwoven technologies. The further development of the high-speed layering principle “Hyperlayer” made progress for better CD strength through a combination of inline cards and crossline card with crosslapper. Particularly, carding machines in a working width above 3.5 m up to 5.1 m have been supplied by DiloSpinnbau as complete high speed carding systems, comprising two or even three cards in a line to directly feed the hydroentangling units of various suppliers. Together with DiloTemafa not only have high throughput rates been achieved in the fibre preparation section of the line but also dedusting filtering and air-conditioning systems have been successfully engineered and integrated.

Together with Sicam, Dilo has combined know-how for hydroentangling technology and therefore can provide complete lines as general contractor including equipment for cutting, winding and packaging.

Another interesting machine is the 3D-Lofter, first presented during ITMA 2019 in Barcelona, which offers a wider range of nonwovens applications by exploring the third dimension. A series of single web forming units which work according to the aerodynamic web forming principle deliver defined fibre masses in varied patterns on a base needlefelt. A stress oriented production of technical formed parts resulting in fibre savings or patterned DI-LOUR or DI-LOOP felts with or without repeat are two examples for this technology which explores new application areas for needlefelts.
The 3D-Lofter technology may also be used “inverted” as “IsoFeed” for filling up bad spots in web mats and thus achieves a better homogeneity of spunlace or airlay products.

The DiloLine 4.0 concept offer I4.0 modules which not only support the user but also facilitate quality control and maintenance by a maximum data transparency in production and control of operation. The Dilo solutions “Smart Start” for a fully automatic start of the production line or “DI-LOWATT” for energy savings are accompanied by Siemens solutions which can be selected via App or Data Cloud “MindSphere”.

More information:
DiloGroup ITM Hightex nonwovens
Source:

DiloGroup

(c) DiloGroup
23.02.2022

DiloGroup at IDEA 2022

Dilo, a leading equipment supplier of complete lines for staple fibre nonwoven fabric production, will exhibit at IDEA 2022 in Miami, end of March.
 
The most recent machine concepts from DiloGroup companies DiloTemafa, DiloSpinnbau and DiloMachines will be promoted with the emphasis on new equipment components which improve product quality, increase line capacity and also enable new opportunities in nonwoven production.
 
DiloTemafa will promote the improved bale opener series “Baltromix Pro” with design features for the operating assistance with the I4.0 components “Bale Timer”, cleaning control, better accessibility for maintenance and the “DI-LOWATT” system for energy savings in fibre transport. The proven carding willow with modified workers and separate drives to create the prerequisites for a good fine opening will also be part of the presentation as well as the fine opening stage which may be installed over the material box of the new card feeder FRS-P to achieve a high dosing accuracy in cross and longitudinal direction.  
 

Dilo, a leading equipment supplier of complete lines for staple fibre nonwoven fabric production, will exhibit at IDEA 2022 in Miami, end of March.
 
The most recent machine concepts from DiloGroup companies DiloTemafa, DiloSpinnbau and DiloMachines will be promoted with the emphasis on new equipment components which improve product quality, increase line capacity and also enable new opportunities in nonwoven production.
 
DiloTemafa will promote the improved bale opener series “Baltromix Pro” with design features for the operating assistance with the I4.0 components “Bale Timer”, cleaning control, better accessibility for maintenance and the “DI-LOWATT” system for energy savings in fibre transport. The proven carding willow with modified workers and separate drives to create the prerequisites for a good fine opening will also be part of the presentation as well as the fine opening stage which may be installed over the material box of the new card feeder FRS-P to achieve a high dosing accuracy in cross and longitudinal direction.  
 
DiloSpinnbau has a new “Unifeed” card feeder (VRS-P) which combines the principle of volumetric charged feeding with the characteristics of a chute feeder but without the conventional overhead trunk which allows for lower ceiling height requirement. The fibre flock matt is condensed by a vacuum delivery apron to give better uniformity of mass distribution. The distribution over the working width is controlled by additional flaps. This feeder can be adapted for medium/fine, coarse/medium or long staple fibres.
 
The “VectorQuadroCard” by DiloSpinnbau incorporates a modular transfer group between breast and main section. The quick change facility of this roller group provides different carding options. The delivery system is also flexible to provide parallel laid, random or condensed web. The preopener section on this card has 4 worker/stripper pairs with five pairs on the main cylinder. Emphasis is on high throughput with good web quality.
 
The revised HyperLayer NT offered by DiloMachines presents the latest state-of-the-art highspeed precision layering technique setting new standards which play an important role especially in hydroentanglement lines. In this application, it is important to achieve layering speeds up to 190 m/minute using sophisticated viscose fibres and a layering width of about 4 m while at the same time having a high layering precision in cross and longitudinal direction.  
 
DiloMachines will also present its portfolio to improve quality and reduce costs. The FutureLine study “3D-Lofter” – first presented at ITMA 2019 in Barcelona – is part of this programme. In this study individual web forming units can deposit fibre masses on freely programmable spots in longitudinal and cross direction thus saving overall fibre mass in applications such as deep moulded parts for the automotive interior. This ability reduces costs in production and operation. The “IsoFeed” concept for a more even flock mat for direct cards and aerodynamic web forming is another interesting field of web mat quality improvement.

More information:
IDEA DiloGroup nonwovens machinery
Source:

DiloGroup

DiloGroup at Techtextil India (c) DiloGroup
3D-Lofter
20.10.2021

DiloGroup at Techtextil India

  • DiloGroup looks forward to participating in the Techtextil India show 2021.

DiloGroup offers tailor-made production systems from one supplier and will inform at this forum in the German pavillon about its portfolio and the latest equipment developments from fibre opening to the finished felt.

A new, simplified elliptical needle beam drive makes Hyperpunch technology also attractive for standard application. Hyperpunch HαV allows a more uniform stitch distribution in the preneedling process especially in combination with the new needle pattern 6000X. In a complete needling line this felt homogenization process can be improved further by using the new needle pattern 8000X which is a milestone in the needle pattern development process and results in endproduct surfaces with low markings over a wide range of advances/stroke.

  • DiloGroup looks forward to participating in the Techtextil India show 2021.

DiloGroup offers tailor-made production systems from one supplier and will inform at this forum in the German pavillon about its portfolio and the latest equipment developments from fibre opening to the finished felt.

A new, simplified elliptical needle beam drive makes Hyperpunch technology also attractive for standard application. Hyperpunch HαV allows a more uniform stitch distribution in the preneedling process especially in combination with the new needle pattern 6000X. In a complete needling line this felt homogenization process can be improved further by using the new needle pattern 8000X which is a milestone in the needle pattern development process and results in endproduct surfaces with low markings over a wide range of advances/stroke.

The “3D-Lofter” which was first presented during ITMA 2019 in Barcelona offers a wider range of nonwovens applications by exploring the third dimension. A series of single web forming units which work according to the aerodynamic web forming principle deliver defined fibre masses in varied patterns on a base needlefelt. A stress oriented production of technical formed parts resulting in fibre savings or patterned DI-LOUR or DI-LOOP felts are two examples for this technology which explores new application areas for needlefelts.

The 3D-Lofter technology may also be used “inverted” for filling up bad spots in web mats and thus achieves a better homogeneity of e. g. spunlace, thermobond or airlay products. The DiloLine 4.0 concept offer I4.0 modules which not only support the user but also facilitate quality control and maintenance by a maximum data transparency in production and control of operation. The Dilo solutions “Smart Start” for a fully automatic start of the production line or “DI-LOWATT” for energy savings are accompanied by Siemens solutions which can be selected via App or Data Cloud “MindSphere”.

With more than 370 installations delivered to the nonwovens industry worldwide, DiloGroup has the necessary know-how and the complete equipment portfolio to engineer the perfect production line for any product specification. The efficiency of Dilo production lines is the result of long-term research work and experience. Apart from machines for needling technology we offer in cooperation with partner companies also production lines including thermobonding and hydroentangling components.

Source:

Oskar Dilo Maschinenfabrik KG

3D-Lofter. Photo: (c) DiloGroup
26.08.2021

DiloGroup at INDEX

After a long break, the international nonwovens industry will meet again in Geneva, Switzerland, from October 19 to 22, 2021 on the occasion of INDEX. DiloGroup offers tailormade production systems from one supplier and will inform about its portfolio and the latest equipment developments from fibre opening to the finished felt.

A new, simplified elliptical needle beam drive makes Hyperpunch technology also attractive for standard application. Hyperpunch HαV allows a more uniform stitch distribution in the preneedling process especially in combination with the new needle pattern 6000X. In a complete needling line this felt homogenization process can be improved further by using the new needle pattern 8000X which is a milestone in the needle pattern development process and results in endproduct surfaces with low markings over a wide range of advances/stroke.

After a long break, the international nonwovens industry will meet again in Geneva, Switzerland, from October 19 to 22, 2021 on the occasion of INDEX. DiloGroup offers tailormade production systems from one supplier and will inform about its portfolio and the latest equipment developments from fibre opening to the finished felt.

A new, simplified elliptical needle beam drive makes Hyperpunch technology also attractive for standard application. Hyperpunch HαV allows a more uniform stitch distribution in the preneedling process especially in combination with the new needle pattern 6000X. In a complete needling line this felt homogenization process can be improved further by using the new needle pattern 8000X which is a milestone in the needle pattern development process and results in endproduct surfaces with low markings over a wide range of advances/stroke.

The “3D-Lofter” which was first presented during ITMA 2019 in Barcelona offers a wider range of nonwovens applications by exploring the third dimension. A series of single web forming units which work according to the aerodynamic web forming principle deliver defined fibre masses in varied patterns on a base needlefelt. A stress oriented production of technical formed parts resulting in fibre savings or patterned DI-LOUR or DI-LOOP felts are two examples for this technology which explores new application areas for needlefelts The 3D-Lofter technology may also be used “inverted” for filling up bad spots in web mats and thus achieves a better homogeneity of e. g. spunlace, thermobond or airlay products.

The DiloLine 4.0 concept offer I4.0 modules which not only support the user but also facilitate quality control and maintenance by a maximum data transparency in production and control of operation. The Dilo solutions “Smart Start” for a fully automatic start of the production line or “DI-LOWATT” for energy savings are accompanied by Siemens solutions which can be selected via App or Data Cloud “MindSphere”.

Apart from machines for needling technology we offer in cooperation with partner companies also production lines including thermobonding and hydroentangling components.

More information:
DiloGroup Dilo INDEX
Source:

DiloGroup

Rieter Holding Ltd.
Rieter Holding Ltd.
03.02.2020

Rieter signed additional contracts at the Swiss-Egyptian Investment Forum

At the Swiss-Egyptian Investment Forum which took place on February 3 in Cairo (Egypt), the Cotton & Textiles Holding Company and Rieter signed additional contracts related to the modernization program for the Egyptian textile industry.

Further Orders from Egypt:

  • Contracts for additional projects signed in Cairo
  • Order volume is around 30 million Swiss francs
  • Order intake in the first half year of 2020 expected

The total volume of the contracts sums up to around 210 million Swiss Francs, including the contracts which had been signed at ITMA 2019 in Barcelona and which represent a volume of around 180 million Swiss Francs.

Rieter expects the full amount of orders to be booked as order intake in the first half year of 2020. So far, 165 million Swiss Francs have been booked.

 

At the Swiss-Egyptian Investment Forum which took place on February 3 in Cairo (Egypt), the Cotton & Textiles Holding Company and Rieter signed additional contracts related to the modernization program for the Egyptian textile industry.

Further Orders from Egypt:

  • Contracts for additional projects signed in Cairo
  • Order volume is around 30 million Swiss francs
  • Order intake in the first half year of 2020 expected

The total volume of the contracts sums up to around 210 million Swiss Francs, including the contracts which had been signed at ITMA 2019 in Barcelona and which represent a volume of around 180 million Swiss Francs.

Rieter expects the full amount of orders to be booked as order intake in the first half year of 2020. So far, 165 million Swiss Francs have been booked.

 

Source:

Rieter Holding Ltd.

(c) A. Monforts Textilmaschinen GmbH & Co. KG
12.07.2019

Further benefits and savings with the new Monforts MonforClean

A. Monforts Textilmaschinen GmbH & Co. KG presented an energy-optimised new version of its industry-leading Montex stenter for the first time at ITMA 2019 in Barcelona from June 20-26th.

With the introduction of the new MonforClean exhaust air treatment system and other unique process innovations, Monforts has been able to further reduce the energy consumption of Montex stenters by a further 13%.

Exhaust air treatment on stenter frames has posed particular challenges over the years, since the air can contain significant amounts of oil, fibre and even wax particles that may see emissions limits being reached in the processing of certain fabrics, depending on the legal specifications.

In addressing this issue, Monforts is now incorporating the MonforClean module into the stenter frame, so there is no additional space requirement. At the same time, the costs for laborious secondary installations and the piping of the exhaust air treatment components, as well as supporting structures are eliminated due to the machine configuration.

A. Monforts Textilmaschinen GmbH & Co. KG presented an energy-optimised new version of its industry-leading Montex stenter for the first time at ITMA 2019 in Barcelona from June 20-26th.

With the introduction of the new MonforClean exhaust air treatment system and other unique process innovations, Monforts has been able to further reduce the energy consumption of Montex stenters by a further 13%.

Exhaust air treatment on stenter frames has posed particular challenges over the years, since the air can contain significant amounts of oil, fibre and even wax particles that may see emissions limits being reached in the processing of certain fabrics, depending on the legal specifications.

In addressing this issue, Monforts is now incorporating the MonforClean module into the stenter frame, so there is no additional space requirement. At the same time, the costs for laborious secondary installations and the piping of the exhaust air treatment components, as well as supporting structures are eliminated due to the machine configuration.

(c) Monforts Textilmaschinen GmbH & Co. KG
12.07.2019

Monforts: Introduction of CYD multi-colour yarn dyeing system at ITMA 2019

A revolutionary new system for yarn dyeing based on the proven Econtrol® dyeing system for fabrics will be introduced by A. Monforts Textilmaschinen GmbH & Co. KG at ITMA 2019 in Barcelona, Spain, from June 20-26.

This latest CYD denim processing technology integrates new functions and processes into the weaving preparatory processes – spinning, direct beaming, warping and assembly beaming, followed by sizing and dyeing – in order to increase quality, flexibility, economic viability and productivity.

“Denim finishing is a field in which Monforts has an undisputed lead and we have been working closely with our many partners in the key denim manufacturing countries of China, Bangladesh, India, Pakistan, Mexico and Brazil to develop new advanced solutions,” says Monforts Head of Denim Hans Gerhard Wroblowski. “The CYD system has been developed in response to a very strong market demand.”

A revolutionary new system for yarn dyeing based on the proven Econtrol® dyeing system for fabrics will be introduced by A. Monforts Textilmaschinen GmbH & Co. KG at ITMA 2019 in Barcelona, Spain, from June 20-26.

This latest CYD denim processing technology integrates new functions and processes into the weaving preparatory processes – spinning, direct beaming, warping and assembly beaming, followed by sizing and dyeing – in order to increase quality, flexibility, economic viability and productivity.

“Denim finishing is a field in which Monforts has an undisputed lead and we have been working closely with our many partners in the key denim manufacturing countries of China, Bangladesh, India, Pakistan, Mexico and Brazil to develop new advanced solutions,” says Monforts Head of Denim Hans Gerhard Wroblowski. “The CYD system has been developed in response to a very strong market demand.”

(c) Mayer & Cie GmbH & Co. KG
05.07.2019

Mayer & Cie: Positive stock of ITMA 2019

For the circular knitting machine manufacturer Mayer & Cie. (MCT) this year’s ITMA ended with a satisfactory result. From 20 to 26 June 2019 the company had five machines on show at the leading industry trade fair in Barcelona. The industry leader’s focus was on sporting uses, with one exhibit dedicated to Mayer & Cie.’s innovative ideas. Digital offerings that Mayer & Cie. put together under the name knitlink rounded off the presentation. The platform includes a web shop, remote maintenance options and recording and evaluation of machine data for the customer and is to be further expanded in the future.

For the circular knitting machine manufacturer Mayer & Cie. (MCT) this year’s ITMA ended with a satisfactory result. From 20 to 26 June 2019 the company had five machines on show at the leading industry trade fair in Barcelona. The industry leader’s focus was on sporting uses, with one exhibit dedicated to Mayer & Cie.’s innovative ideas. Digital offerings that Mayer & Cie. put together under the name knitlink rounded off the presentation. The platform includes a web shop, remote maintenance options and recording and evaluation of machine data for the customer and is to be further expanded in the future.

More information:
Mayer & Cie ITMA 2019
Source:

Mayer & Cie GmbH & Co. KG

(c) IRO AB
05.07.2019

IRO AB: Zero twist for composite fabrics guaranteed

IRO AB, a member of the Vandewiele group, reports strong interest in its ZTF Zero Twist Feeder introduced at the recent ITMA 2019 in Barcelona, Spain, particularly from companies involved in the growing market of textile reinforcements for composites.

In the weaving of fibres such as carbon, glass and aramids, as well as thermoplastic tapes for highly-engineered composite fabrics, it is essential that there is no twist in the feed, which this new machine absolutely guarantees.

“The ZTF Zero Twist Feeder keeps the tape yarns or fibre tows constantly stretched to avoid the risks of any snarls or twisting,” explains Sales and Marketing Manager Pär Hedman. “During ITMA 2019 I spoke to many companies interested in this new machine, which will be supplied in bespoke versions specific to the individual needs of each customer and the intended end-use.”

IRO AB, a member of the Vandewiele group, reports strong interest in its ZTF Zero Twist Feeder introduced at the recent ITMA 2019 in Barcelona, Spain, particularly from companies involved in the growing market of textile reinforcements for composites.

In the weaving of fibres such as carbon, glass and aramids, as well as thermoplastic tapes for highly-engineered composite fabrics, it is essential that there is no twist in the feed, which this new machine absolutely guarantees.

“The ZTF Zero Twist Feeder keeps the tape yarns or fibre tows constantly stretched to avoid the risks of any snarls or twisting,” explains Sales and Marketing Manager Pär Hedman. “During ITMA 2019 I spoke to many companies interested in this new machine, which will be supplied in bespoke versions specific to the individual needs of each customer and the intended end-use.”

More information:
IRO AB Vandewiele ITMA 2019
Source:

TMAS by AWOL Media.

(c) Mimaki Europe B.V.
04.07.2019

Hybriddrucker-Demonstration von Mimaki auf der ITMA 2019

  • Der neue Hybriddrucker ermöglicht den Einstieg in Textildirektdruck und Direkttransferdruck.
  • Dank der Flexibilität der Druckmaschine können kleinere Druckdienstleister ihr Anwendungsspektrum erweitern und sich neue Märkte erschließen.

Mimaki Engineering, ein Hersteller von Inkjetdruckern und Schneideplottern, hat heute über die weltweit erste Vorführung eines brandneuen digitalen Textil-Hybriddruckers aus der TX300P-Serie bei der ITMA 2019 informiert (20. bis 26. Juni in Barcelona, Halle 3, Stand B110). Besonderheit des neuen Druckers ist die Eignung für Textildirektdruck und Direkttransferdruck – damit wird eine beispiellose Flexibilität bei Tintenkombinationen und Substraten erreicht, was profitable neue Geschäftschancen eröffnet.

  • Der neue Hybriddrucker ermöglicht den Einstieg in Textildirektdruck und Direkttransferdruck.
  • Dank der Flexibilität der Druckmaschine können kleinere Druckdienstleister ihr Anwendungsspektrum erweitern und sich neue Märkte erschließen.

Mimaki Engineering, ein Hersteller von Inkjetdruckern und Schneideplottern, hat heute über die weltweit erste Vorführung eines brandneuen digitalen Textil-Hybriddruckers aus der TX300P-Serie bei der ITMA 2019 informiert (20. bis 26. Juni in Barcelona, Halle 3, Stand B110). Besonderheit des neuen Druckers ist die Eignung für Textildirektdruck und Direkttransferdruck – damit wird eine beispiellose Flexibilität bei Tintenkombinationen und Substraten erreicht, was profitable neue Geschäftschancen eröffnet.

Das neue Drucksystem stellt eine Weiterentwicklung des Mimaki TX300P-1800 dar, der um die Möglichkeit des Direkttransferdrucks ergänzt wurde. Druckdienstleister profitieren von der größeren Vielseitigkeit in Bezug auf Stoffe, Applikationen und Zielmärkte. Insbesondere kleinere Druckdienstleister erhalten die Möglichkeit, mit nur einem Drucksystem eine umfassende Palette von Textildruckanwendungen zu bieten. Entsprechend dem Komplettausstatter-Ansatz von Mimaki ist der Drucker kompatibel zu allen Mimaki-Geräten für Vorbehandlung, Dämpfen und Waschen.

More information:
Mimaki ITMA 2019
Source:

Mimaki Europe B.V.

(c) Rieter
24.06.2019

Rieter Awarded Large Contract from Egypt

 

  • Contracts signed for seven projects
  • Contract comprises delivery of compact- and ring-spinning systems
  • Total amounts to roughly CHF 180 million
  • Order intakes are anticipated to be realized in 2019; sales posted in the 2020/2021 financial years

Rieter Group has signed contracts with the Cotton & Textile Industries Holding Company, Cairo (Egypt), at the ITMA 2019. These seven projects entail a total of 180 million Swiss francs. The contract comprises delivery of compact- and ring-spinning systems over the next two years. This order is part of a comprehensive modernization program of the Egyptian textile industry. The order intakes are anticipated to be realized in 2019 with sales posted in the 2020/2021 financial years.

The contracts were signed at the ITMA in Barcelona, Spain, by Dr. Ahmed Moustafa Mohamed, Chairman Cotton & Textile Industries Holding Company, and Dr. Norbert Klapper, CEO Rieter.

 

  • Contracts signed for seven projects
  • Contract comprises delivery of compact- and ring-spinning systems
  • Total amounts to roughly CHF 180 million
  • Order intakes are anticipated to be realized in 2019; sales posted in the 2020/2021 financial years

Rieter Group has signed contracts with the Cotton & Textile Industries Holding Company, Cairo (Egypt), at the ITMA 2019. These seven projects entail a total of 180 million Swiss francs. The contract comprises delivery of compact- and ring-spinning systems over the next two years. This order is part of a comprehensive modernization program of the Egyptian textile industry. The order intakes are anticipated to be realized in 2019 with sales posted in the 2020/2021 financial years.

The contracts were signed at the ITMA in Barcelona, Spain, by Dr. Ahmed Moustafa Mohamed, Chairman Cotton & Textile Industries Holding Company, and Dr. Norbert Klapper, CEO Rieter.

Dr. Klapper was very pleased at the formal signing of contracts: “We would like to thank our Egyptian business partners for the confidence they are placing in Rieter by awarding us this contract. Rieter has been the partner of choice of the Egyptian spinning industry for decades. We are delighted to be given the opportunity of making such an important contribution to the modernization of the Egyptian textile industry.”

Source:

Media Relations, Rieter Management AG

19.06.2019

Rieter at ITMA 2019 in Barcelona

At ITMA 2019, Rieter showcases innovations for all four spinning processes that are established on the market. These innovations are designed to reduce raw material, energy and labor costs, while also increasing productivity during production of the yarn quality required in each case. Solutions to increase the flexibility of the spinning mill are also presented. In addition, Rieter presents two solutions for the production of innovative yarns.

At ITMA 2019, Rieter showcases innovations for all four spinning processes that are established on the market. These innovations are designed to reduce raw material, energy and labor costs, while also increasing productivity during production of the yarn quality required in each case. Solutions to increase the flexibility of the spinning mill are also presented. In addition, Rieter presents two solutions for the production of innovative yarns.

More information:
Rieter ITMA 2019
Source:

Rieter

(c) Mayer & Cie
13.06.2019

Mayer & Cie.: OVJA 1.1 EETT jacquard machine debuts at ITMA

Mayer & Cie. (MCT) is premiering the OVJA 1.1 EETT at the industry’s leading trade fair, ITMA. A premium jacquard machine, it is part of the focus on sports of the company’s “Stay a winner: With Mayer & Cie.” presentation in Barcelona. The industry leader developed the OVJA 1.1 EETT especially for the manufacture of shoe uppers now that “fabrics” are in demand for sports and leisure footwear. The OVJA 1.1 EETT comes with double electronics and double transfer technology, which is reflected in an extra variety of patterns and, in particular, in innovative hole structures.

“The OVJA 1.1 EETT is yet another machine in our portfolio with which customers can claim to be on the winning side in keeping with our ITMA slogan ‘Stay a winner: With Mayer & Cie.’,” says Marcus Mayer, Managing Director of Mayer & Cie. in charge of technical development. “The OVJA 1.1 EETT is most definitely a premium machine and the right choice for especially exacting requirements such as multi-coloured spacer fabrics with a 3D effect or a wide range of hole structures.”

 

Mayer & Cie. (MCT) is premiering the OVJA 1.1 EETT at the industry’s leading trade fair, ITMA. A premium jacquard machine, it is part of the focus on sports of the company’s “Stay a winner: With Mayer & Cie.” presentation in Barcelona. The industry leader developed the OVJA 1.1 EETT especially for the manufacture of shoe uppers now that “fabrics” are in demand for sports and leisure footwear. The OVJA 1.1 EETT comes with double electronics and double transfer technology, which is reflected in an extra variety of patterns and, in particular, in innovative hole structures.

“The OVJA 1.1 EETT is yet another machine in our portfolio with which customers can claim to be on the winning side in keeping with our ITMA slogan ‘Stay a winner: With Mayer & Cie.’,” says Marcus Mayer, Managing Director of Mayer & Cie. in charge of technical development. “The OVJA 1.1 EETT is most definitely a premium machine and the right choice for especially exacting requirements such as multi-coloured spacer fabrics with a 3D effect or a wide range of hole structures.”

 

More information:
Mayer & Cie ITMA 2019 Jacquard
Source:

Mayer & Cie

(c) FONG’s Europe
03.06.2019

The new Goller Knit Merc for perfect dyeing results

At ITMA 2019 in Barcelona from June 20-26th, Goller will introduce the new Knit Merc for achieving the highest quality mercerization of knitted fabrics at the lowest tension and with under 3% variation in dimensional stability with high grade fabrics, for perfect dyeing results every time.

Mercerization is an essential textile finishing step for all cotton and cellulosic fibre-based fabrics in order to improve dye uptake and tear strength while reducing fabric shrinkage and imparting a silk-like lustre to the materials.

The Knit Merc is the result of intensive R&D developments at Goller and follows the successful introduction to the market of the company’s Sintensa Cyclone drum washing compartments for achieving the highest washing efficiency at the lowest tension.

The Knit Merc being exhibited at ITMA 2019 can accommodate 8.4 metres of fabric in its impregnation compartment and a further four metres in its first chain section to achieve a production speed of 25m/min at 30 seconds dipping time.

At ITMA 2019 in Barcelona from June 20-26th, Goller will introduce the new Knit Merc for achieving the highest quality mercerization of knitted fabrics at the lowest tension and with under 3% variation in dimensional stability with high grade fabrics, for perfect dyeing results every time.

Mercerization is an essential textile finishing step for all cotton and cellulosic fibre-based fabrics in order to improve dye uptake and tear strength while reducing fabric shrinkage and imparting a silk-like lustre to the materials.

The Knit Merc is the result of intensive R&D developments at Goller and follows the successful introduction to the market of the company’s Sintensa Cyclone drum washing compartments for achieving the highest washing efficiency at the lowest tension.

The Knit Merc being exhibited at ITMA 2019 can accommodate 8.4 metres of fabric in its impregnation compartment and a further four metres in its first chain section to achieve a production speed of 25m/min at 30 seconds dipping time.

It is designed for dry-on-wet mercerizing, either cold or hot, and is equipped with an inlet combination of scroll and slat rollers for fabric guidance, a Tandematic uncurler in front of a rubberized de-airing roller and a grooved 320mm bottom roller with 320mm and 600mm perforated upper drums.

It benefits from automatic tension regulation and the low liquor content is ensured by the integrated lye tank and automatic circulation and filtration units.

An 8-ton high efficiency squeezer is stationed at the exit before the chain section and a 5-ton squeezer at the exit of the chain field.

Further fabric control and stability is provided by a cast iron pin chain with automatic optical and mechanical sensors, the Tandematic uncurler, an overfeed device and a driven belt arrangement for fabric support.

Source:

AWOL Media

(c) Epson Deutschland GmbH
28.05.2019

Epson auf der ITMA 2019

Zusammen mit den Tochtergesellschaften For.Tex und Robustelli stellt Epson Lösungen für den Textildruck vor

Epson wird auch 2019 an der ITMA (20. bis 26. Juni, Fira de Barcelona, L'Hospitalet de Llobregat), der weltweit führenden Messe für Textilproduktionsmaschinen, teilnehmen. Auf seinem fast 500 Quadratmeter großen Stand (C210) in Halle 3 der Messe zeigt der japanische Hersteller professioneller Drucklösungen Innovationen und Lösungen für den Textilmarkt. Während das mit am Stand ausstellende Unternehmen For.Tex die Tinten sowie Materialien für die Vor- und Nachbehandlung von Geweben beisteuert, liefert der Epson Partner Robustelli als ein führender Anbieter im Markt der industriellen Textildruckern das Know-how zur Produktion zuverlässiger, industrieller Drucksysteme für eine effiziente und qualitativ hochwertige Textilproduktion.

Zusammen mit den Tochtergesellschaften For.Tex und Robustelli stellt Epson Lösungen für den Textildruck vor

Epson wird auch 2019 an der ITMA (20. bis 26. Juni, Fira de Barcelona, L'Hospitalet de Llobregat), der weltweit führenden Messe für Textilproduktionsmaschinen, teilnehmen. Auf seinem fast 500 Quadratmeter großen Stand (C210) in Halle 3 der Messe zeigt der japanische Hersteller professioneller Drucklösungen Innovationen und Lösungen für den Textilmarkt. Während das mit am Stand ausstellende Unternehmen For.Tex die Tinten sowie Materialien für die Vor- und Nachbehandlung von Geweben beisteuert, liefert der Epson Partner Robustelli als ein führender Anbieter im Markt der industriellen Textildruckern das Know-how zur Produktion zuverlässiger, industrieller Drucksysteme für eine effiziente und qualitativ hochwertige Textilproduktion.

More information:
ITMA 2019 Epson
Source:

Epson Deutschland GmbH

(c) A. Monforts Textilmaschinen GmbH & Co. KG
21.05.2019

Monforts at ITMA 2019

A. Monforts Textilmaschinen GmbH & Co. KG will demonstrate a range of new advances made possible by Industry 4.0 techniques at ITMA 2019 in Barcelona, Spain, from June 20-26.

At stand D101 in Hall 2, visitors will discover the possibilities of ‘digital twin’ capability – now being made available for all Monforts machine systems – and that by exploiting the latest advanced sensor technology, comprehensive technical machine data can now be virtually mapped in the cloud in real time. The data can be easily accessed using the new Monforts Smart Support and Smart Check apps for an instantaneous status overview. All specifications relating to machine performance and the production process can be mapped, to enable vastly simplified and targeted analysis for controlled planning and production. Insights harnessed from such analysis can be used to optimise the actual production process. At the same time, potential sources of error can be anticipated and eliminated, enabling improved machine availability while considerably minimising downtime.

A. Monforts Textilmaschinen GmbH & Co. KG will demonstrate a range of new advances made possible by Industry 4.0 techniques at ITMA 2019 in Barcelona, Spain, from June 20-26.

At stand D101 in Hall 2, visitors will discover the possibilities of ‘digital twin’ capability – now being made available for all Monforts machine systems – and that by exploiting the latest advanced sensor technology, comprehensive technical machine data can now be virtually mapped in the cloud in real time. The data can be easily accessed using the new Monforts Smart Support and Smart Check apps for an instantaneous status overview. All specifications relating to machine performance and the production process can be mapped, to enable vastly simplified and targeted analysis for controlled planning and production. Insights harnessed from such analysis can be used to optimise the actual production process. At the same time, potential sources of error can be anticipated and eliminated, enabling improved machine availability while considerably minimising downtime.

Parts prediction
In addition, the digital twin system provides information on the individual wear parts of a system, such as, for example, converters or gears. “Operators and mill managers are informed by Smart Check sensors when maintenance or the replacement of key components will be required, well ahead of time,” explains Monforts Vice President Klaus A. Heinrichs. “Direct access to the integrated Monforts webshop allows users to instantly order such parts when they are needed, virtually preventing machine downtime.” On request, Monforts can also virtually monitor machine performance and pro-actively alert customers to the need for preventative action. In such cases, however, data is only ever called from the cloud by Monforts when customers have given their full consent, in the interests of data security. Data from Smart Check, for example, can even be used to analyse a system’s energy requirements, allowing machine operation to be optimised by tailoring production runs to the peaks and troughs of electricity costs.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG

(c) Herzog
17.05.2019

ITMA Countdown – Focus Industry 4.0

  • Herzog: Organic start of Industry 4.0 scenarios with an app
  • Mahlo: Better production results with digital help
  • Lindauer DORNIER: An addition to personalized services

On the occasion of a VDMA press conference themed “ITMA countdown” in Frankfurt, speakers from member companies Lindauer DORNIER, Herzog and Mahlo showed how Industry 4.0 solutions are going to impact the textile process chain and what technologies visitors can expect to see at ITMA 2019. The products examples of the respective companies made clear that Industry 4.0 is no end in itself but helps to improve production processes and results and supplements the range of services.

 

Interview 1

Interview 2

 

  • Herzog: Organic start of Industry 4.0 scenarios with an app
  • Mahlo: Better production results with digital help
  • Lindauer DORNIER: An addition to personalized services

On the occasion of a VDMA press conference themed “ITMA countdown” in Frankfurt, speakers from member companies Lindauer DORNIER, Herzog and Mahlo showed how Industry 4.0 solutions are going to impact the textile process chain and what technologies visitors can expect to see at ITMA 2019. The products examples of the respective companies made clear that Industry 4.0 is no end in itself but helps to improve production processes and results and supplements the range of services.

 

Interview 1

Interview 2

 

(c) LTG Aktiengesellschaft
15.05.2019

LTG auf der ITMA Barcelona 2019

Fasern und Produktionsstäube filtern oder Vliese verdichten – mit Systemen von LTG

Ob natürliche Textilien, Nonwovens oder Hightech-Faserherstellung: LTG-Technik sorgt in der Textilbranche für das passende Hallenklima, die Luftströmung zum Legen oder filtert Fasern, um sie für die Entsorgung bzw. das Recycling innerhalb des Prozesses bereitzustellen. Zur Abscheidung von Fasern und Stäuben hat sich unter anderem die Kompaktfiltereinheit CFU bewährt. Sie ist modular aufgebaut und kann aus verschiedenen Filterstufen zusammengestellt werden, zum Beispiel aus dem Vorfilter TVM und dem Feinfilter CompactDrum. Die gefilterten Stoffe lassen sich in Faser- oder Staubkompaktoren sicher und effizient abscheiden. Speziell für größere Luftmengen sind die LTG-Trommelfilter konzipiert. LTG bietet außerdem Radial-, Axial- und Querstromventilatoren für verschiedene Einsatzgebiete, zum Beispiel das Fördern der Stäube, das Trocknen in Band- oder Durchlaufprozessen oder das Legen und Verdichten von Vliesen. Abgerundet wird das Portfolio durch Befeuchtungssysteme, die für eine ideale Luftfeuchtigkeit im Produktionsprozess sorgen.

Fasern und Produktionsstäube filtern oder Vliese verdichten – mit Systemen von LTG

Ob natürliche Textilien, Nonwovens oder Hightech-Faserherstellung: LTG-Technik sorgt in der Textilbranche für das passende Hallenklima, die Luftströmung zum Legen oder filtert Fasern, um sie für die Entsorgung bzw. das Recycling innerhalb des Prozesses bereitzustellen. Zur Abscheidung von Fasern und Stäuben hat sich unter anderem die Kompaktfiltereinheit CFU bewährt. Sie ist modular aufgebaut und kann aus verschiedenen Filterstufen zusammengestellt werden, zum Beispiel aus dem Vorfilter TVM und dem Feinfilter CompactDrum. Die gefilterten Stoffe lassen sich in Faser- oder Staubkompaktoren sicher und effizient abscheiden. Speziell für größere Luftmengen sind die LTG-Trommelfilter konzipiert. LTG bietet außerdem Radial-, Axial- und Querstromventilatoren für verschiedene Einsatzgebiete, zum Beispiel das Fördern der Stäube, das Trocknen in Band- oder Durchlaufprozessen oder das Legen und Verdichten von Vliesen. Abgerundet wird das Portfolio durch Befeuchtungssysteme, die für eine ideale Luftfeuchtigkeit im Produktionsprozess sorgen.

More information:
ITMA 2019 LTG Aktiengesellschaft
Source:

Press’n’Relations II GmbH

(c) AWOL Media
06.05.2019

The new Vandewiele RCE2+ digital carpet weaving machine at ITMA 2019

A wide range of new technologies will be demonstrated by Vandewiele at the ITMA 2019 textile machinery show in Barcelona from June 20-26, including the latest RCE2+ digital carpet weaving machine.

All Vandewiele technologies are now being equipped for machine-to-machine interaction and learning, as part of the company’s comprehensive TEXconnect programme.

Meeting new industry needs
As a leader in complete carpet manufacturing systems – including BCF extrusion lines, heat setting systems and carpet weaving and tufting machines – Vandewiele has rapidly responded to the evolving needs of the textile industry for smaller and customised production runs, the most challenging of designs, and faster and more sustainable manufacturing.

A wide range of new technologies will be demonstrated by Vandewiele at the ITMA 2019 textile machinery show in Barcelona from June 20-26, including the latest RCE2+ digital carpet weaving machine.

All Vandewiele technologies are now being equipped for machine-to-machine interaction and learning, as part of the company’s comprehensive TEXconnect programme.

Meeting new industry needs
As a leader in complete carpet manufacturing systems – including BCF extrusion lines, heat setting systems and carpet weaving and tufting machines – Vandewiele has rapidly responded to the evolving needs of the textile industry for smaller and customised production runs, the most challenging of designs, and faster and more sustainable manufacturing.

The company’s sensors, software programmes and servers have become increasingly sophisticated as part of the TEXconnect program, and the real-time data from different machines – across connected manufacturing sites and across different countries and even continents – can be collected and shared. Digital models of both machines and production processes can be created and analysed for the optimisation of production settings, to vastly improve scheduling and planning and also make considerable savings in raw materials and energy consumption.

Virtual and remote control now allows for the Big Data analysis that is propelling the industry forward and will pave the way for AI applications. For carpet manufacturers, all of this is leading to the creation of truly Smart Factories.

RCE2 carpet weaving
The new RCE2+ Rug and Carpet Expert weaving machine is a truly digital workhorse, with all yarns continuously controlled and measured and the difficult bobbin changes of the past completely eliminated. This is as a result of Vandewiele’s latest Fast Creel, with the feed and tension of each pile yarn controlled by individual servomotors.

The pile yarns are now fed directly into the machine without having to pass pile-stop motions, to both increase efficiency and eliminate any waste yarns, while achieving previously unreachable industrial speeds.

The filling enters the machine smoothly via the latest IRO X3 winders, heavy duty filling brakes with multi lamellas, an active yarn recuperator and a high speed weft mixer, where again, all tensions are set electronically. Vandewiele’s servo-driven heddle frames (Smart Frames) are meanwhile already well proven in the industry.

TEXconnect further provides readily-available data on all yarn consumption, tension and threading, and then will supply the predictive maintenance that is paving the way to self-learning carpet weaving machines.

All of this would be unnecessary, if it didn’t result in allowing manufacturers to make the highest quality carpets at the most economic prices ever, with savings on the highest-bulk pile yarns from the Vandewiele extrusion lines, reduced waste yarns in the creel and industrial production speeds that have never before been attained.

 

More information:
TEXconnect
Source:

AWOL Media

(c) imogo
02.05.2019

A proposition for pioneers at ITMA

imogo is a new Swedish company formed by a team with long experience in textile processing technology. It is now boldly aiming to change the face of the textile manufacturing industry with its new Dye-Max spray dyeing technology, to be introduced to the market at ITMA 2019 in Barcelona.

While still at the prototype stage, and with a first full-scale line currently under construction and due to be demonstrated this Autumn before delivery, the DyeMax nevertheless promises to slash the use of fresh water, waste water, energy and chemicals by as much as 90% compared to conventional jet dyeing systems.

Spray cassettes
Its application unit consists of a closed chamber containing a series of spray cassettes with precision nozzles for accurate and consistent coverage, in combination with the patented imogo pro speed valve that controls the volume to be applied. The chamber is equipped with an exhaust system and droplet separator to ensure that the environment around the unit is free from particles.

imogo is a new Swedish company formed by a team with long experience in textile processing technology. It is now boldly aiming to change the face of the textile manufacturing industry with its new Dye-Max spray dyeing technology, to be introduced to the market at ITMA 2019 in Barcelona.

While still at the prototype stage, and with a first full-scale line currently under construction and due to be demonstrated this Autumn before delivery, the DyeMax nevertheless promises to slash the use of fresh water, waste water, energy and chemicals by as much as 90% compared to conventional jet dyeing systems.

Spray cassettes
Its application unit consists of a closed chamber containing a series of spray cassettes with precision nozzles for accurate and consistent coverage, in combination with the patented imogo pro speed valve that controls the volume to be applied. The chamber is equipped with an exhaust system and droplet separator to ensure that the environment around the unit is free from particles.

“The spray cassettes are a key part in the Dye-Max line,” explains Imogo’s founding partner Per Stenflo. “There is one set of spray cassettes for each of the three separate dye dispersion feed lines and they can be easily exchanged without the need for tools in less than a minute. This allows for extremely fast changeovers between different colours without the need for cleaning. And because the spray cassettes are removable, all maintenance can be performed off line. 
After applying the dye dispersion the fabric is rolled onto a shaft and moved to the autoclave for deep dye fixation via heat and pressure.”

The savings in treatment water the Dye-Max achieves are due to the extremely low liquor ratio of 0.5 litres per kilo of fabric Stenflo adds. 

“At the same time, the low liquor ratio and the spray process require considerably less auxiliary chemistry to start with, and all of it is used in the process, which also greatly reduces the production of waste water, with only 20 litres being required for wash at changeovers. The low liquid content in the fabric meanwhile minimises the energy needed for fixation.”

The Dye-Max has a working speed of up to 50m/min with the practical speed determined by the fabric weight and application volume. 
 

More information:
imogo
Source:

imogo