Aus der Branche

Zurücksetzen
4 Ergebnisse
28.07.2023

RadiciGroup: Bibs made from recyclable materials for UCI Cycling World Championships

On the occasion of the 2023 UCI Cycling World Championships, the Union Cycliste Internationale chose Santini to make the bibs from recyclable materials. The UCI's partner brought together a pool of companies, all in the Bergamo area (Italy): RadiciGroup, Sitip, EFI Reggiani and Acerbis.

In 2022, the Union Cycliste Internationale released the UCI Climate Action Charter, which lays out an action plan to advance the environmental sustainability of the sport with a specific principle to reduce waste and accelerate the transition to a circular economy. This year, the UCI Cycling World Championships, which will be held from 3 to 13 August, are bringing together most of the cycling disciplines in a single location: Glasgow and across Scotland.

On the occasion of the 2023 UCI Cycling World Championships, the Union Cycliste Internationale chose Santini to make the bibs from recyclable materials. The UCI's partner brought together a pool of companies, all in the Bergamo area (Italy): RadiciGroup, Sitip, EFI Reggiani and Acerbis.

In 2022, the Union Cycliste Internationale released the UCI Climate Action Charter, which lays out an action plan to advance the environmental sustainability of the sport with a specific principle to reduce waste and accelerate the transition to a circular economy. This year, the UCI Cycling World Championships, which will be held from 3 to 13 August, are bringing together most of the cycling disciplines in a single location: Glasgow and across Scotland.

To mark the occasion, the UCI turned to its Official Partner, Santini, to make the bibs that the staff (judges, volunteers, commissaires etc.) and accredited photographers wear throughout the event. The bibs are "eco-designed", which means they are specifically created to have a second life after use. Once the event is over, the bibs could be collected and sent to RadiciGroup and transformed into new material, to be then processed by Acerbis to create X-Elite handguards for mountain bikes. This project is a concrete example of the circular economy at work, allowing 100% of the materials used to be recovered.

To optimise the production cycle of the bibs for the 2023 UCI Cycling World Championships, the products must be eco-friendly from the very first phase. The fabrics were therefore made from Italian nylon yarn produced by RadiciGroup. The choice of nylon – an infinitely recyclable thermoplastic material – is intertwined with UCI's sustainability goals for "limited-use" garments: RadiciGroup was able to channel its know-how and expertise in the field of chemistry to create "circular" bibs, working alongside the other partners. As the innovative yarn selected by RadiciGroup allows for easy and high-quality printing, the fabric is also customisable. The yarn is then provided to Sitip to create the "ARAS NG" warp-knitted fabric (95 g/100 m2): a recyclable single-fibre material made from 100% polyamide. The resulting fabric is the first nylon of its kind, designed to meet the transfer printing needs of the third project partner, EFI Reggiani, as well as the recyclability standards requested by RadiciGroup. The choice of fabric was born from extensive applied research, in which EFI Reggiani tested a wide range of fabrics to find the best colour results and the best resistance to rubbing and perspiration, which is vital for the bibs' intended use. In addition to using the new GOTS-certified EFI Reggiani IRIS Plus water-based inks, EFI Reggiani opted for a printing solution on transfer paper that does not consume water and requires a minimal amount of energy per square metre. Finally, the white fabric from Sitip and the transfer paper printed by EFI Reggiani arrived at Santini, who were responsible for transferring all the graphics for the 2023 UCI Cycling World Championships bibs from the paper onto the fabric. Santini also took care to assemble the garments using only thread and components made from nylon or chemically similar materials, allowing the bibs to enter the recycling process at the end of their lives without any further processing.                   

Quelle:

RadiciGroup

Foto: EFI Reggiani
27.07.2022

EFI Reggiani: Grundsteinlegung für neuen Textilcampus

EFI™ Reggiani, der Unternehmensbereich für industriellen Textildruck des Drucktechnologieunternehmens Electronics For Imaging, Inc. (EFI), hat den Grundstein für einen neuen Textilcampus gelegt. Der neue 20.000 Quadratmeter große Campus im italienischen Comun Nuovo, Bergamo, soll bis Mitte des Jahres 2023 fertiggestellt sein.

EFI™ Reggiani, der Unternehmensbereich für industriellen Textildruck des Drucktechnologieunternehmens Electronics For Imaging, Inc. (EFI), hat den Grundstein für einen neuen Textilcampus gelegt. Der neue 20.000 Quadratmeter große Campus im italienischen Comun Nuovo, Bergamo, soll bis Mitte des Jahres 2023 fertiggestellt sein.

Die neue Anlage wurde unter Berücksichtigung der ökologischen Nachhaltigkeit und des Wohlbefindens der Mitarbeiter entworfen: die Installation von 400 Kilowatt-Solarzellen ist geplant. Diese sollen 60 % des gesamten Energiebedarfs der Einrichtung decken. Zudem soll das Gebäude von einer umfassenden Isolierung profitieren, um Heiz- und Kühlkosten zu senken. Zahlreiche Oberlichter sorgen im Gebäude für eine bessere natürliche Beleuchtung und verringern so den Einsatz von künstlichem Licht. Bei der Planung wurde den Grünflächen auf dem Campus Priorität eingeräumt. Sie werden ca. 20 % der Gesamtfläche ausmachen.
 
Das 3.000 Quadratmeter große Democenter in der neuen Anlage ist fast doppelt so groß wie das derzeitige EFI Reggiani-Democenter im italienischen Grassobbio. Es dient als Hightech-Ausstellungsfläche für die EFI Reggiani Drucker sowie für die Produkte von Mezzera zur Vor- und Nachbehandlung und für Produkte von Jaeggli zur Garnbehandlung. Im Democenter wird auch das vor Kurzem von EFI Reggiani erworbene Portfolio von Inèdit Raster Image Processing (RIP)- und Workflow-Softwarelösungen vorgestellt werden.

Weitere Informationen:
EFI Reggiani EFI
Quelle:

EFI Reggiani

23.06.2022

EFI präsentiert umweltfreundlichen Pigmenttextildrucker

Auf der FESPA Global Print Expo präsentierte Electronics For Imaging Lösungen für Werbetechnik und den industriellen Textildruck. Die neue EFI™ Reggiani ecoTERRA Pigmentlösung, die dort erstmals vorgestellt wurde, ist eine integrierte Lösung für einen optimierten, umweltfreundlicheren Textildruck.

Auf der FESPA Global Print Expo präsentierte Electronics For Imaging Lösungen für Werbetechnik und den industriellen Textildruck. Die neue EFI™ Reggiani ecoTERRA Pigmentlösung, die dort erstmals vorgestellt wurde, ist eine integrierte Lösung für einen optimierten, umweltfreundlicheren Textildruck.

Nachhaltiger Textildirektdruck
Der EFI Reggiani ecoTERRA wird im Laufe des Jahres 2022 erhältlich sein und ist eine All-in-One-Lösung für wasserbasierten Pigmentdruck, der für die Vor- und Nachbehandlung keine weitere Zusatzausrüstung benötigt. Seine zum Patent angemeldete Technologie reduziert den Energie- und Wasserverbrauch insgesamt drastisch, um so den Textildirektdruck noch nachhaltiger zu gestalten.
 
Nutzer profitieren von den hervorragenden Nass- und Trockenechtheitseigenschaften, der Detailschärfe und der Haltbarkeit des ecoTERRA. Gleichzeitig wartet das Gerät bei reduzierten Wartungskosten mit einer längeren Lebensdauer der Druckköpfe auf.
 
Die neue Auswahl an ecoTERRA Tinten umfasst 7 Farben – Cyan, Magenta, Gelb, Schwarz, Blau, Rot und Grün – für einen erweiterten Farbraum. Der EFI Reggiani ecoTERRA verfügt zudem über eine neue und verbesserte Einheit für die Polymerisierung und Veredelung, wodurch dem Stoff eine weichere Haptik verliehen wird – so entsteht ein Produkt, das auch den strengsten Auflagen der Textilindustrie gerecht wird.

Quelle:

EFI GmbH

13.10.2021

Launch of EFI Reggiani TERRA Silver

  • EFI Reggiani TERRA Silver Makes Debut at Fespa Global Print Expo 2021 for a Short, Smart and Green Process
  • The new, industrial, entry-level EFI™ Reggiani TERRA Silver textile printer from Electronics For Imaging, Inc. is making its debut at the Fespa Global Print Expo 2021 tradeshow, 12-15 October at RAI Amsterdam.
  • The EFI Reggiani TERRA Silver uses unique TERRA pigment ink for high-quality, highly sustainable direct-to-textile printing without steaming or washing.       

“This is one of the first trade shows to return after the pandemic, and we are very excited to again meet customers in person and showcase an innovative offering that delivers superior printing results while using less time, water and energy,” said EFI Reggiani Vice President and General Manager Adele Genoni. “We are introducing this advanced EFI Reggiani TERRA Silver solution to the many print service providers at Fespa, presenting them with an ideal path to enter the industrial textile segment with a short, smart and green production process.”

  • EFI Reggiani TERRA Silver Makes Debut at Fespa Global Print Expo 2021 for a Short, Smart and Green Process
  • The new, industrial, entry-level EFI™ Reggiani TERRA Silver textile printer from Electronics For Imaging, Inc. is making its debut at the Fespa Global Print Expo 2021 tradeshow, 12-15 October at RAI Amsterdam.
  • The EFI Reggiani TERRA Silver uses unique TERRA pigment ink for high-quality, highly sustainable direct-to-textile printing without steaming or washing.       

“This is one of the first trade shows to return after the pandemic, and we are very excited to again meet customers in person and showcase an innovative offering that delivers superior printing results while using less time, water and energy,” said EFI Reggiani Vice President and General Manager Adele Genoni. “We are introducing this advanced EFI Reggiani TERRA Silver solution to the many print service providers at Fespa, presenting them with an ideal path to enter the industrial textile segment with a short, smart and green production process.”

The new-version TERRA Silver printer is part of EFI’s complete TERRA line-up of pigment ink printer solutions. It is a 180-cm wide printer that can print up to 190 sqm per hour with eight dual-channel printheads. The printer also features:

•    A new recirculating ink system for superior reliability and minimum maintenance
•    Several printing modes to ensure maximum flexibility in terms of design capability
•    New, real-time image processing that eliminates time spent in image pre-calculations
•    A user friendly, intuitive interface
•    A more-efficient polymerisation process that takes place as printed textile goes through the printer’s on-board dryer.

In Fespa stand 1-G71, attendees can see the EFI Reggiani TERRA Silver print smoothly and precisely on knitted and woven fabrics. The printer’s quality is evident in its high-uniformity printing modes, and it delivers numerous features that enhance the production process, including an accurate WYSIWYG interface and flexible queue management.
 
EFI Reggiani is also a leading developer of textile inks. The EFI Reggiani TERRA pigment inks used on the Silver model deliver excellent wet and dry fastness properties and remarkable sharpness in detail. Designed to leverage EFI Reggiani digital printers’ market-proven industrial performance capabilities, these eco-friendly, water-based inks provide an extraordinary level of print durability and yield longer print head life with reduced maintenance costs. The high-performance digital pigment inks also use an innovative binder technology for fast, sustainable, and cost-competitive industrial textile printing on the widest range of fabrics. Users also gain superior print definition and colour intensity.
 
This year, EFI Reggiani celebrates 75 years of heritage and innovation in the textile world. Always committed to deliver to the market new cutting-edge technologies, EFI Reggiani has world-class products offering boosted uptime and reliability, high performance throughput, and remarkable printing uniformity and accuracy – all while helping customers increase the sustainability of their textile manufacturing activities. Green EFI Reggiani processes give users fast, complete and sustainable solutions across a broad range of textile applications.
 
In this 75th anniversary year, EFI Reggiani has also launched several other ground-breaking solutions, such as EFI Reggiani HYPER, the fastest scanning digital printer on the market, and the EFI Reggiani BLAZE, an industrial entry-level, easy-to-use printer designed to give new textile companies the opportunity to adopt digital inkjet production with a compact solution to blaze a successful path into the industry.

Quelle:

Electronics For Imaging, Inc.