Aus der Branche

Zurücksetzen
3 Ergebnisse
Textil erobert die Luft – ZiTex NRW und Lufthansa Technik (c) ZiTex-Textil & Mode NRW
Textil erobert die Luft – ZiTex NRW und Lufthansa Technik
12.06.2018

Textil erobert die Luft – ZiTex NRW und Lufthansa Technik

Die „ZiTex-Textil & Mode NRW“ hatte am 12. Juni zu einem Pressetermin Düsseldorfer Flughafen eingeladen. Unter dem Motto ‚Textil erobert die Luft‘ eröffnete Detlef Braun, Leiter der ZiTex mit einem Brancheneinblick die Veranstaltung. Nach zwei informativen Vorträgen der Unternehmen ANKER und SAERTEX gab es die Gelegenheit in der Lufthansawerft die Anwendung der technischen Textilien in zwei Maschinen vom Typ A330 (Langstrecke) und A320 aus der Nähe zu begutachten.

Die „ZiTex-Textil & Mode NRW“ hatte am 12. Juni zu einem Pressetermin Düsseldorfer Flughafen eingeladen. Unter dem Motto ‚Textil erobert die Luft‘ eröffnete Detlef Braun, Leiter der ZiTex mit einem Brancheneinblick die Veranstaltung. Nach zwei informativen Vorträgen der Unternehmen ANKER und SAERTEX gab es die Gelegenheit in der Lufthansawerft die Anwendung der technischen Textilien in zwei Maschinen vom Typ A330 (Langstrecke) und A320 aus der Nähe zu begutachten.

Hightech-Textilien zum Anfassen
Bereits der erste Blick in die Wartungshalle des Hangar 7 sorgte für großes Staunen: Die imposante Lufthansa Maschine des Typus A330, die fast täglich von Düsseldorf nach New York fliegt, steht dienstags zu Wartungsarbeiten im Hangar und bot die perfekte Kulisse, sich die Hightech-Textilien einmal aus der Nähe anzuschauen. Das war sowohl für die Veranstalter als auch die Pressevertreter eine ganz neue Erfahrung. „Ich freue mich sehr, dass wir mit dieser Veranstaltung die innovative Textilindustrie so informativ, praxisnah und erlebnisreich präsentieren konnten“, sagt Detlef Braun begeistert: „Veranstaltungen wie diese tragen dazu bei, den Hightech-Charakter der Branche nachhaltig zu verdeutlichen. Textil ist Zukunft! Dies wurde am Beispiel des Flugzeugs heute mehr als deutlich.“

Ruhig & Robust – Airline Teppichböden
Für das Unternehmen ANKER, traditionsreicher Webteppichboden-Spezialist mit Sitz im rheinischen Düren, referierte Alexander von Fuchs-Nordhoff, Sales Director, über den Einsatz der Teppichböden in Flugzeugen. Zum 50. Jubiläum in diesem Jahr der ANKER Teppiche in der Luftfahrt passte das Event ganz besonders, wurde der erste ANKER Airline Teppich 1968 in einer Lufthansa Maschine verlegt. Dabei gibt es die unterschiedlichsten Varianten der Material-Beschaffung und -Verarbeitung sowie Anbringung der Teppiche. Besonders innovativ: der leichteste Teppich in einem Flugzeug überhaupt, der mit 800 Gramm pro Quadratmeter um die Hälfte leichter ist als die herkömmlichen Varianten und damit deutliche Kerosin-Einsparungen ermöglicht. Durch die Zusammenarbeit mit international renommierten Architekten und Innenarchitekten liegen ANKER Teppichböden weltweit sowohl in Flugzeugen als auch in unzähligen Bürogebäuden, Hotels und öffentlichen Gebäuden. Neben der Kreativität setzt ANKER branchenweit Maßstäbe für Nachhaltigkeit und Innovation.

Stabil & Energiesparend – Tragflächen & Strukturbauteile
Steven Bakker, Global Director Business Unit New Products & New Markets von SAERTEX, einem Familienunternehmen, das Weltmarktführer in der Herstellung von Carbongelegen ist, präsentierte deren unterschiedliche Einsatzbereiche im Flugzeug: in den Tragflächen, der Druckkalotte sowie Stringerelemente und Verkleidungsteile und erläuterte, welchen besonderen Gegebenheiten die Materialien standhalten müssen. Insbesondere die Luftfahrt setzt auf solche Composites, die durch Verstärkungsmaterialien aus Glas-, Carbon- und Aramid-Fasern an Leichtigkeit, Stabilität und Korrosionsbeständigkeit gewinnen. Als Weltneuheit konnte Saertex im März dieses Jahres auf der JEC WORLD 2018 in Paris, der Fachmesse für Verbundwerkstoffe, ein Verfahren vorstellen, das Carbon Gelege automatisch, kontinuierlich und ohne Zerstörung auf Schäden, Lücken und Krümmungen prüft. Airbus setzt dieses Verfahren zur Materialprüfung bereits in Serie ein.

Einblicke in die Praxis vermittelte die Lufthansa Technik
Im Hangar Nr. 7 der Lufthansa Technik erfuhren die Presseteilnehmer viele Details von Wartungsleiter, Sascha Bongartz. Die Lufthansa Technik Gruppe ist ein Geschäftsfeld der Deutschen Lufthansa AG rund um die Themen Wartung und Überholung von Flugzeugen, Geräteversorgung, Triebwerke, Fahrwerke und VIP-Services. Mit 50 Standorten auf der ganzen Welt und 26.700 Mitarbeiterinnen und Mitarbeitern – davon rund 11.000 in Deutschland – ist die Lufthansa Weltmarktführer im Bereich luftfahrttechnischer Dienstleistungen.

Quelle:

ZiTex-Textil & Mode NRW

JEC World 2018 (c)AGENCE APOCOPE
Crowded aisle of JEC World 2018
08.03.2018

JEC World 2018: Composites Industry in Paris

  • JEC World 2018, closes its doors on March 8 with a record increase in attendance resuming 3 days of vibrant networking and knowledge sharing.

The event confirms its leading position of JEC Group as number one organization for the promotion and development of the composites industry. Indeed the show welcomed more than 1,300 exhibitors from every continents and counted 42,445 professional visits from 115 countries. “The ability of JEC Group to gather the whole composites Industry under one roof over 3 days lies in the fact that we always initiate new precursory programs to the service of composites professionals.” says Ms. Frédérique Mutel, JEC Group President & CEO. “This year we initiated new programs, for instance the Composite Challenge allowing 10 PhD students to pitch their thesis in front of the industry, thus facilitating connections between students and industrialists. In the same spirit, we increased in power our Start Up Booster and Innovation Award Programs to accelerate relations between young or innovative companies with investors or established enterprises.

  • JEC World 2018, closes its doors on March 8 with a record increase in attendance resuming 3 days of vibrant networking and knowledge sharing.

The event confirms its leading position of JEC Group as number one organization for the promotion and development of the composites industry. Indeed the show welcomed more than 1,300 exhibitors from every continents and counted 42,445 professional visits from 115 countries. “The ability of JEC Group to gather the whole composites Industry under one roof over 3 days lies in the fact that we always initiate new precursory programs to the service of composites professionals.” says Ms. Frédérique Mutel, JEC Group President & CEO. “This year we initiated new programs, for instance the Composite Challenge allowing 10 PhD students to pitch their thesis in front of the industry, thus facilitating connections between students and industrialists. In the same spirit, we increased in power our Start Up Booster and Innovation Award Programs to accelerate relations between young or innovative companies with investors or established enterprises. We also introduced one new planet called “Make it Real” along with the Aero, Auto and Construction planets. In this planet, we could discover astonishing futuristic products for example the Aeromobil, a flying car that would revolutionize urban transportation in the near future,“ she adds. “We launched our new Book on Natural Fibers: Flax and Hemp. We had strong communications on Composites Environmental Input and Recycling.”

The event was the first event to promote and host the new “French Fab”, a French government initiative to internationally promote the French Industry and Manufacture. Also, JEC World welcomed the French Secretary of State to the Minister of Economy and Finance Ms. Delphine Gény-Stephann, visit that demonstrates the growing role of composites in the industry.

Inspiring Keynotes to foster composites disruption

Dirk Ahlborn,CEO of Hyperloop opened the Startup Booster ceremony by supporting the spirit of ingenuity in the Industry. Dayton Horvath, industry expert and consultant in additive manufacturing presented his vision of how to apply artificial intelligence to composite Materials and Manufacturing. Finally, Yves Rossy, the “jetman” using the latest carbon-fiber wings for flight introduced the JEC Innovation awards ceremony, motivating the audience to pursue their dreams and explaining how composites could made his dreams come true.

The "Public Choice” Awards Winners

A first at the show this year was the introduction of the public votes to elect their favorite projects among two JEC programs promoting innovation. “The goal to create the “public choice awards” was to involve and embark our community to make their innovation loud. Our vision at JEC is to demonstrate and to make understand towards a broader scope the vast range of possibilities that composite materials offer.”
comments Ms. Anne-Manuèle Hébert, Director for JEC World and European Events for JEC Group.

Public Choice Award for Startup  Booster: Inca-Fiber (Germany) with 62.36% of the 2,221 votes
Public Choice Award for JEC Innovation Awards: Infusion technology for an aircraft wing by AeroComposit JSC (Russia) gaining 20.96% of the 4,126 votes.

Quelle:

AGENCE APOCOPE

20th anniversary of the JEC Innovation Awards (c) GROUPE JEC - Thierry-Alain TRUONG
07.03.2018

20th anniversary of the JEC Innovation Awards

  • JEC Group pays tribute to the winners at JEC World 2018

The 2018 session of JEC World, the reference trade show organized by JEC Group, is in full swing and the focus is on innovation!
The JEC Innovation Awards ceremony, which took place on the Agora stage on Wednesday, March 7 at 5 pm, opened with a presentation by Yves Rossy, aircraft pilot and inventor of the first jet-powered wingpack. Then the jury revealed the names of the composite champions up for a JEC Innovation Award. Eleven winning innovations were chosen, out of the thirty finalists that had been previously selected from more than 100 applications from all over the world.

  • JEC Group pays tribute to the winners at JEC World 2018

The 2018 session of JEC World, the reference trade show organized by JEC Group, is in full swing and the focus is on innovation!
The JEC Innovation Awards ceremony, which took place on the Agora stage on Wednesday, March 7 at 5 pm, opened with a presentation by Yves Rossy, aircraft pilot and inventor of the first jet-powered wingpack. Then the jury revealed the names of the composite champions up for a JEC Innovation Award. Eleven winning innovations were chosen, out of the thirty finalists that had been previously selected from more than 100 applications from all over the world.

“JEC Group supports innovation. In 1998, it created the first award dedicated to composites, as a way to promote and reward the sector’s champions. Thanks to the work of JEC Group’s teams, the program has become an international benchmark. Each year, we receive more than a hundred applications from all over the world. Selection is now based on criteria like the level of involvement of the innovation’s partners in the value chain, the technical nature of the innovation, or its commercial applications,” explains JEC Group President & CEO Frédérique Mutel.
A new feature this year is that the jury revealed the winners during the ceremony, and the public could choose their favorite innovation before, during, and after the ceremony. So there is still time to vote! Votes are opened until Thursday March 8th, 5pm http://innovationawards.jec-world.events
Did you miss the ceremony?

11 AWARD WINNERS:
AEROSPACE APPLICATION

Winner:
AeroComposit, JSC (Russia) and its partner Solvay (United Kingdom)

  • Infusion technology for an aircraft wing

The use of infusion technology to manufacture primary structural components for an aircraft wing. The technology makes it possible to create extra-long, integrated composite structures with complex aerodynamic shapes.

AEROSPACE PROCESS 
2 tied winners!
Winner: Airbus (Germany) and its partners, BMW Group (Germany), Technical University of Munich (TUM) (Germany), Neue Materialien Bayreuth GmbH (Germany), Werkzeugbau Siegfried Hofmann GmbH (Germany), BASF SE (Germany), Foldcore GmbH (Germany), Neenah Filtration (Germany) and SGL Carbon GmbH (Germany)

  • Complex structural applications for MAI sandwich technology

Cost-effective production of a complex 2.5D structure made of thermoplastic composite sandwich, with very short cycle times: under 5 minutes for aerospace materials and 2.5 minutes for automotive materials.

Winner: M. Torres Diseños Industriales SAU (Spain)
Moldless process to manufacture one-piece parts
A new manufacturing process for oversized one-piece reinforced composite structures, without requiring the use of complete molds.

AUTOMOTIVE APPLICATION
Winner: Ford Werke GmbH (Germany) and its partners, Gestamp (United Kingdom), GRM Consulting (United Kingdom) and University of Warwick (United Kingdom)

  • Lightweight composite automotive suspension part

Structural suspension part made of lightweight composite, using a brand-new patented process for prepreg/SMC/steel overmolding that was designed using a new computer-aided engineering (CAE) technology.

AUTOMOTIVE PROCESS
Winner: Audi AG (Germany) and its partners, Voith Composites GmbH & Co. KG (Germany), Dow Automotive (Switzerland), and Zoltek Corp. (United States)

  • Series production of a rear panel module made of carbon composite

For the first time, the potential of carbon fiber reinforced plastics (CFRP) is used to full advantage in series production with a new rear panel module and cost-effective production technologies.

CONSTRUCTION & INFRASTRUCTURE
Winner: Komatsu Seiren Co., Ltd. (Japan) and its partners, Kanazawa Institute of Technology (Japan) and Nagase ChemteX Corporation (Japan)

  • Cabkoma cable made of CFRTP

Komatsu Seiren has developed a cable made of molded carbon fiber reinforced thermoplastic (CFRTP), using a very cost-effective process that consists in polymerizing a thermoplastic epoxy resin in situ.

MARINE
Winner: Uljanik JSC (Croatia)

  • Composite cargo decks for a vehicle carrier

On the SIEM Cicero, a vehicle carrier with a capacity of 7,000 vehicles, glass-fiber reinforced composites are used for a number of the structures for the cargo decks, thereby considerably reducing the ship’s weight, fuel consumption and CO2 emissions.

RAILWAY
Winner: ELG Carbon Fibre Ltd. (United Kingdom) and its partners, Alstom Transport (United Kingdom), Magma Structures (United Kingdom), the University of Birmingham (United Kingdom), and the University of Huddersfield (United Kingdom)

  • A bogie frame made of optimized lightweight carbon fiber

This project has developed the very first carbon-fiber bogie frame that uses a recycled material, making it possible to overcome the obstacles to a commercial adoption of this type of structure.

SPORTS & LEISURE
Winner: BMW Group (Germany) and its partners EDAG Engineering GmbH (Germany), KraussMaffei Technologies GmbH (Germany), Chr. Karl Siebenwurst GmbH & Co. KG (Germany), TUM-LCC (Germany), Automation W + R GmbH (Germany), and FHG-IGCV (Germany)

  • A modular construction system for the rear swing arm suspension of a motorcycle

A modular system to produce a complex-shape swing arm suspension reinforced with carbon fiber. The system can adjust the mechanical properties on a case-by-case basis, for a competitive cost and weight compared to metal solutions.

SMART CITIES
Winner: MC Materiales Compuestos (Argentina) and its partners, Plaquimet (Argentina), Purcom (Brazil), IS Groupe - Composite Integrity (France), and G12 Innovation (Brazil)

  • The Wet Core Pod composite housing module

The Wet Core Pod is a composite housing module with an industrialization potential that can facilitate the most complex, costly and difficult step in a construction project.

SUSTAINABLE DEVELOPMENT
Winner: Cetim-Cermat (France) and its partner, CETIM (France)

  • “3-in-1” line for producing recycled composites

A modular line that uses an innovative thermomechanical process to make large panels from recycled composites or plastics. The panels are then thermoformed into parts.
 

Weitere Informationen:
JEC Innovation Awards JEC World 2018
Quelle:

Dorothée David & Marion RISCH, Agence Apocope