Aus der Branche

Zurücksetzen
10 Ergebnisse
AkzoNobel: Expansion of powder coatings plant (c) AkzoNobel
14.02.2024

AkzoNobel: Expansion of powder coatings plant in Italy

A major capacity expansion has been completed at AkzoNobel’s Powder Coatings site in Como, Italy, which will help secure supply to customers across Europe, Middle East and Africa (EMEA).

Four new manufacturing lines are now operational following the €21 million project – two of them dedicated to automotive primers and two to architectural coatings. New bonding equipment lines have also been added, ensuring that the products meet and exceed industry standards.

The extra capacity in Como has been installed in a renovated building where powder coatings were originally made – a sustainable reuse of an existing part of the site, which was established in 1992. The new lines also use recycled energy and are focused on meeting the highest standards in sustainable production, supporting the company’s ambition to reduce its carbon emissions by 50% by 2030.

AkzoNobel’s Como site is the company’s largest plant for producing powder coatings. It supplies products for market segments, such as home appliances, architecture, automotive, furniture and more.

A major capacity expansion has been completed at AkzoNobel’s Powder Coatings site in Como, Italy, which will help secure supply to customers across Europe, Middle East and Africa (EMEA).

Four new manufacturing lines are now operational following the €21 million project – two of them dedicated to automotive primers and two to architectural coatings. New bonding equipment lines have also been added, ensuring that the products meet and exceed industry standards.

The extra capacity in Como has been installed in a renovated building where powder coatings were originally made – a sustainable reuse of an existing part of the site, which was established in 1992. The new lines also use recycled energy and are focused on meeting the highest standards in sustainable production, supporting the company’s ambition to reduce its carbon emissions by 50% by 2030.

AkzoNobel’s Como site is the company’s largest plant for producing powder coatings. It supplies products for market segments, such as home appliances, architecture, automotive, furniture and more.

Weitere Informationen:
AkzoNobel Coatings furniture Automotive
Quelle:

AkzoNobel

KARL MAYER: Launch der neuen Trikotmaschine TM 4 EL (c) KARL MAYER GROUP
24.01.2024

KARL MAYER: Launch der neuen Trikotmaschine TM 4 EL

Im Bereich der vierbarrigen Trikotmaschinen hat KARL MAYER Ende vergangenen Jahres mit der TM 4 EL ein neues, hoch flexibles Modell für das Midrange-Segment gelauncht. Die Trikotmaschine fertigt Stoffe für Möbelbezüge, das Automobil-Interieur und Oberbekleidung ebenso wie Sportswear-Artikel und Heimtextilien.

Ausgestattet mit der CFK-Technologie von KARL MAYER ist die TM 4 EL um bis zu 30 % schneller als die bisherige vierbarrige Trikotmaschine für den Commodity-Bereich.

Im Bereich der vierbarrigen Trikotmaschinen hat KARL MAYER Ende vergangenen Jahres mit der TM 4 EL ein neues, hoch flexibles Modell für das Midrange-Segment gelauncht. Die Trikotmaschine fertigt Stoffe für Möbelbezüge, das Automobil-Interieur und Oberbekleidung ebenso wie Sportswear-Artikel und Heimtextilien.

Ausgestattet mit der CFK-Technologie von KARL MAYER ist die TM 4 EL um bis zu 30 % schneller als die bisherige vierbarrige Trikotmaschine für den Commodity-Bereich.

Die neue Trikotmaschine wird mit den Feinheiten E 28 und E 32 angeboten. Verfügbare Arbeitsbreiten sind 210″ und 280″, eine Arbeitsbreitenerweiterung ist möglich. Weitere Breitenvarianten sind geplant. Highlights der Ausstattung sind u. a. ein integrierter Laser Stop zur frühzeitigen Erkennung von Fadenbrüchen und eine funktionelle LED-Beleuchtung, die Licht auf die Wirkstelle für ein einfaches Handling wirft und ungeplante Maschinenstopps durch eine entsprechende Farbigkeit signalisiert. Die Maschine kann über das k.ey-Device mit der sicheren Cloud von KM.ON vernetzt werden, um die digitalen Lösungen der KARL MAYER GROUP nutzen zu können. Hierzu zählt beispielsweise der webbasierte Legungseditor CORE LITE.

Quelle:

KARL MAYER GROUP

ZwissTex integriert Kornit-Technologie in Produktion Foto: Kornit / ZwissTex
06.09.2023

ZwissTex integriert Kornit-Technologie in Produktion

Das in Deutschland ansässige Unternehmen ZwissTex ist ein Hersteller von Textilien mit über 150 Jahren Erfahrung und entwickelt innovative und nachhaltige Textillösungen für die Automobil- und Bekleidungsindustrie. Das Unternehmen ist auch in Mexiko tätig, um speziell den Automobilsektor in den nordamerikanischen Freihandelsabkommen (NAFTA) zu bedienen. Über OEMs beliefert ZwissTex deutsche Automobilhersteller wie die Volkswagen Auto Group, BMW und Mercedes sowie in ausgewählten Fällen amerikanische Hersteller.

Im Gegensatz zu anderen Kornit-Kunden hatte ZwissTex bisher keine Erfahrung im Drucken eigener Materialien und sah das Produktionssystem Presto MAX S von Kornit als effektive Möglichkeit, ihre Produktfähigkeiten zu erweitern.

Das in Deutschland ansässige Unternehmen ZwissTex ist ein Hersteller von Textilien mit über 150 Jahren Erfahrung und entwickelt innovative und nachhaltige Textillösungen für die Automobil- und Bekleidungsindustrie. Das Unternehmen ist auch in Mexiko tätig, um speziell den Automobilsektor in den nordamerikanischen Freihandelsabkommen (NAFTA) zu bedienen. Über OEMs beliefert ZwissTex deutsche Automobilhersteller wie die Volkswagen Auto Group, BMW und Mercedes sowie in ausgewählten Fällen amerikanische Hersteller.

Im Gegensatz zu anderen Kornit-Kunden hatte ZwissTex bisher keine Erfahrung im Drucken eigener Materialien und sah das Produktionssystem Presto MAX S von Kornit als effektive Möglichkeit, ihre Produktfähigkeiten zu erweitern.

"Unsere Textilien wurden in der Vergangenheit nicht klassisch bedruckt, und wir haben keine klassischen Textilien in der Mode produziert, weshalb wir intern keine Erfahrung im Drucken hatten", sagte Ralph Moldan, Technischer Spezialist bei ZwissTex, während das System in ihrem Betrieb installiert wurde. "Die einzige Option bestand darin, ein System zu finden, das es uns ermöglichen würde, die Bereiche, in denen wir auf dem Markt aktiv sind, einfach und schnell umzusetzen, ohne viel Druckerfahrung zu benötigen."

Ein Vorteil der Integration von Kornit-Technologie in das Produktionsumfeld von ZwissTex besteht darin, dass Tinte nur dort aufgetragen wird, wo sie benötigt und sichtbar ist, anstatt auf die gesamte Oberfläche jedes Materials. Dadurch wird nicht nur der CO2-Fußabdruck des Unternehmens reduziert, sondern auch der Materialabfall minimiert, was zu einem kosteneffizienteren Betrieb führt.

Bevor ZwissTex sich für die Investition in Kornit entschied, führte das Unternehmen eine Reihe von Tests und Beratungen durch, um mögliche Anwendungen für verschiedene Materialien zu bewerten und mit seinen wichtigsten Kunden zusammenzuarbeiten, um sicherzustellen, dass diese Endprodukte ihren strengen Qualitäts- und Haltbarkeitsstandards entsprechen. Dies beinhaltete die Präsentation von mit Kornit dekorierten Mustern auf der Techtextil 2022 Ausstellung in Frankfurt.

Moldan fand heraus, dass die Produktionsmöglichkeiten von Kornit neue Möglichkeiten zur Individualisierung von Innenräumen eröffneten, einem Markt, der weiterhin wächst. Er erwartet, dass diese Technologie neue Chancen mit Kunden eröffnen wird, die sie zuvor nicht erreichen konnten, einschließlich neuer Möglichkeiten in Bereichen wie Wohnmobilen, Fluggesellschaften und Flugzeugausstattern.

Quelle:

Kornit Digital

(c) ANSMANN AG
02.12.2022

Ansmann AG stellt drahtlose Heizfolie vor

Ansmann AG hat eine neuartige, überhitzungssichere Heizfolie auf der COMPAMED 2022 in Düsseldorf vorgestellt. Diese erste drahtlose Heizfolie mit völlig konstanter Wärmeverteilung war, der medizintechnischen Veranstaltung entsprechend, zu einem beheizbaren Rollstuhlpolster verarbeitet. Doch auch eine Vielzahl weiterer Anwendungen sind mit der Kunststofffolie umsetzbar: Beispiele sind beheizbare Fahrradsättel, Smart Clothing, oder sonstige wärmende Flächen und Elemente in Automotive oder E-Mobility Anwendungen vom Autositz bis zur beheizten Lastenradkabine.

Im Unterschied zu bisherigen Heizlösungen kann sie in eine beliebige Form zugeschnitten und auch geknickt oder gefaltet werden. Zudem kann sie aufgrund ihrer Materialeigenschaften nicht überhitzen. Die Wärmeverteilung in der Fläche ist dabei völlig gleichmäßig und dadurch sehr angenehm für den Nutzer.

Jedes Produkt mit bis zu 1×1m großer Fläche in beliebiger Form, kann an eine Niedervolt-Stromversorgung angeschlossen werden und für gleichmäßige Wärme mit einer solchen Heizfolie bestückt werden.

Ansmann AG hat eine neuartige, überhitzungssichere Heizfolie auf der COMPAMED 2022 in Düsseldorf vorgestellt. Diese erste drahtlose Heizfolie mit völlig konstanter Wärmeverteilung war, der medizintechnischen Veranstaltung entsprechend, zu einem beheizbaren Rollstuhlpolster verarbeitet. Doch auch eine Vielzahl weiterer Anwendungen sind mit der Kunststofffolie umsetzbar: Beispiele sind beheizbare Fahrradsättel, Smart Clothing, oder sonstige wärmende Flächen und Elemente in Automotive oder E-Mobility Anwendungen vom Autositz bis zur beheizten Lastenradkabine.

Im Unterschied zu bisherigen Heizlösungen kann sie in eine beliebige Form zugeschnitten und auch geknickt oder gefaltet werden. Zudem kann sie aufgrund ihrer Materialeigenschaften nicht überhitzen. Die Wärmeverteilung in der Fläche ist dabei völlig gleichmäßig und dadurch sehr angenehm für den Nutzer.

Jedes Produkt mit bis zu 1×1m großer Fläche in beliebiger Form, kann an eine Niedervolt-Stromversorgung angeschlossen werden und für gleichmäßige Wärme mit einer solchen Heizfolie bestückt werden.

20.06.2022

Lectra joins Euronext Tech Leaders

Lectra, whose connected industrial equipment and software facilitate the digital transformation and Industry 4.0 transition of fashion, automotive and furniture companies, announces its selection for the new Euronext Tech Leaders stock market index. This brings Lectra into the community of European technology leaders identified by Euronext as innovative and high-growth companies.

The new Euronext Tech Leaders market index, launched on June 7, comprises 100 European technology companies listed on the Euronext markets, which meet various performance and growth criteria. With the launch of this initiative, Euronext aims to offer better visibility and new services to selected European technology leaders.

Lectra, whose connected industrial equipment and software facilitate the digital transformation and Industry 4.0 transition of fashion, automotive and furniture companies, announces its selection for the new Euronext Tech Leaders stock market index. This brings Lectra into the community of European technology leaders identified by Euronext as innovative and high-growth companies.

The new Euronext Tech Leaders market index, launched on June 7, comprises 100 European technology companies listed on the Euronext markets, which meet various performance and growth criteria. With the launch of this initiative, Euronext aims to offer better visibility and new services to selected European technology leaders.

Lectra is one of the 41 French companies that are now members of Euronext Tech Leaders. The company, founded in 1973 on a close relationship with fashion industry players, has also for the last three decades worked globally with automotive equipment and furniture manufacturers. In its three strategic markets, Lectra sells connected equipment that optimizes the cutting processes of fabric, leather and other soft materials used by manufacturers, and markets software and services that streamline their production processes while enabling them to be more agile and make considerable material savings.

In fashion, through the use of market data – made accessible and exploitable by the Internet of Things, the cloud, artificial intelligence and big data – Lectra’s software solutions also enable a better understanding of consumers’ behavior. They therefore facilitate strategic decision-making for brands, manufacturers and distributors at the key steps in the value chain of design, production and distribution. In this industry, the impact of Lectra’s solutions on reducing material consumption is even greater because it takes effect as early as the garment design stage.

Technology and innovation are therefore at the heart of Lectra’s strategy, with the company aiming to become a key player in Industry 4.0 in its strategic markets by 2030.

Quelle:

Lectra

03.02.2022

The 2022 JEC Composites Innovation Awards: Official Finalists line up

Première Vision - Each year, since its creation more than 20 years ago, the JEC Composites Innovation Awards celebrate successful projects and cooperation between players of the composite industry.
The competition has especially shined a light on some 203 companies and 499 partners, awarding them for the excellence of their composite innovations.

After pre-selection of the finalists, one winner is selected in each category:

  • Aerospace – Application
  • Aerospace – Process
  • Automotive & road transportation – surface
  • Automotive & road transportation – structural
  • Building & Civil Engineering
  • Design, Furniture & Home
  • Equipment & Machinery
  • Maritime Transportation & Shipbuilding
  • Sports, Leisure & Recreation
  • Renewable Energy

The international jury representing the entire composites value chain includes:

Première Vision - Each year, since its creation more than 20 years ago, the JEC Composites Innovation Awards celebrate successful projects and cooperation between players of the composite industry.
The competition has especially shined a light on some 203 companies and 499 partners, awarding them for the excellence of their composite innovations.

After pre-selection of the finalists, one winner is selected in each category:

  • Aerospace – Application
  • Aerospace – Process
  • Automotive & road transportation – surface
  • Automotive & road transportation – structural
  • Building & Civil Engineering
  • Design, Furniture & Home
  • Equipment & Machinery
  • Maritime Transportation & Shipbuilding
  • Sports, Leisure & Recreation
  • Renewable Energy

The international jury representing the entire composites value chain includes:

  • Michel COGNET, Chairman of the Board, JEC Group
  • Christophe BINETRUY, Professor of Mechanical Engineering, EC Nantes
  • Kiyoshi UZAWA, Professor/Director, Innovative Composite Center, Kanazawa Institute of Technology
  • Jiming Sung HA, Professor, Hanyang University
  • Brian KRULL, Global Director of Innovation, Magna Exteriors Inc
  • Karl-Heinz FULLER, Manager Future Outside Materials, Mercedes Benz AG
  • Deniz KORKMAZ, CTO, Kordsa Teknik Tekstil AS
  • Henry SHIN, Head of Center, K-CARBON
  • Véronique MICHAUD, Associate Professor/ Director, EPFL – Laboratory for Processing of Advanced Composites
  • Alan BANKS, Lightweight Innovations Manager, Ford Motor Company
  • Enzo CRESCENTI, Technical Authority and Composite Expert, Airbus

Discover the finalists in each category here.

Quelle:

JEC Group

(c) „adVANture“ von - Nadine Tobias, Lara Marschall, 3. Semester Bachelor Transportation Interior Design, Hochschule Reutlingen
Dieses Semester online: die Werkschau der Studierenden des Studiengangs Transportation Interior Design
28.01.2022

Hochschule Reutlingen: Future Mobility Werkschau Winter 2022

Studierende des Studiengangs Transportation Interior Design der Hochschule Reutlingen haben sich ein Semester lang intensiv in Präsenz und mit digitalen Arbeits- und Kollaborationsmethoden mit Fragen zukünftiger Mobilität beschäftigt. Ihre Ergebnisse zum Thema „open space - der Camper der Zukunft“ präsentieren die Studierenden nun live online.

Camping boomt – der Urlaub mit dem Camper ist in und verspricht auch in Pandemiezeiten Flexibilität, Freiheit und Unabhängigkeit. Laut Caravaning Industrie Verband (CIVD) hat sich die Zahl der Neuzulassungen in den vergangen vier Jahren mehr als verdoppelt. Camper sind begehrte Fahrzeuge für unbeschwerte Urlaube. Rein in den Camper und einfach mal schnell aus dem Alltag entfliehen? Das Prinzip ist, nicht erst seit knapp 80.000 Neuzulassungen im Jahr 2021 (CIVD), bekannt und bewährt.

Studierende des Studiengangs Transportation Interior Design haben sich im Wintersemester 2021/2022 im Kooperationsprojekt „open space“ mit der Firma Rocket Camper aus Remshalden intensiv mit neuen, innovativen Nutzungsmöglichkeiten und Konzepten für Wohnmobile und Camper auseinandergesetzt.

Studierende des Studiengangs Transportation Interior Design der Hochschule Reutlingen haben sich ein Semester lang intensiv in Präsenz und mit digitalen Arbeits- und Kollaborationsmethoden mit Fragen zukünftiger Mobilität beschäftigt. Ihre Ergebnisse zum Thema „open space - der Camper der Zukunft“ präsentieren die Studierenden nun live online.

Camping boomt – der Urlaub mit dem Camper ist in und verspricht auch in Pandemiezeiten Flexibilität, Freiheit und Unabhängigkeit. Laut Caravaning Industrie Verband (CIVD) hat sich die Zahl der Neuzulassungen in den vergangen vier Jahren mehr als verdoppelt. Camper sind begehrte Fahrzeuge für unbeschwerte Urlaube. Rein in den Camper und einfach mal schnell aus dem Alltag entfliehen? Das Prinzip ist, nicht erst seit knapp 80.000 Neuzulassungen im Jahr 2021 (CIVD), bekannt und bewährt.

Studierende des Studiengangs Transportation Interior Design haben sich im Wintersemester 2021/2022 im Kooperationsprojekt „open space“ mit der Firma Rocket Camper aus Remshalden intensiv mit neuen, innovativen Nutzungsmöglichkeiten und Konzepten für Wohnmobile und Camper auseinandergesetzt.

Im Mittelpunkt stand dabei die Frage, wie clevere Verwandlungslösungen Räume vergrößern, individuell erlebbar machen und das Alltags- oder Urlaubsleben bereichern und erleichtern können. Gefragt waren Ideen zur Raum-Erweiterung und Strukturierung unter Einsatz von smarten Oberflächen. Basierend auf Analysen aktueller Lifestyle Szenarien ging es für die Studierenden vor allem um die Fragestellung, welche neuen Aufgaben ein solch innovativer Camper übernehmen und damit einen Mehrwert für seinen Nutzer bieten kann.

Ein Camper als mitwachsendes Raumwunder für Patchworkfamilien? Ein Camper mit individuellen Möglichkeiten für Hundebesitzer? Ein Camper als Arbeitsplatz? Ein Camper, der Stress reduziert und das Leben bereichert? Wie kann die Umgebung nach drinnen geholt werden? Smarte Oberflächen, die beim Fokussieren helfen und welches Thema spielt dabei das autonome Fahrzeug?

Die Ergebnisse der Studierenden werden am 04.02.22 online auf der Live-Online-Werkschau und Online-Ausstellung präsentiert. Mehr Informationen finden Sie hier.

Quelle:

Hochschule Reutlingen

27.01.2022

Radici Yarn certified to ISO 50001 Energy Management Systems

Over 400 employees work hard every day to improve the environmental performance of Radici Yarn’s site. Through teamwork and continuous improvement in energy efficiency, Radici Yarn has obtained ISO 50001 Energy Management Systems certification, which attests to the organization’s commitment to contain and progressively reduce energy consumption.

Radici Yarn, one of the companies in the RadiciGroup Advanced Textile Solutions Business Area, is engaged in the production and sale of polyamide 6 polymer, PA6 and PA66 continuous filament and staple yarn, and other synthetic fibres, including products made of recycled or bio-based materials.

All the processes - polymerization and spinning (Villa d'Ogna plant), as well as warping and draw-warping (Ardesio plant) - are run under constant monitoring with the goal of achieving maximum energy efficiency and lower consumption. Both sites are powered by two hydroelectric power plants owned by Geogreen, a RadiciGroup partner and energy supplier. The share of energy consumption from renewable sources and reduced environmental impact (natural gas) sources  is constantly increasing.

Over 400 employees work hard every day to improve the environmental performance of Radici Yarn’s site. Through teamwork and continuous improvement in energy efficiency, Radici Yarn has obtained ISO 50001 Energy Management Systems certification, which attests to the organization’s commitment to contain and progressively reduce energy consumption.

Radici Yarn, one of the companies in the RadiciGroup Advanced Textile Solutions Business Area, is engaged in the production and sale of polyamide 6 polymer, PA6 and PA66 continuous filament and staple yarn, and other synthetic fibres, including products made of recycled or bio-based materials.

All the processes - polymerization and spinning (Villa d'Ogna plant), as well as warping and draw-warping (Ardesio plant) - are run under constant monitoring with the goal of achieving maximum energy efficiency and lower consumption. Both sites are powered by two hydroelectric power plants owned by Geogreen, a RadiciGroup partner and energy supplier. The share of energy consumption from renewable sources and reduced environmental impact (natural gas) sources  is constantly increasing.

The energy issue has always been a priority for Radici Yarn, whose products serve numerous sectors, including automotive, clothing and furnishings.

"Already at the beginning of the 1990s, Radici Yarn started investing in cogeneration, the simultaneous production of electricity and steam,” pointed out Laura Ravasio, energy manager of Radici Yarn SpA. “We have recently started up an advanced trigeneration plant – a highly efficient system that produces not only electricity and steam, but also chilled water for our production processes. One of the first results recorded in 2021 was a 30% reduction in water consumption. Thus, ISO 50001 certification seemed like the next logical step to take in formalizing a long-term approach to energy.”

The ISO 50001 certification, which is voluntary and valid for a period of three years, was added to the ISO 14001 Environmental and ISO 9001 Quality Management system certifications previously achieved by Radici Yarn.

Quelle:

RadiciGroup

(c) Beaulieu International Group
29.04.2019

Beaulieu Fibres International erweitert die Möglichkeiten der Nonwoven-Stoffe auf der Techtextil 2019

Damit wird der Weg für Nadelfilzteppiche und Stoffe aus bis zu 100% recyclingfähigem PP geebnet

  • Hochfeste Fasern für leichte Geotextilien bei reduzierten Systemkosten
  • Maßgeschneiderte haftende Fasern für leichte Kompositwerkstoffe in der Automobilindustrie
  • Neue PET-core-BICO-Fasern für widerstandsfähige, Highloft-Vliesstoffe für den Hygienebereich, die in Sachen Weichheit und Ultraschallschweißen neue Trends bedienen

Beaulieu Fibres International (BFI), der Anbieter weltweiter Lösungen im Bereich Fasern mit Mehrwert, setzt mit seinen Polyolefin- und PET-Core BICO-Fasern neue Standards (Halle 4.2 Stand F19).

Im Rahmen seiner Ausstellung auf der Techtextil 2019 wird BFI Innovationen ins Rampenlicht rücken, die es Produzenten ermöglichen, das Maximum aus ihren Produktionsanlagen herauszuholen und neue Möglichkeiten in Bereichen wie Automotive, Geotextilien, Bodenbeläge, Filtertechnologie, Polstern, Betonverstärkung und Hygiene zu nutzen.

Damit wird der Weg für Nadelfilzteppiche und Stoffe aus bis zu 100% recyclingfähigem PP geebnet

  • Hochfeste Fasern für leichte Geotextilien bei reduzierten Systemkosten
  • Maßgeschneiderte haftende Fasern für leichte Kompositwerkstoffe in der Automobilindustrie
  • Neue PET-core-BICO-Fasern für widerstandsfähige, Highloft-Vliesstoffe für den Hygienebereich, die in Sachen Weichheit und Ultraschallschweißen neue Trends bedienen

Beaulieu Fibres International (BFI), der Anbieter weltweiter Lösungen im Bereich Fasern mit Mehrwert, setzt mit seinen Polyolefin- und PET-Core BICO-Fasern neue Standards (Halle 4.2 Stand F19).

Im Rahmen seiner Ausstellung auf der Techtextil 2019 wird BFI Innovationen ins Rampenlicht rücken, die es Produzenten ermöglichen, das Maximum aus ihren Produktionsanlagen herauszuholen und neue Möglichkeiten in Bereichen wie Automotive, Geotextilien, Bodenbeläge, Filtertechnologie, Polstern, Betonverstärkung und Hygiene zu nutzen.

Karena Cancilleri, President Engineered Products bei der Beaulieu International Group, kommentiert dies so: „Der Markt für Vliesstoffe ist ständig auf der Suche nach Mehrwert und Möglichkeiten zur Reduzierung der Systemkosten. Mit unseren neuesten Produktinnovationen zeigt Beaulieu Fibres International wieder einmal, dass wir unseren Kunden dabei helfen wollen, in Sachen Branchentrends und Effizienz in der ersten Reihe zu sitzen.“

Weitere Informationen:
Techtextil Techtextil 2019
Quelle:

Beaulieu International Group

Lectra and Faurecia renew their partnership agreement ©lectra
Faurecia Cadillac
26.09.2017

Lectra and Faurecia renew their partnership agreement

  • Lectra contributes to Faurecia Seating Business Group Industry 4.0 readiness and “digital enterprise” transformation initiative

Paris, September 26, 2017 – Lectra, the world leader in integrated technology solutions dedicated to industries using fabrics, leather, technical textiles and composite materials, is pleased to announce the renewal of its partnership with Faurecia through the signing of a global agreement for its Seating Business Group.

The cutting process for the production of seat covers, headrests and interiors is an increasingly strategic part of Faurecia’s Seating activity. Faurecia Seating supplies vehicle complete seats, frames, mechanisms and trim covers to major carmakers worldwide, whose manufacturing processes are gradually evolving toward Industry 4.0.

Faurecia Seating aims to double the production of its existing manufacturing facilities by reinforcing operations with advanced manufacturing technologies. The company’s extended partnership with Lectra entails focusing on operational excellence initiatives across its automotive seating division.

  • Lectra contributes to Faurecia Seating Business Group Industry 4.0 readiness and “digital enterprise” transformation initiative

Paris, September 26, 2017 – Lectra, the world leader in integrated technology solutions dedicated to industries using fabrics, leather, technical textiles and composite materials, is pleased to announce the renewal of its partnership with Faurecia through the signing of a global agreement for its Seating Business Group.

The cutting process for the production of seat covers, headrests and interiors is an increasingly strategic part of Faurecia’s Seating activity. Faurecia Seating supplies vehicle complete seats, frames, mechanisms and trim covers to major carmakers worldwide, whose manufacturing processes are gradually evolving toward Industry 4.0.

Faurecia Seating aims to double the production of its existing manufacturing facilities by reinforcing operations with advanced manufacturing technologies. The company’s extended partnership with Lectra entails focusing on operational excellence initiatives across its automotive seating division.

Standardization of the Vector® fabric-cutting solution—endowed with preventive and predictive maintenance capabilities and the highest-performance cutting system available on the market to date—will be instrumental to the implementation of these initiatives throughout the division’s fabric cutting facilities. Faurecia currently has more than 60 Vector fabric cutting solutions in production worldwide.

“More than ever, we face major challenges in terms of flexibility, agility and productivity—producing more while reducing costs,” observes Hagen Wiesner, Executive Vice President, Faurecia Seating. “Our cutting processes have become strategic in reaching these goals. Faurecia’s ‘digital enterprise’ project aims to achieve operational excellence in virtually every aspect of our organization. Together with Lectra, we will make this a reality in the cutting room, with smart automation and predictive maintenance”.

“Given the profound transformations gripping manufacturing, helping our customers ready their operations for the Fourth Industrial Revolution has become without question our core mission,” remarks Daniel Harari, Lectra Chairman and CEO. “Faurecia is among the automotive suppliers at the forefront of this movement. Digital technologies and industry expertise are the business enablers that will allow manufacturers to connect inside and outside the value chain in the near future.”

Quelle:

Lectra Headquarters / Press Department